Spectral properties of Nd<Superscript>3+</Superscript> ions in samples of transparent Y<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramics

The spectral and luminescent characteristics of samples of Y₂O₃:Nd³⁺ ceramics obtained from different precursors under different preparation conditions (the concentration of an HfO₂ compacting additive, the temperature and time of synthesis) are studied at 300 and 77 K. It is shown that the spectral positions of absorption and luminescence lines of ceramics correspond to those of a Y₂O₃:Nd³⁺ single crystal. At the same time, the absorption and luminescence spectra show an inhomogeneous broadening, characteristic of disordered crystals and glass. The energies of the ⁴ I _9/2 and ⁴ F _3/2 Stark states of the Nd³⁺ ion are calculated. The calculation results nearly coincide with the data from the literature for the Y₂O₃:Nd³⁺ single crystal and transparent ceramics. Samples containing the compacting additive show additional lines, whose intensities correlate with its concentration and the method of preparation of Y₂O₃:Nd³⁺ ultradispersed powders. It is assumed that these lines are related to the fact that either Nd³⁺ ions enter the composition of the HfO₂ compacting additive or Hf⁴⁺ ions are present in the nearest environment of Nd³⁺ ions at the boundaries of granules enriched with HfO₂.     

Luminescence properties of transparent ceramics Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Yb

We present the results of studying the luminescence properties of transparent ceramics Y₃Al₅O₁₂:Yb obtained by the vacuum sintering and nanocrystalline technology. In the course of research, we measured the luminescence and luminescence excitation spectra, as well as the temperature and kinetic behavior of luminescence. Our results are analyzed in comparison with the characteristics of corresponding single crystals. We revealed that processes of generation and relaxation of electronic excitations that occur in ceramics, in particular, in the charge transfer state, are similar to processes occurring in crystals. The behavior of two charge-transfer luminescence bands at 340 and 490 nm is studied. In the range 300–600 nm, we revealed a broad emission band of radiation of other type, which is also observed in spectra of undoped ceramics. This broad band is attributed to F⁺ centers. Emission and excitation spectra of charge transfer luminescence at a maximum of the temperature dependence of 100 K are measured for the first time. We found that, upon excitation in the charge transfer band, luminescence in ceramics is more intense than in single crystals with similar concentrations of Yb and has a higher quenching temperature.     

Preparation and properties of Fe and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in ZrO<Subscript>2</Subscript> matrix

Iron and magnetite nanoparticles in zirconium oxide matrix have been prepared by a heat treatment of a mixture of nanocrystalline iron oxide and zirconium oxide or zirconium hydride powders. Changes in the phase composition of the as-mixed powders during annealing in vacuum or in hydrogen were monitored using thermomagnetic curves. Structure and phase composition of the final products were characterized by X-ray powder diffraction and ⁵⁷Fe Mössbauer spectroscopy. Influence of the composition of the original mixture and quality of the annealing atmosphere on the final properties of the composites are discussed.     

Transport characteristics of phonons and the specific heat of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:ZrO<Subscript>2</Subscript> solid solution single crystals

The temperature dependences of the specific heat and transport characteristics of phonons in single crystals of yttrium-stabilized zirconium dioxide Y₂O₃:ZrO₂ solid solutions have been studied. It has been shown that the temperature dependences of the specific heat at T > 5 K are almost identical at the degree of stabilization of a solid solution with an Y₂O₃ content of 5–20 mol %. Differences in the temperature dependences of the specific heat of samples from different sources at T < 5 K are due to the presence of low-energy two-level systems. The features of the transport characteristics of thermal phonons at liquid helium temperatures reflect not only the presence of two-level systems but also the scattering of phonons on low-dimensional domains of another phase coherently conjugate to the main phase of the Y₂O₃:ZrO₂ solid solution.     

A study of the structure and properties of nanostructured ZrO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite powders

The correlation between temperature treatment conditions and the ratio of components in nanostructured fibrous powders with a composition of ZrO₂-Y₂O₃-Al₂O₃ and their porous crystal structure and physicochemical properties is studied. The dependences of the ratio between zirconia tetragonal and monoclynic phases on the treatment temperature and the alumina content are found to have a nonmonotonic character. The growth of zirconia crystallite size is suppressed by introduced nanocrystalline alumina in a temperature range of 600–1200°C, which is caused by the processes of ternary solid solution formation. The bulk and picnometric density values of materials are proportional to the temperature of heat treatment. The temperature dependence of the specific surface and the size of oxide grain particles has an inversely proportional character. With increasing alumina content in the powders, the specific surface increases, while the picnometric and bulk densities decrease.     

Luminescence excitation in reactive molecular CO + O<Subscript>2</Subscript> collisions on the surface of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Eu

It is shown that the CO + O₂ → CO₂ catalytic reaction on the surface of Y₂O₃-Eu may lead to electronic excitation of Eu³⁺ luminescence centers due to the chemical energy release. The luminescence observed allows one to study the interaction between molecular particles of ultralow (thermal) energies with surface by optical methods.     

High-temperature conductivity and structure of Y<Subscript>2</Subscript>(WO<Subscript>4</Subscript>)<Subscript>3</Subscript> ceramics

The magnitude and character of conductivity were studied for Y₂(WO₄)₃ ceramics synthesized by the ceramic (from oxides) and organic-nitrate procedures. Investigation of the dependence \(\sigma \left( {{\alpha _{{o_2}}}} \right)\) and measurements of the ion transport numbers of charge carriers by the EMF method showed that Y₂(WO₄)₃ is basically an ion conductor. The conductivity is largely determined by the sample preparation conditions related to the dependence of the specific surface area and powder grain size on the synthetic procedure. The maximum high-temperature conductivity of Y₂(WO₄)₃ was 2.51 × 10^–4 S/cm, which roughly corresponds to the conductivities of Sc₂(WO₄)₃ and In₂(WO₄)₃ measured under the same conditions. It was confirmed that Y₂(WO₄)₃ crystallizes as a mixed monoclinic-orthorhombic structure at 1000°C. The character of water incorporation in hydrated Y₂(WO₄)₃ crystals was studied by thermogravimetry and diffuse reflectance IR spectroscopy. A qualitative model of water intercalation was suggested.     

Sensitizer-dependent up-conversion of Ho<Superscript>3+</Superscript> in nanocrystalline Y<Subscript>2</Subscript>O<Subscript>3</Subscript>

Ho³⁺–Yb³⁺ co-doped Y₂O₃ nanocrystals were synthesized by firing hydroxy carbonate precursors. Yb³⁺-concentration-dependent up-conversion properties of Ho³⁺ in Y₂O₃ nanocrystals have been investigated. The relative intensity of up-converted red emission increases more quickly than that of the green and the near-infrared ones with the enhancement of the concentration of Yb³⁺. It is believed that the energy process ⁵ S ₂ (⁵F₄) (Ho) + ⁵ I ₇ (Ho) →⁵ I ₆ (Ho)+⁵ F ₅ (Ho) plays an important role in the population of the ⁵ F ₅ level of Ho³⁺. The result indicates that the intensity ratio of the green emission to the red one can be tuned by changing the sensitizer concentration. PACS 78.55.-m     

Ground-state measurement of Pr<Superscript>3+</Superscript> in Y<Subscript>2</Subscript>O<Subscript>3</Subscript> by photoconductivity

1 at % Pr³⁺-doped Y₂O₃ single-crystal fibers were prepared using a laser-heated pedestal growth method. The emission and excitation spectra of the fibers were measured. The emissions of 4f-4f transitions from ¹ D ₂ to the ³ H ₄ and ³ H ₅ states are found at 620 and 720 nm, respectively. The ³ P ₂, ³ P ₁, ¹ I ₆, and ³ P ₀ 4f-4f absorptions are observed at 456, 472, 482, and 492 nm, respectively. A 4f-5d absorption band is detected at 288 nm. Photoconductivity measurements show that the 4f-5f transition of Pr³⁺ around 285 nm produces a direct photocurrent. Taking the onset of photocurrent to be at 320 nm, the ground state of Pr³⁺ is determined at 1.7 eV above the valence band of the host. The text was submitted by the authors in English.     

Photolumiscent Properties of Nanorods and Nanoplates Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript>

Nanorods and nanoplates of Y₂O₃:Eu³⁺ powders were synthesized through the thermal decomposition of the Y(OH)₃ precursors using a microwave-hydrothermal method in a very short reaction time. These powders were analyzed by X-ray diffraction, field emission scanning electron microscopy, Fourrier transform Raman, as well as photoluminescence measurements. Based on these results, these materials presented nanoplates and nanorods morphologies. The broad emission band between 300 and 440 nm ascribed to the photoluminescence of Y₂O₃ matrix shifts as the procedure used in the microwave-hydrothermal assisted method changes in the Y₂O₃:Eu³⁺ samples. The presence of Eu³⁺ and the hydrothermal treatment time are responsible for the band shifts in Y₂O₃:Eu³⁺ powders, since in the pure Y₂O₃ matrix this behavior was not observed. Y₂O₃:Eu³⁺ powders also show the characteristic Eu³⁺ emission lines at 580, 591, 610, 651 and 695 nm, when excited at 393 nm. The most intense band at 610 nm is responsible for the Eu³⁺ red emission in these materials, and the Eu³⁺ lifetime for this transition presented a slight increase as the time used in the microwave-hydrothermal assisted method increases.     

Mechanism of propagation of the combustion front in a Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + 2Al + 30% Al<Subscript>2</Subscript>O<Subscript>3</Subscript> mixture

The results of experiments on the combustion of a powdery Fe₂O₃-Al-Al₂O₃ mixture in an argon flow are reported. The process of combustion is perturbed by a pressure drop across the batch created by evacuating one of the end faces of the reaction cell. The effects of gasifiable additives (borax and soda) and a pressure drop on the combustion characteristics are studied. The results obtained are interpreted within the framework of the convection-conduction theory of combustion of heterogeneous condensed systems.     

Effect of porosity and pore morphology on the low-frequency dielectric response in sintered ZrO<Subscript>2</Subscript>—8 mol% Y<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramic compact

Effect of porosity and pore size distribution on the low-frequency dielectric response, in the range 0.01–100 kHz, in sintered ZrO₂—8 mol% Y₂O₃ ceramic compacts have been investigated. Small-angle neutron scattering (SANS) technique has been employed to obtain the pore characteristics like pore size distribution, specific surface area etc. It has been observed that the real and the imaginary parts of the complex dielectric permittivity, for the specimens, depend not only on the porosity but also on the pore size distribution and pore morphology significantly. Unlike normal Debye relaxation process, where the loss tangent vis-à-vis the imaginary part of the dielectric constant shows a pronounced peak, in the present case the same increases at lower frequency region and an anomalous non-Debye type relaxation process manifests.     

Correction of the band gap of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> phosphor

Submicron samples of Y₂O₃:Eu³⁺ phosphor with elevated photoluminescence (PL) efficiency and activator concentration of 9 at % obtained by the sol–gel method were investigated by diffuse reflection spectroscopy and PL spectroscopy. It is found that the diffuse reflection spectrum in the vicinity of the fundamental absorption edge (<300 nm) is distorted by the superposition of the PL of Eu³⁺ ions, as a result of which the calculated value of optical band gap E _g of the Y₂O₃ matrix is overestimated. An algorithm for eliminating the PL influence on the absorption edge is proposed, and the correct E _g values are found to be 4.61 ± 0.12 and 4.50 ± 0.12 eV for annealing at 700 and 1300°C, respectively.     

Spontaneous luminescence of Eu<Superscript>3+</Superscript> ions in porous Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanospheres

A study of the luminescence of Eu³⁺ ions in Y₂O₃ nanospheres indicates a significant influence of the porous structure of nanoparticles on the luminescence of dopant ions. It is shown that filling the nanopores of initially porous Y₂O₃ nanospheres shortens the decay time of the spontaneous luminescence of doping europium ions. The change in the decay time is associated with the change in the effective refractive index of the porous nanospheres.     

Conductivity of nanostructured India oxide films containing Co<Subscript>3</Subscript>O<Subscript>4</Subscript> or ZrO<Subscript>2</Subscript>

The effect of additives of cobalt and zirconium oxides on the conductivity of nanostructured composites based on indium oxide is studied. It is shown that addition of up to 20 wt % ZrO₂ to In₂O₃ leads to a sharp decrease in the conductivity of the composite. For the Co₃O₄?In₂O₃ system, the conductivity decreases up to a Co₃O₄ content of 60 wt %, after which it increases. At a Co₃O₄ content in the Co₃O₄?In₂O₃ system of up to 60 wt %, n-type conduction takes place, changing to p-type at 80 to 100 wt % Co₃O₄. Zirconium oxide exhibits practically no n-type conduction, so electric current in the ZrO₂?In₂O₃ system flows through In₂O₃ nanocrystals, i.e., n-type conduction takes place. Possible causes of the observed effects are considered.     

Optical and fluorescent properties of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> sol–gel planar waveguides containing Tb<Superscript>3+</Superscript> doped nanocrystals

Terbium doped Y₂O₃ planar waveguides were fabricated by sol–gel process and dip-coating using yttrium acetate as precursor. Two different doping modes were compared, i.e. introduction in the sol of dispersed Tb³⁺ions from dissolved Tb(NO₃)₃, or of nanoparticles of Tb₂O₃ or [Y₂O₃:50% Tb] from an alcoholic suspension. The chemical and nanostructural properties were analyzed by infrared spectroscopy, transmission electron microscopy and X-ray diffraction. The Tb³⁺ fluorescence properties were studied as a function of temperature and atmosphere of the thermal treatments, and of the Tb³⁺ concentration. The fluorescence properties are discussed in relation to the quenching mechanisms induced by Tb⁴⁺ transformation, residual OH groups, and crystallites size and structure. Optical propagation losses of the Tb doped Y₂O₃ planar waveguides related to the doping modes and Tb³⁺ concentration are presented. Doping sol–gel films by nanoparticles is shown to be a valuable alternative to the conventional doping from dissolved terbium salt. PACS 81.21.Fw; 84.40.Az; 78.67.Bf     

Spectral characteristics of a Yb-doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramic laser

We report the experimental observation of random wavelength emission and intensity-dependent central-wavelength shift in a diode-pumped Yb³⁺-doped Y₂O₃ ceramic laser. We show experimentally that, like conventional lasers, the emission of the laser has fixed well-defined transverse modes; however, its instantaneous emission wavelengths change randomly with time. The central wavelength of the laser emission also shifts with the intracavity light intensity. A model was developed to describe the spectral behavior of Yb³⁺-doped lasers. We show that the observed random wavelength emission and central lasing wavelength shift of the laser could be well explained based on the strong reabsorption of light in the gain medium. PACS 42.55.Rz; 42.60.Mi; 42.55.Xi     

Flame-synthesized Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Tb<Superscript>3+</Superscript> nanocrystals as spectral converting materials

In flame spray pyrolysis (FSP), the generation of uniform nanoparticles can be quite challenging due to difficulties in controlling droplet sizes during liquid spraying and uneven flame temperature. Here, we report a method to produce relatively uniform nanocrystals of a Tb³⁺ doped Y₂O₃ phosphor. In ethanol, metal nitrate precursors were simply mixed with organic surfactants to form a homogeneous solution which was then subjected to FSP. Depending on relative concentrations of the surfactant (oleic acid) to the metal precursors (yttrium and terbium nitrates), different sizes and morphologies of Y₂O₃:Tb³⁺ particles were obtained. By adjusting the surfactant concentration, Y₂O₃:Tb³⁺ crystals as small as 20~25 nm were acquired. X-ray diffraction and transmittance electron microscopy were used to prove that as-synthesized nanoparticles were highly crystalline due to the high temperature of FSP. X-ray photoelectron spectroscopy revealed that terbium dopants were well distributed throughout Y₂O₃ particles and a small portion of carbonate impurities were remained on the surface of particles, presumably originated from incomplete combustion of the organic surfactants. Photoluminescence (PL) spectra of Y₂O₃:Tb³⁺ nanocrystals exhibited a green light emission ensuring that the terbium doping was successfully occurred. However, when post-annealing was performed on the nanocrystals, their PL was dramatically enhanced indicating that quenching centers such as carbonate impurities and surface defects may have been removed by the annealing process. Owing to the continuous processability of FSP, this current method can be a practical way to produce nanoparticles in a large quantity. The obtained Y₂O₃:Tb³⁺ nanocrystals were used to fabricate a transparent film with poly-ethylene-co-vinyl acetate (poly-EVA) polymer, which was suitable for a spectral converting layer for a solar cell.

Open image in new window

Graphical abstract ?

     

The transport and thermal properties of glassy LiPO<Subscript>3</Subscript>/crystalline Al<Subscript>2</Subscript>O<Subscript>3</Subscript> (ZrO<Subscript>2</Subscript>) composite electrolytes

Glassy LiPO₃/crystalline Al₂O₃ and glassy LiPO₃/crystalline ZrO₂ (0–12.5 vol.% of oxide fillers) composite solid electrolytes have been prepared by glass matrix softening. Their thermal and transport properties have been investigated by differential scanning calorimetry (DSC) and impedance spectroscopy methods. The addition of ZrO₂ leads to a decrease in the crystallization temperature of LiPO₃ glass. It was found that the conductivity behavior depends on the nature of the dispersed addition. In the case of the Al₂O₃ addition, the increase in the electrical conductivity is observed. The ionic conductivity of the LiPO₃/10% Al₂O₃ composite reaches 5.8 × 10^?8 S/cm at room temperature. In contrast, the conductivity in the LiPO₃/ZrO₂ composite system decreases.     

Investigation of luminescence spectra of the Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce single-crystal films

The luminescence spectra of single-crystal films and bulk crystals of yttrium-aluminum garnet Y₃Al₅O₁₂ and Ce³⁺-activated Y₃Al₅O₁₂ were investigated. It was shown that the room-temperature luminescence intensity of the Ce³⁺-free single-crystal Y₃Al₅O₁₂ film was considerably lower than that of the bulk crystals, while the luminescence intensity of the Ce³⁺ ions in the Y₃Al₅O₁₂:Ce films was considerably higher than that one for the corresponding bulk crystal.