New process for preparing aqueous solutions of Mo-V-phosphoric heteropoly acids

A new ecofriendly process is proposed for the synthesis of aqueous solutions of Mo-V-phosphoric Keggin heteropoly acids H_{3 + x} PV _x Mo_{12 ? x} O₄₀(HPA_?x ). First, V₂O₅ is dissolved in cooled H₂O₂ to form peroxyvanadium compounds, which then spontaneously decompose to yield the H₆V₁₀O₂₈ solution. The latter is stabilized by the addition of H₃PO₄ to yield an H₉PV₁₄O₄₂ solution. This solution is gradually added to a boiling H₃PO₄ + MoO₃ aqueous suspension. This suspension is gradually evaporated that is followed by dissolution of MoO₃ to produce an HPA_?x solution. This process is reliable and almost non-waste and is promising for preparing HPA_?x solutions with x = 2–6 on pilot and large scales.     

Liquid phase benzylation of toluene using benzyl alcohol over iron promoted sulfated zirconia

Concentrated (0.2 M) aqueous solutions of HP-acids, such as H_3+x+mPV^IV _mV^V _x-mMo_12-xO₄₀ and their analogues with an excess VO²⁺ cation, are oxidized by dioxygen at 343 K and atmospheric pressure through intermediate active complexes (IAC) [H_x+m-1PV^IV _mV^V _x-mMo_12-xO₄₀ ^{4 -}] · [VO²⁺]_y · O₂, where m + y ≥ 3. The electron transfer to the coordinated O₂ molecule inside AC is the limiting stage at high m. At low m, the formation of IAC becomes the limiting stage that results in a sharp decrease in the oxidation rate. This revised version was published online in August 2006 with corrections to the Cover Date.     

Activation-controlled outer-sphere electron transfer reactions: reduction of heteropoly 11-tungstovanadophosphate and heteropoly 10-tungstodivanado phosphate by thiourea in aqueous acid medium

The kinetics of reduction of heteropoly 11-tungstovanadophosphate, [PV^VW₁₁O₄₀]⁴⁻, (HPA1) and heteropoly 10-tungstodivanadophosphate, [PV^VV^VW₁₀O₄₀]⁵⁻, (HPA2) by thiourea has been investigated in HClO₄/phthalate/acetate buffer solutions spectrophotometrically at 25 °C in aqueous medium. The stoichiometry of the reaction is 1:1 in both cases. The HPAs are converted into the corresponding one-electron reduced heteropoly blues, namely, [PV^IVW₁₁O₄₀]⁵⁻ and [PV^IVV^VW₁₀O₄₀]⁶⁻, and thiourea is oxidised to formamidine disulphide. The reaction shows first-order dependence in both [HPA] and [thiourea] at constant pH. The rate–pH profile shows the participation of both the neutral and deprotonated forms of thiourea in the reaction. The reaction proceeds through an outer sphere electron transfer mechanism in which activation-controlled electron transfer is the rate-determining step. Self-exchange rate constants for the couples [PV^VW₁₁O₄₀]⁴⁻/[PV^IVW₁₁O₄₀]⁵⁻, [PV^VV^VW₁₀O₄₀]⁵⁻/[PV^IVV^VW₁₀O₄₀]⁶⁻ and H₂NCSNH₂/H₂NCS^·+NH₂ have been evaluated by Marcus theory.     

Synthesis and Properties of The Solid Solutions Formed in The Fe2V4O13–Cr2V4O13 System

DTA and XRD studies of the Fe₂V₄O₁₃–Cr₂V₄ O₁₃ system have shown that continuous solid solutions of a Fe_2–xCr_xV₄O₁₃ type, bearing a Fe₂ V₄ O₁₃ structure, are formed in the system. With the increasing degree of the Cr3+ ion incorporation into the Fe₂ V₄ O₁₃ structure, a contraction of the solid solution crystal lattice develops. Solid solutions of a Fe_2–x Cr_x V₄ O₁₃ type melt incongruently, their melting temperature increasing from 953 to 1003 K with increase in the degree of the Cr³⁺ ion incorporation. The solid product of melting Fe_2–x Cr_x V₄ O₁₃ solid solutions for 0.2<x >1.2 is the Fe_1–x Cr_x VO₄ solution phase, and for x ≤0.2 and x ≥1.4 – the Fe_1–x Cr_x VO₄ phase as well as FeVO₄ or CrVO₄ , respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Kinetics and mechanism of the wet oxidation of propene to acetone in the presence of Pd2+ ions and Mo-V-phosphoric heteropoly acids ?

Summary Oxidation of propene to acetone in water solutions in the presence of homogeneous catalysts (Pd²⁺ + HPA-x, where HPA-x = H_3+xPV_xMo_12-xO₄₀, x = 1-4) is studied. This reaction is shown to be of the 1st order with respect to C₃H₆ and of the 0.5th order with respect to Pd. The reaction rate does not depend on the concentration of HPA-x and acidity of the catalyst solution. The apparent activation energy of the reaction is 21 kJ/mol. A reaction mechanism is proposed.     

Hydrolytic precipitation of magnesium polyvanadates in vanadium (IV, V) solutions

The phase and chemical composition of precipitates formed in Mg(VO₃)₂-VOSO4-H₂O system at initial pH from 1 to 7 and temperature from 80 to 90°C was studied. Polyvanadates of variable composition Mg _x V _y ⁴⁺V_12-y ⁵⁺¹O_31–δ · nH₂O (0.7 ≤ x ≤ 1.3, 1.2 ≤ y ≤ 2.4, 0.7 ≤ δ = 1.4) were formed at pH from 1 to 4 and V⁴⁺/V⁵⁺ ratio from 0.43 to 9. Compounds with the general formula Mg _x V _y ⁴⁺V_6-y ⁵⁺O_16-δ · nH₂O (0.7 ≤ x ≤ 0.65, y = 1.0, 0.8 ≤ δ ≤ 0.85) were formed at pH from 6.0 to 7.0 and V⁴⁺/V⁵⁺ ratios from 0.11 to 0.25. The maximum V⁴⁺ concentration (y = 2.4) in the precipitates was achieved at the VV⁴⁺/V⁵⁺ solution ratio of 1.0 and pH = 3. The precipitates in solutions with pH 3 were formed only upon addition of VO²⁺ ions with the maximum rate at a V⁴⁺/V⁵⁺ ratio of 0.33. These processes were limited by second-order reactions on the surface of polyvanadates.     

Composition and formation kinetics of strontium polyvanadates in vanadium(IV,V) solutions

The phase and chemical compositions of the precipitates forming in the Sr(VO₃)₂-VOCl₂-H₂O system in the V⁴⁺/V⁵⁺ = 0.11–9 range at 80–90°C are reported. At pH 1–3 and V⁴⁺/V⁵⁺ = 0.25−9, the general formula of the precipitated compounds is Sr _x V _y ⁴⁺ V_12−y ⁵⁺O_31−δ·nH₂)(0.37 ≤ x ≤ 1.0, 1.7 ≤ y ≤ 3.0, 0.95 ≤ δ ≤ 2.1). Polyvanadates containing the largest amount of vanadium(IV) are obtained at an initial V⁴⁺/V⁵⁺ ratio of 9 and pH 1.9. Precipitation from solutions at pH 3 takes place only in the presence of the VO²⁺ ion, and the highest precipitation rate is observed at V⁴⁺/V⁵⁺ = 0.11. The process is controlled by a second-order reaction on the polyvanadate surface. Under hydrothermal conditions at 180°C, Sr_0.25V₂O₅·1.5H₂O nanorods are obtained from solutions with a V⁴⁺/V⁵⁺ molar ratio of 0.1 at pH 3. The nanorods, 30–100 nm in diameter and up to 2–3 μm in length, have a layered structure with an interlayer spacing of 10.53 ± 0.08 ?.     

Transport and thermal characteristics of Cs<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Rb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript>2</Subscript>PO<Subscript>4</Subscript>

The transport and thermal properties of Cs_{1 − x} Rb _x H₂PO₄ in a wide range of compositions were studied. The binary salts Cs_{1 − x} Rb _x H₂PO₄ (x = 0–0.9) contain solid solutions with a structure of CsH₂PO₄. The binary salts were synthesized by mechanically mixing the starting components and growing crystals by isothermal evaporation from aqueous solutions. The properties of Cs_{1 − x} Rb _x H₂PO₄ salts obtained by different procedures were found to differ considerably. At higher rubidium contents in compounds obtained by mechanical mixing, the superionic transition temperature rose insignificantly, the high-temperature phase conductivity decreased twofold, the low-temperature conductivity increased within the limits of the order of magnitude, and the system of hydrogen bonds was slightly weakened. In Cs_{1 − x} Rb _x H₂PO₄ crystals grown from solutions, the temperature of the superionic transition decreased along with its slowing down, and the low-temperature conductivity increased by more than three orders of magnitude because of the higher contents of residual acid aqueous centers in the structure of the salt. These systems are characterized by increased thermal stability.     

Isomorphous substitution of samarium and gadolinium for calcium in hydroxyapatite structure

Isomorphous substitution of samarium and gadolinium for calcium in synthetic hydroxyapatite by the scheme Ca²⁺ + OH⁻ → Ln³⁺ + O²⁻ was studied by X-ray powder diffraction and IR spectroscopy. The homogeneity region of Ca_{10 − x} Ln _x (PO₄)₆(OH)_{2 − x} O _x phases of variable compositions synthesized at 1100°C was found to exist up to x of 1.8 for Sm and 1.4 for Gd. In the heterogeneous region of solid solutions, phases with Ln₃PO₇ and LnPO₄ structures were formed. The structures of some solid solutions were refined by the Rietveld method, which allowed us to establish that the substitution of Ln³⁺ ions for Ca(2) positions is preferred. Changes in the intensities of the absorption bands of stretching and libration vibrations of OH groups are indicative of a partial dehydration of oxyhydroxyapatite. The substitution was shown to decrease Ca(2)-O(OH) and P-O distances and increase Ca(2)-O(1,2,3) distances.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.     

High‐Field Pulsed EPR Spectroscopy for the Speciation of the Reduced [PV2Mo10O40]6− Polyoxometalate Catalyst Used in Electron‐Transfer Oxidations

An in‐depth spectroscopic EPR investigation of a key intermediate, formally notated as [PV^IVV^VMo₁₀O₄₀]^6? and formed in known electron‐transfer and electron‐transfer/oxygen‐transfer reactions catalyzed by H₅PV₂Mo₁₀O₄₀, has been carried out. Pulsed EPR spectroscopy have been utilized: specifically, W‐band electron–electron double resonance (ELDOR)‐detected NMR and two‐dimensional (2D) hyperfine sub‐level correlation (HYSCORE) measurements, which resolved ⁹⁵Mo and ¹⁷O hyperfine interactions, and electron–nuclear double resonance (ENDOR), which gave the weak ⁵¹V and ³¹P interactions. In this way, two paramagnetic species related to [PV^IVV^VMo₁₀O₄₀]^6? were identified. The first species (30–35 %) has a vanadyl (VO²⁺)‐like EPR spectrum and is not situated within the polyoxometalate cluster. Here the VO²⁺ was suggested to be supported on the Keggin cluster and can be represented as an ion pair, [PV^VMo₁₀O₃₉]^8?[V^IVO²⁺]. This species originates from the parent H₅PV₂Mo₁₀O₄₀ in which the vanadium atoms are nearest neighbors and it is suggested that this isomer is more likely to be reactive in electron‐transfer/oxygen‐transfer reaction oxidation reactions. In the second (70–65 %) species, the V^IV remains embedded within the polyoxometalate framework and originates from reduction of distal H₅PV₂Mo₁₀O₄₀ isomers to yield an intact cluster, [PV^IVV^VMo₁₀O₄₀]^6?.     

Correlation between reduction potential of vanadium-containing heteropolyacid (HPA) catalysts and their oxidation activity for cyclohexanol dehydrogenation

Vanadium-containing H_6+xP₂Mo_18−xV_xO₆₂ (x = 0, 1, 2 and 3) Wells-Dawson heteropolyacid (HPA) and H_3+xPMo_12−xV_xO₄₀ (x = 0, 1, 2 and 3) Keggin HPA catalysts were applied to the vapor-phase dehydrogenation of cyclohexanol. The catalytic oxidation activity showed a volcano-shaped curve with respect to vanadium substitution for both families of HPA catalysts. The Wells-Dawson HPA showed a better catalytic oxidation performance than the Keggin HPA at the same level of vanadium substitution.     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Phase relations in the Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>-Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> system from room temperature to melting

Phase relations in the Zn₂V₂O₇-Cu₂V₂O₇ system were studied by high-temperature X-ray diffraction and differential thermal analysis. The major phase constituents of the system are solid solutions based on Zn₂V₂O₇ and Cu₂V₂O₇ polymorphs and their coexistence regions. The generation of α-Zn_{2 − 2x} Cu_2x V₂O₇ solid solution, where 0 ≤ x ≤ 0.30, leaves almost unchanged the stabilization temperature of the high-temperature zinc pyrovanadate phase. The α-Cu_{2 − 2x} Zn_2x V₂O₇ homogeneity range is 5 mol % Zn₂V₂O₇. In the range 0.050 ≤ x ≤ 0.09 from 20 to ∼ 620°C, there is the two-phase field of α-Cu₂V₂O₇ and β-Cu₂V₂O₇ base solid solutions. At still higher temperatures, β-Zn_{2 − 2x} Cu_2x V₂O₇ and α-Cu_{2 − 2x} Zn_2x V₂O₇ coexist in the mixed-phase region. β-Zn_{2 − 2x} Cu_2x V₂O₇ solid solution, where 0 ≤ x ≤ 0.30, exists above 610 ± 5°C. The extent of the β′-Cu₂V₂O₇-base solid solution is 9 to 65 mol % Zn₂V₂O₇ at 615 ± 5°C, expanding to 0 mol % Zn₂V₂O₇ with rising temperature. Original Russian Text ￠ T.I. Krasnenko, M.V. Rotermel’, S.A. Petrova, R.G. Zakharov, O.V. Sivtsova, A.N. Chvanova, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 10, pp. 1755–1762.     

Synthesis and photocatalytic activity of Ti[1 ? x]VxO[2 ? y]Cy whiskers in hydroquinone oxidation in aqueous solutions

Ti_1−x V _x O_2−y C _y (0 ≤ x ≤ 0.10 and x = 0.50) whiskers having the anatase structure were synthesized via thermolysis of vanadium-doped titanium glycolate of composition Ti_1−x V _x (OCH₂CH₂O)₂ (0 ≤ x ≤ 0.10 and x = 0.50). The starting reagents used to prepare Ti_1−x V _x (OCH₂CH₂O)₂ were mixtures of coprecipitated titanium and vanadyl hydroxides, which were heated in ethylene glycol at T ≤ 200°C: (1 − x)TiO(OH)₂ + xVO(OH)₂ + 2HOCH₂CH₂OH = Ti_1−x V _x (OCH₂CH₂O)₂ + 3H₂O↑. Thermolysis of vanadium-doped titanium glycolate in various gas media over a wide range of temperatures is useful to prepare titania samples doped with both vanadium and carbon to form a phase of the general composition Ti_{1 − x} V _x O_{2 − y} C _y whiskers prepared by thermolyzing Ti_{1 − x} V _x (OCH₂CH₂O)₂ in air at 450°C were found to have a high photocatalytic activity in hydroquinone oxidation in aqueous solutions irradiated in the UV spectral range; the photocatalyst’s activity increases with increasing vanadium concentration. When hydroquinone was irradiated in the blue, the maximal catalytic activity was discovered in a sample of composition Ti_0.50V_0.50O_2−y C _y . Quantum-chemical calculations support experimental data that the double doping of titania (Ti_1−x V _x O_2−y C _y ) enhances its photocatalytic activity compared to undoped anatase or anatase doped in one sublattice: Ti_1−x V _x O₂ and TiO_2−y C _y .     

Synthesis of continuous substitutional solid solutions M1?xNix(H2PO4)2 · 2H2O with M = Mg, Mn, Co, or Zn

New continuous substitutional solid solutions Mg_1−x Ni _x (H₂PO₄)₂ · 2H₂O, Mn_1−x Ni _x (H₂PO₄)₂ · 2H₂O, Co_1−x Ni _x (H₂PO₄)₂ · 2H₂O, and Zn_1−x Ni _x (H₂PO₄)₂ · 2H₂O (0 ≤ x ≤ 1.00) crystallizing in monoclinic space group P2₁/n have been synthesized. Their end-member is Ni(H₂PO₄)₂ · 2H₂O. Ni(H₂PO₄)₂ · 2H₂O is isostructural to magnesium, manganese, iron, cobalt, zinc, and cadmium dihydrogenphosphates. The chemical composition and the unit cell parameters have been determined for the solid solutions. Their IR spectra have been measured. Original Russian Text ? V.N. Viter, P.G. Nagornyi, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 1, pp. 19–25.     

Synthesis and Crystal Structure of Two Decavanadates Cluster Metal Complexes: [Co(H2O)6]2[H2V10O28]·6H2O and (NH4)2[Ca(H2O)7]2[V10O28]

Two new decavanadate metal complexes, [Co(H₂O)₆]₂[H₂V₁₀O₂₈]·6H₂O (1) and (NH₄)₂[Ca(H₂O)₇]₂[V₁₀O₂₈] (2), have been synthesized under hydrothermal condition by using chlorhydric acid as the initiator at 120 °C. The aqueous NaVO₃ solution with an aqueous solution of CoCl₂·6H₂O were used for generating 1 and aqueous CaCl₂·2H₂O and NH₄VO₃ solution were employed for creating 2. Compound 1 consisted of discrete hexa-aqua-cobalt [Co(H₂O)₆]²⁺ cations, [H₂V₁₀O₂₈]⁴⁻ anions and non-coordination water molecules. Compound 2 were composed of hepta-aqua-calcium [Ca(H₂O)₇]²⁺ cations, ammonium NH₄ ⁺ and [V₁₀O₂₈]⁶⁻ anion. For compound 2, the distorted pentagonal bipyramid [Ca(H₂O)₇]²⁺ is uncommon. In the crystal lattice, hydrogen bonds played an important role on connecting cations, anions and non-coordinated water molecules to form the three-dimensional network.     

Regenerating Spent Solutions of Vanadium‐containing Heteropoly Acids in the Presence of Additives

Vanadium‐containing heteropoly acid solutions of Keggin H_3+xPMo_12–xV_xO₄₀ and modified H_aP_zMo_yV_xO_b types (P‐Mo‐V HPAs) are promising nanosized inorganic metal‐oxygen cluster compounds with the property of reversible oxidability (V^V ↔ V^IV). The oxidation of reduced P‐Mo‐V HPAs at a temperature of 130–170 °C and an oxygen pressure of 4 atm is a convenient method for their regeneration, but results in regeneration degree of only 75–88 %. Various materials with electron transfer or oxidative properties, such as nitrogen doped carbon nanofibers (N‐CNFs), Sibunit‐4, HNO₃, and MoO₂, were investigated as additives to facilitate and accelerate the regeneration of HPA solutions. Among the studied additives HNO₃ was found to show the best efficiency, resulting in regeneration degree of higher 95 %. Rapid and efficient regeneration of spent HPA catalysts is an important criterion for achieving high productivity and sustainability of oxidative processes on their basis.     

Isopiestic Measurement of the Osmotic Coefficients of Aqueous {xH 2 SO 4 + (1− x)Fe 2 (SO 4 ) 3 } Solutions at 298.15 and 323.15 K

This study measures the osmotic coefficients of {xH₂SO₄ + (1−x)Fe₂(SO₄)₃}(aq) solutions at 298.15 and 323.15 K that have ionic strengths as great as 19.3 mol,kg⁻¹, using the isopiestic method. Experiments utilized both aqueous NaCl and H₂SO₄ as reference solutions. Equilibrium values of the osmotic coefficient obtained using the two different reference solutions were in satisfactory internal agreement. The solutions follow generally the Zdanovskii empirical linear relationship and yield values of a _w for the Fe₂(SO₄)₃–H₂O binary system at 298.15 K that are in good agreement with recent work and are consistent with other M₂(SO₄)₃–H₂O binary systems.     

Mössbauer study of the FeV2O4---Fe3O4 system

Mössbauer spectra of the Fe_1+xV_2−xO₄ spinel solid solutions are taken to investigate the cation distribution. Room temperature spectra can be interpreted by assuming that the cation distribution is represented approximately as Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄ for 0 x 0.35 and Fe³⁺[Fe²⁺Fe³⁺_x−1V³⁺_2−x]O₄ for 1 x 2 and the ionic valence arrangement changes from the 2-3-3 type (Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄) to the 3-2-3 one (Fe³⁺[Fe²⁺V³⁺]O₄) in the range 0.35 x 1. Fe₂VO₄ is found to be 3-2-3 spinel, Fe³⁺[Fe²⁺V³⁺]O₄. Its paramagnetic spectrum at 473°K is, however, composed of a broad single line with isomer shift value of 0.61 mm/sec relative to stainless steel, in which the line splitting due to the ferric and ferrous ions is rendered indistinguishable.