Carbon Nanotubes/Ionophore Modified Electrode for Anodic Stripping Determination of Lead

Bifunctional combination of carbon nanotubes and ionophore is introduced for anodic stripping analysis of lead (Pb²⁺). Carbon nanotubes are employed to improve the detection sensitivity due to their excellent electrical conductivity and strong adsorption ability. An ionophore is utilized for its excellent selectivity toward Pb²⁺. The proposed carbon nanotubes/ionophore modified electrode shows improved sensitivity and selectivity for Pb²⁺. Low detection limit (1 nM), wide linear range (5 nM–8 µM) and excellent selectivity over other metal ions (Cd²⁺, Cu²⁺, and Hg²⁺) was obtained. The practical application has been carried out for determination of Pb²⁺ in real water samples.     

Electrochemical detection of blood lead based on the enhancement effect of copper

The anodic stripping peak current of lead on the glassy carbon electrode surface was greatly increased in the presence of high concentration of copper ion. The effects of supporting electrolyte, concentration of Cu²⁺, accumulation potential and accumulation time were studied on the stripping peak current of Pb²⁺. As a result, a sensitive, simple and rapid electrochemical method was developed for the detection of lead. In 0.01 M HNO₃ solution containing 800 g,g L^?1 Cu²⁺, the stripping peak current of Pb²⁺ increases linearly with its concentration over the range from 2 to 100 μg L^?1. The detection limit is 1 μg L^?1 after 4-min accumulation at ?0.8 V. It was used to detect the concentration of lead in blood samples, and the results consisted with the values that obtained by atomic absorption spectrometry.     

Anodic Stripping Voltammetry of Heavy Metals on a Metal Catalyst Free Carbon Nanotube Electrode

Anodic stripping voltammetry (ASV) determination of Pb²⁺, Cd²⁺, and Zn²⁺ was done using metal catalyst free carbon nanotube (MCFCN) electrodes. Osteryoung square wave stripping voltammetry (OSWSV) was selected for detection. The MCFCNTs are synthesized via Carbo Thermal Carbide Conversion method which leads to residual transition metal free in the CNT structure. The new material shows very good results in detecting heavy metal ions, such as Pb²⁺, Cd²⁺, and Zn²⁺. The calculated limits of detection were 13 nM, 32 nM and 50 nM for Pb²⁺, Cd²⁺ and Zn²⁺, respectively with a deposition time of 150 s.     

Electrochemical Determination of Cd2+ and Pb2+ Using NSAID‐mefenamic Acid Functionalized Mesoporous Carbon Microspheres Modified Glassy Carbon Electrode

This paper describes the electrochemical behaviors of Cd²⁺ and Pb²⁺ on the proposed mesoporous carbon microspheres/mefenamic acid/nafion modified glassy carbon electrode (MC/MA/Nafion/GC) studied by square wave anodic stripping voltammetry (SWASV). The prepared material is characterized by XRD, SEM, FTIR, RAMAN and BET analysis. Experimental parameters, such as the deposition potential and time, the pH value of buffer solution were optimized. Under the optimized conditions, the electrode responded linearly to Cd²⁺ and Pb²⁺ in the concentration range from 50 to 300 nM, and the detection limits were 24.2 and 11.26 nM respectively. The sensitivity determined was 0.0623 μA/nM (Cd²⁺) and 0.192 μA/nM (Pb²⁺). Multiple metal ion detection with clear demarcation of peaks was produced by the electrode. Moreover, the modified electrode has possessed good selectivity and reproducibility of Cd²⁺ and Pb²⁺ detection. We also investigated the interference of various anions and surfactants for the detection of Cd²⁺ and Pb²⁺ ions. Finally the modified electrode was used to detect the presence of metal ions in practical samples and the results obtained are comparatively good with respect to AAS.     

ABTS‐Multiwalled Carbon Nanotubes Nanocomposite/Bi Film Electrode for Sensitive Determination of Cd and Pb by Differential Pulse Stripping Voltammetry

A 2,2′‐azinobis (3‐ethylbenzothiazoline‐6‐sulfonate) diammonium salt (ABTS)‐multiwalled carbon nanotubes (MWCNTs) nanocomposite/Bi film modified glassy carbon (GC) electrode was constructed for the differential pulse stripping voltammetric determination of trace Pb²⁺ and Cd²⁺. This electrode was more sensitive than ABTS‐free Bi/GC and Bi/MWCNTs/GC electrodes. Linear responses were obtained in the range from 0.5 to 35 μg L^?1 for Cd²⁺ and 0.2 to 50 μg L^?1 Pb(II), with detection limits of 0.2 μg L^?1 for Cd²⁺ and 0.1 μg L^?1 for Pb²⁺, respectively. This sensor was applied to the simultaneous detection of Cd²⁺ and Pb²⁺ in water samples with satisfactory recovery.     

Facile and Simultaneous Stripping Determination of Zinc,Cadmium and Lead on Disposable Multiwalled Carbon Nanotubes Modified Screen‐Printed Electrode

Screen‐printed electrodes (SPEs) are cheap and disposable. But their application for heavy metal detection is limited due to the low sensitivity and poor selectivity. Here we report the ultrasensitive and simultaneous determination of Zn²⁺, Cd²⁺ and Pb²⁺ on a multiwalled carbon nanotubes and Nafion composite modified SPE with in situ plated bismuth film (MWCNTs/NA/Bi/SPE). The linear curves range from 0.5–100 µg L^?1 for Zn²⁺ and 0.5–80 µg L^?1 for Cd²⁺. Uniquely, the linear curve for Pb²⁺ ranges from 0.05–100 µg L^?1 with a detection limit of 0.01 µg L^?1. The practical application was verified in real samples with satisfactory results.     

Determination of Trace Lead and Cadmium in Water Samples by Anodic Stripping Voltammetry with a Nafion‐Ionic Liquid‐Coated Bismuth Film Electrode

A new chemically modified bismuth film electrode coated with an ionic liquid [(1‐ethyl‐3‐methylimidazolium tetracyanoborate (EMIM TCB)] and Nafion was developed for the simultaneous determination Pb²⁺ and Cd²⁺ by anodic stripping voltammetry. Compared with conventional bismuth film electrodes, this electrode exhibited greatly improved electrochemical activity for Pb²⁺ and Cd²⁺ detection due to the unique properties of Nafion polymer and ionic liquid. The key experimental parameters related to the fabrication of the electrode and the voltammetric measurements were optimized on the basis of the stripping signals, where the peak currents increased linearly with the metal concentrations in a range of 10–120 µg L^?1 with a detect limit of 0.2 µg L^?1 for Pb²⁺, and 0.5 µg L^?1 for Cd²⁺ for 120s deposition. High reproducibility was indicated from the relative standard deviations (1.9 and 2.5 %) for nine repetitive measurements of 20 µg L^?1 Pb²⁺ and Cd²⁺, respectively. In addition, the surface characteristics of the modified BiFE were investigated by scanning electron microscopy (SEM), and results showed that fibril‐like bismuth nanostructures were formed on the porous Nafion polymer matrix. Finally, the developed electrode was applied to determine Pb²⁺ and Cd²⁺ in water samples, indicating that this electrode was sensitive, reliable and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.     

Simultaneous Titration of Ternary Mixtures of Pb(II), Cd(II) and Cu(II) with Potentiometric Electronic Tongue Detection

An automatic titration method is reported to resolve ternary mixtures of transition metals (Pb²⁺, Cd²⁺ and Cu²⁺) employing electronic tongue detection and a reduced number of pre‐defined additions of EDTA titrant. Sensors used were PVC membrane selective electrodes with generic response to heavy‐metals, plus an artificial neural network response model. Detection limits obtained were ca. 1 mg L^?1 for the three target ions and reproducibilities 3.0 % for Pb²⁺, 4.1 % for Cd²⁺ and 5.2 % for Cu²⁺. The system was applied to contaminated soil samples and high accuracy was obtained for the determination of Pb²⁺. In the determination Cd²⁺ and Cu²⁺, sample matrix showed a significant effect.     

Sensitive and Simple Electrochemical Detection of Lead(II) with Carbon Ionic Liquid Electrode

In this paper a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid 1‐ethyl‐3‐methylimidazolium ethylsulphate ([EMIM]EtOSO₃) as the modifier and further used as the working electrode for the sensitive anodic stripping voltammetric detection of Pb²⁺. The characteristics of the CILE were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In pH 4.5 NaAc‐HAc buffer Pb²⁺ was accumulated on the surface of CILE due to the extraction effect of IL and reduced at a negative potential (‐1.20 V). Then the reduced Pb was oxidized by differential pulse anodic stripping voltammetry with an obvious stripping peak appeared at ?0.67 V. Under the optimal conditions Pb²⁺ could be detected in the concentration range from 1.0 × 10^?8 mol/L to 1.0 × 10^?6 mol/L with the linear regression equation as I_p(μA) = ?0.103 C (μmol/L) + 0.0376 (γ = 0.999) and the detection limit as 3.0 × l0^?9 mol/L (3σ). Interferences from other metal ions were investigated and Cd²⁺ could be simultaneously detected in the mixture solution. The proposed method was further applied to the trace levels of Pb²⁺ detection in water samples with satisfactory results.     

A Novel Sensitive Method for the Determination of Cadmium and Lead Based on Magneto‐Voltammetry

Abstract

A novel method for the ultratrace determination of Cd²⁺ and Pb²⁺ based on magneto‐voltammetry was developed. In the presence of a low strength magnetic field of 0.6 T, square wave stripping voltammetry (SWSV) of Cd²⁺ and Pb²⁺ was performed in this determination. A high concentration of redox species Fe³⁺ was added to the analytes to generate a large cathodic current during the preconcentration step. A large Lorentz force arising from the flux of net current through the magnetic field resulted in convective solution flow due to magnetohydrodynamics. Then more metal ions deposited on the electrode surface at a faster rate and an enhancement as large as 160% for the stripping peak current was observed. Under the optimal conditions, this method exhibits high sensitivities of 5.67 µA µM^?1 for Cd²⁺ and 6.98 µA µM^?1 for Pb²⁺, over the 1×10^?8 – 1×10^?6 mol l^?1 range. Detection limits as low as 9.0×10^?10 and 8.6×10^?10 mol l^?1 for Cd²⁺ and Pb²⁺ were obtained with a 2 min preconcentration time, respectively. The method was successfully applied to detect Cd²⁺ and Pb²⁺ in real water samples and the results were in agreement with atomic absorption spectrometry.     

Simultaneous Detection of Heavy Metals by Anodic Stripping Voltammetry Using Carbon Nanotube Thread

Carbon nanotube (CNT) threads are a type of CNT arrays that consist of super long CNTs. CNT threads inherit the advantages of CNTs, while avoiding the potential toxicity caused by individual CNTs. Electrodes based on CNT threads were fabricated and used for simultaneous detection of trace levels of Cu²⁺, Pb²⁺ Cd²⁺ and Zn²⁺ by anodic stripping voltammetry (ASV). The detection limits are 0.27 nM, 1.5 nM, 1.9 nM and 1.4 nM for Cu^2+, Pb²⁺, Cd²⁺ and Zn²⁺, respectively, in 0.1 M acetate buffer pH 4.5. The CNT thread electrode gives well‐defined, reproducible and sharp stripping signals for individual and simultaneous detection of heavy metals.     

Voltammetric Simultaneous Determination of Cu2+, Cd2+ and Pb2+ in Full Aqueous Medium Using Organic Nanoparticles of Disulfide Based Receptor

Disulfide based receptor was prepared using single step condensation reaction and suspended into organic nanoparticles to extend its practical application in aqueous samples. The prepared nanoparticles were used for the simultaneous recognition of three different metallic species (Cu²⁺, Cd²⁺, and Pb²⁺) in aqueous media through voltammetric studies. These metals can be determined simultaneously and without interferences from any of the other potential interferent metal ions, as different signals are displayed in cyclic as well as differential pulse voltammograms, with a detection limit of 193.0 nM for Cu²⁺, 52.0 nM for Cd²⁺ and 32.0 nM for Pb²⁺. The study was extended to real sample analysis by preparing the artificial mixtures of said metal ions.     

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection

Nanostructured magnesium silicate hollow spheres, one kind of non-conductive nanomaterials, were used in heavy metal ions (HMIs) detection with enhanced performance for the first time. The detailed study of the enhancing electrochemical response in stripping voltammetry for simultaneous detection of ultratrace Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ was described. Electrochemical properties of modified electrodes were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The operational parameters which have influence on the deposition and stripping of metal ions, such as supporting electrolytes, pH value, and deposition time were carefully studied. The anodic stripping voltammetric performance toward HMIs was evaluated using square wave anodic stripping voltammetry (SWASV) analysis. The detection limits achieved (0.186 nM, 0.247 nM, 0.169 nM and 0.375 nM for Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺) are much lower than the guideline values in drinking water given by the World Health Organization (WHO). In addition, the interference and stability of the modified electrode were also investigated under the optimized conditions. An interesting phenomenon of mutual interference between different metal ions was observed. Most importantly, the sensitivity of Pb²⁺ increased in the presence of certain concentrations of other metal ions, such as Cd²⁺, Cu²⁺ and Hg²⁺ both individually and simultaneously. The proposed electrochemical sensing method is thus expected to open new opportunities to broaden the use of SWASV in analysis for detecting HMIs in the environment.     

A novel method for the simple and simultaneous preconcentration of Pb2+, Cu2+ and Zn2+ ions with aid of diethylenetriamine functionalized SBA-15 nanoporous silica compound

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺, Cu²⁺ and Zn²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with diethylenetriamine groups and flame atomic absorption spectrometry (FAAS) is presented. The preconcentration factor of the method is 100 and detection limit of the technique is 5.5?ng?mL^?1 and 1.4?ng?mL^?1 and 0.1?ng?mL^?1 for Pb²⁺, Cu²⁺ and Zn²⁺ respectively. The time and the optimum amount of the sorbent, pH and minimum amount of acid for stripping of ions from functionalized SBA-15 were tested. The maximum capacity the functionalized SBA-15 was found to be 183.0 (±1.9) µg, 156.0 (±1.5) µg and 80.0 (±1.6) µg of Pb²⁺, Cu²⁺ and Zn²⁺/mg functionalized SBA-15, respectively.     

SBA-15/Metformin as a novel sorbent combined with surfactant-assisted dispersive liquid–liquid microextraction (SA-DLLME) for highly sensitive determination of Pb,Cd and Ni in food and environmental samples

This paper established a new, rapid and sensitive method for the ultra-trace determination of lead, cadmium and nickel in food and environmental samples preconcentrated by dispersive solid-phase extraction (DSPE) combined with surfactant-assisted dispersive liquid–liquid microextraction (SA-DLLME) prior to graphite furnace atomic absorption spectrometry. SBA-15/Met was synthesized and used as a new efficient sorbent for the extraction of metal ions in DSPE. It was characterized by TEM and TGA techniques. After DSPE step, stripped metal elements were complexed with dithizone, and then, the complexes were extracted into carbon tetrachloride by using SA-DLLME. A conventional nonionic surfactant, triton X-100 was used as a disperser agent. Under the optimized conditions, the limit of quantifications was found to be 2.5 ng L^?1 for Pb²⁺, Cd²⁺ and 5.0 ng L^?1 for Ni²⁺. The limits of detection were 1.5 ng L^?1 for Ni²⁺ and 0.75 ng L^?1 for Pb²⁺ and Cd²⁺, with enrichment factor of 1650. The optimized method exhibited a good precision level with relative standard deviations (RSDs%) values of 4.9, 5.2 and 5.0% for 1 μg L^?1 Pb²⁺, Cd²⁺ and Ni²⁺, respectively (n = 7). Application of the proposed method to the analysis of fish-certified reference material produced results that were in good agreement with the certified values.     

Electrochemical sensor for Cd2+ and Pb2+ detection based on nano-porous pseudo carbon paste electrode

An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode (nano-PPCPE) has been successfully developed, and used to detect Cd²⁺ and Pb²⁺. The experimental results showed that the electrochemical performance of nanoPPCPE is evidently better than both glassy carbon electrode (GCE) and pure carbon paste electrode (CPE). Then the prepared nano-PPCPE was applied to detect Cd²⁺ and Pb²⁺ in standard solution, the results showed that the electrodes can quantitatively detect trace Cd²⁺ and Pb²⁺, which has great significance in electrochemical analysis and detection. The linear ranges between the target ions concentration and the DPASV current were from 0.1–3.0 μmol/L, 0.05–4.0 μmol/L for Cd²⁺ and Pb²⁺, respectively. And the detection limits were 0.0780 μmol/L and 0.0292 μmol/L, respectively. Moreover, the preparation of the nano-PPCPE is cheap, simple and has important practical value.     

Complexation of metal ions with the novel diazadithia crown ethers carrying two pyrene pendants in acetonitrile-tetrahydrofuran

Two crown ethers carrying pyrene side arms with nitrogen-sulfur donor atom were designed and synthesized by the reaction of the corresponding macrocyclic compounds and 1-bromomethyl-pyrene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligands was investigated in acetonitrile-tetrahydrofuran (1:1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Al³⁺, Zn²⁺, Fe²⁺, Ni²⁺, Cu²⁺, and Pb²⁺ with 16-membered crown ether. Similar results were obtained for Al³⁺, Fe²⁺, Hg²⁺, Cu²⁺ and Pb²⁺ with 14-membered crown ether. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constants of the novel ligands with these cations. According to spectrofluorimetric titration measurements the 14-membered diazadithia crown ether showed sensitivity for Pb²⁺ with linear range and detection limit of 1.3 × 10^?6 to 5.2 × 10^?5 M and 5.2 × 10^?7 M, respectively. The 16-membered diazadithia crown ether showed sensitivity for Ni²⁺ with linear range and detection limit of 1.3 × 10^?7 to 5.2 × 10^?6 M and 4.1 × 10^?8 M, respectively.     

Ordered Mesoporous Carbon and Thiolated Polyaniline Modified Electrode for Simultaneous Determination of Cadmium(II) and Lead(II) by Anodic Stripping Voltammetry

The fabrication and evaluation of a glassy carbon electrode (GCE) modified with ordered mesoporous carbon (OMC), 2‐mercaptoethanesulfonate (MES)‐tethered polyaniline (PANI) and bismuth for simultaneous determination of trace Cd²⁺ and Pb²⁺ by differential pulse anodic stripping voltammetry (DPASV) are presented here. The morphology and electrochemical properties of the fabricated electrode were respectively characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Experimental parameters such as PANI disposition, preconcentration potential, preconcentration time and bismuth concentration were optimized. Under optimum conditions, the fabricated electrode exhibited linear calibration curves ranged from 1 to 120 nM for Cd²⁺ and Pb²⁺. The limits of detection (LOD) were 0.26 nM for Cd²⁺ and 0.16 nM for Pb²⁺ (S/N=3), respectively. Additionally, repeatability, reproducibility, interference and application were also investigated, and the proposed electrode exhibited excellent performance. The proposed method could be extended for the development of other new sensors for heavy metal determination.     

Fluorescence-enhanced optical sensor for detection of Al<Subscript>3+</Subscript> in water based on functionalised nanoporous silica type SBA-15

An organic–inorganic hybrid optical sensor (PQ-SBA-15) was designed and prepared through functionalisation of the SBA-15 surface with 3-piperazinepropyltriethoxysilane followed by covalently attaching 8-hydroxyquinoline. Characterisation techniques, including FT-IR, thermal gravimetric, N2 adsorption-desorption and X-ray powder diffraction analyses, showed that the organic moieties were successfully grafted onto the surface of SBA-15 without the SBA-15 structure collapsing. The evaluation of the sensing ability of PQ-SBA-15 using fluorescence spectroscopy revealed that the PQ-SBA-15 was a selective fluorescence enhancement-based optical sensor for Al³⁺ in water in the presence of a wide range of metal cations including Na⁺, Mg²⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ with a limit of detection of 8.8 × 10–7 M. In addition, good linearity was observed between the fluorescence intensity and the concentration of Al³⁺.     

Electrodes with extremely high hydrogen overvoltages as substrate electrodes for stripping analysis based on bismuth-coated electrodes

Hydrogen evolution bothers stripping analysis significantly. Dioctyl phthalate-based carbon paste electrode exhibits extremely wide cathodic potential window. It is explored as a powerful substrate electrode to solve the problem of hydrogen evolution and further improve reproducibility for stripping analysis using bismuth-coated electrodes for the first time. It was successfully applied to the simultaneous determination of Zn²⁺, Cd²⁺, and Pb²⁺. Linear responses are obtained for Zn²⁺ in the range of 10–100 μg L⁻¹ and for Pb²⁺ and Cd²⁺ in the range of 5–100 μg L⁻¹. The detection limits for Zn²⁺, Cd²⁺, and Pb²⁺ are 0.1 μg L⁻¹, 0.22 μg L⁻¹ and 0.44 μg L⁻¹, respectively. The method has been successfully applied to the determination of Zn²⁺, Cd²⁺, and Pb²⁺ in waste water samples. The detection strategy based on the combination of dioctyl phthalate-based carbon paste electrode and bismuth-coated electrodes holds great promise for stripping analysis.