能够促进细胞黏附的生物活性表面的制备

报道了一种能够促进细胞黏附的生物活性表面的制备方法.首先通过表面引发原子转移自由基聚合方法在硅表面接枝了聚(N-甲基丙烯酰氧基琥珀酰亚胺)(PNMASI)聚合物刷.随着反应时间的增加,接枝层厚度基本呈线性增长,表明聚合反应具有一定的可控性.蛋白质吸附测试表明PNMASI改性后的表面具有高密度固定生物分子的能力.同时,通...     

Fibronectin displacement at polymer surfaces

The interactions of fibronectin with thin polymer films are studied in displacement experiments using human serum albumin. Fibronectin adsorption and exchange on two different maleic anhydride copolymer surfaces differing in hydrophobicity and surface charge density have been analyzed by quartz crystal microbalance and laser scanning microscopy with respect to adsorbed amounts, viscoelastic properties, and conformation. Fibronectin is concluded to become attached onto hydrophilic surfaces as a "softer", less rigid protein layer, in contrast to the more rigid, densely packed layer on hydrophobic surfaces. As a result, the fibronectin conformation is more distorted on the hydrophobic substrates together with remarkably different displacement characteristics in dependence on the adsorbed fibronectin surface concentration and the displacing albumin solution concentration. While the displacement kinetic remains constant for the strongly interacting surface, an acceleration in fibronectin exchange is observed for the weakly interacting surface with increasing fibronectin coverage. For displaced amounts, no change is determined for the hydrophobic substrate, in contrast to the hydrophilic substrate with a decrease of fibronectin exchange with decreasing coverage leading finally to a constant nondisplaceable amount of adsorbed proteins. Furthermore, the variation of the albumin exchange concentration reveals a stronger dependence of the kinetic for the weakly interacting substrate with higher rates at higher albumin concentrations.     

Efficient One-Step Passivation of Polyurethane Using Transurethanization

The uncontrolled accumulation of biological materials on the surface of medical devices through protein adsorption or cell adhesion causes adverse biological reactions in the living host system, leading to complications. In this study, poly(ethylene glycol) (PEG) is successfully grafted onto polyurethane (PU) surfaces by using a new strategy through a simple and efficient transurethanization reaction. The PEG hydroxyl group is deprotonated and then reacted with the PU surface to provide antiadhesive hydrophilic surfaces in a single step. Surface analysis techniques proved the grafting to be efficient and the formation of a hydrophilic polymeric layer at the surface of PU. Biological assays showed that the surface modification induced lower protein adsorption, cell, platelet, and bacterial adhesion than untreated surfaces, showing a potential for biomedical applications.     

Recombinant tetra-cell adhesion motifs supports adhesion, migration and proliferation of keratinocytes/fibroblasts, and promotes wound healing

An extracellular matrix protein plays an important role in skin wound healing. In the present study, we engineered a recombinant protein encompassing the 9(th) and 10(th) type III domains of fibronectin, and 4(th) FAS1 domain of betaig-h3. This recombinant protein, in total, harbors four known-cell adhesion motifs for integrins: Pro-His-Ser-Arg-Asn (PHSRN) and Arg-Gly-Asp (RGD) in 9(th) and 10(th) type III domains of fibronectin, respectively, and Glu-Pro-Asp-Ile-Met (EPDIM) and Try-His (YH) in 4(th) FAS1 domain of betaig-h3, were designated to tetra-cell adhesion motifs (T-CAM). In vitro studies showed T-CAM supporting adhesion, migration and proliferation of different cell types including keratinocytes and fibroblasts. In an animal model of full-thickness skin wound, T-CAM exhibited excellent wound healing effects, superior to both 4(th) FAS1 domain of betaig-h3 or 9(th) and 10(th) type III domains of fibronectin. Based on these results, T-CAM can be applied where enhancement of cell adhesion, migration and proliferation are desired, and it could be developed into novel wound healing drug.     

UV光引发表面接枝两性离子水凝胶层的制备及抗细菌黏附性能

采用聚合和交联的SiO₂有机/无机杂化溶胶作为基材, 通过与两性离子单体层之间的过渡层, 在紫外光作用下引发杂化溶胶和两性离子单体溶液中的双键反应, 使生成的杂化层在基材和表面的两性离子聚合物之间形成辅助性黏接作用, 从而在基材表面构筑两性离子水凝胶层. 通过傅里叶红外光谱(FTIR)、 原子力显微镜(AFM)和接触角测试等方法对所制备的两性离子水凝胶层和杂化层的表面进行了表征. 以空白玻璃片为对照样品, 以金黄色葡萄球菌和大肠杆菌为试验菌, 研究了用两性离子凝胶层修饰的玻璃表面的抗细菌黏附性能. 结果表明, 在SiO₂杂化过渡层中引入线型-Si-(CH₂)₂-O-链段可有效提高杂化过渡层对基材的附着力, 并改善其柔韧性. 与对照样品相比, 用两性离子凝胶层修饰的玻璃表面具有优异的抗菌黏附性能.     

My voyage of discovery to proteins in flatland ...and beyond

The 9th-10th type III fibronectin domain pair (9-10FNIII) has found widespread use as a biomimetic surface for cell adhesion. However, the effect of mutations to 9-10FNIII on its surface adsorption characteristics have not been investigated. Here we address this issue using total internal reflection fluorescence (TIRF) and circular dichroism spectroscopy, comparing two conformationally stable 9-10FNIII mutants against the wild type. Desorption of the 9-10FNIII mutants from the silica surface was minimal in comparison to desorption of 9-10FNIII. The extent and rate of protein desorption from silica was empirically matched by loss of secondary structure upon adsorption, with only the spectrum for 9-10FNIII showing extensive loss of the beta-sandwich fold. For the proteins adsorbed to hydrophobic surfaces, only the CD spectra for the 9-10FNIII mutant constrained via an interdomain disulphide bridge showed similarity with the corresponding solution structure. Since the binding of 9-10FNIII to integrin alpha5beta1 is highly dependent on the relative spatial arrangement of the two domains, we suggest that the observed differences in cell adhesion and spreading on wild type 9-10FNIII and mutants may in part be attributed to the extent of protein desorption and unfolding at the surface.     

Structure of Protein Layers during Competitive Adsorption

The formation of protein layers during competitive adsorption was studied with ellipsometry. Single, binary, and ternary protein solutions of human serum albumin (HSA), IgG, and fibrinogen (Fgn) were investigated at concentrations corresponding to blood plasma diluted 1/100. As a model surface, hydrophobic hexamethyldisiloxane (HMDSO) plasma polymer modified silica was used. By using multiambient media measurements of the bare substrate prior to protein adsorption the adsorbed amount as well as the thickness and refractive index of the adsorbed protein layer could be followedin situand in real time. Under conditions used in these experiments neither IgG nor fibrinogen could fully displace serum albumin from the interface. The buildup of the protein layer occurred via different mechanisms for the different protein systems. Fgn adsorbed in a rather flat orientation at low adsorbed amounts, while at higher surface coverage the protein reoriented to a more upright orientation in order to accommodate more molecules in the adsorbed layer. IgG adsorption proceeded mainly end-on with little reorientation or conformational change on adsorption. Finally, for HSA an adsorbed layer thickness greater than the molecular dimensions was observed at high concentrations (although not at low), indicating that aggregates or multilayers formed on HMDSO plasma polymer surfaces. For all protein mixtures the adsorbed layer structure and buildup indicated that Fgn was the protein dominating the adsorbed layer, although HSA partially blocked the adsorption of this protein. At high surface concentration, HSA/Fgn mixtures show an abrupt change in both adsorbed layer thickness and refractive index suggesting, e.g., an interfacial phase transition of the mixed protein layer. A similar but less pronounced behavior was observed for HSA/IgG. For IgG/Fgn and HSA/IgG/Fgn a buildup of the adsorbed layer similar to that displayed by Fgn alone was observed.     

Dynamic alterations of fibronectin layers on copolymer substrates with graded physicochemical characteristics

Desorption and exchange of preadsorbed fibronectin layers in pure buffer solution and solutions of human serum albumin or fibronectin, respectively, were studied in dependence on the physicochemical characteristics of maleic acid copolymer films used as substrates. Although the preadsorbed amount of fibronectin differed only slightly, the protein was found to exhibit a significantly enhanced anchorage at the more hydrophobic polymer surface as compared to the more hydrophilic and more negatively charged polymer surface. The preadsorbed fibronectin layer was most efficiently exchanged by fibronectin (i.e., in the homodisplacement process) while pure buffer solution and human serum albumin solutions induced desorption or exchange of fibronectin to lower and similar degrees. An increase of the total adsorbed amount of protein due to additional adsorption of fibronectin or human serum albumin accompanied the partial exchange of the preadsorbed fibronectin in the displacement experiments. Evaluation of the kinetics of desorption and exchange of fibronectin at any of the substrates revealed two kinds of surface-attached protein populations--a fast desorbing species and a species with a slow desorption and exchange rate. By a multivariate regression analysis the surface characteristics of the polymer substrate were confirmed to determine the degree of protein desorption and exchange while the dynamics of the layer alteration was found to solely depend on the diffusion behavior of the proteins.     

Protein adhesion on silicon-supported hyperbranched poly(ethylene glycol) and poly(allylamine) thin films

Hyperbranching poly(allylamine) (PAAm) and poly(ethylene glycol) (PEG) on silicon and its effect on protein adhesion was investigated. Hyperbranching involves sequential grafting of polymers on a surface with one of the components having multiple reactive sites. In this research, PAAm provided multiple amines for grafting PEG diacrylate. Current methodologies for generating PEG surfaces include PEG-silane monolayers or polymerized PEG networks. Hyperbranching combines the nanoscale thickness of monolayers with the surface coverage afforded by polymerization. A multistep approach was used to generate the silicon-supported hyperbranched polymers. The silicon wafer surface was initially modified with a vinyl silane followed by oxidation of the terminal vinyl group to present an acid function. Carbodiimide activation of the surface carboxyl group allowed for coupling to PAAm amines to form the first polymer layer. The polymers were hyperbranched by grafting alternating PEG and PAAm layers to the surface using Michael addition chemistry. The alternating polymers were grafted up to six total layers. The substrates remained hydrophilic after each modification. Static contact angles for PAAm (32-44 degrees) and PEG (33-37 degrees) were characteristic of the corresponding individual polymer (30-50 degrees for allylamine, 34-42 degrees for PEG). Roughness values varied from approximately 1 to 8 nm, but had no apparent affect on protein adhesion. Modifications terminating with a PEG layer reduced bovine serum albumin adhesion to the surface by approximately 80% as determined by ELISA and radiolabel binding studies. The hyperbranched PAAm and PEG surfaces described in this paper are nanometer-scale, multilayer films capable of reducing protein adhesion.     

High fidelity functional patterns of an extracellular matrix protein by electron beam-based inactivation

Controlling the organization of proteins on surfaces provides a powerful biochemical tool for determining how cells interpret the spatial distribution of local signaling molecules. Here, we describe a general high fidelity approach based on electron beam writing to pattern the functional properties of protein-coated surfaces at length scales ranging from tens of nanometers to millimeters. A silicon substrate is first coated with the extracellular matrix protein fibronectin, which is then locally inactivated by exposure to a highly focused electron beam. Biochemical inactivation of the protein is established by the loss of antibody binding to the fibronectin. Functional inactivation is determined by the inability of cells to spread or form focal adhesions on the inactivated substrate, resulting in cell shapes constrained to the pattern, while they do both (and are unconstrained) on the remaining fibronectin. These protein patterns have very high fidelity, and typical patterns agree with the input dimensions of the pattern to within 2%. Further, the feature edges are well defined and approach molecular dimensions in roughness. Inactivation is shown to be dose dependent with observable suppression of the specific binding at 2 microC cm(-2) and complete removal of biochemical activity at approximately 50 microC cm(-2) for 5 keV electrons. The critical dose for inactivation also depends on accelerating voltage, and complete loss of antibody binding was achieved at approximately 4-7 microC cm(-2) for 1 keV electrons, which corresponds to approximately 50-90 electrons per cross-sectional area of a whole fibronectin dimer and ~2-4 electrons per type III fibronectin domain. AFM analysis of the pattern surfaces revealed that electron beam exposure does not remove appreciable amounts of material from the surface, suggesting that the patterning mechanism involves local inactivation rather than the ablation that has been observed in several organic thin film systems.     

Staphylococcus aureus adhesion to self-assembled monolayers: effect of surface chemistry and fibrinogen presence

Staphylococcus aureus adhesion on self-assembled monolayers (SAMs) formed by the adsorption of alkanethiols on transparent gold films has been studied in real time under well-defined flow conditions using a radial flow chamber and an automated videomicroscopy system. SAMs terminated with methyl, hydroxyl, carboxylic acid and tri(ethylene oxide) groups were investigated. SAMs were characterized using contact angle measurements, ellipsometry and X-ray photoelectron spectroscopy. Adhesion experiments using the Newman strain of S. aureus were performed on bare monolayers and monolayers pre-incubated with fibrinogen. Adhesion was found to be lowest on the ethylene oxide-bearing surfaces, followed by the hydroxyl surfaces. Adhesion on the carboxylic- and methyl-terminated SAMs was much higher. Bacterial adhesion was higher on the hydrophobic surfaces. Pre-incubation of surfaces with fibrinogen minimized the effect of the surface properties of the substrate. Adhesion was increased on all surfaces when fibrinogen was present and no significant differences were observed between adhesion to the different SAMs. This study showed that surfaces rich in ethylene oxide groups can be effectively used to prevent bacterial adhesion. However, under physiological conditions, most of the substrate properties are masked by the presence of the adsorbed protein layer and the effect of substrate properties on bacteria adhesion under flow is minimal.     

Adsorption of lipid-functionalized poly(ethylene glycol) to gold surfaces as a cushion for polymer-supported lipid bilayers

Inclusion of a polymer cushion between a lipid bilayer membrane and a solid surface has been suggested as a means to provide a soft, deformable layer that will allow for transmembrane protein insertion and mobility. In this study, the properties of a heterofunctional, telechelic PEG lipopolymer (1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethylene glycol)-2000-N- [3-(2-(pyridyldithio)propionate]) (DSPE-PEG-PDP) adsorbed from ethanol and water solutions onto gold surfaces were studied using a variety of surface-sensitive techniques. X-ray photoelectron spectroscopy showed that the PEG molecules are tethered to the gold surface via thiolate bonds. When adsorbed from water, ethanol, or their mixtures, reflection-absorption infrared spectroscopy showed that amorphous PEG layers with disordered DSPE alkyl chains were formed, independent of adsorption time or solution concentration. On the basis of advancing and receding water and hexadecane contact angles on the lipopolymer films, the DSPE lipid groups appear to segregate from the PEG layer and become exposed at the surface of the polymer films. Swelling observed in surface plasmon resonance experiments and the large contact angle hysteresis observed indicate that highly swellable, mobile films capable of molecular rearrangements are formed. The self-assembling and amorphous properties of these PEG layers make them ideal candidates as polymer cushions for polymer-supported lipid bilayers. The DSPE surface concentration can be controlled, to a limited degree, by varying the adsorption time of DSPE-PEG-PDP from ethanol. A more effective strategy is to coadsorb DSPE-PEG-PDP with a non-lipid-functionalized PEG-PDP from an ethanol/water mixture, which allows the PEG thickness and density to remain constant while decreasing the density of DSPE groups.     

Interfacial interactions and the polymer/polyurethane bond

Lap shear measurements of adhesion in joints of polymers bonded with polyurethane adhesives varied significantly with time at elevated temperature. The effect has been linked with the ability of polyurethane molecules to restructure in response to the orienting strength of substrate surfaces, as defined by their non-dispersive surface energy component. Acid/base interactions at the polymer/adhesive interface further affect the bond strength, increasing this important property when acid/base pairs are located at the interface, and diminishing the variable when acid/base interactions are absent.     

Adsorption and conformation behavior of biotinylated fibronectin on streptavidin-modified TiO(X) surfaces studied by SPR and AFM

It is well-known that protein-modified implant surfaces such as TiO(2) show a higher bioconductivity. Fibronectin is a glycoprotein from the extracellular matrix (ECM) with a major role in cell adhesion. It can be applied on titanium oxide surfaces to accelerate implant integration. Not only the surface concentration but also the presentation of the protein plays an important role for the cellular response. We were able to show that TiO(X) surfaces modified with biotinylated fibronectin adsorbed on a streptavidin-silane self-assembly multilayer system are more effective regarding osteoblast adhesion than surfaces modified with nonspecifically bound fibronectin. The adsorption and conformation behavior of biotinylated and nonbiotinylated (native) fibronectin was studied by surface plasmon resonance (SPR) spectroscopy and atomic force microscopy (AFM). Imaging of the protein modification revealed that fibronectin adopts different conformations on nonmodified compared to streptavidin-modified TiO(X) surfaces. This conformational change of biotinylated fibronectin on the streptavidin monolayer delivers a fibronectin structure similar to the conformation inside the ECM and therefore explains the higher cell affinity for these surfaces.     

Surface grafting of PEO-based star-shaped molecules for bioanalytical and biomedical applications

This article reviews surface grafting of star-shaped PEO. The use of star-shaped polymers is compared to linear PEO chains regarding the layer preparation and the ability of the resulting surfaces to resist protein adsorption. We then focus on the use of end-functionalized, star-shaped, PEO-based prepolymers that are able to form covalent crosslinks and functional polymer networks on the substrate. Examples are given for specific protein adsorption as well as for cell adhesion on such layers by covalent embedding of biofunctional molecules. The possibility of coating biomedically relevant polymer substrates in three-dimensional geometries is discussed and examples are shown for poly(ethylene terephthalate) monofilament constructs.     

Thin layers of cellulose derivatives - selected analytical aspects

New hairy-rod like cellulose polymer layers were developed as a model system for corrosion protection and adhesion promotion in medical technology. Using the Langmuir-Blodgett technique a mixture of a cinnemate containing and a phosphate containing cellulose were transferred on titanium and steel surfaces. The cinnemate can be crosslinked by ultraviolet light (UV). Differences in the formation of multilayers were found and analyzed by atomic force microscopy, scanning auger microscopy and ellipsometric measurements. Phosphate cellulose forms homogenous layers at all substrate surfaces. With increasing layer thickness a mixture with low phosphate content becomes homogenous, too. Only mixtures with high content of phosphate keep imperfections with increasing layer thickness. For the pure component cinnemate cellulose the imperfections arise only in the case of titanium surfaces.     

Ellipsometry studies of fibronectin adsorption

The adsorption of fibronectin on a series of different surfaces was investigated with in situ ellipsometry. For silica and methylated silica, the adsorbed amount (Γ), the adsorbed layer thickness (δ_el) and the mean adsorbed layer refractive index (n_f) were obtained by a procedure involving studies of the bare substrate at two different ambient refractive indices, as well as four-zone averaging. It was found that the adsorbed amount of fibronectin was the same (1.9 ± 0.1 mg m⁻²) on both silica and methylated silica surfaces. However, the adsorbed layers formed on methylated silica were more extended and had a lower average protein concentration than those formed on silica. Furthermore, on both silica and methylated silica, an increasing adsorbed amount is achieved both by a denser packing of the fibronectin molecules and by a growth of the adsorbed layer normal to the surface. Furthermore, the adsorption of fibronectin on lipid surfaces was investigated. It was found that the adsorption of fibronectin on phosphatidic acid was quite significant (2.2 ± 0.2 mg m⁻²), while that on phosphatidylcholine, phosphatidylinositol and phosphatidylserine was much smaller (all 0.1 ± 0.05 mg m⁻²). These results are correlated to findings on the adsorption of fibrinogen on these surfaces, as well as on the opsonization of lipid-stabilized colloidal particles.     

Robust Hydrogel Adhesive with Dual Hydrogen Bond Networks

Hydrogel adhesives are attractive for applications in intelligent soft materials and tissue engineering, but conventional hydrogels usually have poor adhesion. In this study, we designed a strategy to synthesize a novel adhesive with a thin hydrogel adhesive layer integrated on a tough substrate hydrogel. The adhesive layer with positive charges of ammonium groups on the polymer backbones strongly bonds to a wide range of nonporous materials’ surfaces. The substrate layer with a dual hydrogen bond system consists of (i) weak hydrogen bonds between N,N-dimethyl acrylamide (DMAA) and acrylic acid (AAc) units and (ii) strong multiple hydrogen bonds between 2-ureido-4[1H]-pyrimidinone (UPy) units. The dual hydrogen-bond network endowed the hydrogel adhesives with unique mechanical properties, e.g., toughness, highly stretchability, and insensitivity to notches. The hydrogel adhesion to four types of materials like glass, 316L stainless steel, aluminum, Al₂O₃ ceramic, and two biological tissues including pig skin and pig kidney was investigated. The hydrogel bonds strongly to dry solid surfaces and wet tissue, which is promising for biomedical applications.     

Covalent grafting of fibronectin onto plasma-treated PTFE: influence of the conjugation strategy on fibronectin biological activity

Surface coating of synthetic materials is often considered to improve biomedical devices biocompatibility. In this study, we covalently bound fibronectin (FN) onto ammonia plasma-treated PTFE via two crosslinkers, namely glutaric anhydride (GA) and sulfosuccinimidyl-4-(p-maleimidophenyl)butyrate (sulfo-SMPB). With respect to clean PTFE, cell adhesion increased markedly on both FN grafted surfaces, although it was twice higher on PTFE-GA-FN than on PTFE-SMPB-FN. ELISA experiments performed with a polyclonal antibody revealed that the amount of FN is identical on both surfaces while monoclonal antibody specific to the RGD binding site clearly demonstrated a greater availability when FN is surface grafted through GA. These results provide evidence of a variation in protein conformation correlated with the surface conjugation strategy.     

Blood compatibility of polyurethane surface grafted copolymerization with sulfobetaine monomer

Surface modification is an effective way to improve the hemocompatibility and remain bulk properties of biomaterials. Recently, polymer tailed with zwitterions was found having good blood compatibility. In this study, the grafting copolymerization of sulfobetaine onto polyurethane surface was obtained through two steps. In the first step, polyurethane film coupled with vinyl groups was obtained through the reaction between the carboxyl group of acrylic acid (AA) and the NH-urethane group of polyurethane by dicyclohexylcarbodiimide (DCC). In the second step, sulfobetaine was grafted copolymerization on the surface using AIBN as an initiator. The reaction process was monitored with ATR-IR spectra and X-ray photoelectron spectroscopy (XPS) spectra. The wettability of films was investigated by water contact angle measurement. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma (PRP) and protein absorption in bovine fibrinogen (BFG). Low platelet adhesion was observed on the grafted films incubated in PRP for 1 and 3 h, respectively. The protein absorption was reduced on the grafted films after incubated in bovine fibrinogen for 2 h. All of these results revealed that the improved blood compatibility was obtained by grafting copolymerization with zwitterionic monomer of sulfobetaine onto polyurethane film. In addition, introducing vinyl groups onto surface through DCC and AA is a novel method to functionalize polyurethane for further modification.