Incorporation and exclusion of long chain alkyl halides in fatty acid monolayers at the air-water interface

Mixed monolayers of deuterated palmitic acid C(15)D(31)COOH (dPA) and deuterated stearic acid C(17)D(35)COOH (dSA) with 1-bromoalkanes of different alkyl chain length (C(4) to C(16)) at the air-water interface were investigated. Alkanes and 1-chlorohexadecane ClC(16)H(33) (ClHex) were also studied to compare the effects of the halogen on the mixed monolayers. Surface pressure-area isotherms and Brewster angle microscopy (BAM) were used to obtain the organization and phase behavior, providing a macroscopic view of the mixed monolayers. A molecular-level understanding of the interfacial molecular organization and intermolecular interactions was obtained by using vibrational sum frequency generation (SFG) spectroscopy and infrared reflection-absorption spectroscopy (IRRAS). It was found that from the alkyl halide molecules investigated 1-bromopentadecane, BrC(15)H(31) (BrPent), 1-bromohexadecane, BrC(16)H(33) (BrHex), and ClHex incorporate into the fatty acid monolayers. Alkanes of 15- and 16-carbon chain length do not incorporate into the fatty acid monolayer, which suggests that the halogen is needed for incorporation. Isotherms and spectra suggest that BrHex molecules are squeezed out, or excluded, from the fatty acid monolayer as the surface pressure is increased, while BAM images confirm this. Additionally, SFG spectra reveal that the alkyl chains of both fatty acids (dPA and dSA) retain an all-trans conformation after the incorporation of alkyl halide molecules. BAM images show that at low surface pressures BrHex does not affect the two-dimensional morphology of the dPA and dSA domains and that BrHex is miscible with dPA and dSA. We also present for the first time BAM images of BrHex deposited on a water surface, which reveal the formation of aggregates while the surface pressure remains unchanged from that of neat water.     

Dipolar control of monolayer morphology: spontaneous SAM patterning

A strategy for controlling relative placements of molecules within multicomponent monolayers at the solution-HOPG interface is demonstrated. The monolayers assemble from complementary pairs of 1,5-bis-alkyldiether-anthracenes bearing self-repelling side chains. Each diether side chain suffers repulsive dipolar interactions if it adsorbs next to an identical side chain in the morphology normally assumed by 1,5-bis-substituted-anthracene monolayers. Complementary side-chain pairs experience attractive dipolar interactions when adsorbed as neighbors in the normal morphology monolayer. The repulsive and attractive forces spontaneously drive formation of a patterned monolayer at the solution-HOPG interface. Each molecule adsorbs in its own row, sandwiched between two rows of the complementary anthracene. These studies demonstrate the viability of using weak dipolar interactions to control molecular placement and monolayer morphology and to pattern multicomponent monolayers.     

Scanning tunneling microscopy of prochiral anthracene derivatives on graphite: chain length effects on monolayer morphology

The morphology of monolayers formed upon adsorption of prochiral 1,5-substituted anthracene derivatives on highly oriented pyrolytic graphite is investigated using scanning tunneling microscopy at the liquid-solid interface. The adsorption orientation of these prochiral anthracene derivatives positions one of their enantiotopic faces in contact with the graphite. The molecules adsorb in rows with contact between adjacent anthracenes. The anthracene side chains extend perpendicular to the direction of the row repeat. All molecules within a single row adsorb via the same enantiotopic face. Anthracenes with side chains containing an even number of non-hydrogenic atoms (C, S) form monolayers in which molecules in adjacent rows adsorb via opposite enantiotopic faces. Anthracenes with side chains that contain an odd number of non-hydrogenic atoms form two-dimensional chiral domains in which all rows contain molecules adsorbed via the same enantiotopic face. This chain length effect on monolayer morphology represents a generalized example of structural effects previously observed in alkanoic acid monolayers formed on HOPG. The variation of the STM current with position in the vicinity of the anthracenes indicates that the highest occupied molecular orbital is the predominant mediator of tunneling for the aromatic group.     

ESR spin-label study of poly(styrene-co-methacrylic acid)/poly(epsilon-caprolactone) semi-interpenetrating polymer networks with controlled hydrogen-bond interactions

The morphology and miscibility of semi-interpenetrating polymer networks (semi-IPN) prepared with poly(styrene-co-methacrylic acid) [P(S-co-MAA)] of different carboxylic acid contents and poly(epsilon-caprolactone) (PCL) have been studied by ESR spin-label method. The ESR spectra of spin-labeled PCL showed one motional component at any specific temperature. It indicated that the spin-labeled molecules were located in one type of environment. The coexistence of two motional components in the ESR spectra of all semi-IPN samples was observed over a certain temperature range. This phenomenon suggested that the semi-IPNs were not compatible systems; they contained two microphases, a PCL-rich microdomain and a P(S-co-MAA)-rich microdomain. The miscibility could be improved by increasing the carboxylic acid content, which could enhance the hydrogen-bonding interactions between the ester groups of PCL and carboxylic acid groups in P(S-co-MAA). It was also found that the intracomponent cross-linking of the semi-IPNs was not in favor of the miscibility. The microphase separation occurred in all semi-IPNs, even in the samples having strong hydrogen-bonding interactions. With increasing cross-linking density, the microphase separation became more remarkable.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Enhanced lubricity in mixed alkanethiol monolayers

The frictional properties of two-component mixed alkanethiol monolayers were investigated with frictional force microscopy. With large chain length differences, the two types of molecules segregated into large islands and reveal similar frictional properties as those of single-component monolayers. With small chain length differences, the completely mixed monolayers display a decreased friction as compared with single-component monolayers. This observation indicates that development of gauche kinks in the top portion of the mixed monolayers can enhance lubrication rather than increase friction, perhaps due to suppression of other energy dissipation channels.     

Structure and reactivity of mixed omega-carboxyalkyl/alkyl monolayers on silicon: ATR-FTIR spectroscopy and contact angle titration

The structure, reactivity, and acid-base properties of mixed monolayers prepared by photochemical reaction of hydrogen-terminated silicon with mixtures of ethyl undecylenate and n-alkenes were studied by ATR-FTIR spectroscopy and contact-angle measurements. The surface composition of the mixed monolayers and its correlation with the hydrolysis reactivity of terminal ethoxycarbonyl (ester) groups were investigated by systematically varying the mole fraction of ethyl undecylenate and the chain length of the unsubstituted alkenes in the binary deposition solution. It has been shown that the mole fraction of ester groups on the surface deviates only slightly from the mole fraction of ethyl undecylenate in the solution. The efficiency of ester hydrolysis under acidic conditions is significantly influenced by the monolayer structure, i.e., the surface density of ester groups and length of the unsubstituted alkyl chains. In addition, we find that mixed omega-alkanoic acid/alkyl monolayers on silicon (prepared via hydrolysis) exhibit well-defined contact angle titration curves from which the surface acid dissociation constants were determined. The results were compared with the acid-base properties reported in the literature for carboxylic acid-terminated alkylsiloxane monolayers on hydroxylated silicon and for omega-mercaptoalkanoic acid/alkanethiolate monolayers on gold. The weak pKa dependence (deltapKa approximately 1) on the surface density of carboxylic acid groups and on the length of unsubstituted alkyl chains is attributed to variations of the microenvironment of the acid moieties. These experimental findings provide fundamental knowledge at the molecular level for the preparation of bioreactive surfaces of controlled reactivity on crystalline semiconductor substrates.     

Rings-on-a-string chain structure in DNA

Using fluorescence microscopy (FM), which permits the observation of single molecules, we found that a pearling structure is generated on a single long DNA molecule upon the addition of a gemini (dimeric) surfactant. This pearling structure was further investigated by performing atomic force microscopy measurements on the same DNA molecules as observed by FM. These observations revealed that the pearling structure is composed of many rings that are interconnected by elongated coil parts along a single DNA molecule, i.e., rings-on-a-string structure. The mechanism of the formation of such an intrachain segregated structure in terms of microphase separation on a single polyelectrolyte chain is discussed.     

Memory of surface patterns in mixed polymer brushes: simulation and experiment

The correlation between the morphology of mixed polymer brushes and fluctuations of the grafting points is investigated by single-chain-in-mean-field simulations and experiments. The local topography of two types of mixed polystyrene-polymethylmethacrylate (PS-PMMA) brushes that differ in their modes of attachment has been studied during repeated microphase separation into laterally structured and homogeneous morphologies upon changing solvents. In the first type of brush (conventional), each of the surface-attached initiator groups starts the growth of either a PS or a PMMA chain in a random fashion. In the second case (Y-shaped mixed brushes), two chains of different types are attached to the same anchor group on the substrate. Whereas in the first case statistical fluctuations of the chemical composition occur on a local scale, such composition fluctuations are strongly suppressed in the latter case. The microphase-separated morphology is similar in both cases, but Y-shaped brushes exhibit a significantly weaker domain memory than do conventional PS-PMMA mixed brushes. The results of the experiment are compared with simulations, and a simple phenomenological argument and qualitative agreement are found. The observations demonstrate that small fluctuations in the grafting points are amplified by the microphase separation and nucleate the location of the domains in the mixed brush.     

EFFECTS OF SOLVENT TREATMENT ON SURFACE MORPHOLOGY AND COMPOSITION OF POLY(METHYL METHACRYLATE)-g-POLY(ETHYLENE OXIDE)

Surface morphology and composition of solution-cast films of poly(methyl methacrylate)-g-poly(ethylene oxide)(PMMA-g-PEO) were investigated by using XPS, DSC, SEM and contact angle measurement. The microphase separatedstructure of the copolymers was studied by TEM. Generally, for the same graft copolymer, the surface content of PEO orhydrophilicity can be as follows: Surface treated with petroleum ether or cyclohexane>surface untreated with solvent>surface treated with water or ethyl alcohol. Graft copolymer having longer PEO side chains and higher PEO content shows aseparated PEO phase with even a certain degree of crystallinity on the surface. PEO crystallinity was destroyed by water orethyl alcohol treatment, however, surface treatment with petroleum ether or cyclohexane favors the growth of PEO crystal.TEM shows that graft copolymers with longer PEO side chains (M_n of PEO, 3200) may readily undergo microphase separation and the shape and size of domains depend on the copolymer's composition.     

Length-controlled rodlike self-assemblies in binary mixed langmuir-blodgett monolayers on mica

In this paper, atomic force microscopy (AFM) has been used to investigate the morphology of monolayers of the amphiphilic rod-coil diblock molecule (EO7OPV) containing oligo(phenylene vinylene) dimer (OPV) and poly(ethylene oxide) (PEO) as well as the morphology of mixed monolayers of EO7OPV and palmitic acid (PA) deposited onto mica by the Langmuir-Blodgett technique. At surface pressures higher than 3 mN/m, EO7OPV forms regular-shaped aggregates with a monomolecular layer structure, where the hydrophilic PEO blocks are adsorbed onto the mica substrate and the hydrophobic OPV blocks form an ordered crystalline OPV layer on the top of the PEO layer through the strong pi-pi stacking interaction. In the mixed LB monolayers of EO7OPV and PA, the phase separation occurs. At a certain mixed ratio, EO7OPV molecules form rodlike domains with regular shape and uniform size at surface pressures higher than 3 mN/m. With the increase of the molar fraction of PA, the rodlike domains consisting of EO7OPV are elongated. The length of the rodlike domains can be tuned easily in a large range by altering the molar ratio of EO7OPV and PA. In addition, the rodlike domains are oriented to specific directions, corresponding to the directions of the potassium ion array on the mica surface having 6-fold symmetry. We demonstrate the possible formation mechanism and the elongation origin of rodlike domains in mixed LB monolayers and propose the two-step formation process of oriented rodlike domains deposited onto the mica substrate.     

Pendant side‐chain sterics against electrostatic forces: Influencing short‐range ordering in random polyelectrolytes

The length of pendant side chains in charged, random, comb‐shaped polymers dictates the nature of their short‐range ordering. Random copolymers, and terpolymer, of 4‐vinylpyridine (4VP), styrene, and isoprene were synthesized and subsequently fully quaternized with 1‐alkylbromides having varying number of carbons on the alkyl group ranging from 2 to 8. Evaluation by wide angle X‐ray scattering revealed that dipole–dipole attraction facilitates the formation of ionomer cluster morphology in samples with two carbons on the pendant side chain, whereas for samples with four or more carbons on the pendant side chains, side‐chain sterics was dominant resulting in periodic backbone spacing. Copolymers with isoprene, having flexible backbones, favor the formation of ionomer cluster morphology while styrene copolymers having rigid backbones disfavor the formation of ionomer clusters. An “in‐line” dipole model was developed to predict the separation distance at which both ionomer cluster and backbone–backbone morphologies could coexist. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1325–1336     

J-aggregates in matrix stabilized two-dimensional azobenzene derivatives

A two-component film technique at the air-water interface has been used for fabricating matrix stabilized azobenzene J-aggregates. Langmuir monolayers of (E)-1-(3-chloro-4-(alkyloxy)phenyl)-2-phenyldiazene (CnCD, n=8,10,12) have been prepared with stearic acid (STA) as the two-dimensional matrix. Miscibility studies at a molecular level, explored from the monolayer pressure-area isotherms revealed a phase separation of the CnCD from the stearic acid matrix at a compression pressure of 10 mN/m. A 43-nm strong red shift in the 350 nm pi-pi * absorption feature implied formation of highly ordered J-aggregates of CnCDs in conformity with atomic force microscopy and micro-Raman spectral characteristics. While a one-component CnCD failed to form a 2D monolayer, the STA supported CnCD binary system crossed a mixed monolayer phase followed by compression, leading to the formation of matrix stabilized CnCD J-aggregates.     

Molecular modeling of the short-side-chain perfluorosulfonic acid membrane

Presented here is a first principles based molecular modeling investigation of the possible role of the side chain in effecting proton transfer in the short-side-chain perfluorosulfonic acid fuel cell membrane under minimal hydration conditions. Extensive searches for the global minimum energy structures of fragments of the polymer having two pendant side chains of distinct separation (with chemical formula: CF(3)CF(O(CF(2))(2)SO(3)H)(CF(2))(n)CF(O(CF(2))(2)SO(3)H)CF(3), where n = 5, 7, and 9) with and without explicit water molecules have shown that the side chain separation influences both the extent and nature of the hydrogen bonding between the terminal sulfonic acid groups and the number of water molecules required to transfer the proton to the water molecules of the first hydration shell. Specifically, we have found that fully optimized structures at the B3LYP/6-311G** level revealed that the number of water molecules needed to connect the sulfonic acid groups scaled as a function of the number of fluoromethylene groups in the backbone, with one, two, and three water molecules required to connect the sulfonic acid groups in fragments with n = 5, 7, and 9, respectively. With the addition of explicit water molecules to each of the polymeric fragments, we found that the minimum number of water molecules required to effect proton transfer also increases as the number of separating tetrafluoroethylene units in the backbone is increased. Furthermore, calculation of water binding energies on CP-corrected potential energy surfaces showed that the water molecules bound more strongly after proton dissociation had occurred from the terminal sulfonic acid groups independent of the degree of separation of the side chains. Our calculations provide a baseline for molecular results that can be used to assess the impact of changes of polymer chemistry on proton conduction, including the side chain length and acidic functional group.     

Mixed brushes consisting of oppositely charged Y-shaped polymers in salt free,monovalent, and divalent salt solutions

The conformation and the internal stratification of mixed brushes formed from oppositely charged Y(−) and Y(+)-shaped chains in salt free, monovalent, and divalent salt solutions were studied by means of molecular dynamics simulations using the primitive model. Scaling relations of mixed brush height with respect to the grafting surface per chain, the ratio of the total positive to the total negative charge of polyelectrolyte chains, and salt concentrations were obtained. The simulations predicted that mixed brushes show a unique response to divalent salt (1:2) solutions. For symmetric brushes having the same spacer lengths, number of chains and charged units fractions the increase of the salt concentration leads to the enrichment of the outer brush surface with Y(+) units and the lamella microphase separation. For asymmetric brushes in high salt concentration cylindrical domain microphases are formed.     

Fine structure and phase transition behavior of fluorinated comb copolymers

The fine structure in the solid state and phase transition behavior of newly synthesized comb copolymers having fluorocarbon and hydrocarbon side‐chains were investigated by temperature controlled wide angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). From the WAXD profiles, two kinds of short spacing peaks based on the formation of the subcell for fluorinated and hydrogenated side‐chains were confirmed at 5.0 and 4.1 Å, respectively. Furthermore, two kinds of endothermic peaks, which corresponded to melting peaks of both side‐chain crystals, appeared in heating process of the DSC thermograms. From these experimental findings, the phase separation structure having the independently packed immiscible side‐chain crystalline was formed in the whole polymer crystal. In addition, it was found that these comb polymers formed highly ordered (double) layer structure estimated using WAXD and small angle X‐ray scattering (SAXS). These fluorinated comb copolymers form a monolayer on the water surface and their transferred film with phase‐separated structure at nanometer size on solid. There were hydrogenated domains at 10–20 nm diameter scales in these phase separated surface structure of monolayers. From these experimental results, these copolymer monolayers are expected to be used as a new molecular device such as nanolithography based on the surface patterning of polymer nanomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 416–425, 2006     

Development of Experiment and Theory to Detect and Predict Ligand Phase Separation on Silver Nanoparticles

MALDI mass‐spectrometry measurements are combined with self‐consistent mean‐field (SCF) calculations to detect and predict ligand phase separation on Ag nanoparticles. The experimental and theoretical techniques complement each other by enabling quantification of the nearest‐neighbor distribution of a ligand mixture in a monolayer shell. By tracking a characteristic metallic fragment family, analysis of a MALDI spectrum produces a frequency distribution corresponding to specific ligand patterning. Inherent to the SCF calculation is the enumeration of local interactions that dictate ligand assembly. Interweaving MALDI and SCF facilitates a comparison between the experimentally and theoretically derived frequency distributions as well as their deviation from a well‐mixed state. Thus, we combine these techniques to detect and predict phase separation in monolayers that mix uniformly or experience varying degrees of de‐mixing, including microphase separation and stripe formation. Definition of MALDI removed as this is a commonly recognized technique.     

接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

 本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．     

接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．