均分散超微细α-Fe2O3水溶胶的制备

均分散微米、亚微米或纳米级α-Fe_2O_3的制备包括静态水解法［1－3］、沸腾回流水解法[4]以及微乳液反应法[5]．随着粒子尺寸的减少,则体系具有明显的表面和体积效应[6]以及光电化学性质[7]．预计均分散超微细α-Fe_2O_3将会在催化、材料等许多新技术领域获得重要的应用．但以FeCl3为原料的水解法,Fb3十浓度一般在0．02－0．04mol·L－1很窄的浓度范围之内,超出该浓度范围将得到足β-FeOOH而不是α-Fe_2O_3[8]．以Fe（NO3）3为原料,虽然Fe3十浓度可增至0．2mol·L－1,但随之而来的不利因素：（1）水解时间增加几倍;（2）产率…     

草酸在α-Fe_2O_3上吸附的磁性研究

α—Fe_2O_3是多种工业催化剂的主要成分,有反铁磁结构的特殊性.张和Matijevie的实验曾经发现,草酸在均匀α-Fe_2O_3胶体粒子上的吸附随温度的升高而增加,这可能暗示着草酸从物理吸附向化学吸附的过渡.考虑到磁学测量需要更为明显的表面效应,我们制备了较小的α-Fe_2O_3粒子,并测定其吸附草酸前后的磁化率变化。     

乙醇在相转化中的抑制作用

实验表明在发生相转化的FeCl_3-HCl水解体系中，醇的存在起到了相转化抑制剂的作用，降低了α-Fe_2O_3沉淀组分的过饱和浓度，减少了成核数目，有利于形成较大的均匀胶体粒子．粒子尺寸随浓度的增加而加大，形状因球形趋变为立方体．     

EDTA对均匀胶体粒子形成的影响

特殊阴离子是决定金属盐升温水解制备均匀胶体粒子形态的重要因素之一. EDTA的存在强烈影响三价铁盐水解产物-均匀α-Fe_2O_3和β-FeOOH胶体粒子的形态. 其影响机理是EDTA在成长中的微粒子上络合吸附和溶液中的EDTA与Fe~(3+)离子间络合反应的复合结果. 前者趋于形成较大的聚合粒子; 后者趋于形成较小粒子. 进而, 凡是能够改变EDTA络合吸附状态和吸附量的. 存在于陈化液中的一切其它阴离子均会改变EDTA的作用程度.     

α-Fe_2O_3的制备及α-Fe_2O_3@SiO_2复合纳米材料的吸附性能

采用不同分子结构的有机含氮化合物作为包裹剂成功制备了具有弱磁性的α-Fe_2O_3纳米颗粒,其形貌可以实现由饼状到不规则长方体及长方体的转变.构成该α-Fe_2O_3纳米颗粒的前驱体α-FeOOH呈现梭形结构,通过一锅法可以在梭形α-FeOOH外面包裹一层介孔二氧化硅,煅烧后制备的α-Fe_2O_3@SiO_2复合纳米材料对水相中的亚甲基蓝有良好的吸附效果,室温下最高去除率达97.3%.针对制备的材料进行了XRD、SEM及磁学性能表征.     

Sn掺杂对氧空位型α-Fe_2O_3纳米颗粒光解水性能的影响

在退火前未抽真空条件下,采用滴涂法在常压氮气氛围中退火制备了含氧空位的α-Fe_2O_3纳米颗粒.通过在空气和氮气氛围中退火和向前驱体溶液直接加入SnCl_4制备的α-Fe_2O_3的方法研究了Sn掺杂对氧空位型的α-Fe_2O_3纳米颗粒光催化性能的影响.结果表明,氮气氛围中退火Sn掺杂得到的的α-Fe_2O_3在1.23V vs.RHE时的电流密度分别是氮气氛围中退火未掺杂的α-Fe_2O_3的35倍和空气氛围中退火Sn掺杂的α-Fe_2O_3的15倍,氮气氛围中退火和掺杂被证明是获得高催化性能必不可少的条件.Mott-Schottky曲线和交流阻抗谱表明,掺杂和氧空位能增大催化剂的载流子浓度的电导率.在牺牲剂溶液中测试发现,Sn掺杂导致材料的表面反应速率提高是催化剂活性的重要影响因素.     

凝集素修饰的Fe_2O_3@Au纳米粒子与SW620细胞的相互作用研究

首先采用共沉淀法及交互盐酸羟胺还原法制备Fe_2O_3@Au核壳结构纳米粒子,利用凝集素修饰纳米粒子(Lectin-Fe_2O_3@Au NP),然后通过动态光散射(DLS)/聚丙烯酰胺凝胶电泳/磁滞回曲线进行表征。利用MTT法测纳米粒子的细胞毒性,将不同浓度的Lectin-Fe_2O_3@Au与结直肠癌SW620细胞相互作用,普鲁士蓝进行染色,使用紫外可见光谱法(UV-Vis)和光学显微镜进行观察。结果表明凝集素修饰的纳米粒子在细胞培养基中能够稳定存在,当纳米粒子浓度为0.72 n M时,结直肠癌SW620细胞的存活率仍高于90%,其作用强度依次为蓖麻凝集素(RCA)-Fe_2O_3@Au麦胚凝集素(WGA)-Fe_2O_3@Au伴刀豆素(Con A)-Fe_2O_3@Au,经过普鲁士蓝染色的细胞可以观察到RCA-Fe_2O_3@Au纳米粒子的存在,表明凝集素RCA具有作为修饰纳米粒子与结直肠癌SW620细胞靶向识别的潜力。     

氧化铁负载铂纳米簇催化卤代硝基苯本体氢化性质研究

复相金属催化剂中的载体效应研究具有重要意义。我们以结构不同的氧化铁载体吸附"非保护型"Pt金属纳米簇制备了具有相同Pt纳米簇的Pt/Fe_3O_4、Pt/γ-Fe_2O_3和Pt/α-Fe_2O_3催化剂,考察了其在无溶剂条件下(本体条件)催化邻氯硝基苯(o-CNB)选择性氢化反应的性能,发现三种铂/氧化铁催化剂的催化选择性远高于商购铂/碳催化剂,Pt/γ-Fe_2O_3和Pt/α-Fe_2O_3的催化选择性明显高于Pt/Fe_3O_4,而Pt/Fe_3O_4的催化活性较Pt/α-Fe_2O_3高50%。铂/氧化铁对不同卤代硝基苯的本体选择性氢化反应表现出优良的催化性能,相应卤代苯胺产物的选择性均可达到99%以上。考察了温度、氢气压力对Pt/Fe_3O_4催化o-CNB本体氢化性能的影响。本工作为理解氧化铁负载金属纳米簇催化剂的特殊催化性质,进而发展高效金属纳米簇基催化体系提供了新的基础。     

均匀铁氧化物（含水）胶体粒子的制备

均匀胶体具有广阔的应用前景,开展这种胶体的研究具有重要的理论和实际意义。铁氧化物(含水)均匀胶体粒子首先在Matijevi’c的实验室制得。不久前,我们在无防尘设备的一般实验室条件下成功地制得了二种直径为0.090μm的球状α-Fe_2O_3胶体粒子,并开展了均匀胶体的性质研究。为了进一步开展均匀胶体特性及其表面性质的研究,就要制取不同大小和不同形状的胶体粒子,并掌握其制备规律。本文旨在探讨制备铁氧化物胶体粒子对反应液铁离子的浓度、盐酸量以及陈化时间等因素对粒子物相、形状等的影响。     

F和Co共掺杂羟基磷灰石增强α-Fe2O3光阳极光电催化水氧化的性能研究

表面修饰产氧助催化剂是提高α-Fe_2O_3光电催化水氧化反应效率的重要手段.通过水热法在α-Fe_2O_3表面构筑F掺杂羟基磷灰石(F-HAP),并在此基础上通过离子交换法制备了F、Co共掺杂HAP表面修饰的α-Fe_2O_3光阳极(FCo-HAP/α-Fe_2O_3).采用X射线衍射、扫描电子显微镜、紫外可见吸收光谱、电化学阻抗谱等表征了FCo-HAP/α-Fe_2O_3结构、电化学性质和光电催化水氧化性能,并与F-HAP/α-Fe_2O_3和Co-HAP/α-Fe_2O_3等进行了对比.结果表明,F掺杂能降低α-Fe_2O_3表面HAP晶粒的尺寸,提高Co-HAP/α-Fe_2O_3的电化学活性面积,促进光生电荷向电解质转移,最终提高了α-Fe_2O_3表面的光电催化水氧化性能.     

Radical graft polymerization onto composite particles of polydimethylsiloxane and polybutadiene

Submicron-size composite polymer particles consisting of polydimethylsiloxane/core and polybutadiene/shell were synthesized by seeded emulsion polymerization. The morphologies of composite particles were affected by polybutadiene ratio in the composite particles. Highly grafted polymer by poly(styrene-co-acrylonitrile) could be prepared by using the composite particles containing polybutadiene with polymerizable group. The morphologies of the grafted polymer were influenced by the morphologies of composite particles and the kinds of grafting initiators. It was found that surface gloss and lubricity of the graft polymers were influenced by morphologies of composite particles.     

The Aqueous Dispersions of Bicontinuous Cubic Phases Formed by Precursor Method

The morphologies and the microstructures of the dispersed particles of the cubic phase, which were formed by precursor method, were studied. The freeze-fracture TEM clearly showed that the aqueous dispersed particles have irregular cubic shapes. X-ray diffraction technique has been utilized to study the microstructure of the particles and it was found that these particles still retained the cubic character. The sizes of the particles were measured by dynamic light scattering, and the results showed that the sizes of the dispersed particles were between 200～400 nm under different conditions.     

甲基丙烯酸甲酯/纳米SiO_2粒子分散液的细乳化和细乳液聚合

对包含纳米SiO2粒子的甲基丙烯酸甲酯(MMA)的细乳化和细乳液聚合行为进行了研究.发现在超声细乳化过程中,90%以上的分散于MMA相的纳米SiO2粒子将从油相逃逸到水相.采用甲基丙烯酸3-(三甲氧基甲硅烷基)丙酯(MPS)偶联剂处理SiO2粒子,可以增加其表面亲油性,抑止这种逃逸,经测定几乎全部SiO2粒子在超声细乳化后仍稳定停留在细乳化亚微液滴中.通过进一步细乳液聚合,得到了分散稳定、界面清晰的包裹有纳米SiO2粒子的聚甲基丙烯酸甲酯复合粒子乳液.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Atomic Force Microscopy Study of Ultrafine Particles Prepared in Reverse Micelles

The imaging of ultrafine Au, Pd, CdS, and ZnS particles prepared in reverse micelles has been studied by atomic force microscopy (AFM). Mica substrates, derivatized with a monolayer of amine or thiol-terminated silanes, were used to immobilize the particles. The substrates were exposed to reverse micellar solutions containing the particles and were then immersed in appropriate solvent media to remove surfactants. This resulted in a partial coating of the surfaces by the particles. The particle size was estimated as the height of protrusion, shown on the AFM images. The size values for the Pd and CdS particles, thus obtained, were found to be almost identical to those obtained by transmission electron microscopy (TEM), whereas those for the Au and ZnS particles were larger than those obtained by TEM. Scanning electron microscopy showed that the Au particles tended to aggregate on the surfaces, while Pd particles were isolated from one another. Copyright 2000 Academic Press.     

Surface modification of crosslinked poly(styrene-divinyl benzene) micrometer-sized particles of narrow size distribution by ozonolysis

Micrometer-sized polystyrene template particles of narrow size distribution were prepared by dispersion polymerization of styrene in 2-methoxyethanol. Uniform micrometer-sized polystyrene/crosslinked poly(styrene-divinyl benzene) composite particles were formed by a single-step swelling process of the template particles with styrene, divinyl benzene and benzoyl peroxide, followed by polymerization at 70 degrees C. Uniform micrometer-sized crosslinked poly(styrene-divinyl benzene) particles of higher surface area were produced by dissolution of the template polystyrene part of the former composite particles with N,N-dimethylformamide. Hydroperoxide conjugated crosslinked poly(styrene-divinyl benzene) particles were produced by ozonolysis of these particles. The effect of ozonolysis conditions, such as exposure time and flow rate of the ozone, on the hydroperoxide conjugation to the crosslinked particles was also studied. Functionalization of the crosslinked poly(styrene-divinyl benzene) particles was performed by graft polymerization of vinylic monomers such as acrylonitrile and chloromethylstyrene on the hydroperoxide conjugated crosslinked particles. This was accomplished by raising the temperature (e.g., 70 degrees C) of deairated acetonitrile dispersions containing the hydroperoxide conjugated particles and the vinylic monomers. The influence of various polymerization parameters on the grafting yield, e.g., monomer concentration, conjugated hydroperoxide concentration, and temperature, was also elucidated.     

聚硅氮烷包敷纳米铁磁粉PSZFe的合成及其雷达波吸收性能研究

金属磁性材料是一类很重要的雷达波吸收材料 ,而纳米铁磁粉是其中的姣姣者 ,具有质量轻、居里温度高、磁化强度高 (可以是铁氧体磁性材料的 2～ 3倍 ) [1,2 ] 、矫顽力大、雷达波吸收性能好和频带宽等优点[3 ] ;但由于其颗粒太细 ,暴露在空气中即被强烈氧化 ,实际应用很困难 ,对其进行包敷处理是一种很有效的抗氧化腐蚀方法 .聚硅氮烷(PSZ)做为纳米铁磁粉包敷层有很多优点 :包敷层所要求的化学和力学性能可以通过调整氯硅烷单体的比例以及反应条件而实现[4] ;包敷层具有高致密性、高疏水性 ,从而使潮气、水和氧气很难侵入 ;包敷层耐热性好…     

Distribution of macropores in silica particles prepared by using multiple emulsions

The distribution of macropores in silica particles prepared by the hydrolysis and condensation of TEOS in a hexane/water/decyl alcohol (O(1)/W/O(2)) multiple emulsion was investigated. To stabilize the emulsion structure, hydroxypropyl cellulose (HPC) was added into the O(2) phase and polyethylene glycol (PEG) was added into the water phase. Without HPC, the particles have an irregular shape and hardly have particulate forms. As the concentration of HPC increases, the shape of particles becomes more and more spherical and the size decreases. The size of silica particles was varied from 5 to 1 microm as the concentration of HPC increased from 0.5 to 0.7 wt%. The number and size of the macropores in silica particles were affected by PEG polymer concentration. With the variation in the concentration of PEG, macropores in silica particles were located at the surface of or inside the particles. At high concentrations of PEG, the macropores in particles were located inside the particles, but at low concentrations of PEG the macropores were located at the surfaces of particles. Interestingly, the particles of dimpled surfaces were formed when the molar ratio of water to TEOS (R(w)) was 4.0 and the concentrations of PEG and HPC were 2.0 and 0.7 wt% respectively. The surface areas of dimpled silica particles and completely spherical particles, measured by the BET method, were 409 and 433 m(2)/g respectively.     

光敏共聚物P(St/VM-co-MA)自组装胶体粒子及其性能

以苯乙烯类光敏单体7-(4-乙烯基苄氧基)-4-甲基香豆素(VM)、苯乙烯(St)、马来酸酐(MA)为共聚单体,采用自由基聚合法制备了光敏性双亲共聚物P(St/VM-co-MA).在选择性溶剂(N,N-二甲基甲酰胺(DMF)/H2O)中对P(St/VM-co-MA)进行自组装,用透射电镜(TEM)和动态激光光散射(DLS)表征了自组装胶体粒子的形态、粒径大小及其分布.利用紫外光照使胶体粒子中香豆素基元发生光二聚反应,形成交联胶体粒子,并用紫外-可见光分光光度计(UV-Vis)跟踪其交联过程.用DLS研究了交联和未经交联胶体粒子的粒径和结构稳定性,用激光扫描共聚焦显微镜(LSCM)和光学显微镜考察了胶体粒子的乳化、包覆性能.结果表明:交联和未经交联胶体粒子均具有乳化性,且在乳化过程中可实现对油溶性染料的包覆.胶体粒子交联后,粒径有所减小,结构稳定性、乳化性能、包覆性能均有所提高.     

Influence of surface properties of particles on their adhesion and removal

The effect of surface properties of particles on their adhesion and removal was investigated using an immersed system consisting of nylon particles and a quartz plate. The nylon particles were dyed with a reactive dye in order to change their properties and were used for the adhesion and removal experiments in comparison with undyed particles. The electrokinetic potentials of the particles were measured by micro-electrophoresis and the Hamaker constants were independently evaluated using experimental values of dispersive component of surface free energy determined by the Wilhelmy technique. The experimental results were used for the discussion of particle adhesion and removal on the basis of the heterocoagulation theory. The differences in adhesion and removal efficiencies between dyed and undyed particles were explained in terms of the electrostatic and dispersive van der Waals interaction by considering the differences in thier properties, the electrokinetic potential and the Hamaker constant, due to dyeing.