High-performance liquid chromatography and thin-layer chromatography for the simultaneous quantitation of rabeprazole and mosapride in pharmaceutical products

Simple, sensitive high-performance liquid chromatography (HPLC) and thin-layer chromatography (TLC) methods are developed for the quantitative estimation of rabeprazole and mosapride in their combined pharmaceutical dosage forms. In HPLC, rabeprazole and mosapride are chromatographed using 0.01M 6.5 pH ammonium acetate buffer-methanol-acetonitrile (40:20:40, v/v, pH 5.70+/-0.02) as the mobile phase at a flow rate of 1.0 mL/min. In TLC, the mobile phase is ethyl acetate-methanol-benzene (2:0.5:2.5, v/v). Both the drugs are scanned at 276 nm. The retention times of rabeprazole and mosapride are found to be 4.93+/-0.01 and 9.79+/-0.02, respectively. The Rf values of rabeprazole and mosapride are found to be 0.42+/-0.02 and 0.61+/-0.02, respectively. The linearities of rabeprazole and mosapride are in the range of 400-2000 ng/mL and 300-1500 ng/mL, respectively, for HPLC; in TLC, the linearities of rabeprazole and mosapride are in the range of 400-1200 ng/spot and 300-900 ng/spot, respectively. The limit of detection is found to be 97.7 ng/mL for rabeprazole and 97.6 ng/mL for mosapride in HPLC; in TLC the limit of detection is found to be 132.29 ng/spot for rabeprazole and 98.25 ng/spot for mosapride. The proposed methods can be applied to the determination of rabeprazole and mosapride in combined pharmaceutical products.     

Stability indicating reversed-phase high-performance liquid chromatographic and thin layer densitometric methods for the determination of ziprasidone in bulk powder and in pharmaceutical formulations

Two sensitive and reproducible methods were developed and validated for the determination of ziprasidone (ZIP) in the presence of its degradation products in pure form and in pharmaceutical formulations. The fi rst method was based on reversed-phase high-performance liquid chromatography (HPLC), on a Lichrosorb RP C(18) column using water:acetonitrile:phosphoric acid (76:24:0.5 v/v/v) as the mobile phase at a fl ow rate of 1.5 mL min(-1) at ambient temperature. Quantification was achieved with UV detection at 229 nm over a concentration range of 10-500 micro g mL(-1) with mean percentage recovery of 99.71 +/- 0.55. The method retained its accuracy in presence of up to 90% of ZIP degradation products. The second method was based on TLC separation of ZIP from its degradation products followed by densitometric measurement of the intact drug spot at 247 nm. The separation was carried out on aluminium sheet of silica gel 60 F(254) using choloroform:methanol:glacial acetic acid (75:5:4.5 v/v/v) as the mobile phase, over a concentration range of 1-10 micro g per spot and mean percentage recovery of 99.26 +/- 0.39. Both methods were applied successfully to laboratory prepared mixtures and pharmaceutical capsules.     

Validated HPTLC method for simultaneous estimation of levofloxacin hemihydrate and ornidazole in pharmaceutical dosage form

A simple, rapid, and accurate high-performance thin-layer chromatography (HPTLC) method is described for the simultaneous determination of levofloxacin hemihydrate and ornidazole in tablet dosage form. The method is based on the HPTLC separation of the two drugs followed by densitometric measurements of their spots at 298 nm. The separation is carried out on Merck TLC aluminium sheets of silica gel 60 F254 using n-butanol-methanol-ammonia (5:1:1.5, v/v/v) as mobile phase. The linearity is found to be in the range of 50-250 and 100-500 ng/spot for levofloxacin hemihydrate and ornidazole, respectively. The method is successively applied to pharmaceutical formulation because no chromatographic interferences from the tablet excipients are found. The suitability of this HPTLC method for the quantitative determination of the compounds is proved by validation in accordance with the requirements laid down by International Conference on Harmonization (ICH) guidelines.     

Determination of gatifloxacin and ornidazole in tablet dosage forms by high-performance thin-layer chromatography.

A simple and sensitive high-performance thin-layer chromatography (HPTLC) method has been developed for the quantitative estimation of gatifloxacin and ornidazole in its combined dosage forms. Gatifloxacin and ornidazole were chromatographed on silica Gel 60 F(254) TLC plate using n-butanol:methanol:ammonia (6 M) (8:1:1.5 v/v) as the mobile phase and scanned at 302 nm using a Camag TLC Scanner 3. The R(f) value of gatifloxacin and ornidazole was found to be 0.21 +/- 0.02 and 0.76 +/- 0.04, respectively. The linearity of gatifloxacin and ornidazole were in the range of 100 - 500 ng/spot and 250 - 1250 ng/spot, respectively. The limit of detection was found to be 40 ng/spot for gatifloxacin and 100 ng/spot for ornidazole. The proposed method was applied for the determination of gatifloxacin and ornidazole in combined dosage forms.     

Stress degradation studies and development of stability-indicating TLC-densitometry method for determination of prednisolone acetate and chloramphenicol in their individual and combined pharmaceutical formulations

ABSTRACT: A rapid and reproducible stability indicating TLC method was developed for the determination of prednisolone acetate and chloramphenicol in presence of their degraded products. Uniform degradation conditions were maintained by refluxing sixteen reaction mixtures for two hours at 80°C using parallel synthesizer including acidic, alkaline and neutral hydrolysis, oxidation and wet heating degradation. Oxidation at room temperature, photochemical and dry heating degradation studies were also carried out. Separation was done on TLC glass plates, pre-coated with silica gel 60F-254 using chloroform: methanol (14:1 v/v). Spots at Rf 0.21 ± 0.02 and Rf 0.41 ± 0.03 were recognized as chloramphenicol and prednisolone acetate, respectively. Quantitative analysis was done through densitometric measurements at multiwavelength (243 nm, λmax of prednisolone acetate and 278 nm, λmax of chloramphenicol), simultaneously. The developed method was optimized and validated as per ICH guidelines. Method was found linear over the concentration range of 200-6000 ng/spot with the correlation coefficient (r2 ± S.D.) of 0.9976 ± 3.5 and 0.9920 ± 2.5 for prednisolone acetate and chloramphenicol, respectively. The developed TLC method can be applied for routine analysis of prednisolone acetate and chloramphenicol in presence of their degraded products in their individual and combined pharmaceutical formulations.     

Development and validation of a TLC-densitometric method for the simultaneous quantitation of strychnine and brucine from Strychnos spp. and its formulations

A simple, sensitive, and specific thin-layer chromatography densitometric method has been developed for the simultaneous quantitation of strychnine and brucine. These two marker compounds are quantitated in the seeds of Strychnos nux-vomica, Strychnos ignatii, and its formulations. The method involves densitometric evaluation of strychnine and brucine after resolving it by high-performance TLC on silica gel plate with toluene-ethyl acetate-diethyl amine-methanol (7:2:1:0.3 v/v) as the mobile phase. The method is validated for precision (interday and intraday), repeatability, and accuracy. The relationship between the concentration of standard solutions and the peak response is linear within the concentration range of 160 to 480 ng/spot for strychnine and 80 to 480 ng/spot for brucine. Instrumental precision is found to be 0.54 and 0.78 (% CV), and repeatability of the method is 1.01 and 1.06 (% CV) for strychnine and brucine, respectively. Accuracy of the method is checked by recovery study conducted at three different levels and the average percentage recovery is found to be 99.13% for strychnine and 100.16% for brucine. The proposed HPTLC method for the simultaneous quantitation of strychnine and brucine is found to be simple, precise, specific, sensitive, and accurate, and it can be used for routine quality control of raw material of Strychnos spp. It also can be applied in quantitating any of these marker compounds in other formulations.     

Simultaneous high-performance thin-layer chromatography densitometric assay of trandolapril and verapamil in the combination preparation

A high-performance thin-layer chromatography (TLC) method coupled with densitometric analysis has been developed for simultaneous measurement of trandolapril (TRA) and verapamil (VER) in 2-component mixtures and in their combination capsules. The active substances were extracted from capsules with methanol (mean recovery: 103.4% for TRA, 97.13% for VER) and chromatographed on TLC plates coated with silica gel 60 F254 in horizontal chambers with ethyl acetatc-ethanol-acetic acid (8 + 2 + 0.5, v/v) mobile phase. Chromatographic separation of these components was followed by ultraviolet densitometric quantification at 215 nm. The calibration graphs were constructed over the concentration range from 0.5 to 1.5 microg/microL (corresponding to 5.0-15.0 microg/spot) for both drugs with good correlation (r > or = 0.990). Detection and quantitation limits were found to be 1.25 and 3.75 microg/spot for TRA and 0.15 and 0.45 microg/spot for VER, respectively. The proposed method was used for determination of both drugs in TRA-VER capsules with satisfactory precision [0.97% < relative standard deviation (RSD) < 4.50% for TRA, 0.49% < RSD < 3.10% for VER] and accuracy [2.16% < relative error (RE) < 4.90% for TRA, 1.73% < RE < 5.68% for VER].     

Simultaneous assay of olanzapine and fluoxetine in tablets by column high-performance liquid chromatography and high-performance thin-layer chromatography

This paper describes validated high-performance liquid chromatographic (LC) and high-performance thin-layer chromatographic (TLC) methods for the simultaneous estimation of olanzapine and fluoxetine in pure powder and tablet formulations. The LC separation was achieved on a Lichrospher 100 RP-180, C18 column (250 mm, 4.0 mm id, 5 microm) using 0.05 M potassium dihydrogen phosphate buffer (pH 5.6 adjusted with o-phosphoric acid)-acetonitrile (50 + 50, v/v) as the mobile phase at a flow rate of 1 mL/min and ambient temperature. The TLC separation was achieved on aluminum sheets coated with silica gel 60F254 using methanol-toluene (40 + 20, v/v) as the mobile phase. Quantitation was achieved by measuring ultraviolet absorption at 233 nm over the concentration range of 10-70 and 40-280 microg/mL with mean recovery of 99.54 +/- 0.89 and 99.73 +/- 0.58% for olanzapine and fluoxetine, respectively, by the LC method. Quantitation was achieved by measuring ultraviolet absorption at 233 nm over the concentration range of 100-800 and 400-3200 ng/spot with mean recovery of 101.53 +/- 0.06 and 101.45 +/- 0.35% for olanzapine and fluoxetine, respectively, by the TLC method with densitometry. These methods are simple, precise, and sensitive, and they are applicable for simultaneous determination of olanzapine and fluoxetine in tablet formulations.     

Spectrophotometric and spectrodensitometric determination of paracetamol and drotaverine HCl in combination

Thin-layer chromatography, first derivative, ratio spectra derivative spectrophotometry and Vierordt's method have been developed for the simultaneous determination of paracetamol and drotaverine HCl. TLC densitometric method depends on the difference in Rf values using ethyl acetate:methanol:ammonia (100:1:5 v/v/v) as a mobile phase. The spots of the two drugs were scanned at 249 and 308 nm over concentration ranges of 60-1200 microg/ml and 20-400 microg/ml with mean percentage recovery 100.11%+/-1.91 and 100.15%+/-1.87, respectively. The first derivative spectrophotometric method deals with the measurements at zero-crossing points 259 and 325 nm with mean percentage recovery 99.25%+/-1.08 and 99.45%+/-1.14, respectively. The ratio spectra first derivative technique was used at 246 and 305 nm with mean percentage recovery 99.75%+/-1.93 and 99.08%+/-1.22, respectively. Beer's law for first derivative and ratio spectra derivative methods was obeyed in the concentration range 0.8-12.8 and 0.4-6.4 microg/ml of paracetamol and drotaverine HCl, respectively. Vierordt's method was applied to over come the overlapping of paracetamol and drotaverine HCl in zero-order spectra in concentration range 2-26 and 2-40 microg/ml respectively. The suggested methods were successfully applied for the analysis of the two drugs in laboratory prepared mixtures and their pharmaceutical formulation. The validity of the methods was assessed by applying the standard addition technique. The obtained results were statistically agreed with those obtained by the reported method.     

Determination of Sumatriptan and Zolmitriptan in Presence of Their Corresponding Degradation Products by HPTLC Methods

Accurate, sensitive, and precise high performance thin layer chromatographic (HPTLC) methods were developed and validated for the determination of sumatriptan and zolmitriptan in presence of their degradation products. Sumatriptan was separated from its degradation products and analyzed on TLC silica gel 60 F₂₅₄ plates using chloroform–ethyl acetate–methanol–ammonia (4:3:3:0.1, v/v) as a developing system followed by densitometric measurement of the bands at 228 nm. Zolmitriptan was determined using chloroform–ethyl acetate–methanol–ammonia (3:3:3:1, v/v) as a developing system followed by densitometric measurement at 222 nm. The methods were validated over a range of 0.5–4 μg/spot for sumatriptan and 0.5–3 μg/spot for zolmitriptan. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in their pharmaceutical formulations.     

Development and validation of a stability-indicating method for determination of free sterols in the Asian medicinal leech Hirudo manillensis

A rapid, simple, sensitive, selective, precise and robust thin-layer chromatography densitometric method for the determination of free sterols in leech was developed and validated on silica gel layer using carbon tetrachloride-methanol-formic acid (9.5:1.5:0.55, v/v/v). Spectrodensitometric scanning was carried using a Camag TLC scanner III at 366 nm after spraying 2% methanolic sulphuric acid, which gave compact spots for cholesterol (R(F) = 0.35 ± 0.02). The regression analysis data for calibration plot implied a good linear relationship (r(2) = 0.99958) between response and concentration over the range 100-600 ng per spot with respect to peak area. The limits of detection and quantification were found to be 13.8 ± 0.51 and 45.01 ± 1.29 ng per spot, respectively. Validation was in accordance to the International Conference on Harmonization guidelines. Cholesterol was subjected to forced stress conditions of oxidation, hydrolysis and heat. Degradation products resulting from the forced stress did not interfere with detection because the degradant peaks were well separated from the cholesterol peak. The densitometric method can be regarded as stability-indicating and can be used for quality control assay of cholesterol in leech extract.     

A comparative study on various spectrometries with thin layer chromatography for simultaneous analysis of drotaverine and nifuroxazide in capsules

Three spectrophotometric methods including Vierordt's method, derivative, ratio spectra derivative, and thin layer chromatography (TLC)-UV densitometric method were developed for simultaneous determination of drotaverine HCl (DRT) and nifuroxazide (NIF) in presence of its impurity, 4-hydroxybenzohydrazide (4-HBH). In Vierordt's method, (E(1 cm)(1%)) values were calculated at 227 and 368 nm in the zero-order spectra of DRT and NIF. By derivative spectrophotometry, the zero-crossing method, drotaverine HCl was determined using the second derivative at 245 nm and the third derivative at 238 nm, while nifuroxazide was determined using the first derivative at 399 nm and the second derivative at 411 nm. The ratio spectra derivative spectrophotometry is basedon the measure of the amplitude at 459 nm for DRT and at 416 nm for NIF in the first derivative of the ratio spectra. Calibration graphs of the three spectrophotometric methods were plotted in the range 1-10 mug/ml of DRT and 2-20 mug/ml of NIF. TLC-UV densitometric method was achieved on silica gel plates using ethyl acetate : methanol : ammonia 33% (10 : 1 : 0.1 v/v/v) as the mobile phase. The Rf values were 0.74, 0.50, 0.30+/-0.01 for DRT, NIF and 4-HBH, respectively. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometrical area were measured at 308 and 287 nm with linear range 0.2-4 mug/spot and 0.6-12 mug/spot for DRT and NIF, respectively. The proposed methods have been successfully applied to the commercial pharmaceutical formulation without any interference of excipients. Mean recoveries, relative standard deviations and the results of the proposed methods were compared with those obtained by applying the alternate methods.     

New methods for determination of cinnarizine in mixture with piracetam by spectrodensitometry, spectrophotometry, and liquid chromatography

Four new methods were developed and validated for the determination of cinnarizine HCl in its binary mixture with piracetam in pure and pharmaceutical preparations. The first one was a densitometric analysis that provides a simple and rapid method for the separation and quantification of cinnarizine HCI. The method depends on the quantitative densitometric evaluation of thin-layer chromatograms of cinnarizine HCI at 252 nm over concentration range of 1-6 microg/spot, with a mean accuracy of 100.05 +/- 0.91%. The second method was determination of the drug using a colorimetric method that utilizes the reaction of 3-methyl-benzothiazolin-2-one in the presence of FeCl3 as an oxidant. The green color of the resulting product was measured at 630 nm over concentration range 10-40 microg/mL, with a mean accuracy of 100.10 +/- 1.13%. The third method was a direct spectrophotometric determination of cinnarizine HCI at 252 nm over the concentration range 7-20 microg/mL, while piracetam was determined by derivative ratio spectrophotometry at 221.6 nm over concentration range 5-30 microg/mL, with a mean accuracy of 100.14 +/- 0.79 and 100.26 +/- 1.24% for cinnarizine HCI and piracetam, respectively. The last method was a liquid chromatography analysis of both cinnarizine HCI and piracetam, depending on quantitative evaluation of chromatograms of cinnarizine HCI and piracetam at 252 and 212 nm, respectively, over the concentration range 10-200 microg/mL for cinnarizine HCI and 20-500 microg/mL for piracetam, with a mean accuracy of 100.03 +/- 0.89 and 100.40 +/- 0.94% for cinnarizine HCI and piracetam, respectively. The proposed procedures were checked using laboratory-prepared mixtures and successfully applied for the analysis of their pharmaceutical preparations. The validity of the proposed procedures was further assessed by applying the standard addition technique. Recoveries were quantitative, and the results obtained agreed with those obtained by other reported methods.     

Estimation of trans-resveratrol in herbal extracts and dosage forms by high-performance thin-layer chromatography

A simple, sensitive and precise high-performance thin-layer chromatographic (HPTLC) method of analysis of trans-resveratrol in Polygonum cuspidatum root extracts and in dosage forms was developed and validated. The separation was carried out on a TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase, eluted with chloroform-ethylacetate-formic acid (2.5 : 1 : 0.1) as mobile phase. Densitometric analysis of trans-resveratrol was carried out in the absorbance mode at 313 nm. This system was found to give compact spot for trans-resveratrol (Rf value of 0.40+/-0.03). A good linear regression relationship between peak areas and the concentrations was obtained over the range of 0.5-3.0 microg/spot with correlation coefficient 0.9989. The limit of detection and quantification was found to be 9 and 27 ng/spot. The method was validated for precision and recovery. The spike recoveries were within 99.85 to 100.70%. The RSD values of the precision in the range 0.37-1.84%. The proposed developed HPTLC method can be applied for identification and quantitative determination of trans-resveratrol in herbal extracts and dosage forms.     

Determination of cortisol in human plasma by thin-layer chromatography and fluorescence derivatization with isonicotinic acid hydrazide

The present work describes a specific and rapid determination of cortisol in human plasma. The method includes liquid-liquid extraction of plasma samples, thin-layer chromatography (TLC) of ethanolic extracts on aluminium foil-backed silica gel 60 TLC plates, derivatization of cortisol with isonicotinic acid hydrazide, and densitometric measurement of the fluorescence intensity of cortisol hydrazone. The fluorescence was linearly related to cortisol amounts; the correlation coefficients of standard curve plots were r>0.99. The coefficient of variation ranged between 2.8-7.9% (20 ng, within-assay/between assay variation) and 1.6-6.8% (80 ng, within-assay/between assay variation). The recovery of cortisol from plasma spiked with 21-deoxycortisol was 85%+/-4%. Cortisol concentration in the plasma was 66+/-32 ng/mL (mean+/-standard deviation, n=24). The advantage of this method is its simplicity to separate cortisol from other steroids by TLC, its specificity (formation of cortisol hydrazone), and the rapid quantitation of cortisol by densitometry.     

Reversed-Phase High Performance Liquid Chromatographic and Thin Layer Chromatographic Methods for the Simultaneous Determination of Benazepril Hydrochloride and Hydrochlorothiazide in Cibadrex Tablets

ABSTRACT

Two procedures were developed for simultaneous determination of benazepril hydrochloride (I) and hydrochlorothiazide (II) in pure, laboratory made mixtures and in pharmaceutical dosage form “Cibadrex tablets® using reversed phase high performance liquid chromatographic and thin layer chromatographic methods.

For reversed phase HPLC, a new very sensitive, rapid, selective method was developed. The linearity ranges were 32-448 ng/20 μl and 40-560 ng/20 μl for benazepril hydrochloride and hydrochlorothiazide, respectively. The corresponding recoveries were 99.38 ± 1.526 and 99.2 ± 1.123.

The minimum detection limits were 7 ng/20 μl and 14 ng/20 μl for benazepril hydrochloride and hydrochlorothiazide respectively.

On the other hand, a new, simple, sensitive and fast thin layer chromatographic scanning densitometric method was developed for simultaneous determination of benazepril hydrochloride and hydrochlorothiazide using ethyl acetate: methanol: ammonia (85: 20: 10 v/v) as the developing system. The R_f values were 0.33 & 0.68 for benazepril hydrochloride and hydrochlorothiazide respectively. The minimum detection limit obtained was 0.12 μg/spot for benazepril hydrochloride and 0.24 μg/spot for hydrochlorothiazide. The mean percentage recoveries were 100.04 ± 1.102 and 99.31 ± 1.009 for benazepril hydrochloride and hydrochlorothiazide respectively.

The two proposed methods were simple, precise, sensitive and could be successfully applied for the determination of pure, laboratory made mixtures and pharmaceutical dosage forms. The results obtained were compared with those obtained by A ^1%.     

Rapid Validated Thin-Layer Chromatography—Densitometry for the Simultaneous Determination of Three Co-formulated Drugs Used for Common Cold Treatment

JPC – Journal of Planar Chromatography – Modern TLC - A rapid validated thin-layer chromatography (TLC)—densitometric method has been developed for the simultaneous determination...     

HPLC, TLC, and first-derivative spectrophotometry stability-indicating methods for the determination of tropisetron in the presence of its acid degradates

Three stability-indicating assay methods were developed for the determination of tropisetron in a pharmaceutical dosage form in the presence of its degradation products. The proposed techniques are HPLC, TLC, and first-derivative spectrophotometry (1D). Acid degradation was carried out, and the degradation products were separated by TLC and identified by IR, NMR, and MS techniques. The HPLC method was based on determination of tropisetron in the presence of its acid-induced degradation product on an RP Nucleosil C18 column using methanol-water-acetonitrile-trimethylamine (65 + 20 + 15 + 0.2, v/v/v/v) mobile phase and UV detection at 285 nm. The TLC method was based on the separation of tropisetron and its acid-induced degradation products, followed by densitometric measurement of the intact spot at 285 nm. The separation was carried out on silica gel 60 F254 aluminum sheets using methanol-glacial acetic acid (22 + 3, v/v) mobile phase. The 1D method was based on the measurement of first-derivative amplitudes of tropisetron in H2O at the zero-crossing point of its acid-induced degradation product at 271.9 nm. Linearity, accuracy, and precision were found to be acceptable over concentration ranges of 40-240 microg/mL, 1-10 microg/spot, and 6-36 micro/mL for the HPLC, TLC, and 1D methods, respectively. The suggested methods were successfully applied for the determination of the drug in bulk powder, laboratory-prepared mixtures, and a commercial sample.     

Determination of cimetidine,famotidine, and ranitidine hydrochloride in the presence of their sulfoxide derivatives in pure and dosage forms by high-performance thin-layer chromatography and scanning densitometry

A selective, precise, and accurate method was developed for the determination of cimetidine (C), famotidine (F), and ranitidine hydrochloride (R x HCl) in the presence of their sulfoxide derivatives. The method involves quantitative densitometric evaluation of mixtures of the drugs and their derivatives after separation by high-performance thin-layer chromatography on silica gel plates (10 x 20 cm) with ethyl acetate-isopropanol-20% ammonia (9 + 5 + 4, v/v) as the mobile phase for both C and F and ethyl acetate-methanol-20% ammonia (10 + 2 + 2, v/v) as the mobile phase for R x HCl; Rf values for C, F, and R x HCl and their corresponding derivatives were 0.85 and 0.59, 0.73 and 0.41, and 0.56 and 0.33, respectively. Developing time was approximately 20 min. For densitometric evaluation, peak areas were recorded at 218, 265, and 313 nm for C, F, and R x HCl, respectively. The relationship between concentration and the corresponding peak area was plotted for the ranges of 5-50 microg/spot for C and 2-20 microg/spot for F and R x HCl. Mean recoveries were 100.39 +/- 1.33, 99.77 +/- 1.30, and 100.09 +/- 0.69% for C, F, and R x HCl, respectively. The proposed method was used successfully for stability testing of the pure drugs in the presence of up to 90% of their degradates, in bulk powder and dosage forms. The results obtained were analyzed statistically and compared with those obtained by the official methods.     

Development and validation of spectrophotometric, TLC and HPLC methods for the determination of lamotrigine in presence of its impurity

Three reliable, rapid and selective methods have been developed and validated for the determination of lamotrigine in the presence of its impurity, 2,3-dichlorobenzoic acid. The first method is spectrophotometric method using p-chloranilic acid forming a colored product with lambda(max) 519+/-2 nm. All variables affecting the reaction have been investigated and the conditions were optimized. Beer's law was obeyed over a concentration range of 10-200 microg ml(-1) with mean accuracy 100.13+/-0.44%. The molar ratio of the formed ion-association complex is found to be 1 : 1 as deduced by Job's method. The conditional stability constant (K(f)), standard free energy (DeltaG), molar absorptivity(epsilon), and sensitivity index were evaluated. The second method is based on TLC separation of the cited drug (Rf=0.75+/-0.01) from its impurity (Rf=0.23+/-0.01) followed by densitometric measurement of the intact drug spots at 275 nm. The separation was carried on silica gel plates using ethyl acetate : methanol : ammonia 35% (17 : 2 : 1 v/v/v) as a mobile phase. The linearity range was 0.5-10 microg/spot with mean accuracy 99.99+/-1.33%. The third method is accurate and sensitive stability-indicating HPLC method based on separation of lamotrigine from its impurity on a reversed phase C(18) column, using a mobile phase of acetonitrile : methanol : 0.01 M potassium orthophosphate (pH 6.7+/-0.1) (30 : 20 : 50 v/v/v) at ambient temperature 25+/-5 degrees C and UV detection at 275 nm in an overall analysis time of about 6 min., based on peak area. The injection repeatability, intraday and interday repeatability were calculated. The procedure provided a linear response over the concentration range 1-12 microg ml(-1) with mean accuracy of 99.50+/-1.30%. The proposed methods were successfully applied for the determination of lamotrigine in bulk powder, in dosage form and in presence of its impurity. The results obtained were analyzed by ANOVA to assess that no significant difference between each of the three methods and the reported one. The validation was performed according to USP guidelines.