加工时间可控单机加权总完工时间Pareto优化研究

针对单机环境最优化加权总完工时间问题,当工件加工时间可通过分配资源进行压缩时,研究对工件的加工次序和时间压缩量的优化,从而权衡调度性能目标和资源成本目标。调度性能目标为压缩后工件的加权总完工时间,资源成本目标为工件压缩量的线性函数。此问题复杂性已被证明为NP-hard,为弥补较少有研究从Pareto优化角度求解该问题有效前沿的不足,针对经典NSGA-II求解时易早熟收敛的特点,采用算法混合方式进行优化方法研究。融合归档式多目标模拟退火算法跳出局部极值的优势,启用外部存档策略提升种群的多样性,采用主从模式的并行结构提升求解效率。最后为检验优化方法的有效性,一方面通过对Benchmark测试函数ZDT1-6的求解,表明混合算法对不同结构和形状目标函数兼具普适性和有效性;另一方面结合问题特点设计有效编码方式,针对随机生成算例进行求解。通过分析有效前沿收敛性和多样性,验证了所提方法对于优化加工时间可控单机加权总完工时间问题的有效性。     

Two machine preemptive scheduling problem with release dates,equal processing times and precedence constraints

We consider a scheduling problem with two identical parallel machines and n jobs. For each job we are given its release date when job becomes available for processing. All jobs have equal processing times. Preemptions are allowed. There are precedence constraints between jobs which are given by a (di)graph consisting of a set of outtrees and a number of isolated vertices. The objective is to find a schedule minimizing mean flow time. We suggest an O(n²) algorithm to solve this problem.The suggested algorithm also can be used to solve the related two-machine open shop problem with integer release dates, unit processing times and analogous precedence constraints.     

Preemptive scheduling of equal length jobs with release dates on two uniform parallel machines

We consider a problem of scheduling n jobs on two uniform parallel machines. For each job we are given its release date when the job becomes available for processing. All jobs have equal processing requirements. Preemptions are allowed. The objective is to find a schedule minimizing total completion time. We suggest an O(n³) algorithm to solve this problem.     

Machine scheduling with a rate-modifying activity

Motivated by a problem commonly found in electronic assembly lines, this paper deals with the problem of scheduling jobs and a rate-modifying activity on a single machine. A rate-modifying activity is an activity that changes the production rate of the equipment under consideration. Hence the processing times of jobs vary depending on whether the job is scheduled before or after the rate-modifying activity. The decisions under consideration are when to schedule the rate-modifying activity and the sequence of jobs to optimize some performance measure.In this paper, we develop polynomial algorithms for solving problems of minimizing makespan, and total completion time respectively. We also develop pseudo-polynomial algorithms for solving problems of total weighted completion time under the agreeable ratio assumption. We prove that the problem of minimizing maximum lateness is NP-hard and also provide a pseudo-polynomial time algorithm to solve it optimally.     

订单带多类工件时的最大迟后问题

本文考虑多工类工件的单机排序问题,每一客户提供一由若干工件组成的订单,总共n个工件又分成k个类,当机器从加工某类中的工件转向加工不同于它的第i类工件时需一调整时间S_i,每一订单有一给定的应交工时间,所考虑目标函数是使订单的最大迟后最小,相应这一排序问题的三种模式,文中分别给出了一多项式算法,分枝定界算法和动态规划解法。     

Reduction of job-shop problems to flow-shop problems with precedence constraints

We study the problem of scheduling N independent jobs in a job-shop environment. Each job must be processed on M machines according to individual routes. The objective is to minimize the maximum completion time of the jobs. First, the job-shop problem is reduced to a flow-shop problem with job precedence constraints. Then, a set of flow-shop algorithms are modified to solve it. To evaluate the quality of these heuristics, several lower bounds on the optimal solution have been computed and compared with the heuristic solutions for 3040 problems. The heuristics appear especially promising for job-shop problems with ‘flow-like’ properties.     

Minimizing the Number of Tardy Jobs in a Permutation Flowshop Scheduling Problem with Setup Times and Time Lags Constraints

This paper studies the permutation flowshop scheduling problem with sequence dependent setup times and time lags constraints minimizing the number of tardy jobs. Dependent setup times are defined as the work to prepare the machines between two successive jobs. Time lags are defined as intervals of time that must exist between every couple of successive operations of the same job. Two mathematical programming formulations are proposed for the considered problem. A simulated annealing algorithm is also developed to solve the problem. Computational experiments are presented and discussed.     

订单带多工类工件时的极小迟后范围问题

本文考虑下述由多工类工件组成的订单的单机排序问题：每一个客户提供一个由若干工件组成的订单,总共n个工件又分成k个类．当机器从加工某类中的工件转向加工不同于它的第i类工件时,需一调整时间si．每一订单有一给定的应交工时间,订单的完工时间定义为该定单所含全部工件完工时的时间．我们希望适当排列这n个工件,使得订单的迟后范围最小．相应这一排序问题,文中依不同的背景给出了以下二种模式：同类工件一起连续加工,工件的完工时间为其所属类中全部工件完工时的时间,用GT,Ba来表示；同类工件一起连续加工,工件的完工时间为其本身的完工时间,用GT,Ja来表示．对于这两种模式的排序同题,我们均证明了其NP-hard性并给出了对应的分枝定界算法．     

具有两种运输方式选择的物流排序问题

本文研究了单机环境下,有两种运输方式可供选择的集成生产和运输的排序问题。有多个工件需要在一台机器上进行加工,工件生产完后需要分批运到客户处。有两种运输方式,普通运输和特快运输可供选择。制造商需要安排工件的加工顺序,选择合适的运输方式和出发时间,以极小化相应的时间目标与运输费用的加权和。研究了排序理论中主要的两个目标函数,分析了问题的复杂性,对于这些问题给出了它们的最优算法。     

A branch-and-bound algorithm for a two-machine flowshop scheduling problem with limited waiting time constraints

In this paper, we consider a two-machine flowshop scheduling problem in which the waiting time of each job between the two machines cannot be greater than a certain time period. For the problem with the objective of minimizing makespan, we identify several dominance properties of the problem and develop a branch-and-bound (B&B) algorithm using the dominance properties. Computational tests are performed on randomly generated test problems for evaluation of performance of the B&B algorithm, and results show that the algorithm can solve problems with up to 150 jobs in a reasonable amount of CPU time.     

Multiple lot-sizing decisions in a two-stage production with an interrupted geometric yield and non-rigid demand

In a production system with random yield, it may be more cost effective to release lots multiple times towards fulfilling a customer order. Such a decision, called the multiple lot-sizing problem, has been investigated in various contexts. This paper proposes an efficient algorithm for solving a new multiple lot-sizing problem defined in the context of a two-stage production system with non-rigid demand when its process yields are governed by interrupted geometric distributions. We formulate this problem as a dynamic program (DP) and develop lemmas to solve it. However, solving such a DP may be computationally extensive, particularly for large-scale cases with a high yield. Therefore, this study proposes an efficient algorithm for resolving computational issues. This algorithm is designed to reduce the DP network into a much simpler algorithm by combining a group of DP branches into a single one. Extensive experiments were carried out. Results indicate that the proposed reduction algorithm is quite helpful for practitioners dealing with large-scale cases characterized by high-yield.     

A note on parallel-machine due-window assignment

We consider a due-window assignment problem on identical parallel machines, where the jobs have equal processing times and job-dependent earliness-tardiness costs. We would like to determine a ‘due window’ during which the jobs can be completed at no cost and to obtain a job schedule in which the jobs are penalized if they finish before or after the due window. The objective is to minimize the total earliness and tardiness job penalty, plus the cost associated with the size of the due window. We present an algorithm that can solve this problem in O(n³) time, which is an improvement of the O(n⁴) solution procedure developed by Mosheiov and Sarig.     

Bilevel programming approach applied to the flow shop scheduling problem under fuzziness

This paper presents a fuzzy bilevel programming approach to solve the flow shop scheduling problem. The problem considered here differs from the standard form in that operators are assigned to the machines and imposing a hierarchy of two decision makers with fuzzy processing times. The shop owner considered higher level and assigns the jobs to the machines in order to minimize the flow time while the customer is the lower level and decides on a job schedule in order to minimize the makespan. In this paper, we use the concepts of tolerance membership function at each level to define a fuzzy decision model for generating optimal (satisfactory) solution for bilevel flow shop scheduling problem. A solution algorithm for solving this problem is given. Mathematics Subject Classification: 90C70, 90B36, 90C99     

Integrated scheduling of production and distribution for manufacturers with parallel batching facilities

We consider a class of integrated scheduling problems for manufacturers. The manufacturer processes job orders and delivers products to the customer. The objective is to minimize the service span, that is, the period lasting from the time when the order is received to the time when all the products have been delivered to the customer. In the production phase, parallel batch-processing facilities are used to process the jobs. Jobs have arbitrary sizes and processing times. Each facility has a fixed capacity and jobs are processed in batches with the restriction that the total size of jobs in a batch does not exceed the facility capacity. When all the jobs in a batch are completed, the batch is completed. In the distribution phase, the manufacturer uses a vehicle with a fixed capacity to deliver products. The transportation time from the manufacturer to the customer is a constant. Completed products can be delivered in one transfer if the total size does not exceed the vehicle capacity. We first consider the problem where jobs have the same size and arbitrary processing times. We propose approximation algorithms for the problem and we show that a worst-case ratio performance guarantee is respectively 2–1/m. Then we consider the problem where jobs have the same processing time and arbitrary sizes. An approximation algorithm is proposed with an absolute worst-case ratio of 13/7 and an asymptotic worst-case ratio of 11/9. Both the proposed algorithms can be executed in polynomial time.     

Minimizing mean tardiness subject to unspecified minimum number tardy for a single machine

In this paper we propose a hybrid branch and bound algorithm for solving the problem of minimizing mean tardiness for a single machine problem subject to minimum number of tardy jobs. Although the minimum number of tardy jobs is known, the subset of tardy job is not known. The proposed algorithm uses traditional branch and bound scheme where lower bounds on mean tardiness are calculated coupled with using the information that the number of tardy jobs is known. It also uses an insertion algorithm which determines the optimal mean tardiness once the subset of tardy jobs is specified. An example is solved to illustrate the developed procedure.     

Minimizing makespan on a two-machine re-entrant flowshop

This paper focuses on a two-machine re-entrant flowshop scheduling problem with the objective of minimizing makespan. In the re-entrant flowshop considered here, all jobs must be processed twice on each machine, that is, each job should be processed on machine 1, machine 2 and then machine 1 and machine 2. We develop dominance properties, lower bounds and heuristic algorithms for the problem, and use these to develop a branch and bound algorithm. For evaluation of the performance of the algorithms, computational experiments are performed on randomly generated test problems. Results of the experiments show that the suggested branch and bound algorithm can solve problems with up to 200 jobs in a reasonable amount of CPU time.     

A hybrid two-stage transportation and batch scheduling problem

We study the coordinated scheduling problem of hybrid batch production on a single batching machine and two-stage transportation connecting the production, where there is a crane available in the first-stage transportation that transports jobs from the warehouse to the machine and there is a vehicle available in the second-stage transportation to deliver jobs from the machine to the customer. As the job to be carried out is big and heavy in the steel industry, it is reasonable assumed that both the crane and the vehicle have unit capacity. The batching machine processes a batch of jobs simultaneously. Each batch occur a setup cost. The objective is to minimize the sum of the makespan and the total setup cost. We prove that this problem is strongly NP-hard. A polynomial time algorithm is proposed for a case where the job transportation times are identical on the crane or the vehicle. An efficient heuristic algorithm for the general problem is constructed and its tight worst-case bound is analyzed. In order to further verify the performance of the proposed heuristics, we develop a lower bound on the optimal objective function. Computational experiments show that the heuristic algorithm performs well on randomly generated problem instances.     

On the machine scheduling problem with job delivery coordination

This paper examines two scheduling problems with job delivery coordination, in which each job demands different amount of storage space during transportation. For the first problem, in which jobs are processed on a single machine and delivered by one vehicle to a customer, we present a best possible approximation algorithm with a worst-case ratio arbitrarily close to 3/2. For the second problem, which differs from the first problem in that jobs are processed by two parallel machines, we give an improved algorithm with a worst-case ratio 5/3.     

Setting Job-Shop Due-Dates with Service-Level Constraints

The job-shop due-date assignment problem arises when a manager needs to ‘promise’ a delivery date to a customer. Previous methods yield due-dates which are either optimistic (unlikely to be achieved) or conservative (the promise will be met, but too easily, because the date given was very pessimistic). This paper investigates the due-date assignment problem with a customer ‘service-level’ constraint, the percentage of time that promised delivery dates are honoured. We formulate a rule to attain this service level, yet maintain as short a due-date lead time as possible. Unlike previous attempts, this due-date rule considers not only the job content and instantaneous shop congestion information, but also implicitly incorporates information on how the jobs will be scheduled (or ‘loaded’) once they are in the shop. We simulate a single-machine shop for various measures of performance under several dispatching priorities, comparing our due-date rule with one reported to yield satisfactory performance. Our rule meets all requirements and is found to be superior for most measures of performance.     

Minimizing the number of early jobs on a proportionate flowshop

A proportionate flowshop is a special case of the classical flowshop, where the job processing times are machine-independent. We study the problem of minimizing the number of early jobs in this machine setting. This objective function has hardly been investigated on a single machine, and never on a flowshop. We introduce an efficient iterative solution algorithm. In each iteration, a single job is moved to the first position (and is added to the set of early jobs), and the remaining jobs are rescheduled such that the maximum earliness is minimized. The algorithm guarantees an optimal solution in O(n³) time, where n is the number of jobs.