The Synthesis, Polymerization and Second Order Non-Linear Optical Properties of Novel, Conjugated, Unsymmetrical Diacetylenes Showing Liquid Crystal Behaviour

A number of novel, conjugated, unsymmetrically disubstituted diphenyl-diacetylenes have been synthesized and polymerized in the liquid-crystalline phase to yield liquid-crystalline polymers. The efficiency of second harmonic generation is reported for both monomers and polymers.     

Design,synthesis, and characterization of a combined main-chain/side-chain liquid-crystalline polymer based on ethyl cellulose

A novel combined main-chain/side-chain liquid-crystalline polymer based on an ethyl cellulose main chain containing azobenzene mesogens (AzoEC) was successfully synthesized. Molecular characterization of the resulting polymers with different degrees of substitution (DS) was performed with proton nuclear magnetic resonance (¹H NMR), Fourier-transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Thermal stability was investigated by thermogravimetric analysis (TGA). The phase transitions and liquid-crystalline behavior of these polymers were investigated by differential-scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (WAXD). The results indicate that DS has substantial effect on the liquid-crystalline behavior of these polymers. AzoEC with low DS only shows the cholesteric phase similar to ethyl cellulose (EC). However, when DS increases to a specific value, AzoEC begins to show fascinating supramolecular structures. The supramolecular structure of AzoEC with maximum DS consisted of a large-scale ordered lamellar structure formed by EC main chains and a small-scale ordered structure formed by azobenzene mesogens.     

Curing kinetics of liquid-crystalline epoxy resins

By endcapping mesogenic rigid rod molecules with reactive epoxy groups a novel class of liquid-crystalline thermoset has been obtained. In fact is has been shown that the nematic molecular arrangement is sustained over the crosslinking reaction of liquid-crystalline epoxy resins when the curing reaction is carried out in the thermal stability range of the liquid-crystalline phase. Calorimetric analysis was used in characterizing the isothermal cure. An unsophisticated model is proposed for evaluating the activation energies of the crosslinking reaction. For liquid-crystalline epoxy resins lower activation energies result with respect to the cure reactions for non liquid-crystalline epoxy resins.     

Hybrid thermotropic liquid-crystalline block copolymers

A new approach to the preparation of two classes of block copolymers containing liquid-crystalline segments is reported. Copolymers 1 and 2 are constituted by polytetrahydrofuran and side-chain liquid-crystalline polymethacrylate blocks, whereas block copolymers 3 consist of polystyrene and main-chain liquid-crystalline polyester blocks. The synthetic procedures leading to copolymers 1-3 are extremely versatile and can be used to prepare a great variety of block copolymer architectures. In both copolymer classes the chemically different blocks are strongly segregated in the solid and melt phases and undergo individual phase transitions. The mesophase transition temperatures of the liquid-crystalline blocks are very similar to those of the corresponding homopolymers, and their enthalpies are directly proportional to the content of the liquid-crystalline block.     

Formation of fibril structures in polymerizable, rod-coil-oligomer-modified epoxy networks

This paper describes the in situ preparation of fibrils in epoxy networks in which the fibril-like structures are cured polymerizable rod-coil oligomers. The epoxy-terminated alpha,omega-modified PEO oligomers, which are ABA rod-coil-rod oligomers with a poly(ethylene oxide) coil unit and two aromatic azomethine liquid-crystalline rod units, were synthesized and then further blended with an epoxy precursor. Uniform nanoscale columnar structures were observed in the neat rod-coil oligomers as well as in the crosslinked liquid-crystalline state. During the curing of the blends, the supramolecular nanoscale columnar structures of the rod-coil oligomers are transformed into polymeric fibrils where the epoxy functional end groups have co-reacted with epoxy precursors to form a crosslinked network.     

Synthesis, characterization, and the photochromic, luminescence, metallogelation and liquid-crystalline properties of multifunctional platinum(II) bipyridine complexes

A series of multifunctional platinum(II) bipyridine complexes were designed, synthesized, and characterized by (1)H NMR, fast atom bombardment mass spectrometry (FAB-MS), and elemental analysis. Their electrochemical and photophysical properties were investigated. The photochromic properties of the spironaphthoxazine-containing complexes were also studied. Some of these complexes were shown to be capable of forming stable thermoreversible metallogels in organic solvents. In contrast to typical thermotropic organogels and metallogels, one of the complexes could form metallogels in dodecane and is very stable towards external stimuli. The photochromic activation parameters for the bleaching reaction of a representative spironaphthoxazine-containing complex in a dodecane gel were determined through kinetic studies at various temperatures. Lamellar liquid-crystalline behavior was also observed in one of the complexes, and the liquid-crystalline properties were studied by thermogravimetry analysis (TGA), polarized optical microscopy (POM), differential scanning calorimetry (DSC), variable-temperature X-ray diffraction (XRD), and variable-temperature infrared (IR) spectroscopy.     

Solid-State polymerization of the binary mixture of methacrylate and liquid-crystalline compound by electron beam

Solid-state polymerization of a binary mixture of nonliquid-crystalline monomer and liquidcrystalline compound was carried out using electron beam. The monomers were benzoic acid containing 4-[ω-(meth)acryloyloxyalkyloxy] benzoic acids, in which the alkylene spacer was ethylene, hexamethylene, or undecamethylene. The conversion yield of monomer to polymer to a large extent increased with increasing content of a liquid-crystalline compound with a terminal carboxylic group, such as 4-n-alkyloxybenzoic acid, while the addition of a liquid-crystalline compound without terminal carboxylic group did not affect polymerization of the monomer. Phase diagrams of the mixture of monomer and liquid-crystalline compound were examined using cross-polarizing microscopy and differential scanning calorimetry (DSC). All mixtures of monomer and 4-n-alkyloxybenzoic acid or liquid-crystalline compound without terminal carboxylic group showed liquid-crystallinity in a broad composition range. It was concluded that liquid-crystalline compounds with terminal carboxylic acid may form hydrogen bondings with methacrylate or acrylate monomer having terminal carboxylic acid which enhance polymerizability of the mixture. The stereoregularity of polymers determined by NMR depended on increasing irradiation dose and temperature rather than the content of the added liquid-crystalline 4-n-decanoxybenzoic acid.     

A mixed fullerene-ferrocene thermotropic liquid crystal: synthesis, liquid-crystalline properties, supramolecular organization and photoinduced electron transfer

Grafting of a ferrocene-containing liquid-crystalline malonate derivative to C60 led to the mixed fullerene-ferrocene material 1 which gave rise to a smectic A phase. Cholesterol was used as liquid-crystalline promoter. X-ray diffraction experiments and volumetric measurements indicated that 1 is organized in double layered structures. The corresponding supramolecular organization within the mesomorphic lamellar phase is characterized by a microsegregation of the different units (ferrocene, fullerene, and cholesterol) in distinct sublayers. In such a smectic A phase, C60 imposes the arrangement of the other molecular moieties. Photophysical studies revealed that electron transfer occurs from the donor ferrocene to the electron accepting fullerene. The formation of a long-lived radical pair, with lifetimes of the order of several hundred nanoseconds, was confirmed by time-resolved spectrometry, especially in the near infrared region, in which the radical anion of the fullerene moiety displays its characteristic fingerprint absorption.     

Liquid-Crystalline Polymer Particles Prepared by Classical Polymerization Techniques

Liquid-crystalline polymer particles prepared by classical polymerization techniques are receiving increased attention as promising candidates for use in a variety of applications including micro-actuators, structurally colored objects, and absorbents. These particles have anisotropic molecular order and liquid-crystalline phases that distinguish them from conventional polymer particles. In this minireview, the preparation of liquid-crystalline polymer particles from classical suspension, (mini-)emulsion, dispersion, and precipitation polymerization reactions are discussed. The particle sizes, molecular orientations, and liquid-crystalline phases produced by each technique are summarized and compared. We conclude with a discussion of the challenges and prospects of the preparation of liquid-crystalline polymer particles by classical polymerization techniques.     

Phase equilibria in polymer/solvent systems, 8. Swelling of chemically crosslinked polymers in mesogenic substances in different states

Swelling curves of chain end-linked polyurethane networks in mesogenic swelling agents were determined gravimetrically. Different slopes of the swelling curves are observed above and below the transition temperature of the liquid-crystalline to the isotropic state. From the sign of the slope it can be derived that the swelling agent is not in the liquid-like state in the gel if the pure swelling agent is liquid-crystalline.     

Supramolecular liquid-crystalline materials: molecular self-assembly and self-organization through intermolecular hydrogen bonding

Supramolecular liquid-crystals are molecular complexes formed from different and independent molecular species through specific molecular interactions such as hydrogen bonding. We have recently developed new types of H-bonded liquid-crystalline materials obtained by molecular self-assembly processes: (1) doubly H-bonded liquid-crystalline complexes through a molecular recognition process between 2,6-bis(acylamino)pyridines and benzoic acids, (2) liquid-crystalline polymer blends involving an H-bonding interaction between poly(4-vinylphenol) and a thermotropic main-chain polyester containing a lateral pyridyl substituent, (3) liquid-crystalline networks built through hydrogen bonds between multifunctional H-bonding components. These new materials may bridge a gap between liquid crystals and supramolecular systems.     

Discotic charge transfer twins Structure and mesophase behaviour of covalently linked triphenylenes and trinitrofluorenones

Discotic charge transfer twins, a novel class of discotic liquid-crystalline compounds were studied. These compounds consist of triphenylene units (as donors) which are chemically linked via flexible spacers of various lengths to trinitrofluorenone units (acting as acceptor). They display a liquid-crystalline phase over a wide temperature range extending up to 240-260°C. Based on X-ray analysis a structural model is proposed for the liquid-crystalline phase: the molecules are arranged in columns in such a way that mixed stacks occur, the intercolumnar packing possesses an orthorhombic symmetry. The neighbouring columns are connected along specific directions via flexible spacers which give rise to highly anisotropic structural properties of this columnar liquid-crystalline phase.     

X-ray investigation of combined main-chain/side-chain liquid-crystalline polymers

Structural investigations on six combined liquid-crystalline polymers using the X-ray technique are described. The measurements have allowed a characterization of the liquid-crystalline phases and have led to our first ideas about the phase structures. All mesogenic groups are arranged parallel to each other, the shortest segment in the main-chain or in the side-chain determines the smectic layer spacing. A modified designation for liquid-crystalline phases of high polymers is proposed.     

Invite Article: The Liquid-Crystalline Phases of Double-Stranded Nucleic Acids in Vitro and in Vivo

This article describes the state of and progress in experimental studies of liquid crystals of naturally occurring nucleic acids and synthetic polynucleotides. The areas considered in this review include: (i) the liquid-crystalline phase of nucleic acids in aqueous salt solutions, (ii) the liquid-crystalline phase of nucleic acids in aqueous polymer solutions, (iii) the liquid-crystalline phase of nucleic acids in living systems. Some unsolved problems which are of interest from both a physicochemical and a biological point of view are discussed.     

Induction of smectic mesomorphism by mixing a non-liquid-crystalline methacrylate with a nematic liquid-crystalline compound having a cyano-containing mesogen

The structure and phase diagram of a binary mixture of a non-liquid-crystalline, mono-functional (meth)acrylate monomer and a liquid-crystalline compound having a cyano group-containing mesogen were examined. The monomers had mesogenic units such as biphenylene and phenyl benzoate, but did not show liquid-crystallinity. The liquid-crystalline compounds possessed a cyanobiphenyl or a cyanophenyl benzoate mesogenic unit. The liquid-crystalline 4-cyanophenyl 4'-n-octyloxybenzoate did not show a smectic A phase, while the binary mixture of the 4-butoxy-4'-(ω-methacryloyloxyhexyloxy)biphenyl monomer with 4-cyanophenyl 4'-n-octyloxybenzoate showed the induction of a smectic A phase in a nearly equimolar composition range. However, the binary mixture of the monomer, containing a phenyl benzoate group, and the liquid-crystalline compound did not induce a smectic phase.     

Modulation of the absorption, fluorescence, and liquid-crystal properties of functionalised diarylethene derivatives

Systematic variation of the molecular symmetry in a photochromic system based on a 1,2-bis(2-methylbenzo[b]thiophen-3-yl)hexafluorocyclopentene group, connected by decyl spacers to two cyanobiphenyl groups as mesogens, allows for a systematic investigation of the correlations between molecular shape and symmetry, electronic effects, photochromic conversion and liquid-crystalline properties.     

Destruction of liquid-crystalline structures in paraamide polymers during swelling in water

It is shown that the sorption of water vapor in the amorphous regions of a liquid-crystalline polymer is accompanied by its swelling and the swelling pressure is responsible for the first stage of destruction of the most defective regions in the mesomorphous phase. The long-term swelling of the polymer in water leads to partial destruction of liquid-crystalline structures. The mechanism of water sorption and the dynamics of macromolecules in the liquid-crystalline paraamide polymers are studied by the method of proton magnetic resonance.     

Columnar Phases from Covalent and Hydrogen-Bonded Liquid-Crystalline Ferrocene Derivatives

The synthesis and liquid-crystalline properties of tetracatenar covalent and H-bonded bis-ferrocene derivatives 1 and 2 , respectively, are reported. Both compounds gave rise to enantiotropic columnar liquid-crystalline behavior with a hexagonal molecular organization. To explore the possibility to obtain also calamitic liquid-crystalline phases from H-bonded ferrocene-containing liquid crystals, a rod-shaped ferrocene mesogen 3 was synthesized, which gave rise to enantiotropic smectic C and smectic A phases. For the first time, a rational synthetic design at the ferrocene level led to ferrocene-based liquid-crystals with columnar behavior and to H-bonded metallomesogens.     

The 2012 Luckhurst–Samulski Prize

Abstract

This article describes the state of and progress in experimental studies of liquid crystals of naturally occurring nucleic acids and synthetic polynucleotides. The areas considered in this review include: (i) the liquid-crystalline phase of nucleic acids in aqueous salt solutions, (ii) the liquid-crystalline phase of nucleic acids in aqueous polymer solutions, (iii) the liquid-crystalline phase of nucleic acids in living systems. Some unsolved problems which are of interest from both a physicochemical and a biological point of view are discussed.     

Neutral-carrier-type potassium ion-selective electrodes based on polymer-supported liquid-crystal membranes for practical use.

Polymer-supported liquid-crystal membranes have been designed for neutral-carrier-type potassium ion-selective electrodes, aiming for practical applications of high-performance liquid-crystalline membrane ion sensors. Two types of polymer-supported liquid-crystal membranes were tested for their usefulness; one is microporous poly(tetra fluoroethylene) (PTFE) membranes impregnated by thermotropic liquid-crystalline compounds, and another is poly(methyl methacrylate) (PMMA) membrane dispersing the same liquid-crystalline compounds. Both of the polymer-supported liquid-crystal membranes containing a liquid-crystalline benzo-15-crown-5 neutral carrier as well as a lipophilic anion excluder work well as ion-sensing membranes for potassium ion-selective electrodes, the ion selectivities of which can be switched by the measurement temperatures. Specifically, PTFE-impregnated liquid-crystal membranes are better than the PMMA-dispersed ones in the sensitivity and selectivity of the resulting ion electrodes. A potassium ion assay in blood sera has proved that neutral-carrier-type ion-selective electrodes based on the polymer-supported liquid-crystal membranes are reliable for practical uses.