Enhancing Metal Separations by Liquid–Liquid Extraction Using Polar Solvents

The less polar phase of liquid–liquid extraction systems has been studied extensively for improving metal separations; however, the role of the more polar phase has been overlooked for far too long. Herein, we investigate the extraction of metals from a variety of polar solvents and demonstrate that, the influence of polar solvents on metal extraction is so significant that extraction of many metals can be largely tuned, and the metal separations can be significantly enhanced by selecting suitable polar solvents. Furthermore, a mechanism on how the polar solvents affect metal extraction is proposed based on comprehensive characterizations. The method of using suitable polar solvents in liquid–liquid extraction paves a new and versatile way to enhance metal separations.     

Extraction of metal–dye ion-association complexes by thin ether-type polyurethane membranes

The extraction and transport of various gold(III) chloride–organic dye ion-association complexes in aqueous solution through thin ether-type polyurethane membranes have been studied. The effects of the presence of salt, acid, different starting and receiving solution compositions, and temperature on the sorption process were investigated. Methylene Blue, Rhodamine B and Brilliant Green, which represent organic dyes from the thiazine, xanthene, and triphenylmethane groups, respectively, were used for this study. Gold(III) chloride and the individual organic dyes were extracted and transported through the membrane only if the solution conditions favored the formation of a neutral species. The ion-association complexes of gold(III) chloride with Methylene Blue and Rhodamine B were extracted and transported by the polymer only when the formation of the complex was more efficient than the individual extraction and transport of each of the species. The extraction of Brilliant Green under all conditions studied was very high, however, no transport occurred. The overall sorption of this dye was found to be independent of the presence of gold regardless of solution composition. High temperature resulted in a very high rate of transport of the gold(III) chloride–organic dye ion-pair.     

Enantioseparation of Dioxopromethazine Hydrochloride in Urine with Liquid–Liquid Extraction by CE-ECL Detection

Capillary electrophoresis coupled with electrochemiluminescence detection was developed for the separation and determination of dioxopromethazine hydrochloride (DPZ) enantiomers. Performance parameters of the proposed method were evaluated. An improved separation of DPZ enantiomers could be achieved after adding boric acid to buffer. The enantiomers were completely separated with running buffer of 16.5 mM β-CD in 25 mM tris-H₃PO₄–40 mM H₃BO₃ at pH 2.5. The proposed method was successfully applied to the separation and determination of DPZ enantiomers in human urine with a liquid–liquid extraction procedure.     

LC–UV Methodology for Simultaneous Determination of Lamivudine and Zidovudine in Plasma by Liquid–Liquid Extraction

This study describes an accurate, sensitive, and specific chromatographic method for the simultaneous quantitative determination of lamivudine and zidovudine in human blood plasma, using stavudine as an internal standard. The chromatographic separation was performed using a C8 column (150 × 4.6 mm, 5 μm), and ultraviolet absorbency detection at 270 nm with gradient elution. Two mobile phases were used. Phase A contained 10 mM potassium phosphate and 3% acetonitrile, whereas Phase B contained methanol. A linear gradient was used with a variability of A-B phase proportion from 98–2% to 72–28%, respectively. The drug extraction was performed with two 4 mL aliquots of ethyl acetate.     

Determination of Herbicides in Corn Flour by Novel Extraction and Gas Chromatography–Mass Spectrometry

A simple and efficient procedure was developed to determine eight herbicides in corn flour by gas chromatography–mass spectrometry in selected ion-monitoring mode. Samples were prepared with a modified, quick, easy, rapid, effective, rugged, and safe procedure. The type and volume of extraction solvent, type and amount of adsorbent, and time of sonication were optimized. The protocol method was rigorously verified. The mean recoveries were from 85 to 108% at various fortification levels with relative standard deviations below 15% and limits of quantification from 4 to 48?ng g^?1. The method was used to determine herbicides in corn flour.     

Microwave-Assisted Extraction of Melamine Residues from Pet Food and Analysis by Ion-Exchange LC–DAD

Melamine is attracting much attention because of its toxicity. In the work discussed in this paper, microwave-assisted extraction in combination with ion-exchange high-performance liquid chromatography with diode-array detection was used for analysis of melamine in pet food. Trichloroacetic acid–N,N-dimethylformamide 10:1 was the best extractant, because of the strong polarity of melamine. Separation was performed on a 250 mm × 4.6 mm i.d., 5-μm particle, cation-exchange column; isocratic elution with a mixture of ammonium formate solution (pH 3.0) and acetonitrile was complete within 10 min. UV absorbance DAD detection was performed at 240 nm. Response was a linear function of melamine concentrations from 0.1 to 50 μg mL^?1, with a detection limit of 1.0 mg kg^?1. Intra-day and inter-day precision, as RSD, was <3% and the recovery of the assay was in the range 95.4–106.8%. In analysis of spiked pet food, the new method yielded satisfactory results. Because of its simplicity and accuracy this straightforward method is particularly suitable for routine melamine analysis.     

Optimized Ultrasonic Extraction for the Determination of Polyaromatic Hydrocarbons by Gas Chromatography–Mass Spectrometry

The presence of polycyclic aromatic hydrocarbons (PAHs) in soil is an issue of concern due to their harmful effects on human health. The goal of this study was to optimize ultrasonic extraction to establish an efficient, easy, and low-cost method for the determination of 16 priority PAHs in soil. The time of extraction and solvent systems were optimized with the analysis by gas chromatography–mass spectrometry. The method was validated, and the optimum results were obtained using 1:1 cyclohexane:acetone and 1:1 hexane:acetone solvent systems with 30- and 60-min sonication times.     

Sensitive Determination of Felodipine in Human and Dog Plasma by Use of Liquid–Liquid Extraction and LC–ESI–MS–MS

Summary A sensitive and selective liquid chromatographic method coupled with electrospray ionization tandem mass spectrometry (LC–ESI–MS–MS) has been developed for quantification of felodipine in human and dog plasma. Compounds were separated on a 2.0 mm × 150 mm, 5.0 m particle, C₈ column with 1 m m ammonium acetate–acetonitrile, 20:80, pH 6.0, as mobile phase at a flow rate of 200 L min^–1. Nifedipine was used as internal standard. Plasma samples were extracted with diethyl ether, the centrifuged upper layer was evaporated, the residue was reconstituted with mobile phase, and the reconstituted samples were injected. The analytical column lasted for at least 1000 injections. By use of multiple reaction monitoring (MRM) mode in MS–MS felodipine and nifedipine were detected without severe interference from the human or dog plasma matrix. Felodipine produced a protonated precursor ion ([M + H]⁺) at m/z 384 and a corresponding product ion at m/z 338. And internal standard (nifedipine) produced a protonated precursor ion ([M + H]⁺) at m/z 347 and a corresponding product ion at m/z 315. Detection of felodipine in human and dog plasma was accurate and precise, with a limit of quantification of 0.05 ng mL^–1. The method has been successfully applied to preliminary pharmacokinetic study of felodipine in human and dog plasma.     

Microwave-Assisted Solvent Extraction of Melamine from Seafood and Determination by Gas Chromatography–Mass Spectrometry: Optimization by Factorial Design

Melamine attracts considerable attention because of its toxicity. The determination of melamine in seafood was performed by gas-chromatography–mass spectrometry, using an optimized version of a method adopted by the U.S. Food and Drug Administration. The melamine was extracted by closed-vessel microwave-assisted solvent extraction (MAE), as a valid alternative in sample preparation, to reduce analysis time and provide less ambiguous data. The procedure was optimized by means of experimental factorial design considering the three main variables that affect this process: microwave oven power, the maximum temperature inside the extraction tube, and the hold time. The recovery of melamine in spiked samples was used as the elemental response value of the design. Temperature and hold time had a more positive effect on the response than the microwave power. A significant positive interaction was observed between oven power and hold time. A temperature of 70°C and a hold time of 1 min gave a recovery of 92 ± 5% for a microwave power of 600 W. Under these conditions, the total microwave extraction time was approximately 2 minutes, a much shorter time compared to the ultrasonic bath, which required a total time of 40 min. The repeatability of the method was approximately 3%. The limits of quantification were 0.55 mg kg^?1 for MAE and 1.9 mg kg^?1 for the ultrasonic bath; the linearity was confirmed up to 10 mg kg^?1. In conclusion, the MAE procedure was shown to be an excellent alternative to the official method.     

Determination of Aflatoxins in Rice and Maize by Ultra-High Performance Liquid Chromatography–Tandem Mass Spectrometry with Accelerated Solvent Extraction and Solid-Phase Extraction

A fast and reliable ultra-high performance liquid chromatography–tandem mass spectrometry method was developed for the determination of aflatoxins B₁, B₂, G₁, and G₂ in cereal. The analytes were extracted by accelerated solvent extraction with methanol/water (80:20). A polymeric solid-phase extraction column was used for sample preparation. Under optimum conditions, the analyte recoveries for samples spiked at different concentration levels in rice and maize ranged from 71.2 to 94.0%, with relative standard deviations less than 16.4%. Limits of detection (signal-to-noise ratio, 3:1) for the aflatoxins ranged from 0.25 to 0.93 ng/g. The developed method was applied to the determination of aflatoxins in ten rice and maize samples. One maize sample tested positive with an aflatoxin B₁ concentration of 2.7 ng/g.     

Simultaneous Analysis of Selected Typical Antibiotics in Manure by Microwave-Assisted Extraction and LC–MS n

Analysis of antibiotics in the environment has become an urgent issue. A novel method entailing microwave-assisted extraction (MAE) and high-performance liquid chromatography–electrospray mass spectrometry (LC–MS ⁿ ) has been developed for determination of selected typical antibiotics, including quinolones, sulfonamides, and tetracyclines, in manure. Compared with ultrasonic extraction, MAE significantly increased recovery of fluoroquinolones (63–106%), sulfonamides (64–133%), and tetracyclines (64–109%) from manure. Acetonitrile acidified with formic acid buffer solution (pH 4.0) was used for extraction of swine manure whereas chicken manure was extracted with 0.1 M EDTA–McIlvaine buffer solution. Limits of quantification (LOQ) for all compounds were in the range 5.12–168.4 μg kg^?1 dry matter, which were satisfactory for analysis of all samples. The suitability of the method was assessed by analysis of manure from six different sites.     

Simultaneous Analysis of Organophosphorus Pesticides in Water by Magnetic Solid-Phase Extraction Coupled with GC–MS

Magnetic solid-phase extraction (MSPE) coupled with gas chromatography–mass spectrometry was applied for the analysis of organophosphorus pesticides (OPPs) in water samples. We chose C18-functionalized Fe₃O₄@mSiO₂ microspheres as the magnetic sorbents to extract and enrich OPPs from water samples with the advantages of good solubility in water, large surface area and fast separation ability. In this study, six kinds of OPPs were analyzed and various parameters of MSPE procedure, including eluting solvent, the amount of magnetic absorbents and extraction time were optimized. Validation experiments showed that the optimized method had good linearity with correlation coefficients r ² > 0.98 and satisfactory precision with the relative standard deviation ≤10.7 %. The limits of detection were 1.8–5.0 μg L^?1 and the limits of quantification ranged from 6.1 to 16.7 μg L^?1. We concluded that the proposed method was successfully applied to analyze OPPs in real water samples and the results indicated that it had the advantages of simplicity, convenience and efficiency.     

Analysis of Biologically Active Constituents in Centella asiatica by Microwave-Assisted Extraction Combined with LC–MS

Centella asiatica (L.) Urban is a traditional herbal medicine used in Asiatic countries, and is commonly used to treat various wounds, leprosy, tuberculosis and lupus diseases. In this work, a new method based on microwave assisted extraction followed by liquid chromatography–diode array detection–electrospray ionization multistage tandem mass spectrometry analysis has been developed for the identification and quantification of biologically active constituents in C. asiatica, including asiatic acid, asiaticoside and madecassoside. The separation was performed on an Agilent Eclipse C₁₈ column (150 mm × 4.6 mm i.d., 5 μm) with gradient elution of acetonitrile and 0.1% aqueous acetic acid within 50 min. Detection was performed at 205 nm. The calibration curves showed good linearity (r ² > 0.9992). The limits of detection ranged from 1.2 to 1.6 μg mL^?1. The intra- and inter-day precision was less than 3% and the recovery of the assay was in the range of 95.4–106.8%. The method was successfully applied to the quantification of the three constituents in different samples of C. asiatica. The results indicated that the developed method could be considered to be a simple, rapid and reliable method for the quality evaluation of C. asiatica. The samples were also analyzed on a liquid chromatography–electrospray ionization–time-of-flight mass spectrometry system to confirm the identification results.     

Rapid Extraction of Imidacloprid in Tomatoes by Ultrasonic Dispersion Liquid–Liquid Microextraction Coupled with LC Determination

A simple method for the extraction and determination of trace imidacloprid in tomatoes was developed using ultrasonic dispersion liquid–liquid microextraction coupled with liquid chromatographic separation. An ultrasonic dispersion process was applied to accelerate the formation of the fine cloudy solution without using disperser solvents, which was markedly increased the extraction efficiency and reduced the equilibrium time. The results revealed that tetrachloroethane as extraction solvent could be directly applied to the filtered tomato juice with the assistance of ultrasonic dispersion. Under the optimum condition, the enrichment factor of imidacloprid could reach 375 folds and the average recovery of samples ranged from 87.6 to 110% with RSD less than 4.5% (n = 3). Compared to the conventional sample pretreatment method, the proposed method had the advantage of short time, simple operation, high sensitivity and low consumption of organic solvent.     

Extraction of Anthraquinones from Rhubarb by a Molecularly Imprinted–Matrix Solid-Phase Dispersion Method with HPLC Detection

A simple method based on matrix solid-phase dispersion for selective extraction of anthraquinones from rhubarb samples was developed using a molecularly imprinted polymer as sorbent. The molecularly imprinted polymer was prepared using emodin as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linking agent. The polymer was characterized by scanning electron microscopy and Fourier-transform infrared spectrometry. Isothermal adsorption and dynamic adsorption experiments were performed. The best extraction conditions for anthraquinones were obtained at a ratio of molecularly imprinted polymer to sample of 1:1, a dispersion time of 5 minutes, with 5% aqueous methanol as the washing solvent, and an elution solvent of methanol-acetic acid (99:1, v/v). Once the matrix solid-phase dispersion process was optimized, the extract was reacted with 8% hydrochloric acid for hydrolysis. The anthraquinones extracted from rhubarb were determined by liquid chromatography. The detection limits of chrysophanol, emodin, physcion, and aloe-emodin were 0.23, 0.24, 0.28, and 0.27 µg mL^?1, respectively. The proposed method was compared with the method in Chinese pharmacopoeia, and the results show that the extraction yield of anthraquinones obtained by molecularly imprinted polymer–matrix solid-phase dispersion method was higher. Moreover, the proposed method is faster and simpler and can achieve extraction and purification in the same system.     

Determination of Polycyclic Aromatic Hydrocarbons in Mosses by Ultrasonic-Assisted Extraction and Gas Chromatography–Tandem Mass Spectrometry

A facile method for the determination of polycyclic aromatic hydrocarbons in mosses is reported using ultrasonic-assisted extraction and gas chromatography–tandem mass spectrometry. The efficiency of ultrasonic-assisted extraction and the reagents was optimized. Tandem mass spectrometry with selective reaction monitoring was used to enhance the selectivity to reduce matrix interferences and simplify the purification protocol. The detection limits were from 0.1 to 2.0?ng/mL. The linear calibration range was two orders of magnitude and the coefficients of linear correlation exceeded 0.9992 for all analytes. The relative standard deviations within 1 day and 3 days were less than 9.0%. Recoveries from 56.8 to 109.0% were obtained in fortified mosses. The rapid, low solvent gas chromatography–tandem mass spectrometry method was used to determine polycyclic aromatic hydrocarbons in mosses.     

Speciation of Arsenic in Rice by High-Performance Liquid Chromatography–Hydride Generation-Atomic Fluorescence Spectrometry with Microwave-Assisted Extraction

Arsenic speciation in paddy rice is of considerable interest due to its impact on the food safety and human health. In this study, a simple methodology was developed to simultaneously extract and analyze As species in rice from China. Arsenic species, including arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA), were extracted by methanol-water (50:50, v/v) containing 0.02 mol L^?1 nitric acid with a microwave-assisted procedure, and then determined by high performance liquid chromatography–hydride generation-atomic fluorescence spectrometry (HPLC–HG-AFS). The results showed that the method has good efficiency (>90%) for rice, indicating that there were no significant losses or transformations of arsenic during sample treatment and analysis. The limits of quantification (LOQ) of the method were 8.0, 20, 12, and 12 ng g^?1 for As(III), As(V), DMA, and MMA, respectively. When this method was applied to the analysis of rice, As(III) had the highest concentration, followed by DMA, As(V), and MMA. The estimated weekly intake of inorganic As from rice by Chinese people accounted for 11.83% of the provisional tolerable weekly intake. The As speciation results in this study suggest that the risk associated with As in rice to human health may be negligible.     

Extraction of vanadyl porphyrins in crude oil by inclusion dispersive liquid–liquid microextraction and nano-baskets of calixarene

The novelties of this approach are introducing the self-settled dispersive liquid–liquid microextraction technique to remove the centrifuging step, conducting the dispersive liquid–liquid microextraction in complex organic systems, applicability of water as disperser phase, and inclusion microextraction of charged porphyrins by nano-baskets of calix[4]arenes, which act as the settling agents as well as the inclusion ligands. Diacid p-tert-butylcalix[4]arene in the cone conformation was synthesized and used. The related parameters including ligand concentration, volume of water disperser, salt effect, and extraction time were optimized. The linear range, detection limit (S/N?=?3) and precision (RSD, n?=?6) were determined to be 0.2–50, 0.07?μg?L^?1 and 5.3%, respectively. The established method was applied to determine the target compound in five samples of live crude oil, were sampled from an Iranian offshore field. Owing to the overall differences (such as organic media, inclusion extraction, water-soluble ligands, etc.), the comparison of the proposed method with the traditional liquid–liquid microextraction was inapplicable. These results revealed that the new approach is competitive analytical tool and an alternative of the traditional methods in the crude oil and related systems. Moreover, in those systems that the inclusion separation is not requested, it is possible to use a tertiary system including a proper extraction agent/solvent and calixarene phase, as settling agent, along with the aqueous disperser in the organic systems.     

Thermodynamic Approach of Uranium(VI) Extraction by N,N-(2–ethylhexyl)Isobutyramide

The study of extraction of U(VI) from LiNO3 media by N,N-(2-ethylhexyl)isobutyramide (DEHiBA) in dodecane has been performed at 25.00 °C using isothermal titration microcalorimetry. The raw heat measured is a sum of contributions. To obtain the net extraction enthalpy variation, different heats have to be evaluated as the dilution of amide into dodecane phase which has been measured and subtracted. The microcalorimetric extraction results are then compared to data obtained by Van’t Hoff classical method. The extraction enthalpies obtained by both methods are similar. This first study allowed to define the experimental calorimetric conditions and will be followed by determination with other actinides and amides.     

Extraction and Determination of Two Antidepressant Drugs in Human Plasma by Dispersive Liquid–Liquid Microextraction‒HPLC

In this study, an effective method of ultrasound-assisted ionic liquid based dispersive liquid–liquid microextraction (UA?IL?DLLME) coupled with HPLC was applied for extraction and determination of two antidepressant drugs: venlafaxine hydrochloride and amitriptyline hydrochloride from human plasma samples. Three ionic liquids were studied: 1-butyl-3-methyl imidazolium hexafluorophosphate, 1-hexyl-3- methyl imidazolium hexa-fluoro-phosphate, and 1-octyl-3-methyl imidazolium hexafluorophosphate [C8MIM][PF6]. Various factors affect the stages and efficiency of extraction, some of which are pH of sample solution, type and volume of ionic liquid, the time of ultrasonication, centrifuging time and rate, and the ionic strength of solution. In this research, optimum conditions were obtained as 55 μL of [C8MIM][PF6] selected as ionic liquid, pH 11, 2% NaCl, 4 min ultrasonication and 5 min centrifuging at 3500 rpm. Under the optimized conditions, the linearity was obtained in the range of 0.2 to 250 μg/L. The limits of detection were 0.5 μg/L for venlafaxine and 0.8 μg/L for amitriptyline. Pre-concentration factors were 1.3 × 10³ for venlafaxine and 1.2 × 10³ for amitriptyline. The UA?IL?DLLME method coupled with HPLC was successfully used for the determination of venlafaxine and amitriptyline spiked into the real samples of human plasma.