Estimation of distribution of vinyl groups in micron-sized monodisperse polymer microspheres by bromine titration method

The distribution of vinyl groups in polystyrene/poly(styrene-divinylbenzene) (PS/P(S-DVB)) composite microspheres produced by seeded copolymerization of S and DVB in the presence of 2.1-m monodisperse PS seed particles was estimated from the amount detected with bromine titration method as a function of the reaction time under various conditions.Part CXXIII of the series Studies on Suspension and Emulsion.     

Formation of monodisperse poly(1-methacryloxybenzotriazole) particles by radiation-induced dispersion polymerization

Radiation-induced dispersion polymerization of 1-methacryloxybenzotriazole (MABt) in ethyl propionate starts as homogeneous mixture and the resulting polymer precipitates as spherical particles. Formation, size, and shape of polymer particles are strongly dependent on the initial monomer concentration. Three regions can be distinguished: formation of deformed particles at concentrations of 15 w/v-% MABt; formation of spherical particles at concentrations from 18 to 35 w/v-% MABt; no precipitation of polymer at concentrations of 40 w/v-% MABt. The spherical particles at 20 w/v-% MABt had a diameter of 0.54 ± 0.31 m for 3 kGy irradiation and 2.93±0.68 m for 30 kGy. The number distribution of the microspheres shows that the spherical particles with small sizes formed at low irradiation dose (low conversion) disappears with increasing irradiation dose because of multi-coating by newly produced polymer.     

Preparation of micron-size monodisperse polymer particles having highly crosslinked structures and vinyl groups by seeded polymerization of divinylbenzene using the dynamic swelling method

Micron-size monodisperse polystyrene/polydivinylbenzene (PS/PDVB) composite particles having highly crosslinked structures and vinyl groups were prepared as follows. First, 1.9 m-size monodisperse PS seed particles produced by dispersion polymerization were dispersed in ethanol/water (70/30, w/w) solution which dissolved divinylbenzene (DVB) monomer, benzoyl peroxide as an initiator and poly(vinyl alcohol) as a stabilizer. The PS seed particles were swollen with a large amount of DVB monomers to 4.3 m in diameter while keeping good monodispersity by the dynamic swelling method, where water was slowly added, continuously, with a micro feeder into the dispersion. And then, the seeded polymerization of the absorbed DVB was carried out.Part CXXXV of the series Studies on Suspension and Emulsion     

Complex polarizability as used to analyze dielectric relaxation measurements

The effect of representing dielectric properties in terms of the complex polarizability ^c = – i is examined. Loss curves ( and tan ) are shifted towards higher frequencies, revealing the existence of new relaxations and allowing the clarifications of ones already known. We have calculated the shift ratios (at maximum or tan )/ (at maximum or tan ) from the more conventional empirical equations representing the dielectric behavior. Some examples are given.     

Electrokinetic study on concentrated suspensions using colloid vibration potential measurements

-potentials of a silica suspension and three types of polystyrene latex suspensions with different surface charge groups were measured, as a function of the particle concentration () in the suspension over a wide range, using the colloid vibration potential (CVP) technique. The concentration dependence of the-potential in silica suspension is explained well by Levine et al.s [1] cell model theory, verifying the applicability of the cell model to the CVP in silica suspension. However, the-potential of latex suspensions ordinarily decreases as the particle concentration increases, even after being corrected by the term of (1-). This tendency is especially noticeable in the systems that have particles with high surface charge densities. Furthermore, the conductivity measurements of these suspensions reveal that the conductivity of these systems, especially in their highly charged state, increases as the particle concentration is increased; opposite in tendency to silica suspensions. These new findings can be explained as follows: on the highly charged surface of a latex particle, a polyelectrolyte-like (hairy) layer is present, which overlaps at some point. This permits interparticle surface conduction and results in the abnormal behavior of CVP in these systems.     

Selective hydrogenation of fatty oils on alloyed Ni?Al catalyst. I. Kinetic model

On the basis of literature data concerning the reaction mechanism, a kinetic model for the selective hydrogenation of cotton-seed oil on the S-3 commercial alloyed Ni–Al catalyst is suggested. Its parameters have been identified according to the experimental data obtained in an agitated slurry reactor at T=140–200°C and P=0.2–0.8 MPa.

---

, C-3. , , t=140–120°C, P=0.2–0.8 .

     

Shear-induced deformation of polystyrene coils in dilute solution from small angle neutron scattering 2. Variation of shear gradient,molecular mass and solvent viscosity

The technique of small angle neutron scattering (SANS) has been used to study the conformation of polystyrene chains in dilute solution under a constant shear gradient. The experiments reveal a distinct anisotropy of the molecular dimensions with regard to the directions parallel and perpendicular to the flow direction on the 2D-multidetector. The deformation ratio of the single polymer chain (R ²/R _iso ² )–1 as a function of the reduced shear gradient=([] · · M _w G)/RT shows a transition from the ideal ²-behaviour for dynamic infinitely flexible coils found at small gradients, to a behaviour with smaller increase at larger. These results are qualitatively consistent with the theory of Cerf for a polymer with finite internal viscosity in a shear gradient. At low(<1), a better agreement with the model of a free-draining coil (Rouse behaviour) than with the Zimm model is observed.     

The acceleration of decomposition of potassium persulfate in the presence of sodium dodecyl sulfate and polymer particles as a model of emulsion polymerization system

The decomposition rates of potassium persulfate (KPS) in aqueous solutions containing sodium dodecyl sulfate (SDS) in the presence of polystyrene or poly(methyl methacrylate) particles as models of emulsion polymerization systems were measured by isotachophoresis. Free SDS molecules dispersed in the monomolecular state had an ability to accelerate the KPS decomposition, but SDS molecules adsorbed onto the polymer particles did not accelerate it.Part CXX of the series of Studies on Suspension and Emulsion     

Determination of liquid adsorption and desorption on and from solids by means of the derivatograph

This paper presents a method for calculation of the adsorption and immersion heats of water on a silica gel surface from the DTA curve obtained with a modified derivatograph. The adsorption and desorption heats have also been determined. The relationship between the adsorption heat and the amount of water adsorbed is presented.

---

Zusammenfassung Eine Methode zur Berechnung der Adsorptions- und Immersionswärmen von Wasser an Silikagel aus den mit einem modifizierten Derivatographen gemessenen DTA-Kurven wird beschrieben. Adsorptions- und Desorptionswärmen wurden bestimmt. Die Beziehung zwischen der Adsorptionswärme und der Menge des adsorbierten Wassers wird angegeben.

---

, , . . .

     

An investigation of micro-brownian motions in polydimethylsiloxane by complementary incoherent-neutron-scattering and nuclear-magnetic-resonance experiments below room temperature

Two different experimental methods, neutron scattering and nuclear magnetic resonance are used to investigate the random methyl group and segmental rotational jump motions in polydimethylsiloxane. It is shown that nuclear magnetic relaxation and line width experiments are complementary to incoherent neutron scattering fixed-window experiments, the principle of the fixed-window experiments being discussed in somewhat detail. Satisfactory agreement of these experimental techniques is achieved as to the determination of the two model parameters of the motional processes in question, i. e. the activation energy and the preexponential factor of the Arrhenius ansatz made for the correlation time or jump time, respectively.Contribution partly presented during the meeting of the Macromolecular Club, June 8–10, 1983 in Uppsala, the spring conference of the Deutsche Physikalische Gesellschaft, March 12–17, 1984 in Münster and the Fourth International Seminar on Polymer Physics, October 22–26, 1984 in Eyba (GDR).     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Effect of zeolite support on catalytic activity of Nio clusters

Zeolite Y, partially dealuminated under hydrothermal conditions, is used as a support for nickel clusters. The effect of the zeolite structure and of the means of applying the Ni²⁺ cations on the reactivity of dispersed nickel in CO methanation has been studied. The highest conversion was obtained on samples with developed secondary porosity, impregnated with the nickel ammine complex, [Ni(H₂O)₂ (NH₃)₄]Cl₂. The data obtained are discussed from the point of view of the effect of secondary porosity and the means of introducing the parent Ni²⁺ ions on the localization and thermal stability of Ni^o clusters.

---

. Ni²⁺ Ni^o CO. , Ni, [Ni(H₂O)₂(NH₃)₄]Cl₂. , .

     

Fossil age determination by thermal analysis

Subsequent to a comparative examination of recent bone material the author has recently completed the paleobiogeochemical evaluation of classical Quaternary and Pliocene terrestrial fossils of vertebrata from Hungary. A derivatograph (MOM) has been used to determine two thermoanalytical parameters which are closely associated with the passage of geological time: the total bound organic-matter content of the fossil and the fossilization cofficient.Derivatographic measurement of the organic matter in the bones is supplemented by fine-structure analysis of bone-tissue slides.Sample material of unknown age from several provenances was evaluated with the new dating method. The importance of the procedure is even greater in cases when only indefinite sporadic finds can be obtained from the sediments.

---

Zusammenfassung Nach einer vergleichenden Untersuchung an neuzeitlichem Knochenmaterial hat der Autor kürzlich die paleobiogeochemische Auswertung der klassischen Quaternären und Pliocenen terrestren Fossilien von Vertebraten aus Ungarn ergänzt.Ein Derivatograph (MOM) wurde zur Bestimmung zweier thermoanalytischer Parameter eingesetzt, die eng mit dem Fortschreiten der geologischen Zeit verbunden waren: dem Gesamtgehalt an gebundenem organischem Material und dem Fossilisationskoeffizienten.Die derivatographische Messung der organischen Substanz in den Knochen wurde durch die Feinstrukturanalyse von Knochengewebeschnitten ergänzt.Probenmaterial unbekannten Alters verschiedener Herkunft wurde mit der neuen Methode ausgewertet. Die Bedeutung des Verfahrens ist in den Fällen noch grösser, wenn aus den Sedimenten nur unbestimmte sporadische Funde erhalten werden können.

---

, . (MOM) , : . - . . , .

---

---

The author wishes to thank the staff of the Department of Experimental Physics of L. Kossuth University for the neutron activation measurements and the Computer Center of the University for the calculation work.     

SAXS study of core-shell colloids

Polymeric core-shell systems were produced by a two-stage emulsion polymerization technique under fixed conditions: i) monodisperse seed latex with a sufficiently high particle number; ii) starved monomer-II addition; iii) water-soluble initiator; iv) incompatibility of core and shell polymer. From electron micrographs, it is not possible to determine where the second polymer is located within these two-stage emulsion polymers. The internal structure of the particles can be detected by small-angle x-ray scattering. The results indicate that; i) the emulsion polymerization process takes place in a small surface layer region of the seed particles, and ii) a small interfacial layer exists between the core and shell polymer.Part 6 of Polymerizations in the Presence of Seeds     

Triterpene glycosides ofPatrinia scabiosofolia; II

Conclusions The triterpene glycosides scabiosides D, E, F, and G have been isolated from the roots ofPatrinia scabiosofolia Fisch. et Link. It has been established that scabioside D is O--D-glucopyranosyl-(1 4)-O--L-arabopyranosyl-(1 3)-O-oleanoloyl-(28 1)--D-xylopyranose, and scabioside E is O--D-glucopyranosyl-(1 4)-O--L-arabopyranosyl-(1 3)-O-oleanoloyl-(28 1)-O--D-xylopyranosyl-(4 1)--L-rhamnopyranose.     

Large deformation in filled networks of different architecture and its interpretation in terms of the van der Waals network model

The first quasi-static stretch of the two limiting systems of filler loaded rubber have been investigated. One of them is found by filler to matrix contacts only, the other by crosslinking permanently the matrix. In this case filler-matrix contacts are made by adhesion. The experimental results were described in terms of an extended van der Waals approach. It is illuminated that different filler to matrix contact (permanent bonds or adhesion) lead to different deformation mechanism, substantially affecting the reinforcement. Moreover, filler induced local field-modifications due to the boundary value problem can be understood with the Einstein-Smallwood approach independent of the kind of the filler to matrix contacts.     

Effect of the roughness factor on the surface oxidation of ruthenium catalysts

The surface oxidation of ruthenium catalysts with different roughness factor values has been analyzed. It is shown that electro formation of oxidized species on the exposed surface of ruthenium is strongly affected by the rougher characteristics of the surface. This effect has been explained through the addition and removal of protons to and from the oxidized species.

---

. , . .

     

Competition between crystallization and phase separation in polymer blends I. Diffusion controlled supermolecular structures and phase morphologies in poly(ɛ-caprolactone)/polystyrene blends

The type of supermolecular structure and the morphology in binary polymer blends with one crystallizable component and with a miscibility gap are strongly influenced by the relative rate of crystallization and demixing. Depending on the composition of the blend and on the relative position of the crystallization curve and the miscibility gap in the phase diagram, demixing-induced crystallization as well as crystallization-induced demixing can occur. Both these approaches lead to new and interesting structures. Additionally, the interaction of the two mentioned kinds of phase transition can under circumstances affect the growth rates of adjacent spherulites. This results in anisotropic concentration distribution or phase-separation morphology around their surfaces.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday.Presented at the Frühjahrstagung des FA Polymerphysik der DPG, Bad Nauheim, FRG, April 1990.     

X-ray diffraction studies on homologous thallium soaps below the temperature range of the neat phase 1. Calculation and comparison of the structure parameters of unit cells

The results of X-ray diffraction patterns of homologous thallium soaps TlC _n (n-8, 9, 10, 11, 12, 14, 15, 16, 17, 18, 20 and 22) in dependence on the temperature showed that the structures of the phases below the temperature range of the liquid-crystalline neat phase (so called phase C₁, phase C₂, phase I, phase II) are crystalline-like, not liquid-crystalline.As function of the chain length of the fatty acid group, we found the following phase sequences to be a function of temperature: TlC₈: phase Ineat phase: TlC₉–Tl₁₄: phase C₂phase IIphase Ineat phase; TlC₁₅, TlC₁₆: phase C₁phase IIphase Ineat phase; TlC₁₇–TlC₂₂: phase C₁phase IIneat phase.From the X-ray patterns of the thallium soaps were calculated the lattice parameters and the unit cells of these homologues at various temperatures. The comparison between the lattice parameters of the homologues showed, surprisingly, that these parameters were independent of chain length and temperature. This X-ray data are the basis for the following development of structure models of the phase C₁, phase C₂, phase I, and phase II, including the neat phase (see Part 2).     

Reduction of CuO-containing catalysts: CuO/ZnO

CO reduction of CuO in CuO/ZnO samples at 423 K isnot retarded by the support and occurs with no evidence of Cu₂O formation as reported (Porta et al. 1989). The positive order with regard to CO concentration varies with the precise range of CO partial pressure.

---

CuO CO CuO/ZnO 423 Cu₂O , (Porta etal Solid State Ionics 32–33, 1019, (1989)). CO CO.