多嵌段聚醚-酯共混物的微相结构与血液相容性研究

本工作合成了两种性质不同的聚醚-酯多嵌段共聚物,一种是以聚对苯二甲酸乙二酯为硬链段,聚乙二醇(PEGT)为软链段的亲水性多嵌段共聚物,另一种是以聚对苯二甲酸乙二酯为硬链段,聚四亚甲基醚二醇(PTMGT)为软链段的疏水性多嵌段共聚物。将两种共聚物以一定的比例共混,制备多嵌段聚醚-酯共混物。 改变共混物的组成,研究其微相结构与血液相容性的关系。采用动态力学谱(VES)、示差扫描量热(DSC)、透射电镜(TEM)和扫描电镜(SEM)等测定共混物的微观结构,采用微球柱法评价共混物的血液相容性。实验结果表明:材料的微观非均相结构及亲水平衡是决定血液相容性的重要因素。     

（PSF—PDMS—PHS）n／PSF共混物的相容性及表面组成

利用ＤＳＣ、ＤＭＡ、ＴＥＭ和ＸＰＳ对［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ／ＰＳＦ共混物的相容性及表面组成进行了研究．结果表明，ＰＤＭＳ在共混物表面的富集与ＰＳＦ均聚物和［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ中硬段的相容性有关；ＰＤＭＳ在相容的共混物体系表面的富集与对应的多嵌段共聚物组成基本相近；不相容共混物体系表面ＰＤＭＳ的富集程度相对较高，当共混物本体中有机硅含量从１％增至５％，表面层ＰＤＭＳ的含量迅速增加，可达到嵌段共聚物中ＰＤＭＳ的含量．     

聚醚聚酯嵌段共聚物的表面性质对血液相容性的影响

聚合物的表面性质和结构对血液相容性具有很大的影响。本文通过接触角、吸水率和电子能谱研究了聚醚聚酯嵌段共聚物混合物的表面组成及微相分离结构。电子能谱的测试表明:试样空气面的氧碳元素比高于试样本体,表明醚键向空气面扩散,并以此来估量试样空气面的组成分布。试样的血液相容性与试样空气面氧碳比的提高程度随试样中聚乙二醇对苯二甲酸酯(PEGT)组成的递增呈相似的变化趋势,在共混物中软链段的组分比:聚四亚甲基二醇对苯二甲酸酯/聚乙二醇对苯二甲酸酯(PTMGT/PEGT)=60/40时,试样的接触角最大、氧碳比的提高率最大、血液相容性最好,且试样呈现最为细微的相分离结构。由此表明聚醚聚酯嵌段共聚物混合物的血液相容性主要受表面组成、各链段的表面自由能及微相分离程度的影响。     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物/聚苯醚共混物的相容性和结晶行为

本工作对聚氧化乙烯-聚苯乙烯-聚氧化乙烯(PEO-PS-PEO)三嵌段共聚物与聚苯醚(PPO)均聚物共混物的相容性及结晶行为进行了研究。结果表明,共混体系的相容性与嵌段共聚物中苯乙烯段的含量有关,PS含量越高,PPO与共聚物PS段的相容性越好。共混体系的结晶行为也明显不同于一般均聚物共混体系。在DSC降温结晶过程中最多可出现三个结晶峰。     

含有二个聚醚软链段的聚醚聚酯嵌段共聚物的合成及其血液相容性的研究

本文报道了一类新的具有二种聚醚软链段(PTMGT和PEGT)和一种聚酯硬链段(PET)的混合聚醚-聚酯嵌段共聚物(MPEE)的合成和它的血液相容性,并与具有相同软、硬链段比及相同软链段组成比(PTMGT/PEGT)的二种聚醚聚酯嵌段共聚物(PTMGT-PET和PEGT-PET)的共混物(BPEE)的性质进行了比较,结果表明:(1)聚醚聚酯嵌段共聚物的血液相容性可以通过引入亲水性好的PEGT组分而得到提高;(2)在多数的组成比下,共聚型的MPEE具有比共混型的BPEE优良的血液相容性;(3)特定的组成比:PTMGT/PEGT=60/40(mol),共混型的BPEE:(60/40)呈现最好的血液相容性以及最佳的力学性质。研究中发现材料的微相分离结构同血液相容性有关,细微的相分离结构可导致优良的血液相容性。     

聚氧化乙烯-聚苯乙烯-聚氧化乙烯三嵌段共聚物/聚苯醚共混物的相容性和结晶行为

 本工作对聚氧化乙烯-聚苯乙烯-聚氧化乙烯(PEO-PS-PEO)三嵌段共聚物与聚苯醚(PPO)均聚物共混物的相容性及结晶行为进行了研究。结果表明,共混体系的相容性与嵌段共聚物中苯乙烯段的含量有关,PS含量越高,PPO与共聚物PS段的相容性越好。共混体系的结晶行为也明显不同于一般均聚物共混体系。在DSC降温结晶过程中最多可出现三个结晶峰。     

含有二个聚醚软链段的聚醚聚酯嵌段共聚物的合成及其血液相容性的研究

 本文报道了一类新的具有二种聚醚软链段(PTMGT和PEGT)和一种聚酯硬链段(PET)的混合聚醚-聚酯嵌段共聚物(MPEE)的合成和它的血液相容性,并与具有相同软、硬链段比及相同软链段组成比(PTMGT/PEGT)的二种聚醚聚酯嵌段共聚物(PTMGT-PET和PEGT-PET)的共混物(BPEE)的性质进行了比较,结果表明:(1)聚醚聚酯嵌段共聚物的血液相容性可以通过引入亲水性好的PEGT组分而得到提高;(2)在多数的组成比下,共聚型的MPEE具有比共混型的BPEE优良的血液相容性;(3)特定的组成比:PTMGT/PEGT=60/40(mol),共混型的BPEE:(60/40)呈现最好的血液相容性以及最佳的力学性质。研究中发现材料的微相分离结构同血液相容性有关,细微的相分离结构可导致优良的血液相容性。     

沉淀分离法及高效凝胶色谱分析聚合物的共混物-聚苯乙烯、氯醇橡胶及苯乙烯与环氧丙烷嵌段共聚物

 ]脆性的聚苯乙烯塑料与韧性的氯醇橡胶共混，聚苯乙烯-聚环氧丙烷的多嵌段共聚物作为共混物的增容剂，这种共混高分子材料具有热塑性弹性体的基本特点。本文用沉淀分离法定量得到共混物的组分，并用高效凝胶色谱（GPC）分析各组分的含量；从GPC曲线计算嵌段共聚物的k和值；表征了聚苯乙烯-聚环氧丙烷的嵌段共聚物分子量、分子量分布及组成。     

介观相分离对等规聚丙烯/烯烃嵌段共聚物共混体系相容性的影响

研究了2种烯烃嵌段共聚物(OBC1和OBC2)与等规聚丙烯(iPP)的相容性,其中2种烯烃嵌段共聚物具有相近的软硬段组成,软硬段中辛烯含量接近,但分子量不同.通过对OBC线性黏弹性的研究发现高分子量的OBC1会发生较强的介观相分离,而在所研究的温度范围内,低分子量的OBC2保持均相.利用了液滴回缩和流变学的方法测量了2种iPP/OBC共混体系的界面张力,同时采用动态力学分析研究了共混物中组分玻璃化转变温度的变化,并通过自浓度模型估算了2种OBC与iPP互溶的溶解度.结果发现虽然OBC1与iPP的界面张力较高,但二者之间的相容性却优于OBC2与iPP的相容性,这很可能是OBC1分子量大,嵌段共聚物的强介观相分离所导致其与iPP相容性更好.对iPP/OBC共混体系结晶行为的研究也证实了相容性差异对共混物中等规聚丙烯结晶行为的影响.     

聚氧乙烯功能基复合修饰聚氨酯的合成及其血液相容性研究 (Ⅰ)──聚氨酯-接枝-十八烷基聚氧乙烯

通过十八烷基聚氧乙烯和环氧氯丙烷的封端反应制备了α-环氧基-ω-十八烷基聚氧乙烯大单体.并采用BF₃·Et₂O引发THF和大单体共聚合,得到了梳状的十八烷基聚氧乙烯接枝共聚醚.以该共聚醚为软段合成了十八烷基和聚氧乙烯复合修饰的聚氨酯(PEU-g-PEO-C₁₈).通过血小板粘附试验对材料的体外抗凝血性实验结果表明,采用具有选择性吸附白蛋白功能的十八烷基和PEO复合修饰聚氨酯,材料表面血小板粘附量明显减少.材料血液相容性的改善可能来源于疏水性的十八烷基和亲水性聚氧乙烯的协同作用.     

Mixed Polyether-Polyester Multiblock Copolymer and its Blood Compatibility

A new type of polyether-polyester block copolymer (MPEE) consisting of two components of polyethers (PTMGT and PEGT) as soft segment and one polyester (PET) as hard segment has been synthesized. It has also been investigated in comparison with blended polyether-polyester block copolymer (BPEE) consisting of the same composition ratio of hard and soft segments and both of the two polyethers (PTMG and PEG). It was found that 1) Improvement of blood compatibility of polyether-polyester block copolymer can be achieved by introducing the hydrophilic component PEG into it; 2) generally the blood compatibility of MPEE is better than that of BPEE; 3) at a specific molar ratio of PTMGT-PET to PEGT-PET (60/40), the blended copolymer (BPEE 60/40) shows the best blood compatibility, as well as the best mechanical properties. This might be related to smaller-size microphaseseparated structures. The relationship between blood compatibility and structure of the copolymer is discussed. Polyether-polyester block copolymer containing hydrophilic and hydrophobic components might be a useful material with antithrombogenicity.     

Interpenetrating polymer networks of polyurethane and maleimide-terminated polyurethane for biomedical applications

Interpenetrating polymer networks (IPNs) of polyurethane (PU) and maleimide-terminated polyurethane (UBMI) were prepared by using a simultaneous polymerization technique. The effects of the UBMI molecular weight and amounts of the UBMI in the IPNs on the mechanical properties, dynamic mechanical properties, degree of compatibility, water absorption, surface properties and dynamic thrombosis were investigated. Bulk structure and surface properties were analyzed in order to correlate their blood compatibility. The IPNs exhibited a higher ultimate tensile strength especially when the UBMI with short soft chains was introduced. The heterogeneous characteristics were found for the IPNs when longer soft segment chains were incorporated in the PU component polymer. The presence of hydrophilic/hydrophobic alternative microdomains on the IPN surface was proposed to be the reason for good blood compatibility. The degree of compatibility, compositions of each domain and content of each domain in the matrix were calculated and correlated with the blood compatibility.     

Effect of soft segment length on properties of fluorinated polyurethanes

The effects of soft segment length on the variations in morphology, surface composition, and hydrophilicity have been studied in fluorinated polyurethanes (FPUs) and correlated with their preliminary blood compatibility as evidenced by in vitro platelet adhesion experiments. The fluorinated polyurethanes were obtained using hexamethylene diisocyanate (HDI) and chain extender of 2,2,3,3-tetrafluoro-1,4-butanediol (TF) as the hard segment as well as various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400, and 2000. The increased phase separation in hard-segment domains with lengthening soft segment was observed by FT-IR, which is believed to result in enhanced strength of hydrogen bonds and good hard-segment order arrangement. Thin-film XRD results indicate at least three lateral distances existing between adjacent hard segments in the crystallized hard segment. Their distribution depends strongly on the length of soft segment. Lengthening soft segment promotes the formation of dense arrangement of crystallized hard segments. Compared with the effect of phase separation, surface composition was found to exert a major influence on the preliminary blood compatibility of fluorinated polyurethanes. Increasing fluorine content by decreasing soft segment length promotes reduction in platelet adhesion and activation on polyurethane surfaces.     

PDMS-MDI-PEG多嵌段共聚物涂层表面微相分离行为研究

采用两步溶液聚合方法合成了一系列聚二甲基硅氧烷(PDMS)-4,4′-二苯基甲烷二异氰酸酯(MDI)-聚乙二醇(PEG)多嵌段共聚物.利用轻敲模式原子力显微镜(AFM)观察了嵌段共聚物的表明形貌,研究了退火、共聚物组成以及PEG分子量和不同的官能团对涂层表面微相分离行为的影响,同时对微相分离行为的形成机理也作了相应的探讨.研究表明,该嵌段共聚物即使在PDMS含量大于50wt%时,涂层表面仍呈现出规整有序的纳米级相分离结构,其中疏水相和亲水相分别由PDMS链段和MDI-PEG组分构成.     

含氟/PEG的有机硅基双亲防污涂层的制备及性能

以不同分子量的端氢硅油(PDMS)和聚乙二醇二烯丙基醚(PEGDE)为原料,通过硅氢加成合成了系列双键封端的含有机硅和聚乙二醇(PEG)链段的多嵌段共聚物(PDMS-b-PEG)m,再用三甲氧基氢硅烷进行端基官能化,生成三甲氧基硅烷封端的多嵌段聚合物,即含PEG前驱物.含PEG前驱物、含氟前驱物(FMS-9922)与有机硅基体树脂通过缩合聚合制备了含PEG的氟硅双亲弹性防污涂层.通过核磁共振氢谱、红外光谱对PEG前驱物的结构进行了表征.吸水率、SEM-EDS和接触角测试考察了含PEG前驱物中疏水链段的长度,含氟前驱物的含量对涂层表面重排的影响,结果表明PEG前驱物中疏水链段越长,涂层的吸水率越低,在水中越稳定,且表面不易发生重排.而含氟前驱物的加入能促使PEG链段向表面方向迁移.抗蛋白、抗菌和抗藻附着性能测试表明:含有FMS-9922的样品防污性能均优于不含FMS-9922的样品,而且随着FMS-9922用量增加,涂层防污性能呈上升趋势;但是FMS-9922用量太高时,体系相容性下降,防污性能也随之变差,故FMS-9922的含量控制在7%为宜.     

Preparation of bi-layer-polymer coated silica using atom transfer radical polymerization and its application as restricted access phase for HPLC separation of hydrophobic molecules in biological fluids

A novel restricted access material was prepared by surface initiated atom transfer radical polymerization. The bi-layer-polymer structures were created on the surface of silica layer-by-layer. The inner layer was composed of poly(styrene-co-divinylbenzene), which was grafted first for binding small molecules based on hydrophobic and π-π interactions. The poly(styrene-co-divinylbenzene) bonded silica has good selectivity for aromatic hydrocarbons. It also has hydrophobicity and column efficiency similar to a C(18) bonded silica. The material has shown good ability of protein exclusion after grafting hydrophilic polymer on the external surface while its hydrophobicity and selectivity do not have obvious change. It demonstrated that the material is still qualified for hydrophobic extraction. In the study, the relations between the polymer structures and chromatographic properties of the materials were investigated. The synthetic conditions were optimized. The results have shown that the material prepared in the study has application potential in the HPLC analysis of hydrophobic molecules from biological samples by direct injection. It demonstrated that atom transfer radical polymerization can be used as a method in the preparation of restricted access material.     

软段和硬段结构对交联的嵌段共聚物力学阻尼及相容性的影响

本文研究了链段结构对多嵌段共聚物网的相容性及动态力学阻尼性能的影响。分别以端乙烯基低聚物作为软链段,乙烯类聚合物作为硬链段,制备了一系列具有不同链段结构共聚物网。它们在大于50℃的温度范围,能阻尼机械振动。共聚物网中某些软链段和硬链段成分是半相容的。基于这些配方的许多共聚物网,在需要的温度范围,tanδ>1.75。