Recent developments and applications of liquid phase microextraction in fruits and vegetables analysis

The sample preparation step has been identified as the bottleneck of analytical methodology in chemical analysis. Therefore, there is need for the development of cost‐effective, easy to operate, and environmentally friendly miniaturized sample preparation technique. The microextraction techniques combine extraction, isolation, concentration, and introduction of analytes into analytical instrument, to a single and uninterrupted step, and improve sample throughput. The use of liquid‐phase microextraction techniques for the analysis of pesticide residues in fruits and vegetables are discussed with the focus on the methodologies employed by different researchers and their analytical performances. Analytes are extracted using water‐immiscible solvents and are desorbed into gas chromatography, liquid chromatography, or capillary electrophoresis for identification and quantitation.     

Recent developments in stir bar sorptive extraction

As a crucial step in qualitative and quantitative analysis, sample pretreatment is commonly used to isolate the target analytes, concentrate them, or convert them into the forms tailored to the instrumental analysis. In recent years, there has been a trend for sample pretreatment techniques to become more miniaturized and more environmentally friendly. Stir bar sorptive extraction (SBSE), which was developed in 1999, is such an environmentally friendly microextraction technique. Compared with other microextraction techniques, including solid phase microextraction and liquid phase microextraction, SBSE provides a higher extraction efficiency and better reproducibility owing to the much greater amount of the extraction phase, and no special skills are required. However, there are some problems associated with SBSE, such as the limited applicable coatings, coating abrasion of the laboratory-made stir bar, and the difficulty in automation, which restrict the further improvement and application of SBSE. This review focuses on the development of SBSE in the past decade, in terms of coating preparation, automated systems, novel extraction modes, its use with various instruments, and applications in food, environmental, and biological samples.

搅拌棒吸附萃取涂层研制进展

搅拌棒吸附萃取(SBSE)是20世纪90年代末发展起来的一种新型无溶剂样品前处理技术,具有固定相体积大、萃取容量高、无需外加搅拌子、可避免竞争性吸附、能在自身搅拌的同时实现萃取富集等优点,已广泛应用于环境、食品和生物等复杂样品中目标物质的痕量分析。涂层是SBSE技术的核心,决定了萃取选择性和容量。本文简要介绍了SBSE涂层的萃取原理、萃取解吸模式及其影响因素,重点阐述了近年SBSE涂层制备技术与方法,探讨了SBSE涂层发展中的不足,并展望了其发展趋势。     

Multi-residue screening of pesticides in vegetables,fruits and baby food by stir bar sorptive extraction-thermal desorption-capillary gas chromatography-mass spectrometry

The performance of stir bar sorptive extraction (SBSE) for the enrichment of pesticides from vegetables, fruits and baby food samples is discussed. After extraction with methanol, an aliquot is diluted with water and SBSE is performed for 60 min. By applying a new thermal desorption unit (TDU), fully automated and unattended desorption of 98 stir bars is feasible, making SBSE very cost-effective. The presence of pesticide residues is elucidated with the retention time locked gas chromatography–mass spectroscopy method (RTL-capillary GC–MS). With SBSE–RTL-capillary GC–MS operated in the scan mode, more than 300 pesticides can be monitored in vegetables, fruits and baby food. The multi-residue method (MRM) described provides detectabilities from the mg/kg (ppm) to the sub-μg/kg (ppb) level, thereby complying with the maximum residue levels (MRLs) set by regulatory organizations for pesticides in different matrices. Several examples, i.e. pesticide residues in lettuce, pears, grapes and baby food, illustrate the potential of SBSE–RTL-capillary GC–MS.     

Stir-bar sorptive extraction: A view on method optimisation,novel applications,limitations and potential solutions

Introduced in 1999 as a novel solventless sample preparation method, stir-bar sorptive extraction (SBSE) has become a popular analytical technique for the pre-concentration of organic compounds into a polydimethylsiloxane (PDMS)-coated stir-bar. In the last 10 years, hundreds of applications in the environmental, food and biomedical fields can be found in the literature. However, only PDMS-coated stir-bars are commercially available, which reduces the applicability of SBSE to the extraction of the non-polar compounds due to the poor extractability of more polar analytes. In this review, a view on method optimisation, limitations, potential solutions such as in-house coatings and derivatisation and novel applications in multi-residue analysis and passive sampling are revised.     

搅拌棒固相萃取的研究进展

作为一种新型的环境友好型样品前处理技术,搅拌棒固相萃取(SBSE)集萃取、净化和富集为一体,已经在环境监测、食品安全和生物分析等领域进行了广泛应用。本文结合作者所在研究小组的研究工作,对近几年来SBSE技术的发展进行综述,重点阐述了各种新涂层的研究和应用,同时就SBSE发展方向提出了展望。     

Strategies for the microextraction of polar organic contaminants in water samples

In this paper the most recent developments in the microextraction of polar analytes from aqueous environmental samples are critically reviewed. The particularities of different microextraction approaches, mainly solid-phase microextraction (SPME), stir-bar-sorptive extraction (SBSE), and liquid-phase microextraction (LPME), and their suitability for use in combination with chromatographic or electrically driven separation techniques for determination of polar species are discussed. The compatibility of microextraction techniques, especially SPME, with different derivatisation strategies enabling GC determination of polar analytes and improving their extractability is revised. In addition to the use of derivatisation reactions, the possibility of enhancing the yield of solid-phase microextraction methods for polar analytes by using new coatings and/or larger amounts of sorbent is also considered. Finally, attention is also focussed on describing the versatility of LPME in its different possible formats and its ability to improve selectivity in the extraction of polar analytes with acid-base properties by using separation membranes and buffer solutions, instead of organic solvents, as the acceptor solution.     

羰基铁粉掺杂整体柱萃取-在线热解吸进样气相色谱-串联质谱法分析茶叶样品中拟除虫菊酯类农药残留

制备了羰基铁粉掺杂硅胶整体柱，用于拟除虫菊酯类农药残留萃取，并与气相色谱-串联质谱（GC-MS/MS）法联用，建立了在线富集、热解吸GC-MS/MS测定茶叶样品中拟除虫菊酯类农药残留方法。研究将端羟基聚二甲基硅氧烷共价键合到SiO₂网络表面，并同时键合羰基铁粉。将目标分析物吸附并浓缩在聚二甲基硅氧烷位点上后，利用羰基铁粉的高频感应加热特性成功实现了GC-MS/MS直接气体进样并可达到快速、均匀解吸的目的。实验结果表明，在最佳条件下，本方法的富集倍数可达到约1000倍。拟除虫菊酯类农药残留的检出限为3.8~7.5 μg/kg，相对标准偏差为3.2%~6.8%（n=6）。该方法的提取回收率为97.7%~110.5%，相关系数≥0.9960。该法的吸附容量大，在电磁感应的条件下进行热脱附继而直接与GC-MS结合实现在线分析以及无溶剂洗脱。与常规固相微萃取（SPME）方法相比，该方法具有富集因子高、整体柱吸附容量大、可重复使用、自动化程度高、普适性好等优点。在样品前处理及复杂基质中农药残留的提取方面具有重要的研究意义。     

Determination of pesticides in fruit and fruit juices by chromatographic methods. An overview

In order to combat a variety of pests, pesticides are widely used in fruits. Several extraction procedures (liquid extraction, single drop microextraction, microwave-assisted extraction, pressurized liquid extraction, supercritical fluid extraction, solid-phase extraction, solid-phase microextraction, matrix solid-phase dispersion, and stir bar sorptive extraction) have been reported to determine pesticide residues in fruits and fruit juices. The significant change in recent years is the introduction of the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) methods in these matrices analysis. A combination of techniques reported the use of new extraction methods and chromatography to provide better quantitative recoveries at low levels. The use of mass spectrometric detectors in combination with liquid and gas chromatography has played a vital role to solve many problems related to food safety. The main attention in this review is on the achievements that have been possible because of the progress in extraction methods and the latest advances and novelties in mass spectrometry, and how these progresses have influenced the best control of food, allowing for an increase in the food safety and quality standards.     

Characterization of Kimchi Flavor with Preconcentration by Head Space Solid-Phase Microextraction and Stir Bar Sorptive Extraction and Analysis by Gas Chromatography-Mass Spectrometry

Kimchi is a traditional fermented vegetable, known for its complex flavor. Herein, we compared compounds related to the kimchi flavor, identified by gas chromatography-mass spectrometry (GC-MS) with the developed solid phase microextraction (SPME) and stir bar sorptive extraction (SBSE) techniques. Although headspace-solid phase microextraction (HS-SPME) detected more volatile compounds than nondestructive-headspace-solid-phase microextraction (ND-HS-SPME), those identified by ND-HS-SPME were considered closely related to the flavor of the intact kimchi. Furthermore, direct immersion-stir bar sorptive extraction (DI-SBSE) detected more volatile and nonvolatile compounds than headspace-stir bar sorptive extraction (HS-SBSE), while more sulfur compounds were identified by HS-SBSE. Therefore, we recommend the use of the HS-SPME method using a divinylbenzene/carboxen/polydimethylsiloxane fiber for identifying compounds related to the kimchi flavor. In addition, principal component analysis showed ND-HS-SPME and HS-SBSE to be closely clustered. Overall, we estimated that the samples obtained via the nondestructive sample preparation emits fewer polar volatile flavor compounds than those obtained using the destructive sample preparation. Considering the findings presented herein, we believe that this study contributes to optimizing the flavor analysis of kimchi and other fermented vegetables.     

Synthesis and characterization of polydimethylsiloxane-cyanopropyltriethoxysilane-derived hybrid coating for stir bar sorptive extraction

New inorganic–organic hybrid materials were synthesized by hydrolysis and condensation of cyanopropyltriethoxysilane (CNPrTEOS) and polydimethylsiloxane (PDMS) in the presence of hydrochloric acid, HCl catalyst and methyl trimethylmethoxysilane as precursor via sol–gel method and coated on glass encased stir bar for use in stir bar sorptive extraction (SBSE). The cyano part provides polar moiety, which may improve the extraction of polar analytes. The physico-chemical properties and extraction ability of PDMS-CNPrTEOS-derived hybrid coatings can be fine tuned via manipulation of solvents (tetrahydrofuran (THF)-based and dichloromethane (DCM)-based) and PDMS-CNPrTEOS molar concentrations during the sol synthesis. Clear, homogeneous PDMS-CNPrTEOS-derived hybrid sols were obtained using THF and DCM at optimized molar ratios. The optimized molar ratios of THF:CNPrTEOS and THF:PDMS were 5:1 and 25:1, respectively. The optimized molar ratios of DCM:CNPrTEOS and DCM:PDMS were 10:1 and 70:1, respectively. FTIR spectrum showed that the intensity of the CN peak increased with increasing content of CNPrTEOS in the PDMS;CNPrTEOS-derived hybrid. The Field Emission Scanning Electron micrographs of prepared coatings revealed smooth, homogenous surfaces and crack-free coatings with film thickness of 200 nm to 2.5 μm attributing to different solvent types. All coatings prepared were thermally stable at temperature higher than 200 °C. The DCM-based PDMS-CNPrTEOS-derived coating shows more advantages in terms of physical characteristics and extraction ability compared to THF-based PDMS-CNPrTEOS-derived coatings due to higher cyano part content and its thicker coating. The PDMS-CNPrTEOS-derived hybrid coatings can be used as extraction sorbent for analysis of non steroidal anti-inflammatory drugs namely ketoprofen and diclofenac sodium in SBSE.     

ICE Concentration Linked with Extractive Stirrer (ICECLES)

Trace and ultra-trace analysis can be difficult to achieve, especially for polar, more volatile, and/or thermally unstable analytes. A novel technique, coined ICE Concentration Linked with Extractive Stirrer (ICECLES), may help address this problem. The implementation of ICECLES described here combines stir bar sorptive extraction (SBSE) with freeze concentration (FC), where an aqueous solution is frozen during SBSE in order to concentrate analytes into a polydimethylsiloxane (PDMS) coated stir bar. Five test probe molecules with a range of log K_ows (2-butanol, benzyl alcohol, benzaldehyde, dimethyl trisulfide and bromobenzene) were prepared from aqueous solutions using ICECLES. Thermal desorption gas–chromatography mass–spectrometry was then used to quantify these analytes. Parameters affecting the performance of ICECLES (e.g., freeze rate) were evaluated, with extraction at lower speeds resulting in higher extraction efficiencies, whereas the freeze rate and initial analyte concentration only had a minor effect. ICECLES produced much higher extraction efficiencies than SBSE alone, with signal enhancements of up to 474× SBSE. ICECLES also provided excellent reproducibility and lower LODs than SBSE for all compounds tested. ICECLES performed well when used to analyze multiple triazine pesticides and breakdown products in environmental surface waters. Overall, the ICECLES technique was excellent at preparing aqueous samples for trace analysis and shows promise as a novel analytical sample preparation technology.     

Sol-gel-coated oligomers as novel stationary phases for solid-phase microextraction

Amphiphilic and hydrophilic oligomers were synthesized and coated on fused silica capillaries using a sol-gel technique. Sol-gel-coated capillaries were evaluated for the solid-phase microextraction and preconcentration of a wide variety of non-polar and polar analytes. Both types of coatings were stable under high temperature (up to 280 degrees C). The extraction efficiency of the sol-gel coatings was evaluated for the extraction of both non-polar and polar analytes, including organochlorine pesticides, triazine herbicides, estrogens and alkylphenols (APs) and bisphenol-A (BPA). Compared with commercially available solid-phase microextraction (SPME) adsorbents such as poly(dimethylsiloxane)divenylbenzene and polyacrylate, the new materials showed comparable selectivity and sensitivity towards both non-polar and polar analytes. The new coatings gave good linearity and detection limits. For example with triazines, a detection limit of <0.005 microl l(-1), precision from 5.0 to 11.0% (n = 6) and linearity of the calibration plots (0.5 to 50 microl l(-1)) were obtained. The sol-gel coated SPME capillaries were used for the determination of triazine herbicides in reservoir water samples collected in Singapore.     

Application of high-performance liquid chromatography with ultraviolet diode array detection and refractive index detection to the determination of class composition and to the analysis of gasoline

Two approaches based on sorptive extraction, solid-phase microextraction (SPME) and stir bar sorptive extraction (SBSE), in combination with liquid chromatography (LC)-atmospheric pressure chemical ionization mass spectrometry (MS) have been assayed for analyzing chlorpyriphos methyl, diazinon, fonofos, phenthoate, phosalone, and pirimiphos ethyl in honey. In both, SPME and SBSE, enrichment was performed using a poly(dimethylsiloxane) coating. Significant parameters affecting sorption process such as sample volume, sorption and desorption times, ionic strength, elution solvent, and dilution (water/honey) proportion were optimized and discussed. Performance of both methods has been compared through the determination of linearity, extraction efficiencies, and limits of quantification. Relative standard deviations for the studied compounds were from 3 to 10% by SPME and from 5 to 9% by SBSE. Both methods were linear in a range of at least two orders of magnitude, and the limits of quantification reached ranging from 0.04 to 0.4 mg kg(-1) by SBSE, and from 0.8 to 2 mg kg(-1) by SPME. The two procedures were applied for analyzing 15 commercial honeys of different botanical origin. SPME and SBSE in combination with LC-MS enabled a rapid and simple determination of organophosphorus pesticides in honey. SBSE showed higher concentration capability (large quantities of sample can be handled) and greater accuracy (between 5 and 20 times) and sensitivity (between 10 and 50 times) than SPME: thus, under equal conditions, SBSE is the recommended technique for pesticide analysis in honey.     

衍生多孔碳材料在固相微萃取中的应用研究进展

固相微萃取是一种集采样、萃取、富集和进样于一体的样品前处理技术,其萃取效果与涂层材料密切相关。多孔碳材料具有比表面积大、多孔结构可控、活性位点多和化学稳定性好等优点,广泛应用于电池、超级电容器、催化、吸附和分离等领域,也是一种热门的用作固相微萃取探针的涂层材料。衍生多孔碳材料因种类丰富、可设计性强被广泛研究,研究主要集中在对衍生多孔碳材料的结构优化方面。但是衍生多孔碳材料在固相微萃取中的应用还存在如下问题:(1)共价有机框架衍生多孔碳材料的制备已取得较大进展,但将其应用于固相微萃取领域的研究仍较少;(2)有待进一步明确制备出的衍生多孔碳材料用作固相微萃取涂层表现出优异提取能力的机理;(3)有待进一步深入研究将衍生多孔碳材料用作固相微萃取涂层以实现对不同物理化学性质污染物的广谱高灵敏度分析。文章综述了近3年衍生多孔碳材料在固相微萃取中的应用研究,并展望了未来衍生多孔碳材料在固相微萃取中的研究前景。引用文献共56篇,主要来源于Elsevier。     

Coupling of stir bar sorptive extraction with single photon ionization mass spectrometry for determination of volatile organic compounds in water

A home-made stir bar sorptive extraction (SBSE) apparatus was combined to a single photon ionization time-of-flight mass spectrometer (SPI-TOFMS) for rapid and sensitive determination of trace volatile organic compounds (VOCs) in water. The home-made SBSE bar, low-cost and disposable, was used for VOCs extraction. A thermal desorption (TD) device was designed to desorb the analytes from the SBSE bar, and a high throughput interface was developed to transfer the analytes into the ionization chamber of the SPI-TOFMS. The combination of large extraction volume of SBSE bar, and the direct measurement power of SPI-TOFMS enable a short analysis time for VOCs in water with high sensitivity, for example the limits of detection (LODs) were in the range of 7.4-11.1 ng L(-1) for benzene, toluene, and p-xylene (BTX) within 15 min. BTX aqueous solutions were chosen to demonstrate the quantitative capability, the linear range was from 0.05 to 100 μg L(-1) and the correlation coefficients were better than 0.996. The proposed method was successfully applied for the analysis of VOCs in urban river water.     

样品预处理与实时直接分析质谱的联用技术及应用

近年来,与实时直接分析质谱(DART-MS)相结合的样品预处理技术发展迅速,使得对复杂生物、环境、法医学、食品、个体小生物以及单细胞样品中的分析物进行直接分析成为可能。然而固体基质内部分析物检测困难、痕量分析物检测性能不佳已成为限制DART-MS进一步发展的关键问题。针对这些问题,多年来,研究人员在不同领域对样品预处理与质谱联用进行了多种尝试。该文以固相萃取(SPE)、分散固相萃取(DSPE)、搅拌棒吸附萃取(SBSE)、固相微萃取(SPME)、机械化学提取(MCE)和微波提取(MAE)等样品预处理技术为例,对不同研究领域中样品预处理技术与DART-MS联用的研究成果进行了综述,并对未来的发展趋势进行了展望。希望该综述能为开发与DART-MS联用的新型样品处理技术提供参考和帮助。     

Comparison of stir bar sorptive extraction and solid-phase microextraction to determine halophenols and haloanisoles by gas chromatography-ion trap tandem mass spectrometry

Solid-phase microextraction by immersion (IS-SPME) and headspace mode (HS-SPME), together with stir bar sorptive extraction (SBSE), have been assayed in combination with gas chromatography-ion trap tandem mass spectrometry (MS/MS) for analysing 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol, 2,4,6-tribromophenol, 2,4,6-trichloroanisole, 2,3,4,6-tetrachloroanisole and 2,4,6-tribromoanisole in different liquid matrices. Once, the optimization of MS/MS fragmentation analysis was carried out, sample enrichment was performed using the three mentioned extraction methods, and comparison through the determination of linearity, and LOD and LOQs were carried out. SBSE and IS-SPME methods described enabled us to determine the target compounds at ng/l levels, concentrations lower than their olfactory threshold, which is not the case of HS-SPME. SBSE showed a higher concentration capability than both SPME techniques, especially when compared to the HS-SPME mode. Thus, SBSE should be the definitive technique to analyse halophenols and haloanisoles in aqueous matrices. SBSE has been also applied to nine aqueous matrices as different as tap water, wines or commercial lemon juice extract.     

Recent advances in applications of single-drop microextraction: a review

During the past fifteen years since its introduction, single-drop microextraction has witnessed incessant growth in the range of applications of samples preparation for trace organic and inorganic analysis. This was mainly due to the array of modes that are available to accomplish extraction in harmony with the nature of analytes, and to use the extract directly for analysis by diverse instrumental methods. Whilst engineering of novel sorbent materials has expanded the sample capabilities of rival method of solid-phase microextraction, the single-drop microextraction – irrespective of the mode of extraction – uses common equipment found in analytical laboratories sans any modification, and in a much economic way. The recent innovations made in the field, as highlighted in this review article in the backdrop of historical developments, are due to the freedom in operational conditions and practicability to exploit chemical principals for optimum extraction and sensitive determination of analytes. Literature published till July 2011 has been covered.     

Progress of solid-phase microextraction coatings and coating techniques

Solid-phase microextraction (SPME) has been popular as an environmentally friendly sample pretreatment technique to extract a very wide range of analytes. This is partly owing to the development of SPME coatings. One of the key factors affecting the extraction performances, such as the sensitivity, selectivity, and reproducibility, is the properties of the coatings on SPME fibers. This paper classifies the materials used as SPME coatings and introduces some common preparation techniques of SPME coating in detail, such as sol-gel technique, electrochemical polymerization technique, particle direct pasting technique, restricted access matrix SPME technique, and molecularly imprinted SPME technique.