Molecular weight distribution in radiation-induced polymerization. I. γ-radiation-induced free-radical polymerization of liquid styrene

The kinetics of γ-radiation-induced free-radical polymerization of styrene were studied over the temperature range 0–50°C at radiation intensities of 9.5 × 10⁴, 3.1 × 10⁵, 4.0 × 10⁵, and 1.0 × 10⁶ rad/hr. The overall rate of polymerization was found to be proportional to the 0.44–0.49 power of radiation intensity, and the overall activation energy for the radiation-induced free-radical polymerization of styrene was 6.0–6.3 kcal/mole. Values of the kinetic constants, k_p²/k_t and k_trm/k_p, were calculated from the overall polymerization rates and the number-average molecular weights. Gelpermeation chromatography was used to determine the number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the polydispersity ratio M?_w/M?_n, of the product polystyrene. The polydispersity ratios of the radiation-polymerized polystyrene were found to lie between 1.80 and 2.00. Significant differences were observed in the polydispersity ratios of chemically initiated and radiation-induced polystyrenes. The radiation chemical yield, G(styrene), was calculated to be 0.5–0.8.     

Synthesis and characterization of polymers and copolymers of vinylruthenocene

Homopolymers of vinylruthenocene and its copolymers with methyl acrylate, styrene, and n-vinylpyrrolidinone have been prepared by free-radical polymerization. No evidence for the electron transfer termination mechanism postulated for polymerization of vinylferrocene was observed. Yields of soluble polymers were 40–90% with M _w (4–25) × 10³ and M _w/M _n = 3.0–13.2. TGA analysis showed little weight loss up to 300°C but rapid decomposition above 300°C. Polyvinylruthenocene is a highly brittle material with T_g above 250°C. Torsional braid analysis of the copolymer samples showed T_g in the range 90–130°C which in some samples increased upon cooling and reheating. Several samples showed weak thermal transitions occurring prior to or following T_g. The rise in T_g upon cooling and reheating is indicative of possible decomposition, crosslinking, or realignment of the polymer chains.     

Polymerization of methyl methacrylate initiated by Mn(III)–glycerol redox system

The kinetics of thermal polymerization of methyl methacrylate initiated by the redox system Mn(III)–glycerol was studied in aqueous sulfuric acid in the temperature range of 30–40°C, and the rates of polymerization, R_p, and Mn³⁺ disappearance, etc., were measured. The effect of certain water-miscible organic solvents and certain cationic and anionic surfactants on the rates of polymerization has been investigated. A mechanism involving the formation of a complex between Mn³⁺ and glycerol whose decomposition yields the initiating free radical with the polymerization being terminated by the metal ion has been suggested.     

Relevance of a prereaction for the in situ NMP of styrene using the C‐Phenyl‐N‐tert‐butylnitrone/2,2′‐azobis(isobutyronitrile) pair

In this article, we compare two routes for carrying out in situ nitroxide‐mediated polymerization of styrene using the C‐phenyl‐N‐tert‐butylnitrone (PBN)/2,2′‐azobis(isobutyronitrile) (AIBN) pair to identify the best one for an optimal control. One route consists in adding PBN to the radical polymerization of styrene, while the other approach deals with a prereaction between the nitrone and the free radical initiator prior to the addition of the monomer and the polymerization. The combination of ESR and kinetics studies allowed demonstrating that when the polymerization of styrene is initiated by AIBN in the presence of enough PBN at 110 °C, fast decomposition of AIBN is responsible for the accumulation of dead polymer chains at the early stages of the polymerization, in combination with controlled polystyrene chains. On the other hand, PBN acts as a terminating agent at 70 °C with the formation of a polystyrene end‐capped by an alkoxyamine, which is not labile at this temperature but that can be reactivated and chain‐extended by increasing the temperature. Finally, the radical polymerization of styrene is better controlled when the nitrone/initiator pair is prereacted at 85 °C for 4 h in toluene before styrene is added and polymerized at 110 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1085–1097, 2009     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Polymerization of N,N-Dimethylaminopropyl-Acrylamide Through Hydrogen Transfer Induced by the Propagation of the Polyacrolein Anion

The anionic polymerization of acrolein (AL) with N, N-dimethylamino-propylacrylamide (DMAPA) in the presence of water was investigated in tetrahydrofuran, benzene, and ethanol at 0°C in a nitrogen atmosphere. The resulting polymers were found to be essentially vinyl polymers with one DMAPA attached and an aldehyde side chain. From observations of the polymerization process by ¹H NMR, we find that polymerization was initiated by the hydroxyl anion formed in the thermodynamic equilibrium between the amine of DMAPA and water. The hydrogen transfer reaction of DMAPA was caused by the propagating poly-AL anion. On the other hand, the monomer reactivity ratios and the Q₂-e₂values of DMAPA were determined by the free-radical copolymerization of styrene (St, M₁) with DMAPA and AIBN as initiator.     

Controlled radical polymerization of styrene mediated by the C‐phenyl‐N‐tert‐butylnitrone/AIBN pair: Kinetics and electron spin resonance analysis

Kinetics of the free radical polymerization of styrene at 110 °C has been investigated in the presence of C‐phenyl‐N‐tert‐butylnitrone (PBN) and 2,2′‐azobis(isobutyronitrile) (AIBN) after prereaction in toluene at 85 °C. The effect of the prereaction time and the PBN/AIBN molar ratio on the in situ formation of nitroxides and alkoxyamines (at 85 °C), and ultimately on the control of the styrene polymerization at 110 °C, has been investigated. As a rule, the styrene radical polymerization is controlled, and the mechanism is one of the classical nitroxide‐mediated polymerization. Only one type of nitroxide (low‐molecular‐mass nitroxide) is formed whatever the prereaction conditions at 85 °C, and the equilibrium constant (K) between active and dormant species is 8.7 × 10^?10 mol L^?1 at 110 °C. At this temperature, the dissociation rate constant (k_d) is 3.7 × 10^?3 s^?1, the recombination rate constant (k_c) is 4.3 × 10⁶ L mol^?1 s^?1, whereas the activation energy (E_a,diss.), for the dissociation of the alkoxyamine at the chain‐end is ～125 kJ mol^?1. Importantly, the propagation rate at 110 °C, which does not change significantly with the prereaction time and the PBN/AIBN molar ratio at 85 °C, is higher than that for the thermal polymerization at 110 °C. This propagation rate directly depends on the equilibrium constant K and on the alkoxyamine and nitroxide concentrations, as well. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1219–1235, 2007     

Free-radical polymerization of vinyl ferrocene

The results of quantitative studies of the rates of free-radical polymerization of vinyl ferrocene indicate that the latter has polymerization characteristics similar to those of styrene. The rates of homopolymerization of these two monomers in benzene at 70°C. were measured with the use of azobisisobutyronitrile as catalyst. The rate constants (k = R_p/[M][I]^1/2) are k_VF = (1.1 ? 1.8) × 10^?4, k_STY = 1.65 × 10^?4. Small amounts of vinyl ferrocene and styrene have similar effects on the rates of polymerizations of methyl methacrylate and ethyl acrylate and on the molecular weights of the resulting polymer. Polystyrene and poly(vinyl ferrocene) with similar molecular weights are isolated from polymerizations carried out under identical conditions. The rates of copolymerization of vinyl ferrocene—methyl methacrylate, vinyl ferrocene—styrene, and styrene—methyl methacrylate were determined by following the disappearance of monomers by means of gas chromatographic analyses. The relative reactivity for vinyl ferrocene is slightly lower than that for styrene.     

Synthesis of poly(arylene ethylene) oligomeric hydroperoxides and their use as initiating agents of radical polymerization

The oxidation to hydroperoxide of poly(arylene ethylenes) (PAE) by oxygen carried out in solutions at 80–110°C. The effect of initiating additions and the nature of solvent relative to the content of hydroperoxide groups in oxidized PAE were investigated. The oxidation to hydroperoxides in PAE occurs at the methylene groups, and the synthesized hydroperoxides are secondary peroxides. The decomposition of PAE hydroperoxides in toluene and chlorobenzene at concentrations of 0.006–0.03 mole/l. for hydroperoxide in the presence and absence of N-phenyl-α-naphthylamine (PNA) was studied. The decomposition of one hydroperoxide has been studied in the presence of cobaltous and manganese resinates and of PNA in chlorobenzene at 30–50°C. The addition of PNA to a chlorobenzene solution of PAE hydroperoxide containing cobaltous or manganese resinate accelerates the hydroperoxide decomposition, reduces the activation energy, and changes the reaction order from the second-order to first-order. The synthesized hydroperoxides initiate the radical polymerization of styrene and methyl methacrylate. The initiating activity of one of the synthesized hydroperoxides of PAE for polymerization of styrene (60°C) in the presence and absence of activating addition of manganese resinate was also evaluated.     

Photopolymerization of methyl methacrylate in the presence of tertiary amines

The sensitization effect of tertiary amines on the photopolymerization of methyl methacrylate was studied. N,N-Dimethylbenzylamine, triethylamine, and N,N-dimethylaniline increased the rate of polymerization in this order, but pyridine did not show any effect. A free-radical mechanism was confirmed by the tacticity of polymer, the retarding effect of hydroquinone, and the copolymer composition with styrene. On the basis of the detailed kinetics of the sensitized polymerization and the ultraviolet spectra of the reaction mixtures, a sensitization mechanism is proposed, in which the excited monomer and the amine form a complex and generate an initiating radical.     

Effect of cobalt(III) 1-nitroso-2-naphtholate on free-radical polymerization to vinyl monomers

It has been shown that, at 70°C, cobalt(III) 1-nitroso-2-naphtholate inhibits the free-radical polymerization of styrene, methyl methacrylate, butyl methacrylate, and butyl acrylate. The induction period linearly increases with complex concentration. The polymerization of styrene (120°C) carried out in the presence of cobalt(III) 1-nitroso-2-naphtholate shows typical features of pseudoliving polymerization, namely, linear ln[M]₀/[M]-time and molecular mass-conversion plots. When the monomers are allowed to stand with a complex (7 × 10^?3 mol/l) and an initiator (5 × 10^?3 mol/l) for 1 day at 20°C, the ESR signal corresponding to the nitroxide radical appears. In the course of polymerization, the signal disappears, indicating the consecutive transformation of the cobalt(III) 1-nitroso-2-naphtholate radical into the macronitroxide adduct. Polystyrene samples isolated at various conversions initiate the secondary polymerization of styrene and its block copolymerization with methyl methacrylate.     

Polar,functionalized diene‐based materials. V. Free‐radical polymerization of 2‐[(N‐benzyl‐n‐methylamino)methyl]‐1,3‐butadiene and copolymerization with styrene

2‐[(N‐Benzyl‐N‐methylamino)methyl]‐1,3‐butadiene (BMAMBD), the first asymmetric tertiary amino‐containing diene‐based monomer, was synthesized by sulfone chemistry and a nickel‐catalyzed Grignard coupling reaction in high purity and good yield. The bulk and solution free‐radical polymerizations of this monomer were studied. Traditional bulk free‐radical polymerization kinetics were observed, giving polymers with 〈M_n〉 values of 21 × 10³ to 48 × 10³ g/mol (where M_n is the number‐average molecular weight) and polydispersity indices near 1.5. In solution polymerization, polymers with higher molecular weights were obtained in cyclohexane than in tetrahydrofuran (THF) because of the higher chain transfer to the solvent. The chain‐transfer constants calculated for cyclohexane and THF were 1.97 × 10^?3 and 5.77 × 10^?3, respectively. To further tailor polymer properties, we also completed copolymerization studies with styrene. Kinetic studies showed that BMAMBD incorporated into the polymer chain at a faster rate than styrene. With the Mayo–Lewis equation, the monomer reactivity ratios of BMAMBD and styrene at 75 °C were determined to be 2.6 ± 0.3 and 0.28 ± 0.02, respectively. Altering the composition of BMAMBD in the copolymer from 17 to 93% caused the glass‐transition temperature of the resulting copolymer to decrease from 64 to ?7 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3227–3238, 2001     

Kinetics of the Copolymerization of Methyl Vinyl Ketone and Acrylamide Initiated by the Adduct of Methyl Vinyl Ketone and Imidazole

N-(Butyl-3-one)imidazole acts as an initiating adduct which is formed in the anionic polymerization of methyl vinyl ketone (MVK) induced by imidazole (Im) and is directly formed from Im and the MVK monomer. The kinetics of the anionic homopolymerization of MVK and acrylamide (AAm) under argon in the presence of the adduct were investigated in tetrahydrofuran (THF). The rate of polymerization for the MVK system is expressed as R_p = k[Adduct] [MVK], where k = 3.1 × 10^?6 L/(mol·s)in THF at 30°C. The overall activation energy, E_a , was found to be 5.34 kcal/mol. The R_p for the AAm system is expressed as R_p = k[Adduct] [AAm], where k = 6.8 × 10^?6 L/(mol·s) in THF at 30°C, with E_a 7.78 kcal/mol. The mechanism of the polymerization induced by the initiator adduct is discussed on the basis of these results.     

Polymerization of styrene in N,N-dimethylformamide

The polymerization of styrene in N,N-dimethylformamide (DMF) at 60°C has been studied both in the presence and absence of 4,4′-azobis-4-cyanopentanoic acid (ACV). Rates of polymerization were measured dilatometrically and gravimetrically, and degrees of polymerization were determined viscometrically. There was some discrepancy in the values of the transfer constant to DMF, C_s, obtained by analysis of the results. The most reliable value appeared to be 9.8 × 10^?6, from experimental data obtained in the absence of added ACV.     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Preparation of poly-p-benzenesulfonamide

The poly-p-benzenesulfonamide (PBS) structure has been prepared by the transamidation of N¹,N¹-dimethylsufanilamide hydrochloride in a melt reaction at 180°C. The polymeric nature of the product is exhibited by brittle film formation and a glass transition temperature of 180–190°C. Infrared and NMR spectroscopy are consistent with the proposed structure. The number-average degree of polymerization was measured by NMR. The maximum degree of polymerization was 14. Failure to obtain an optimum molecular weight did not appear to be due to monomer purity. Increasing the reaction temperature from 180 to 220°C led to side reactions giving insoluble and infusible product. PBS underwent thermal decomposition near 310°C. The decomposition temperature is independent of molecular weight.     

Retardation of radical polymerization rate by phenoxy radical produced from T-butylperoxy phenylcarbonate

T-butylperoxy phenylcarbonate (BPPC) was prepared. Its decomposition rate constant in cumene is given by k_d = 2.39 × 10¹⁵ exp(?17,300/T), where T is the absolute temperature. When BPPC decomposes to polymerize styrene at 100°C, it produces 12% phenoxy radical to total primary radicals. The phenoxy radical hardly adds to styrene and reacts the other primary radicals and polymer radical. Thus it retards the rate of polymerization.     

Homogeneous Solution Reverse Atom Transfer Radical Polymerization of Methyl Methacrylate

A homogeneous reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out in N, N-dimethylformamide(DMF) (25%, v/v) at 69°C, using an initiating system azobisisobutyronitrile (AIBN)/CuBr₂/N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA). The kinetics of homogeneous solution polymerizations showed linear first-order rate plots, indicating a constant number of growing species throughout the polymerization as well as a negligible contribution of termination or transfer reactions; a linear increase of the number-average molecular weight with conversion, and relatively low polydispersities, but low initiator efficiency. The dependence of the rate of polymerization on the concentrations of initiator, catalyst, ligand and temperature were presented.     

Living cationic polymerization of vinylnaphthalene derivatives

The living cationic polymerization of 6‐tert‐butoxy‐2‐vinylnaphthalene (tBOVN), a vinylnaphthalene derivative with an electron‐donating group, was achieved with a TiCl₄/SnCl₄ combined initiating system in the presence of ethyl acetate as an added base at –30 °C. The absence of side reactions at low temperature was confirmed by ¹H NMR analysis of the resulting polymer. In contrast to this controlled reaction at –30 °C, reactions performed at higher temperature, such as 0 °C, frequently involved unwanted intramolecular or intermolecular Friedel–Crafts reactions of naphthalene rings due to the high electron density of these rings. The cationic polymerization of 6‐acetoxy‐2‐vinylnaphthalene, a derivative with an acetoxy group, was also controlled under similar conditions, but chain transfer reactions were not completely suppressed during the polymerization of 2‐vinylnaphthalene. The glass transition temperature (T_g) of the obtained poly(tBOVN) was 157 °C, a value higher by 94 °C than that of the corresponding styrene derivative. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4828–4834     

Photopolymerisation of styrene initiated by triphenyl bismuthonium ylide

Photopolymerization of styrene initiated by tetraphenyl cyclopentadiene triphenyl bismuthonium ylide in dioxane was carried out in the presence of visible light (440 nm) at 30 ± 0.2°C for 55 h. The polymerization was inhibited by the presence of hydroquinone which is an evidence of the fact that polymerization takes place by radical mechanism. The system follows ideal radical kinetics (R_p ∝︁ [I]^0.5 [M]). The values of average degree of polymerization (P_n) decreases with the ylide. The mechanism of the reaction was elucidated by GPC and ESR techniques.