The SmCPA phase in five‐ring bent‐core compounds derived from 5‐methoxyisophthalic acid

The synthesis and mesophase characterization of a homologous series of five‐ring bent‐core compounds derived from 5‐methoxyisophthalic acid are described. Most of the compounds exhibit a polar antiferroelectric smectic C phase. Replacement of the terminal n‐alkoxy chains by n‐alkyl carboxylate groups, not only destabilizes the formation of mesophases but induces a calamitic mesophase. However, extension of the arms of the bent‐core molecule by a phenyl moiety stabilizes the switchable phase. The mesophases were investigated using a combination of polarizing optical microscopy, differential scanning calorimetry, X‐ray diffraction and electro‐optical methods.     

Self‐Assembly of Imidazolium‐Based Rodlike Ionic Liquid Crystals: Transition from Lamellar to Micellar Organization

By using aryl‐amination chemistry, a series of rodlike 1‐phenyl‐1H‐imidazole‐based liquid crystals (LCs) and related imidazolium‐based ionic liquid crystals (ILCs) has been prepared. The number and length of the C‐terminal chains (at the noncharged end of the rodlike core) and the length of the N‐terminal chain (on the imidazolium unit in the ILCs) were modified and the influence of these structural parameters on the mode of self‐assembly in LC phases was investigated by polarizing microscopy, differential scanning calorimetry, and X‐ray diffraction. For the single‐chain imidazole derivatives nematic phases (N) and bilayer SmA₂ phases were found, but upon increasing the number of alkyl chains the LC phases were lost. For the related imidazolium salts LC phases were preserved upon increasing the number and length of the C‐terminal chains and in this series it leads to the phase sequence SmA–columnar (Col)–micellar cubic (Cub_I/Pm3n). Elongation of the N‐terminal chain gives the reversed sequence. Short N‐terminal chains prefer an end‐to‐end packing of the mesogens in which these chains are separated from the C‐terminal chains. Elongation of the N‐terminal chain leads to a mixing of N‐ and C‐terminal chains, which is accompanied by complete intercalation of the aromatic cores. In the smectic phases this gives rise to a transition from bilayer (SmA₂) to monolayer smectic (SmA) phases. For the columnar and cubic phases the segregated end‐to‐end packing leads to core–shell aggregates. In this case, elongation of the N‐terminal chains distorts core–shell formation and removes Cub_I and Col phases in favor of single‐layer SmA phases. Hence, by tailoring the length of the N‐terminal chain, a crossover from taper‐shaped to polycatenar LC tectons was achieved, which provides a powerful tool for control of self‐assembly in ILCs.     

Polymeric dopant effects of bent‐core covalent‐bonded and hydrogen‐bonded structures on banana‐shaped liquid crystalline complexes

Two series of banana‐shaped liquid crystalline (LC) H‐bonded complexes HP_m / CB_n (i.e., bent‐core H‐bonded side‐chain homopolymer HP mixed with bent‐core covalent‐bonded small molecule CB ) and CP_m / HB_n (i.e., bent‐core covalent‐bonded side‐chain homopolymer CP mixed with bent‐core H‐bonded small molecular complex HB ) with various m/n molar ratios were developed. The bent‐core covalent‐ and H‐bonded structural moieties were homopolymerized in the banana‐shaped LC H‐bonded complexes HP_m / CB_n and CP_m / HB_n , respectively. The influences of m/n molar ratios (polymeric moieties vs. small molecular moieties) on the mesomorphic and electro‐optical properties of both banana‐shaped LC H‐bonded complexes HP_m / CB_n and CP_m / HB_n were investigated. The polar smectic phases could be achieved and stabilized by smaller contents of polymeric dopants in banana‐shaped LC H‐bonded complexes, such as HP1/CB10 , HP1/CB15 , CP1/HB10 , and CP1/HB15 , which possessed tunable spontaneous polarization (Ps) values according to the molar ratios of m/n , that is, lower Ps values obtained in H‐bonded complexes HP_m /CB_n and CP_m / HB_n with higher ratios of H‐bonded moieties (larger m/n molar ratios), respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 764–774, 2010     

Luminescent Ionic Liquid Crystals from Self‐Assembled BODIPY Disulfonate and Imidazolium Frameworks

A series of modular mesogenic salts based on the combination of anionic 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (F‐BODIPY) 2,6‐disulfonate dyes and trialkoxybenzyl‐functionalised imidazolium cations has been designed and synthesised. Each salt contains a rigid dianionic BODIPY core associated with two imidazolium cations functionalised by 1,2,3‐trialkoxybenzyl (alkyl=n‐C₈, n‐C₁₂ or n‐C₁₆) units or, in one case, with imidazolium cations functionalised by a trialkylgallate (3,4,5‐trialkoxybenzoate) unit in which the 3,5‐dialkyl groups are terminated with a polymerisable acrylate entity. All these compounds were highly fluorescent in solution with quantum yields ranging from 54 to 62 %. In the solid state, the width of the emission band observed at around 650 nm is a clear signature of aggregation. With the trialkoxybenzylimidazolium cations, polarised optical microscopy (POM) and X‐ray scattering experiments showed that columnar mesophases were formed. Differential scanning calorimetry (DSC) studies confirmed the mesomorphic behaviour from room temperature to about 130 °C for salts with alkyl chains containing 8, 12 and 16 carbon atoms. The strong luminescence of the BODIPY unit was maintained in the mesophase and fluorescence measurements confirmed the presence of J aggregates in all cases. The salt containing the gallate‐functionalised imidazolium cations showed no mesomorphism but the acrylate terminal units could be used to engender photoinitiated polymerisation thereby allowing the material to be immobilised on glass plates. The polymerisation process was followed by FTIR spectroscopy and the fixed and patterned films were highly fluorescent with a solid‐state emission close to that of the complex in the solid state.     

T-shaped ionic liquid crystals based on the imidazolium motif: exploring substitution of the C-2 imidazolium carbon atom

In this contribution the first examples of so‐called rigid‐core, T‐shaped imidazolium ionic liquid crystals, in which the C‐2 atom of the imidazolium ring is substituted with an aryl moiety decorated with one or two alkoxy chains, are described. The length of the alkoxy chain(s) was varied from six to eighteen carbon atoms (n=6, 10, 14–18). Whereas the compounds with one long alkoxy chain display only smectic A phases, the salts containing two alkoxy chains exhibit smectic A, multicontinuous cubic, as well as hexagonal columnar phases, as evidenced by polarising optical microscopy, differential scanning calorimetry, and powder X‐ray diffraction. Structural models are proposed for the self‐assembly of the molecules within the mesophases. The imidazolium head groups and the iodide counterions were found to adopt a peculiar orientation in the central part of the columns of the hexagonal columnar phases. The enantiotropic cubic phase shown by the 1,3‐dimethyl‐2‐[3,4‐bis(pentadecyloxy)phenyl]imidazolium iodide salt has a multicontinuous Pm$\bar 3In this contribution the first examples of so-called rigid-core, T-shaped imidazolium ionic liquid crystals, in which the C-2 atom of the imidazolium ring is substituted with an aryl moiety decorated with one or two alkoxy chains, are described. The length of the alkoxy chain(s) was varied from six to eighteen carbon atoms (n=6, 10, 14-18). Whereas the compounds with one long alkoxy chain display only smectic A phases, the salts containing two alkoxy chains exhibit smectic A, multicontinuous cubic, as well as hexagonal columnar phases, as evidenced by polarising optical microscopy, differential scanning calorimetry, and powder X-ray diffraction. Structural models are proposed for the self-assembly of the molecules within the mesophases. The imidazolium head groups and the iodide counterions were found to adopt a peculiar orientation in the central part of the columns of the hexagonal columnar phases. The enantiotropic cubic phase shown by the 1,3-dimethyl-2-[3,4-bis(pentadecyloxy)phenyl]imidazolium iodide salt has a multicontinuous Pm ?3m structure. To the best of our knowledge, this is the first example of a thermotropic cubic mesophase of this symmetry.     

Phenothiazine Scope: Steric Strain Induced Planarization and Excimer Formation

Phenothiazine derivatives based on the 10‐phenyl‐10H‐phenothiazine ( NAS ) chromophore, namely 7‐phenyl‐7H‐benzo[c]phenothiazine ( NAS‐1 ) and 12‐phenyl‐12H‐benzo[a]phenothiazine ( NAS‐2 ), were designed and synthesized. NAS‐1 and NAS‐2 are constitutional isomers with different steric strains imposed on the phenothiazine core moiety. In solution, the more‐strained NAS‐2 possesses a bent structure and undergoes photoinduced structural planarization (PISP). In the crystal, despite the absence of PISP, bent NAS‐2 exhibits prominent excimer emission as well as emission mechanochromism, which is not observed in the planar‐like NAS and NAS‐1 . This unconventional observation results from the bent core structure facilitating π–π stacking of the peripheral naphthalene moieties. Two‐photon‐coupled depth‐dependent emission shows spectral differences between the surface and kernel of the NAS‐2 crystal, and is believed to be a general phenomenon, at least in part, for materials exhibiting emission mechanochromism.     

Fluorescence Confocal Polarizing Microscopy of a Fluorescent Bent‐Core Liquid Crystal Exhibiting Polarization Splay Modulated (B7) Structures and Defects

The B7 phases of bent‐core molecules are polarization splay modulated fluid smectics that exhibit an unusually complex variety of exotic macroscopic structures, textures, and defects visible in polarized light microscopy. Herein we describe optical studies of these structures using fluorescence confocal polarizing microscopy (FCPM) and depolarized transmission optical microscopy to probe their organization in three dimensions. These experiments utilize recently reported fluorescent bent‐core molecules designed to give strong polarized fluorescence. This new bent‐core molecular family provides the means for probing a variety of bent‐core phases and structures by using FCPM and multiphoton fluorescence nonlinear imaging techniques. Comparative textural analysis of the B7 structures obtained using different types of imaging and the corresponding structural models are discussed.     

Dicationic imidazolium ionic liquid modified silica as a novel reversed‐phase/anion‐exchange mixed‐mode stationary phase for high‐performance liquid chromatography

A dicationic imidazolium ionic liquid modified silica stationary phase was prepared and evaluated by reversed‐phase/anion‐exchange mixed‐mode chromatography. Model compounds (polycyclic aromatic hydrocarbons and anilines) were separated well on the column by reversed‐phase chromatography; inorganic anions (bromate, bromide, nitrate, iodide, and thiocyanate), and organic anions (p‐aminobenzoic acid, p‐anilinesulfonic acid, sodium benzoate, pathalic acid, and salicylic acid) were also separated individually by anion‐exchange chromatography. Based on the multiple sites of the stationary phase, the column could separate 14 solutes containing the above series of analytes in one run. The dicationic imidazolium ionic liquid modified silica can interact with hydrophobic analytes by the hydrophobic C₆ chain; it can enhance selectivity to aromatic compounds by imidazolium groups; and it also provided anion‐exchange and electrostatic interactions with ionic solutes. Compared with a monocationic ionic liquid functionalized stationary phase, the new stationary phase represented enhanced selectivity owing to more interaction sites.     

Ionic Liquid Crystals Formed by Self‐Assembly around an Anionic Anthracene Core

We have designed and synthesised a series of modular, mesogenic complexes based on anthracene‐2,6‐disulfonate and trialkoxybenzyl‐functionalised imidazolium cations. Each complex contains a central, rigid, dianionic anthracene core and two flexible monocations bearing paraffin chains anchored on imidazolium rings. Anthracene‐2,6‐disulfonate can be crystallised with various simple alkylammonium ions and, in the case of ⁺N(CH₃)₂(C₁₆H₃₃)₂, a crystal structure determination has shown that the long paraffinic chains are intercalated between the anthracene moieties. The dianion forms columnar mesophases with trialkoxybenzylimidazolium cations, as identified by polarising optical microscopy and X‐ray scattering measurements. Differential scanning calorimetry studies confirmed mesomorphic behaviour from room temperature to about 200 °C for alkyl chains containing 8, 12 and 16 carbon atoms. The strong luminescence of anthracene is maintained in the mesophase and fluorescence measurements confirmed the presence of J aggregates in all cases. The new functional materials described herein provide an easy access to stable and luminescent mesomorphic materials engineered by an ionic self‐assembly process.     

A new class of bent‐shaped mesogens exhibiting unusual mesophase behaviour

Examples of a new class of bent‐core compounds are presented, the central fragment of which consists of a benzoyl derivative of a secondary cyclic amine. The mesophase behaviour has been studied by differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction and electro‐optical measurements. It was found that the five‐ring compounds form smectic CP or B₁ phases which are typical for bent‐core mesogens. The six‐ring compounds exhibit, in some cases, only conventional non‐polar smectic phases; in other cases non‐polar smectic phases as well as banana phases are seen. Of particular interest is the occurrence of a switchable uniaxial semectic A‐like phase with an antiferroelectric structure.     

Novel (N‐heterocyclic carbene)Pd(pyridine)Br2 complexes for carbonylative Sonogashira coupling reactions: Catalytic efficiency and scope for arylalkynes,alkylalkynes and dialkynes

New N,N′‐substituted imidazolium salts and their corresponding dibromidopyridine–palladium(II) complexes were successfully synthesized and characterized. Reactions of palladium bromide with the newly synthesized N,N′‐substituted imidazolium bromides ( 2a and 2b ) in pyridine afforded the corresponding new N‐heterocyclic carbene pyridine palladium(II) complexes ( 3a and 3b ) in high yields. Their single‐crystal X‐ray structures show a distorted square planar geometry with the carbene and pyridine ligands in trans position. Both complexes show a high catalytic activity in carbonylative Sonogashira coupling reactions of aryl iodides and aryl diiodides with arylalkynes, alkylalkynes and dialkynes.     

Microwave Synthesis of Fused Pyrans by Humic Acid Supported Ionic Liquid Catalyst and Their Antimicrobial,Antioxidant, Toxicity Assessment,and Molecular Docking Studies

A series of fused quinolinyl and quinolonyl pyrans were synthesized via a one‐pot reaction of quinolinyl and quinolonyl carbaldehydes, malononitrile, and a 1,3‐diketone. The reactions were catalyzed by a new humic acid supported 1‐butyl‐3‐methyl imidazolium thiocyanate ionic liquid under microwave irradiation conditions. Antimicrobial, antioxidant, and toxicity studies displayed various biological activities depending on structure of the pyrans.     

Flexible,dicationic imidazolium salts for in situ application in palladium‐catalysed Mizoroki–Heck coupling of acrylates under aerobic conditions

The synthesis, characterization and in situ catalytic performance of new unsymmetric N,N′‐disubstituted imidazolium‐based dicationic salts in Mizoroki–Heck coupling of acrylates with aryl bromides under aerobic conditions are described. A series of flexible dicationic salts with varying steric and electronic properties were synthesized in good to excellent yields. All the salts were well characterized using spectroscopic techniques. X‐ray diffraction analysis of two salts with the same dicationic backbone and different counter anions shows that the ligand adopts two different conformations which are influenced by the nature of the anion. Thus, the ligand is capable of changing its conformation according to the change in environment due to its flexible nature. All the synthesized imidazolium salts were found to be active in in situ palladium‐catalysed Mizoroki–Heck coupling under aerobic conditions. Amongst the salts, the hydroxyl‐functionalized imidazolium salt, incorporating the features of both bidentate chelating O,O ligand and carbene, shows the maximum catalytic activity. A variety of aryl and heteroaryl methyl and ethyl cinnamates were synthesized using these imidazolium salts as preligands. In addition, NMR studies confirm in situ generation of normal N‐heterocyclic carbenes from the C‐2 position of imidazol‐2‐ylidene ring. The mercury poisoning test was also performed to ascertain the nature of catalytically active palladium species. Aerobic conditions, low catalytic loading (0.5 mol%), shorter reaction times, broad functional group tolerance and good to excellent isolated yields are some of the significant features of the novel catalytic systems described here. Copyright © 2016 John Wiley & Sons, Ltd.     

Periodic imidazolium‐bridged hybrid monolith for high‐efficiency capillary liquid chromatography with enhanced selectivity

A novel periodic imidazolium‐bridged hybrid monolithic column was developed. With diene imidazolium ionic liquid 1‐allyl‐3‐vinylimidazolium bromide as both cross‐linker and organic functionalized reagent, a new periodic imidazolium‐bridged hybrid monolithic column was facilely prepared in capillary with homogeneously distributed cationic imidazolium by a one‐step free‐radical polymerization with polyhedral oligomeric silsesquioxane methacryl substituted. The successful preparation of the new column was verified by Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, and surface area analysis. Most interestingly, the bonded amount of 1‐allyl‐3‐vinylimidazolium bromide of the new column is three times higher than that of the conventional imidazolium‐embedded hybrid monolithic column and the specific surface area of the column reached 478 m²/g. The new column exhibited high stability, excellent separation efficiency, and enhanced separation selectivity. The column efficiency reached 151 000 plates/m for alkylbenzenes. Furthermore, the new column was successfully used for separation of highly polar nucleosides and nucleic acid bases with pure water as mobile phase and even bovine serum albumin tryptic digest. All these results demonstrate the periodic imidazolium‐bridged hybrid monolithic column is a good separation media and can be used for chromatographic separation of small molecules and complex biological samples with high efficiency.     

Hierarchical Superstructures with Control of Helicity from the Self‐Assembly of Chiral Bent‐Core Molecules

Herein, two asymmetric chiral bent‐core molecules, 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1R)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7R) and 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1S)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7S), were synthesized to demonstrate control of the helicity of their self‐assembled hierarchical superstructures. Mirror‐imaged CD spectra showed a split‐type Cotton effect after the formation of self‐assembled aggregates of BC7R and BC7S, thereby suggesting the formation of intermolecular exciton couplets with opposite optical activities. Both twisted and helical ribbons with preferential helicity that corresponded to the twisting character of the intermolecular exciton couplet were found in the aggregates. The formation of helical ribbons was attributed to the merging of twisted ribbons through an increase in width to improve morphological stability. As a result, control of the helicity of hierarchical superstructures from the self‐assembly of bent‐core molecules could be achieved by taking advantage of the transfer of chiral information from the molecular level onto the hierarchical scale.     

Photo and electrically switchable behavior of azobenzene containing pendant bent‐core liquid crystalline polymers

New class of photo and electrically switchable azobenzene containing pendant bent‐core liquid crystalline monomers ( AZBM 1, 2 , and 3 ) and their polymers ( AZBP 1, 2 , and 3 ) are reported. The synthesized precursors, monomers, and polymers were characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopy. Thermal stability of polymers was examined by thermogravimetric analysis and revealed stable up to 260 °C. The mesophase transition of monomers and polymers are observed through polarized optical microscopy (POM) and further confirmed by differential scanning calorimetry (DSC). The electrically switching property of monomers and their polymers were studied by electro‐optical method. Among the three monomers AZBM 1, 2 , and 3 , AZBM 1 and 2 exhibit antiferroelectric (AF) switching and AZBM 3 exhibits ferroelectric (F) switching behavior. On the other hand, low molecular weight polymers ( AZMP 1, 2 , and 3 ) show weak AF and F switching behavior. The photo‐switching properties of bent‐core azo polymers are investigated using UV‐vis spectroscopy, trans to cis isomerization occurs around 25 s for AZBP‐1 and 30 s for AZBP‐2 and 3 in chloroform, whereas reverse processes take place around 80 and 90 s. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,optical and electrochemical properties of arylenevinylene‐based π‐conjugated polymers with imidazolium units in the main chain

Arylenevinylene‐based π‐conjugated polymers containing imidazolium cationic units in the main chain and their model compounds were synthesized and characterized in terms of optical and electrochemical properties. 9,9‐Bisoctylfluorene, 2,5‐bisdodecyloxybenzene, and 3‐dodecylthiophene were introduced as arylene units with different donor characteristics to evaluate the effect on the highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap energy. The UV–vis and fluorescence spectra of cationic polymers and model compounds with iodide counter anion exhibited a significant blue shift with respect to the parent neutral molecules. X‐ray single crystal analysis for model compounds revealed that the effective π‐conjugation length of cationic model compounds decreased compared to the neutral model compounds by means of twisted conformation directed by CH‐π interactions between N‐methyl groups of imidazolium and neighboring aryl units. The cyclic voltammetry measurement suggested the negative shift of LUMO levels by the conversion of imidazole to imidazolium, indicating the electron‐accepting characteristics of cationic imidazolium unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Quaternary Chiral β2,2‐Amino Acids with Pyridinium and Imidazolium Substituents

The reactions of cyclic sulfamidates as electrophiles with a variety of nitrogen‐containing aromatic heterocycle nucleophiles, such as pyridines, N‐alkylimidazoles and N‐methylbenzimidazol, was explored. In all cases, although the nucleophilic substitution reactions occurred on quaternary centres, elimination products were not detected. The inversion of configuration at this quaternary centre was determined by X‐ray diffraction analysis and the enantiomeric excess of the reactions was checked by chiral HPLC. This synthetic approach allowed us to obtain a new family of chiral charged β^2,2‐amino acids, including a new bisamino acid that incorporates an imidazolium salt as a cross‐linker. In this context, the treatment of these chiral imidazolium salts with Ag₂O opens the way to new chiral N‐heterocyclic carbenes, which are important substrates in the fields of organometallic and organocatalytic chemistry. Additionally, we have done a thorough conformational analysis of these β‐amino acid derivatives, both in the solid state and in solution. The most important conformational feature of these acyclic systems is the rigidity of the N‐CH₂‐C‐N⁺ dihedral angle, which is essentially due to the gauche effect.     

Revelation from the Reaction of 1,4‐Diazabutadiene with Perchloric Acid: An Approach to the Synthesis of Imidazolium Perchlorates

The reactions of 1,4‐diazabutadienes 1 with HClO₄ were studied in detail. The final products obtained were not the hydroperchlorates of 1 but imidazolium perchlorates 2 or 3 . A possible reaction process is postulated on the basis of the isolation of the intermediate 2‐iminomethylimidazolium salt 4 . The factors influencing the conversion of 4 to the imidazolium perchlorates 2 and 3 were discussed with regard to the electronic and steric effects of the N‐substituents. This reaction can serve as an approach for the synthesis of imidazolium derivatives.     

Borohydride Ionic Liquids as Hypergolic Fuels: A Quest for Improved Stability

Hydrazine and its derivatives are used as fuels in rocket propellant systems; however, due to high vapor pressure, toxicity, and carcinogenicity, handling of such compounds is extremely hazardous. Hypergolic ionic liquids have shown great promise to become viable replacements for hydrazines as fuels. Borohydride‐containing ionic liquids have now been synthesized using a more efficient synthetic pathway that does not require liquid ammonia and halide precursors. Among the eight new compounds, 1‐allyl‐3‐n‐butyl‐imidazolium borohydride ( 1 ) and 1, 3‐diallylimidazolium borohydride ( 5 ) exhibit very short ignition‐delay times (ID) of 8 and 3 ms, respectively. The hydrolytic stability of borohydride compounds has been greatly improved by attaching long‐chain alkyl substituents to the imidazole ring. 1,3‐Di‐(n‐octyl)‐imidazolium borohydride ( 3 ) is a water stable borohydride‐containing ionic liquid. 1,3‐Di‐(n‐butyl)‐imidazolium borohydride ( 2 ) is a unique example of a borohydride liquid crystal. These ionic liquids have some unusual advantages, including negligible vapor pressures, good ignition delay (ID) times, and reduced synthetic and storage costs, thereby showing good application potential as environmentally friendly fuels in bipropellant formulations. In addition, they also have potential applications in the form of reducing agents and hydrogen storage materials.