Gold nanoparticles produced in a microalga

An efficient biological route to production of gold nanoparticles which allows the nanoparticles to be easily recovered remains elusive. Live cells of the green microalga Chlorella vulgaris were incubated with a solution of gold chloride and harvested by centrifugation. Nanoparticles inside intact cells were identified by transmission electron microscopy and confirmed to be metallic gold by synchrotron based X-ray powder diffraction and X-ray absorption spectroscopy. These intracellular gold nanoparticles were 40–60 nm in diameter. At a concentration of 1.4% Au in the alga, a better than 97% recovery of the gold from solution was achieved. A maximum of 4.2% Au in the alga was obtained. Exposure of C. vulgaris to solutions containing dissolved salts of palladium, ruthenium, and rhodium also resulted in the production of the corresponding nanoparticles within the cells. These were surmised to be also metallic, but were produced at a much lower intracellular concentration than achieved with gold. Iridium was apparently toxic to the alga. No nanoparticles were observed using platinum solutions. C. vulgaris provides a possible route to large scale production of gold nanoparticles.     

Direct observation of ferromagnetic spin polarization in gold nanoparticles

We report the first direct observation of ferromagnetic spin polarization of Au nanoparticles with a mean diameter of 1.9 nm using x-ray magnetic circular dichroism (XMCD). Owing to the element selectivity of XMCD, only the gold magnetization is explored. Magnetization of gold atoms as estimated by XMCD shows a good agreement with results obtained by conventional magnetometry. This evidences intrinsic spin polarization in nanosized gold.     

On the formation of protected gold nanoparticles from AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> by the reduction using aromatic amines

Amines are used extensively as reductants and subsequent capping agents in the synthesis of metal nanoparticles, especially gold, due to its affinity to nitrogen. Taking 2-methyl aniline as an example, we show that metal reduction is followed by polymerization of the amine, while part of it covers the nanoparticle surface another fraction deposits in the solution. It is found that the oxidative polymerization of the amine goes in step with the formation of gold nanoparticles. The gold nanoparticles thus formed have a mean diameter of 20 nm. The polymerized amine encapsulates the gold nanoparticle forming a robust shell of about 5 nm thickness, making the gold core inert towards mineralizing agents such as chloroform, bromoform, sodium cyanide, benzylchloride, etc. which react with the naked gold nanoparticles. The deposited polymer is largely protonated, taking up protons from the medium during its formation. Similar results have been observed in the case of aniline also. The materials have been fully characterized by spectroscopy and microscopy.This revised version was published online in August 2005 with a corrected issue number.     

Self-assembled gold nanochains hybrid based on insulin fibrils

We reported a facile method for preparing self-assembly gold nanochains by using insulin fibrils as biotemplate in aqueous environment. The gold nanochains hybrid nanostructures, which are insulin fibrils coated by gold nanoparticles, can be fabricated by simply reducing the salt precursors using DMAB. By increasing the molar ratio between salt precursors and insulin, denser hybrid nanochains can be obtained, meanwhile the mean diameter of gold nanoparticles is changing from 8 to 10 nm and then to 12 nm. The fabricated gold nanochains hybrid had helix structure, which was confirmed by circular dichroism spectra. The hybrid nanostructures were also investigated by transmission electron microscope, atomic force microscope, Fourier transform infrared spectra, and UV–Visible spectroscopy. As the wire-like structure become denser, the suspensions show color-changing, corresponding to the surface plasmon resonance red shift, which is attributed to the increasing mean size of nanoparticles. Based on the characterizations, a hypothetic mechanism was suggested to describe the formation processing of hybrid gold nanochains.     

New, fast and green procedure for the synthesis of gold nanoparticles based on sonocatalysis

An easy, cheap and green synthetic route, using high-power ultrasounds and sodium citrate dihydrate as non-toxic reducing and stabilizer agent, produces gold nanoparticles in aqueous solution, and at ambient conditions. The time required for the synthesis is 5.5 min. The spherical nanoparticles obtained by this route show a homogeneous size distribution, within the range 5-17 nm, with an average diameter of 10±1 nm. Moreover, 90% of the particles have a diameter ranging from 7 to 13 nm, and their half-life is more than 30 days. The gold nanoparticles synthesized following this route are known as sononanoparticles. Gold sononanoparticles have been characterized by TEM and XRD and their stability has been studied by UV-Vis spectroscopy. Alternative experimental designs are compared to optimize the proposed synthesis procedure.     

Core-shell structured iron nanoparticles well dispersed on montmorillonite

Iron nanoparticles have been successfully synthesized using sodium borohydride solution reduction of ferric trichloride hexahydrate in the presence of montmorillonite as an effective protective reagent and support as well. A combination of characterizations reveals the well disperse of these obtained iron nanoparticles supported on the external surface of clay with roughly spherical morphology and mean diameter of 55 nm. The particles are oxidation resistant well with iron core-iron oxide shell structure. The shell thickness of 3 nm remains almost invariable under ambient conditions. Discernable hysteresis loop reveals ferromagnetic behavior of the iron nanoparticles, which make them easy for magnetic separation and potential in some practical applications.     

Preparation of gold tetrananocages and their photothermal effect

A gold tetrahedral nanocage, i.e., a tetrananocage, that converts near-infrared （NIR） light into heat was fabricated by using a simple method. Silver tetrahedra with good homogeneity and dispersity were synthesized by a hydrothermal route. Gold tetrananocages were obtained using a galvanic replacement reaction between Ag tetrahedra and HAuC14 solution. The surface plasmon resonance （SPR） of gold tetrananocages was tuned from 412 nm to 850 nm through controlling the volume of HAuC14 solution added. This Au tetrananocage can effectively convert NIR light into heat when the SPR couples with the exciting light. When cancer cells are cultured with the gold tetrananocages for several hours and irradiated, the gold tetrananocages destroy the cancer cells effectively and demonstrate themselves to be a good candidate for combating cancer.     

Solution-combusting preparation of mono-dispersed Mn3O4 nanoparticles for electrochemical applications

Manganese oxide (Mn₃O₄) nanoparticles with average diameter of 15 nm were prepared using alcohol solution of manganese chloride as starting material via a facile solution-combusting method. The flame core zone was chosen to prepare mono-dispersed and high crystalline products, which were employed to modify glassy carbon electrode and detect dopamine via cyclic voltammetry. The results exhibited excellent electrochemical sensitivity. A linear relationship between the concentration of dopamine and its oxidation peak current was obtained by differential pulse voltammetry, which will find wide application in the biological detection.     

Facile fabrication and optical properties of novel Pb(OH)Cl nanotubes

Uniform Pb(OH)Cl nanotubes were synthesized for the first time through a reverse micelles system. The system was consisting of C₁₂E₉ as a surfactant, n-pentanol as a cosurfactant, hexamethylene as the continuous oil phase and lead acetate or sodium chloride solution as the dispersed aqueous phase. The obtained Pb(OH)Cl nanotubes have an average outer diameter of 60 nm, inner diameter of about 40 nm, and an length up to 3 μm as TEM picture showed. And the range of the nanotube diameter is from 50 nm to 70 nm. XRD result indicated that Pb(OH)Cl crystallized in an orthorhombic phase. Photoluminescent (PL) spectrum showed that the product emit in near ultraviolet region and visible region at 335 nm and 439 nm respectively. The experimental results show that reaction temperature have effect on the shape of Pb(OH)Cl nanotubes. A possible formation mechanism was also discussed.     

Nanocylinder-array structure greatly increases the soft X-ray intensity generated from femtosecond-laser-produced plasma

In order to increase the soft X-ray conversion efficiency for the femtosecond-laser-produced plasma, we adopted a nanocylinder-array structure target. Gold nanocylinder-array targets with 70–90 nm cylinder diameter and 100 nm cylinder pitch were made. A continuous smooth soft X-ray spectrum adequate for X-ray absorption spectroscopy was obtained. An around 20-fold soft X-ray (7–20 nm) fluence enhancement compared with a flat-surface gold foil target was obtained when the cylinder height was 18 μm. X-ray (>0.06 keV) pulse duration was 17 ps, which is much shorter than that obtained by using the pre-pulse technique. The X-ray pulse peak intensity was 7-fold higher than that of a gold foil target. Received: 2 May 2001 / Revised version: 1 June 2001 / Published online: 18 July 2001     

Gold nanosphere propulsion by using femtosecond laser-excited enhanced near field

We propose nanosphere propulsion by using femtosecond laser-excited enhanced near field based on the theoretical calculations and experimental study. The optical intensity distribution and enhancement around a gold nanosphere on a silicon substrate was simulated by a 3D finite-difference time-domain method. The sphere velocities and propelled angles were calculated based on the optical intensity distribution. In our simulation, we calculated the optical intensity for the gold nanospheres with a diameter ranging from 100 to 600 nm. Calculation results show that the sphere velocity was fairly constant for the diameters ranging from 100 to 250 nm, while the velocity decreased for diameters larger than 250 nm. The propelled angle could be controlled up to only 4.6° by varying the incident angles of p-polarized waves. We have demonstrated the gold nanosphere propulsion in experiment. The gold nanospheres with a diameter of 200 nm were used in our experiments. The propelled gold particles have been melted by laser irradiation and deposited on the receiver substrate. The size and spatial distributions of gold particles have been investigated. The decrease in the laser spot size and the gap distance between the donor and receiver substrate would realize the reduction in the existence region of gold particles on the receiver substrate.     

Comparative study of ethanol sensor based on gold nanoparticles: ZnO nanostructure and gold: ZnO nanostructure

Gold colloid:ZnO nanostructures were prepared from Zn powder by using thermal oxidation technique on alumina substrates, then it was impregnated by gold colloid for comparative study. The gold colloid is the solution prepared by chemical reduction technique; it appeared red color for gold nanoparticle solution and yellow color for gold solution. The heating temperature and sintering time of thermal oxidation were 700 °C and 24 h, respectively under oxygen atmosphere. The structural characteristics of gold colloid:ZnO nanostructures and pure ZnO nanostructures were studied using filed emission scanning electron microscope (FE-SEM). From FE-SEM images, the diameter and length of gold colloid:ZnO nanostructures and ZnO nanostructures were in the ranges of 100-500 nm and 2.0-7.0 μm, respectively. The ethanol sensing characteristics of gold colloid:ZnO nanostructures and ZnO nanostructures were observed from the resistance alteration under ethanol vapor atmosphere at concentrations of 50, 100, 200, 500, and 1000 ppm with the operating temperature of 260-360 °C. It was found that the sensitivity of sensor depends on the operating temperature and ethanol vapor concentrations. The sensitivity of gold colloid:ZnO nanostructures were improved with comparative pure ZnO nanostructures, while the optimum operating temperature was 300 °C. The mechanism analysis of sensor revealed that the oxygen species on the surface was O²⁻.     

Colorimetric detection of ssDNA in a solution

A solution containing ssDNA was detected by using colloidal gold nanoparticles upon a color change of solution. First of all, we prepared colloidal gold nanoparticles with a size of less than 20 nm by means of citrate reduction of HAuCl₄. Since colloidal gold nanoparticles modified with citrate anions have a negative charge, they are very well dispersed in the solution due to the negative charge repulsion, showing red color. If the electrostatic repulsion is screened by additives such as NaCl, the nanoparticles start to aggregate, leading to a color alteration. We found that the color alteration is retarded when the solution contains ssDNA, which plays a role in preventing the nanoparticles from aggregation. This allows the determination of whether or not ssDNA is present in a solution. However, the color alteration is not retarded when the solution contains dsDNA.     

空心微球结构Au/Ag合金泡沫块体的制备

将平均晶粒尺寸为4.6 nm的金粒子通过静电作用粘附于聚苯乙烯（PS）微球表面用于化学镀,化学镀金后PS表面的金沉积层几乎达到完全包覆,厚度70~90 nm;在Au/PS表面进行化学镀银,沉积的银颗粒堆积紧密,颗粒大小较先前沉积的金颗粒大,镀覆层厚度增厚至200~400 nm;模板去除后,获得了完全自支撑的Au40Ag60空心微球结构的圆柱状泡沫材料。制备的金银合金泡沫由直径约10 m的空心球壳组成,圆柱体直径约5 mm,密度约1.2 g/cm3。     

金纳米空心半球壳膜的可调谐光学性质研究

以单层聚苯乙烯微球阵列为模板,通过控制其表面金膜蒸镀时间,制备了具有不同厚度的空心半球壳结构的金纳米膜.利用扫描电子显微镜和自制光谱仪分别测量了金膜表面形貌和其透射光谱,并分析了金膜形貌与其光学性质间的关系,同时以4-巯基苯胺为探针分子测定了金膜的表面增强喇曼散射效应.结果表明,该金纳米膜的表面等离子体共振波长随膜厚度增大而发生红移,在可见与近红外波段较宽范围内可调谐,并且,当金膜共振波长与入射激发光波长较近时,探针分子可产生出较强的表面增强喇曼信号.同时,对该现象的产生机制也进行了理论解释.     

Silicon nanowires synthesized by vapor–liquid–solid growth on excimer laser annealed thin gold film

The fabrication of Si nanowires has been demonstrated using excimer laser annealed thin gold film as the catalyst and vapor–liquid–solid (VLS) growth. Au nanoparticles with mean diameters of 12, 13 and 15 nm were formed by excimer laser annealing (ELA) of Au film with thickness of 2.5, 5 and 10 nm, respectively. The results show that the silicon nanowires (SiNWs) with desired diameter can be obtained by controlling the Au film thickness and laser power density.     

Preparation of Gold/triblock Copolymer Composite Nanoparticles

A kind of novel gold (Au)/hydroxylated poly (styrene-b-butadiene-b-styrene) triblock copolymer (HO-SBS) composite nanoparticles was synthesized by reduction of tetrachloroaurate ions in HO-SBS micelle. The Au–HO-SBS composite nanoparticles are composed by gold core about 35 nm in diameter and polymer shell about 7 nm in thickness. Formation of the Au/HO-SBS nanoparticles is indentified by infrared (IR) and UV-visible absorption spectroscopies. Transmission electron microscopy (TEM) result shows that the composite nanoparticles tend to aggregate into an ordered hexagonal array on carbon-coated grid.     

Fabrication of a nanostructured gold-polymer composite material

A facile synthesis route is described for the preparation of a poly-(o-aminophenol)-gold nanoparticle composite material by polymerization of o-aminophenol (AP) monomer using HAuCl₄ as the oxidant. The synthesis was carried out in a methanol medium so that it could serve a dual solvent role, a solvent for both the AP and the water solution of HAuCl₄. It was found that oxidative polymerization of AP leads to the formation of poly-AP with a diameter of 50±10nm, while the reduction of AuCl₄ ^- results in the formation of gold nanoparticles (∼ 2nm). The gold nanoparticles were uniformly dispersed and highly stabilized throughout the macromolecular chain that formed a uniform metal-polymer composite material. The resultant composite material was characterized by means of different techniques, such as UV-vis, IR and Raman spectroscopy, which offered the information about the chemical structure of polymer, whereas electron microscopy images provided information regarding the morphology of the composite material and the distribution of the metal particles in the composite material.     

憎水性金属纳米粒子及其LB膜的制备与光谱表征

用油酸钠和十四烷基硫醇作为稳定剂,制备了高度单分散的疏水性银和金纳米溶胶。考察了单粒子层的π－Ａ曲线并建造了纳米粒子的ＬＢ膜。通过紫外可见光谱讨论了纳米粒子的分散状态,由红外光谱结果讨论了纳米粒子表面有机吸附层的状态。     

金纳米粒子掺杂DNA-CTMA-DPFP薄膜的表面增强拉曼散射特性

采用柠檬酸三钠还原氯金酸和离子交换法制备金纳米粒子掺杂DNA-CTMA材料,利用钯催化反应合成9,9-二乙基-2,7-二-(4-吡啶)芴荧光染料(DPFP),将DPFP与DNA-CTMA混合后,旋凃制备金纳米粒子掺杂的DNA-CTMA-DPFP薄膜样品。通过吸收光谱、荧光光谱和拉曼光谱的测量,研究了薄膜样品的光学特性和表面增强拉曼散射(SERS)特性。实验结果表明,薄膜样品在300～360 nm的吸收主要来自DPFP,在500～700 nm的吸收来自样品中金纳米粒子的局域表面等离子共振;样品在370,386,408 nm处的荧光峰分别对应DPFP的S₁₀-S₀₀、S₁₀-S₀₁和S₁₀-S₀₂能级的电子振动跃迁;在785 nm激光激发下,薄膜样品的拉曼散射主要来自DPFP分子,随着金纳米粒子掺杂比的增大,DPFP分子的拉曼散射峰强度逐渐增强。因此,金纳米粒子掺杂DNA-CTMA薄膜适合作为多种染料分子的SERS基底。