Reactions of Li- and Yb-coordinated N,N'-bis(trimethylsilyl)-beta-diketiminates: one- and two-electron reductions, deprotonation, and C-N bond cleavage

The synthesis and characterisation of novel Li and Yb complexes is reported, in which the monoanionic beta-diketiminato ligand has been (i) reduced (SET or 2 [times] SET), (ii) deprotonated, or (iii) C-N bond-cleaved. Reduction of the lithium beta-diketiminate Li(L(R,R'))[L(R,R')= N(SiMe(3))C(R)CHC(R')N(SiMe(3))] with Li metal gave the dilithium derivative [Li(tmen)(mu-L(R,R'))Li(OEt(2))](R = R'= Ph; or, R = Ph, R[prime or minute]= Bu(t)). When excess of Li was used the dimeric trilithium [small beta]-diketiminate [Li(3)(L(R,R[prime or minute]))(tmen)](2)(, R = R'= C(6)H(4)Bu(t)-4 = Ar) was obtained. Similar reduction of [Yb(L(R,R'))(2)Cl] gave [Yb[(mu-L(R,R'))Li(thf)](2)](, R = R[prime or minute]= Ph; or, R = R'= C(6)H(4)Ph-4 = Dph). Use of the Yb-naphthalene complex instead of Li in the reaction with [Yb(L(Ph,Ph))(2)] led to the polynuclear Yb clusters [Yb(3)(L(Ph,Ph))(3)(thf)], [Yb(3)(L(Ph,Ph))(2)(dme)(2)], or [Yb(5)(L(Ph,Ph))(L(1))(L(2))(L(3))(thf)(4)] [L(1)= N(SiMe(3))C(Ph)CHC(Ph)N(SiMe(2)CH(2)), L(2)= NC(Ph)CHC(Ph)H, L(3)= N(SiMe(2)CH(2))] depending on the reaction conditions and stoichiometry. The structures of the crystalline complexes 4, 6x21/2(hexane), 5(C(6)D(6)), and have been determined by X-ray crystallography (and have been published).     

Five-coordinate Pd(II) orthometallated triarylphosphite complexes

The reaction of the orthopalladated triarylphosphite complexes [{Pd(mu-Cl){kappa(2)-P,C-P(OC(6)H(2)-2,4-R(2))(OC(6)H(3)-2,4-R(2))}(2)] (R = H, (t)Bu) with bis(2-diphenylphosphinoethyl)phenylphosphine leads to a five-coordinate palladium(II) (R = H) and a mixture containing four-and five-coordinate species (R = (t)Bu). The crystal structure of the five-coordinate species [Pd{kappa(2)-P,C-(P(OC(6)H(4))(OC(6)H(5))(2)}{bis(2-diphenylphosphinoethyl)phenylphosphine}][SbF(6)] is presented. This complex reacts with hydrogen peroxide or [AuCl(tht)] to give four-coordinate complexes in which the displaced phosphine residue is either oxidised or coordinated to gold chloride; this demonstrates that the five-coordinate complexes are labile in solution. By contrast, the reactions of the dimeric precursors with 1,1,1-tris(diphenylphosphinomethyl)ethane give four-coordinate complexes in the solid state, although evidence is presented that the smaller phosphite-containing system is five-coordinate at room temperature or higher in solution.     

Uranium (III) scorpionates: synthesis and structure of [(TpMe2)2U[N(C6H5)2]] and [(TpMe2)2U[N(SiMe3)2]

Reaction of [(Tp(Me)2)(2)UI] with KNR(2) (R = C(6)H(5), SiMe(3)) in tetrahydrofuran (THF) afforded the monomeric trivalent actinide amide complexes [(Tp(Me)2)(2)U[N(C(6)H(5))(2)]], 1, and [(Tp(Me)2)(2)U[N(SiMe(3))(2)]], 2. The complexes have been fully characterized by spectroscopic methods and their structures were confirmed by X-ray crystallographic studies. In the solid state 1 and 2 exhibit distorted pentagonal bipyramidal geometries. The U-NR(2) bond lengths in both complexes are the same but in complex 2 the greater steric demands of the N(SiMe(3))(2) ligand led to elongated U-N(pz) bonds, especially those opposite the amido ligand.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Solution structures and dynamic properties of chelated d(0) metal olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) (R = H, Me): Models for the [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" catalysts.

To model the Ti-olefin interaction in the putative [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" Ti-catalyzed olefin polymerization, chelated alkoxide olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) have been investigated. The reaction of [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(2) (1a,b; R = H, Me) with HOCMe(2)CH(2)CH(2)CH=CH(2) yields mixtures of [eta(5)-C(5)R(4)SiMe(2)NH(t)Bu]TiMe(2)(OCMe(2)CH(2)CH(2)CH=CH(2)) (2a,b) and [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(OCMe(2)CH(2)CH(2)CH=CH(2)) (3a,b). The reaction of 2a/3a and 2b/3b mixtures with B(C(6)F(5))(3) yields the chelated olefin complexes [[eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][MeB(C(6)F(5))(3)] (4a,b; 71 and 89% NMR yield). The reaction of 2b/3b with [Ph(3)C][B(C(6)F(5))(4)] yields [[eta(5): eta(1)-C(5)Me(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][B(C(6)F(5))(4)] (5b, 88% NMR yield). NMR studies establish that 4a,b and 5b exist as mixtures of diastereomers (isomer ratios: 4a/4a', 62/38; 4b/4b', 75/25; 5b/5b', 75/25), which differ in the enantioface of the olefin that is coordinated. NMR data for these d(0) metal olefin complexes show that the olefin coordinates to Ti in an unsymmetrical fashion primarily through C(term) such that the C=C pi bond is polarized with positive charge buildup on C(int). Dynamic NMR studies show that 4b/4b' undergoes olefin face exchange by a dissociative mechanism which is accompanied by fast inversion of configuration at Ti ("O-shift") in the olefin-dissociated intermediate. The activation parameters for the conversion of 4b to 4b' (i.e., 4b/4b' face exchange) are: DeltaH = 17.2(8) kcal/mol; DeltaS = 8(1) eu. 4a/4a' also undergoes olefin face exchange but with a lower barrier (DeltaH = 12.2(9) kcal/mol; DeltaS = -2(3) eu), for the conversion of 4a to 4a'.     

Synthesis, structure and catalytic activity of alkali metal-free bent-sandwiched lanthanide amido complexes with calix[4]-pyrrolyl ligands

Simple silylamine elimination reactions of calix[4]-pyrrole [R(2)C(C(4)H(2)NH)](4) (R = Me (1), {-(CH(2))(5)-}(0.5) (2)) with 2 equiv. of [(Me(3)Si)(2)N](3)Ln(μ-Cl)Li(THF)(3) (Ln = Nd, Sm, Dy) in reflux toluene, afforded the novel dinuclear alkali metal-free trivalent lanthanide amido complexes (η(5):η(1):η(5):η(1)-R(8)-calix[4]-pyrrolyl){LnN(SiMe(3))(2)}(2) (R = Me, Ln = Nd (3), Sm (4), Dy (5); R = {-(CH(2))(5)-}(0.5), Ln = Nd (6), Sm(7)). The complexes were fully characterized by elemental analyses, spectroscopic analyses and single-crystal X-ray analyses. X-ray diffraction studies showed that each lanthanide metal was supported by bispyrrolyl anions in an η(5) fashion and along with three nitrogen atoms from N(SiMe(3))(2) and two other pyrroyl rings in η(1) modes formed the novel bent-sandwiched lanthanide amido bridged trivalent lanthanide amido complexes, similar to ansa-cyclopentadienyl ligand-supported lanthanide amides with respect to each metal center. The catalytic activities of these organolanthanide complexes as single component l-lactide polymerization catalysts were studied.     

Octahedral Ru(II) amido complexes TpRu(L)(L')(NHR) (Tp = hydridotris(pyrazolyl)borate; L = L' = P(OMe)3 or PMe3 or L = CO and L' = PPh3; R = H,Ph, or tBu): synthesis,characterization, and reactions with weakly acidic C-H bonds

The octahedral Ru(II) amine complexes [TpRu(L)(L')(NH(2)R)][OTf] (L = L' = PMe(3), P(OMe)(3) or L = CO and L' = PPh(3); R = H or (t)Bu) have been synthesized and characterized. Deprotonation of the amine complexes [TpRu(L)(L')(NH(3))][OTf] or [TpRu(PMe(3))(2)(NH(2)(t)Bu)][OTf] yields the Ru(II) amido complexes TpRu(L)(L')(NH(2)) and TpRu(PMe(3))(2)(NH(t)Bu). Reactions of the parent amido complexes or TpRu(PMe(3))(2)(NH(t)Bu) with phenylacetylene at room temperature result in immediate deprotonation to form ruthenium-amine/phenylacetylide ion pairs, and heating a benzene solution of the [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] ion pair results in the formation of the Ru(II) phenylacetylide complex TpRu(PMe(3))(2)(C[triple bond]CPh) in >90% yield. The observation that [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] converts to the Ru(II) acetylide with good yield while heating the ion pairs [TpRu(L)(L')(NH(3))][PhC(2)] yields multiple products is attributed to reluctant dissociation of ammonia compared with the (t)butylamine ligand (i.e., different rates for acetylide/amine exchange). These results are consistent with ligand exchange reactions of Ru(II) amine complexes [TpRu(PMe(3))(2)(NH(2)R)][OTf] (R = H or (t)Bu) with acetonitrile. The previously reported phenyl amido complexes TpRuL(2)(NHPh) [L = PMe(3) or P(OMe)(3)] react with 10 equiv of phenylacetylene at elevated temperature to produce Ru(II) acetylide complexes TpRuL(2)(C[triple bond]CPh) in quantitative yields. Kinetic studies indicate that the reaction of TpRu(PMe(3))(2)(NHPh) with phenylacetylene occurs via a pathway that involves TpRu(PMe(3))(2)(OTf) or [TpRu(PMe(3))(2)(NH(2)Ph)][OTf] as catalyst. Reactions of 1,4-cyclohexadiene with the Ru(II) amido complexes TpRu(L)(L')(NH(2)) (L = L' = PMe(3) or L = CO and L' = PPh(3)) or TpRu(PMe(3))(2)(NH(t)Bu) at elevated temperatures result in the formation of benzene and Ru hydride complexes. TpRu(PMe(3))(2)(H), [Tp(PMe(3))(2)Ru[double bond]C[double bond]C(H)Ph][OTf], [Tp(PMe(3))(2)Ru=C(CH(2)Ph)[N(H)Ph]][OTf], and [TpRu(PMe(3))(3)][OTf] have been independently prepared and characterized. Results from solid-state X-ray diffraction studies of the complexes [TpRu(CO)(PPh(3))(NH(3))][OTf], [TpRu(PMe(3))(2)(NH(3))][OTf], and TpRu(CO)(PPh(3))(C[triple bond]CPh) are reported.     

Application of molybdenum bis(imido) complexes in ethylene dimerisation catalysis

In combination with EtAlCl(2) (Mo : Al = 1 : 15) the imido complexes [MoCl(2)(NR)(NR')(dme)] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (1); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (3); R = R' = Bu(t) (4); dme = 1,2-dimethoxyethane) and [Mo(NHBu(t))(2)(NR)(2)] (R = 2,6-Pr(i)(2)-C(6)H(3) (5); R = Bu(t) (6)) each show moderate TON, activity, and selectivity for the catalytic dimerisation of ethylene, which is influenced by the nature of the imido substituents. In contrast, the productivity of [MoCl(2)(NPh)(2)(dme)] (2) is low and polymerisation is favoured over dimerisation. Catalysis initiated by complexes 1-4 in combination with MeAlCl(2) (Mo : Al = 1 : 15) exhibits a significantly lower productivity. Reaction of complex 5 with EtAlCl(2) (2 equiv.) gives rise to a mixture of products, while addition of MeAlCl(2) affords [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. Treatment of 6 with RAlCl(2) (2 equiv.) (R = Me, Et) yields [Mo({μ-N-Bu(t)}AlCl(2))(2)] (7) in both cases. Imido derivatives 1 and 3 react with Me(3)Al and MeAlCl(2) to form the bimetallic complexes [MoMe(2)(N{R}AlMe(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (8); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (10)) and [MoMe(2)(N{R}AlCl(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (9); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (11)), respectively. Exposure of complex 8 to five equivalents of thf or PMe(3) affords the adducts [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)(L)] (L = thf (12); L = PMe(3) (13)), while reaction with NEt(3) (5 equiv.) yields [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. The molecular structures of complexes 5, 9 and 11 have been determined.     

Dinuclear Rh(II) pyrazolates as CVD precursors for rhodium thin films

New dinuclear rhodium(II) pyrazolate (Pz) complexes of formula Rh(2)(3-R,5-R'Pz)(4)·2L (R = R' = CF(3), L = H(2)O (1), CH(3)CN (2)) and Rh(2)(3-R,5-R'Pz)(4) (R = R' = (t)Bu (3); R = CF(3), R' = (t)Bu (4)) have been synthesized from the interaction of the lithium salt of the corresponding pyrazole with Rh(2)(OAc)(4) in diethyl ether. The complexes were characterized by X-ray crystallography and spectroscopic methods. They were further evaluated as precursors for the chemical vapor deposition (CVD) of Rh thin films using H(2) as the carrier gas. The resulting films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).     

Yttrium complexes incorporating the chelating diamides [ArN(CH2)xNAr]2- (Ar = C6H3-2,6-iPr2, x= 2, 3) and their unusual reaction with phenylsilane

Novel yttrium chelating diamide complexes [(Y[ArN(CH(2))(x)NAr](Z)(THF)(n))(y)] (Z = I, CH(SiMe(3))(2), CH(2)Ph, H, N(SiMe(3))(2), OC(6)H(3)-2,6-(t)Bu(2)-4-Me; x = 2, 3; n = 1 or 2; y = 1 or 2) were made via salt metathesis of the potassium diamides (x = 3 (3), x = 2 (4)) and yttrium triiodide in THF (5,10), followed by salt metathesis with the appropriate potassium salt (6-9, 11-13, 15) and further reaction with molecular hydrogen (14). 6 and 11(Z = CH(SiMe(3))(2), x = 2, 3) underwent unprecedented exchange of yttrium for silicon on reaction with phenylsilane to yield (Si[ArN(CH(2))(x)NAr]PhH) (x = 2 (16), 3) and (Si[CH(SiMe(3))(2)]PhH(2)).     

Synthesis,molecular structure,and C-C coupling reactions of carbeneruthenium(II) complexes with C5H5Ru(=CRR') and C5Me5Ru(=CRR') as molecular units

The ethene derivatives [(eta(5)-C(5)R(5))RuX(C(2)H(4))(PPh(3))] with R=H and Me, which have been prepared from the eta(3)-allylic compounds [(eta(5)-C(5)R(5))Ru(eta(3)-2-MeC(3)H(4))(PPh(3))] (1, 2) and acids HX under an ethene atmosphere, are excellent starting materials for the synthesis of a series of new halfsandwich-type ruthenium(II) complexes. The olefinic ligand is replaced not only by CO and pyridine, but also by internal and terminal alkynes to give (for X=Cl) alkyne, vinylidene, and allene compounds of the general composition [(eta(5)-C(5)R(5))RuCl(L)(PPh(3))] with L=C(2)(CO(2)Me)(2), Me(3)SiC(2)CO(2)Et, C=CHCO(2)R, and C(3)H(4). The allenylidene complex [(eta(5)-C(5)H(5))RuCl(=C=C=CPh(2))(PPh(3))] is directly accessible from 1 (R=H) in two steps with the propargylic alcohol HC triple bond CC(OH)Ph(2) as the precursor. The reactions of the ethene derivatives [(eta(5)-C(5)H(5))RuX(C(2)H(4))(PPh(3))] (X=Cl, CF(3)CO(2)) with diazo compounds RR'CN(2) yield the corresponding carbene complexes [(eta(5)-C(5)R(5))RuX(=CRR')(PPh(3))], while with ethyl diazoacetate (for X=Cl) the diethyl maleate compound [(eta(5)-C(5)H(5))RuCl[eta(2)-Z-C(2)H(2)(CO(2)Et)(2)](PPh(3))] is obtained. Halfsandwich-type ruthenium(II) complexes [(eta(5)-C(5)R(5))RuCl(=CHR')(PPh(3))] with secondary carbenes as ligands, as well as cationic species [(eta(5)-C(5)H(5))Ru(=CPh(2))(L)(PPh(3))]X with L=CO and CNtBu and X=AlCl(4) and PF(6), have also been prepared. The neutral compounds [(eta(5)-C(5)H(5))RuCl(=CRR')(PPh(3))] react with phenyllithium, methyllithium, and the vinyl Grignard reagent CH(2)=CHMgBr by displacement of the chloride and subsequent C-C coupling to generate halfsandwich-type ruthenium(II) complexes with eta(3)-benzyl, eta(3)-allyl, and substituted olefins as ligands. Protolytic cleavage of the metal-allylic bond in [(eta(5)-C(5)H(5))Ru(eta(3)-CH(2)CHCR(2))(PPh(3))] with acetic acid affords the corresponding olefins R(2)C=CHCH(3). The by-product of this process is the acetato derivative [(eta(5)-C(5)H(5))Ru(kappa(2)-O(2)CCH(3))(PPh(3))], which can be reconverted to the carbene complexes [(eta(5)-C(5)H(5))RuCl(=CR(2))(PPh(3))] in a one-pot reaction with R(2)CN(2) and Et(3)NHCl.     

Reaction of the silylene Si[(NCH2But)2C6H4-1,2] with the alkali metal silylamides M[N(SiMe3)R](M = Li, Na or K; R = SiMe3 or SiMe2Ph)

The thermally stable silylene Si[(NCH(2)Bu(t))(2)C(6)H(4)-1,2] 1 undergoes oxidative addition reactions with the alkali metal silylamides MN(SiMe(3))(2)(M = Li, Na or K) to afford the new alkali metal amides MN(SiMe(3))[(1)SiMe(3)][M = Li (2), Na (3) or K (4)]. Reaction of two equivalents of 1 with LiN(R)(SiMe(3)) leads in a two-step process to the compound LiN[(1)R][(1)SiMe(3)][R = SiMe(2)Ph (5) or SiMe(3) (6)]. Alternatively, 1 reacts with 3 to afford NaN[(1)SiMe(3)](2) (7). The structures of 2-5 and are presented and the formation of 2-7 is discussed.     

Synthetic and structural studies of donor-functionalized alkoxy derivatives of gallium

The synthesis of a range of alkyl/chloro-gallium alkoxide and amido/alkoxide compounds was achieved via a series of protonolysis and alcoholysis steps. The initial reaction involved the synthesis of [Me(Cl)Ga{N(SiMe(3))(2)}](2) (1) via methyl group transfer from the reaction of GaCl(3) with two equivalents of LiN(SiMe(3))(2). Reaction of 1 with varying amounts of ROH resulted in the formation of [Me(Cl)Ga(OR)](2) (2, R = CH(2)CH(2)OMe; 3, CH(CH(3))CH(2)NMe(2)), [Me(Cl)Ga{N(SiMe(3))(2)}(μ(2)-OR)Ga(Cl)Me] (4, R = CH(2)CH(2)NMe(2)), or [MeGa(OR)(2)] (5, R = CH(CH(3))CH(2)NMe(2)). Compound 4 represents an intermediate in the formation of dimeric complexes, of the type [Me(Cl)Ga(OR)](2), when formed from compound [Me(Cl)Ga{N(SiMe(3))(2)}](2). A methylgallium amido/alkoxide complex [MeGa{N(SiMe(3))(2)}(OCH(2)CH(2)OMe)](2) (6) was isolated when 2 was further reacted with LiN(SiMe(3))(2). In addition, reaction of 2 with HO(t)Bu resulted in a simple alcohol/alkoxide exchange and formation of [Me(Cl)Ga(O(t)Bu)](2) (7). In contrast to the formation of 1, the in situ reaction of GaCl(3) with one equivalent of LiN(SiMe(3))(2) yielded [Cl(2)Ga{N(SiMe(3))(2)}](2) in low yield, where no methyl group transfer has occurred. Reaction of alcohol with [Cl(2)Ga{N(SiMe(3))(2)}](2) was then found to yield [Cl(2)Ga(OR)](2) (8, R = CH(2)CH(2)NMe(2)), and further reaction of 8 with LiN(SiMe(3))(2) yielded the gallium amido alkoxide complex, [ClGa{N(SiMe(3))(2)}(OR)](2) (9, R = CH(2)CH(2)NMe(2)), similar to 6. The structures of compounds 4, 5, 7, and 8 have been determined by single-crystal X-ray diffraction.     

(N2)3- radical chemistry via trivalent lanthanide salt/alkali metal reduction of dinitrogen: new syntheses and examples of (N2)2- and (N2)3- complexes and density functional theory comparisons of closed shell Sc3+, Y3+, and Lu3+ versus 4f(9) Dy3+

New syntheses of complexes containing the recently discovered (N(2))(3-) radical trianion have been developed by examining variations on the LnA(3)/M reductive system that delivers "LnA(2)" reactivity when Ln = scandium, yttrium, or a lanthanide, M = an alkali metal, and A = N(SiMe(3))(2) and C(5)R(5). The first examples of LnA(3)/M reduction of dinitrogen with aryloxide ligands (A = OC(6)R(5)) are reported: the combination of Dy(OAr)(3) (OAr = OC(6)H(3)(t)Bu(2)-2,6) with KC(8) under dinitrogen was found to produce both (N(2))(2-) and (N(2))(3-) products, [(ArO)(2)Dy(THF)(2)](2)(μ-η(2):η(2)-N(2)), 1, and [(ArO)(2)Dy(THF)](2)(μ-η(2):η(2)-N(2))[K(THF)(6)], 2a, respectively. The range of metals that form (N(2))(3-) complexes with [N(SiMe(3))(2)](-) ancillary ligands has been expanded from Y to Lu, Er, and La. Ln[N(SiMe(3))(2)](3)/M reactions with M = Na as well as KC(8) are reported. Reduction of the isolated (N(2))(2-) complex {[(Me(3)Si)(2)N](2)Y(THF)}(2)(μ-η(2):η(2)-N(2)), 3, with KC(8) forms the (N(2))(3-) complex, {[(Me(3)Si)(2)N](2)Y(THF)}(2)(μ-η(2):η(2)-N(2))[K(THF)(6)], 4a, in high yield. The reverse transformation, the conversion of 4a to 3 can be accomplished cleanly with elemental Hg. The crown ether derivative {[(Me(3)Si)(2)N](2)Y(THF)}(2)(μ-η(2):η(2)-N(2))[K(18-crown-6)(THF)(2)] was isolated from reduction of 3 with KC(8) in the presence of 18-crown-6 and found to be much less soluble in tetrahydrofuran (THF) than the [K(THF)(6)](+) salt, which facilitates its separation from 3. Evidence for ligand metalation in the Y[N(SiMe(3))(2)](3)/KC(8) reaction was obtained through the crystal structure of the metallacyclic complex {[(Me(3)Si)(2)N](2)Y[CH(2)Si(Me(2))NSiMe(3)]}[K(18-crown-6)(THF)(toluene)]. Density functional theory previously used only with reduced dinitrogen complexes of closed shell Sc(3+) and Y(3+) was extended to Lu(3+) as well as to open shell 4f(9) Dy(3+) complexes to allow the first comparison of bonding between these four metals.     

Extremely bulky amido-group 14 element chloride complexes: potential synthons for low oxidation state main group chemistry

The preparation of a series of extremely bulky secondary amines, Ar*N(H)SiR(3) (Ar* = C(6)H(2){C(H)Ph(2)}(2)Me-2,6,4; R(3) = Me(3), MePh(2) or Ph(3)) is described. Their deprotonation with either LiBu(n), NaH or KH yields alkali metal amide complexes, several monomeric examples of which, [Li(L){N(SiMe(3))(Ar*)}] (L = OEt(2) or THF), [Na(THF)(3){N(SiMe(3))(Ar*)}] and [K(OEt(2)){N(SiPh(3))(Ar*)], have been crystallographically characterised. Reactions of the lithium amides with germanium, tin or lead dichloride have yielded the first structurally characterised two-coordinate, monomeric amido germanium(II) and tin(II) chloride complexes, [{(SiR(3))(Ar*)N}ECl] (E = Ge or Sn; R = Me or Ph), and a chloride bridged amido-lead(II) dimer, [{[(SiMe(3))(Ar*)N]Pb(μ-Cl)}(2)]. DFT calculations on [{(SiMe(3))(Ar*)N}GeCl] show its HOMO to exhibit Ge lone pair character and its LUMO to encompass its Ge based p-orbital. A series of bulky amido silicon(IV) chloride complexes have also been prepared and several examples, [{(SiR(3))(Ar*)N}SiCl(3)] (R(3) = Me(3), MePh(2)) and [{(SiMe(3))(Ar*)N}SiHCl(2)], were crystallographically characterised. The sterically hindered group 14 complexes reported in this study hold significant potential as precursors for kinetically stabilised low oxidation state and/or low coordination number group 14 complexes.     

Methyl displacements from cyclopentadienyl ring planes in sterically crowded (C5Me5)3M complexes

The displacements of the methyl substituents away from the metal and out of the cyclopentadienyl ring plane are compared in sterically crowded (C(5)Me(5))(3)M complexes vs sterically normal f-element complexes in an attempt to evaluate the utility of this parameter in predicting unusual (C(5)Me(5))(1-) ring reactivity. The out-of-plane displacements of 16 sterically crowded tris(cyclopentadienyl) complexes of general formula (C(5)Me(5))(3)M, (C(5)Me(4)R)(3)M (R = Et, (i)Pr, (t)()Bu, SiMe(3)), (C(5)Me(5))(3)MX (X = anion), and (C(5)Me(5))(3)ML (L = neutral ligand) are compared with [(C(5)Me(5))(2)U](2)(C(6)H(6)), (C(5)Me(5))(2)Sm(PC(4)H(2)(t)Bu(2)), and 33 representative examples of f-element bis(cyclopentadienyl) complexes with normal cyclopentadienyl behavior and coordination numbers ranging from 6 to 10. In general, the methyl displacement values of sterically crowded complexes overlap with those in the other complexes, which demonstrates that the basis of the structural distortions is complex. However, if the most extreme out-of-plane displacement in each of the sterically crowded complexes is examined vs the analogous maximum out-of-plane displacement in less crowded systems, there appears to be a basis for predicting cyclopentadienyl reactivity.     

The course of (R2R'SiO)3TaCl2 (R = tBu, R' = H, Me, Ph, tBu (silox); R = iPr, R' = tBu, iPr) reduction is dependent on siloxide size

Various sized siloxides (Cy(3)SiO > (t)Bu(3)SiO > (t)Bu(2)PhSiO > (t)Bu(2)MeSiO approximately (i)Pr(2)(t)BuSiO > (i)Pr(3)SiO > (t)Bu(2)HSiO) were used to make (R(2)R'SiO)(3)TaCl(2) (R = (t)Bu, R' = H (1-H), Me (1-Me), Ph (1-Ph), (t)Bu (1); R = (i)Pr, R' = (t)Bu (1-(i)Pr(2)); R = R' = (i)Pr (1-(i)Pr(3)); R = R' = (c)Hex (Cy)). Product analyses of sodium amalgam reductions of several dichlorides suggest that [(R(2)R'SiO)(3)Ta](2)(mu-Cl)(2) may be a common intermediate. When the siloxide is large (1-(t)Bu), formation of the Ta(III) species ((t)Bu(3)SiO)(3)Ta (6) occurs via disproportionation. When the siloxide is small, the Ta(IV) intermediate is stable (e.g., [((i)Pr(3)SiO)(3)Ta](2)(mu-Cl)(2) (2)), and when intermediate sized siloxides are used, solvent bond activation via unstable Ta(III) tris-siloxides is proposed to occur. Under hydrogen, reductions of 1-Me and 1-Ph provide Ta(IV) and Ta(V) hydrides [((t)Bu(2)MeSiO)(3)Ta](2)(micro-H)(2) (4-Me) and ((t)Bu(2)PhSiO)(3)TaH(2) (7-Ph), respectively.     

Low-coordinate iron(II) amido complexes of beta-diketiminates: synthesis, structure, and reactivity

The synthesis, structure, and reactivity of a series of low-coordinate Fe(II) diketiminate amido complexes are presented. Complexes L(R)FeNHAr (R = methyl, tert-butyl; Ar = para-tolyl, 2,6-xylyl, and 2,6-diisopropylphenyl) bind Lewis bases to give trigonal pyramidal and trigonal bipyramidal adducts. In the adducts, crystallographic and (1)H NMR evidence supports the existence of agostic interactions in solid and solution states. Complexes L(R)FeNHAr may be oxidized using AgOTf, and the products L(R)Fe(NHAr)(OTf) are characterized with (19)F NMR spectroscopy, UV/vis spectrophotometry, solution magnetic measurements, elemental analysis, and, in one case, X-ray crystallography. In the structures of the iron(III) complexes L(R)Fe(NHAr)(OTf) and L(R)Fe(OtBu)(OTf), the angles at nitrogen and oxygen result from steric effects and not pi-bonding. The reactions of the amido group of L(R)FeNHAr with weak acids (HCCPh and HOtBu) are consistent with a basic nitrogen atom, because the amido group is protonated by terminal alkynes and alcohols to give free H(2)NAr and three-coordinate acetylide and alkoxide complexes. The trends in complex stability give insight into the relative strength of bonds from three-coordinate iron to anionic C-, N-, and O-donor ligands.     

Magnesium(II) complexes of 2,4-N,N'-disubstituted 1,3,5-triazapentadienyl ligands: synthesis and characterization of [N(Dipp)C(NMe2)NC(NMe(2))N(SiMe3)MgBr]2 and [N(R)C(R')NC(R')N(SiMe3)]2Mg (Dipp = 2,6-iPr2-C6H3, R = Ph, SiMe(3); R' = NMe2, 1-piperidino)

Treatment of the appropriate lithium or sodium 2,4-N,N'-disubstituted 1,3,5-triazapentadienate [RNC(R')NC(R')N(SiMe(3))M](2) (R = Ph, 2,6-(i)Pr(2)-C(6)H(3)(Dipp) or SiMe(3); R' = NMe(2) or 1-piperidino; M = Li or Na) with one or half equivalent portion of MgBr(2)(THF)(2) in Et(2)O under mild conditions furnishes in good yield the first structurally characterized molecular magnesium 2,4-N,N'-disubstituted 1,3,5-triazapentadienates [DippNC(NMe(2))NC(NMe(2))N(SiMe(3))MgBr](2) (1), [{RNC(R')NC(R')N(SiMe(3))}(2)Mg] (R = Ph, R' = NMe(2) 2; R = Ph, R' = 1-piperidino 3; R = SiMe(3), R' = 1-piperidino 4). The solid-state structure of 1 is dimeric and those of 2, 3, and 4 are monomeric. The ligand backbone NCNCN in 1 adopts a W-shaped configuration, while in 2, 3 and 4 adopts a U-shaped configuration.     

Reactions of a gallium(II)-diazabutadiene dimer, [{{[(H)C(Bu(t))N]2}GaI}2], with [ME(SiMe3)2] (M = Li or Na; E = N, P, or As): structural, EPR, and ENDOR characterization of paramagnetic gallium(III) pnictide complexes

The reactions of the paramagnetic gallium(II) complex [{(Bu(t)-DAB)GaI}2] (Bu(t)-DAB = {(Bu(t))NC(H)}2) with the alkali metal pnictides [ME(SiMe3)2] (M = Li or Na; E = N, P, or As) have been carried out under a range of stoichiometries. The 1:2 reactions have led to a series of paramagnetic gallium(III)-pnictide complexes, [(Bu(t)-DAB)Ga{E(SiMe3)2}I] (E = N, P, or As), while two of the 1:4 reactions afforded [(Bu(t)-DAB)Ga{E(SiMe3)2}2] (E = P or As). In contrast, treatment of [{(Bu(t)-DAB)GaI}2] with 4 equiv of [NaN(SiMe3)2] resulted in a novel gallium heterocycle coupling reaction and the formation of the diradical species [(Bu(t)-DAB)Ga{N(SiMe3)2}{[CC(H)N2(Bu(t))2]Ga[N(SiMe3)2]CH3}]. The mechanism of this unusual reaction has been explored, and evidence suggests it involves an intramolecular transmethylation reaction. The X-ray crystal structures of all prepared complexes are reported, and all have been characterized by EPR and ENDOR spectroscopies. The observed spin Hamiltonian parameters provide a detailed picture of the distribution of the unpaired spin density over the molecular frameworks of the complexes.