Analysis of amitrole by normal-phase liquid chromatography and tandem mass spectrometry using a sheath liquid electrospray interface

The coupling of normal-phase liquid chromatography to tandem mass spectrometry, previously developed in our laboratory, has been applied to the analysis of amitrole. This coupling utilizes an electrospray interface modified to accommodate the introduction of a make-up solution at the tip of the electrospray probe. A methanolic solution containing 3 mM ammonium acetate delivered at a flow rate of 10 microL . min(-1) was found to be the optimal sheath liquid to promote successful ionization of the amitrole. Protonated molecules, arising from in-source dissociation of ammonium adducts, were subjected to tandem mass spectrometric experiments in a triple-quadrupole instrument. The main fragmentation reactions were characterized and selected to acquire chromatographic data in the multiple reaction monitoring mode. The limit of detection for amitrole was in the ppm range without any preconcentration step. Enhanced efficiency of ion transmission achievable nowadays in mass spectrometers (this analytical configuration was developed with a 15-year-old instrument) is reasonably expected to further improve this detection level.     

Microelectrospray interface with coaxial sheath flow for high-resolution capillary electrophoresis/mass spectrometry separation

We have fabricated a coaxial sheath liquid flow microelectrospray ionization (microESI) interface for capillary electrophoresis coupled with mass spectrometry (CE/MS). The ESI interface, which features a reduced probe diameter (130 microm i.d. x 174 microm o.d.) with a nebulizer-free format, can relatively easily electrospray a large amount of make-up sheath liquid (5-10 microL/min) over the long term (more than 80 runs) with a high degree of stability. The interface also provides higher separation qualities and improved detection sensitivities compared with a conventional ion spray (IS) interface.     

In-spray supercharging of intact proteins by capillary electrophoresis–electrospray ionization–mass spectrometry using sheath liquid interface

Capillary electrophoresis (CE) coupled with electrospray ionization (ESI) mass spectrometry (MS) is a suitable technique for the analysis of intact proteins. The main configuration to realize this coupling is the sheath liquid interface, which is characterized by the addition of a make-up liquid providing the electric contact as well as the appropriate flow and solvent composition for optimal ionization and evaporation. One main advantage of this interface is that the composition of the sheath liquid can be tuned to modify the ionization without affecting CE selectivity and efficiency. In the case of protein ionization, this feature is particularly interesting to modulate their charge-state distribution (CSD), while keeping the separation performance unchanged.     

Fast analysis of flavonoids in plant extracts by liquid chromatography-ultraviolet absorbance detection on poly(carboxylic acid)-coated silica and electrospray ionization tandem mass spectrometric detection

A highly hydrophilic poly(7-oxonorbornene-5,6-dicarboxylic acid-block-norbornene) [=poly-(ONDCA-b-NBE)]-coated silica was investigated for the liquid chromatographic (LC) determination of flavonoids in plant extracts of complex biological origin using UV absorbance and mass spectrometric (MS) detection. Compared to the most commonly used octadecyl derivatized silica this sorbent allowed fast separations even at extreme pH values. Furthermore, UV absorbance and MS detection were evaluated. As we found, UV detection at 254 nm allows the determination of flavonoids down to the ng range with a linearity of R2>0.9906. For the more selective characterization the validated LC system was coupled to a quadrupole ion trap mass spectrometer via an electrospray ionization (ESI) interface. MS detection showed high linearity (R2>0.9904) for all investigated flavonoids. Due to the relatively high flow-rate of 1 ml/min the limits of detection were found in the lower-microg range. Collision induced dissociation was applied to obtain characteristic fragmentation fingerprints. Finally, the validated LC-ESI-MS-MS method demonstrated that this poly-(ONDCA-b-NBE) stationary phase allows fast characterization and quantitation in onion, elderflower blossom, lime blossom, St. John's Wort and red wine.     

Sheath liquid effects in capillary high-performance liquid chromatography-electrospray mass spectrometry of oligonucleotides

Fused-silica capillary columns of 200 μm inner diameter were packed with micropellicular, octadecylated, 2.3 μm poly(styrene–divinylbenzene) particles and applied to the separation of oligonucleotides by ion-pair reversed-phase high-performance liquid chromatography. Oligonucleotides were eluted at 50°C with gradients of 3–13% acetonitrile in 50 mM triethylammonium bicarbonate. Addition of sheath liquid to the column effluent allowed the detection of oligonucleotides by electrospray ionization mass spectrometry using full-scan data acquisition with a detectability comparable to that obtained with UV detection. The signal-to-noise ratios with different sheath liquids increased in the order isopropanol相似文献   

A sheath-flow nanospray interface for capillary electrophoresis/mass spectrometry

We have developed a novel sheath-flow interface for low-flow electrospray ionization mass spectrometry (ESI-MS) and capillary electrophoresis/electrospray mass spectrometry (CE/ESI-MS). The interface is composed of two capillaries. One is a tapered fused-silica ESI emitter suitable for microliter and nanoliter flow rate electrospray and the other is a tail-end gold-coated CE separation column that is inserted into the emitter. A sheath liquid is supplied between the column and the emitter capillaries. The gold coating and the sheath liquid are used as the conducting media for ESI and the CE circuit. This novel design was initially evaluated by an infusion ESI-MS analysis of the most common antiretroviral dideoxynucleosides, followed by CE/MS coupling analysis of several antidepressant drugs. With infusion studies, the effects of the sheath liquid and the sample flow rates on detection sensitivity and signal stability were investigated. For an emitter with an internal diameter of 30 microm, the optimum flow rates for the sheath and the sample were 200 and 300 nL/min, respectively. The main improvement of this approach in comparison with conventional sheath liquid approaches using an ionspray interface is the gain in sensitivity. Sensitivities were three times better for dideoxynucleosides analyzed by infusion and 12 times higher for antidepressant drugs analyzed by CE/MS with this interface compared with ionspray. The emitter is durable, disposable, and simple to fabricate.     

Capillary electrophoresis-electrospray ion-trap mass spectrometry for the separation of chlorophenols

Eighteen positional isomers of chlorophenols were separated by capillary electrophoresis (CE) and detected on-line by electrospray ionization ion-trap mass spectrometry (MS). Conditions for the coupling of CE to MS, e.g., the concentration of carrier electrolyte, the sheath liquid composition and the sheath gas flow-rate were optimized. Diethylmalonic acid (5 mM) at pH 7.25 and isopropanol-250 mM dimethylamine (80:20) as sheath liquid were used. The activation parameters for ion-trap mass spectrometric analysis of chlorophenols were optimized. The mass spectra, obtained for all the analytes, revealed that the [M-H]- ion was the base peak for all chlorophenols. Moreover, conditions for CE-MS-MS detection were established and [M-H-HCl]- ions were detected.     

Combination of liquid chromatography/tandem mass spectrometry and gas chromatography/mass spectrometry for the detection of 21 anabolic steroid residues in bovine urine

For the detection of anabolic steroid residues in bovine urine, a highly sensitive liquid chromatographic/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method was developed using both positive and negative ionization. For four compounds the ESI mode was not sensitive enough and gas chromatographic/mass spectrometric GC/MS detection was therefore still necessary as a complementary method. The sample clean-up consisted of solid-phase extraction (SPE) on a C(18) column followed by enzymatic hydrolysis and a second solid-phase extraction on a combination of a C(18) and a NH(2) column. After this last SPE clean-up, the eluate was split into two equal aliquots. One aliquot was further purified and after derivatization used for GC/MS analysis. The other aliquot was analyzed with LC/MS/MS in both ESI+ and ESI- modes. The method was validated according to the European Commission Decision 2002/657/EC. Decision limits (CCalpha) were between 0.16 and 1 ng ml(-1) for the compounds detected with the LC/MS/MS method. The developed method is used in routine analysis in our laboratory.     

Capillary column supercritical fluid chromatography-atmospheric pressure ionisation mass spectrometry interface performance of atmospheric pressure chemical ionisation and electrospray ionisation.

A supercritical fluid chromatography interface probe for atmospheric pressure ionisation mass spectrometry (API-MS) with the advantage of convenient switch between ionisation modes [atmospheric pressure chemical ionisation (APCI) and electrospray ionisation (ESI)] has recently been reported [P.J.R. Sj?berg, K.E. Markides, J. Chromatogr. A, 785 (1997) 101]. In order to obtain a stable ion signal and a low minimum detectable quantity, the design of the spray devise has to be optimised. For easy optimisation in the APCI mode, the corona needle was mounted directly on the interface probe. To compensate for the adiabatic cooling of the expanding mobile phase in the APCI mode, a heated region around the restrictor tip was used. In comparison, ESI required no additional heat, which might also prevent fragmentation for thermolabile compounds. As the mobile phase used was neat CO2, a low flow of make-up liquid was utilised in the ESI mode for transfer of the analytes from the expanding CO2 gas to the liquid phase before ionisation. The low make-up liquid flow in the ESI mode was sufficient for preventing the restrictor from becoming blocked. Factors that influence the ion signal intensity and stability have been studied. In APCI mode, corona needle position, nebuliser gas flow and gas additives were studied and in ESI mode, spray capillary assembly dimension and position, liquid flow-rate and composition were studied. The achievable detection limits were in the 50-0.1 pg (i.e., 290 fmol-140 amol) range. The detection limit in APCI mode was improved by a factor of about 20-25 compared to an earlier design [L.N. Tyrefors, R.X. Moulder, K.E. Markides, Anal. Chem. 65 (1993) 2835].     

Improved liquid chromatography/mass spectrometric analysis of low molecular weight carboxylic acids by ion exclusion separation with electrospray ionization

An improved, simple and sensitive analytical method for low molecular weight organic acids has been developed. A mixture of acetic, propionic, butyric, glycolic, lactic, 2-hydroxybutyric, malonic, succinic, glutaric, tartaric and citric acids was separated on a semi-rigid styrene-divinylbenzene copolymer-based H-type cation-exchange resin (ULTRON PS-80H) based on an ion exclusion chromatographic (IEC) mechanism, with detection using electrospray ionization mass spectrometry (ESI-MS). Formic or acetic acid was used as a mobile phase to separate the carboxylic acids within 15 min. For liquid chromatography/mass spectrometry (LC/MS), the ESI interface was used in both positive and negative ionization mode. ESI produced reasonable signals from positive ions, [M+NH(4)](+), of acetic, propionic and butyric acids and from negative ions, [M-H](-), of glycolic, lactic, 2-hydroxybutyric, malonic, succinic, glutaric, tartaric and citric acids. The effects of ionization parameters, source temperature, capillary voltage and cone voltage, on sensitivity and linearity were examined. Linear plots of peak area versus concentration were obtained over the range 0.1-20 ppm for MS detection. The detection limits of the target carboxylic acids calculated at signal-to-noise (S/N) ratio of 3 ranged from 9 to 59 ppb. The reproducibility of retention times and peak areas were 0.55-1.25 and 0.85-2.45%, respectively.     

Reversed-phase high-performance liquid chromatographic/mass spectrometric method for separation of 4-methylimidazole and 2-acetyl-4-(1,2,3,4-tetrahydroxybutyl)imidazole at pg levels

A high-performance liquid chromatographic/mass spectrometric method (HPLC/MS) has been developed to determine both 4-methylimidazole (4MeI) and 2-acetyl-4-(1,2,3,4-tetrahydroxybutyl)imidazole (THI) in one run. Among three sorbents tested, the best peak shape of 4MeI was achieved on a reversed-phase MetaChem Polaris C18-A at pH 9.5. The sensitivity and the range of UV detection at 215 and 290 nm for 4MeI and THI, respectively, were compared to the parameters achieved by the electrospray ionization mass spectrometric (ESI/MS) detection in the presence of 5 mmol l⁻¹ ammonium hydroxide using selected ion-monitoring (SIM) mode. The on-column limits of detection were 0.147 ng of 4MeI and 0.084 ng of THI using UV detection and 1 pg of 4MeI and 3 pg of THI using ESI/MS detection, respectively. The effect of both ammonium ion concentration and energy of fragmentation on 4MeI and THI ionization is discussed. The method could be applied for a fast and sensitive determination of 4MeI and THI in different biological materials as well as in Class III Caramels.     

Performance of a sheathless porous tip sprayer for capillary electrophoresis-electrospray ionization-mass spectrometry of intact proteins

The performance of a prototype porous tip sprayer for sheathless capillary electrophoresis-mass spectrometry (CE-MS) of intact proteins was studied. Capillaries with a porous tip were inserted in a stainless steel needle filled with static conductive liquid and installed in a conventional electrospray ionization (ESI) source. Using a BGE of 100 mM acetic acid (pH 3.1) and a positively charged capillary coating, a highly reproducible and efficient separation of four model proteins (insulin, carbonic anhydrase II, ribonuclease A and lysozyme) was obtained. The protein mass spectra were of good quality allowing reliable mass determination of the proteins and some of their impurities. Sheath-liquid CE-MS using the same porous tip capillary and an isopropanol-water-acetic acid sheath liquid showed slightly lower to similar analyte responses. However, as noise levels increased with sheath-liquid CE-MS, detection limits were improved by a factor 6.5-20 with sheathless CE-MS. The analyte response in sheathless CE-MS could be enhanced using a nanoESI source and adding 5% isopropanol to the BGE, leading to improved detection limits by 50-fold to 140-fold as compared to sheath liquid interfacing using the same capillary - equivalent to sub-nM detection limits for three out of four proteins. Clearly, the sheathless porous tip sprayer provides high sensitivity CE-MS of intact proteins.     

On-line coupling of liquid chromatography at critical conditions with electrospray ionization tandem mass spectrometry for the characterization of a nitroxide-mediated poly(ethylene oxide)/polystyrene block copolymer

Coupling of liquid chromatography at critical conditions (LCCC) with on-line mass spectrometry (MS) detection was implemented via an electrospray ionization (ESI) interface, using a mobile phase containing the cationizing agent. Critical conditions established for poly(ethylene oxide) were used to characterize a poly(ethylene oxide)/polystyrene block copolymer (PEO-b-PS) in both MS and MS/MS modes. As co-oligomer molecules were successfully separated according to the PS block size, structural information could be reached from simplified MS spectra. The microstructure of this copolymer, synthesized by nitroxide-mediated polymerization, could further be unambiguously characterized in LCCC/ESI-MS/MS experiments since the PS block size could be reached by both the co-oligomer chromatographic behavior and its MS/MS pattern.     

Determination of pharmaceuticals in aqueous samples using positive and negative voltage switching microbore liquid chromatography/electrospray ionization tandem mass spectrometry

Analytical methods were developed for atorvastatin, novobiocin and roxithromycin using microbore liquid chromatography/electrospray ionization tandem mass spectrometry (microbore LC/ESI-MS/MS) in positive and negative voltage switching mode. Atorvastatin and roxithromycin require the positive-ion mode, whereas the negative-ion mode is required for the determination of novobiocin. Using the positive and negative voltage switching function, the three analytes were determined with one injection, and the time required was half that required using separately run positive- and negative-ion modes, without any reduction in sensitivity. A microbore LC column (100 x 1.0 mm i.d.) was chosen for chromatographic separation with mobile phase solvents acetonitrile and 10 mM aqueous ammonium acetate. The flow-rate was 0.1 ml min(-1) and the injection volume was 1 micro l. The analytes were quantified in the multiple reaction monitoring mode with external standards. By switching the positive and negative voltage, the three analytes were determined with a 4 min chromatographic run and with instrumental detection limits of 1-3 pg. This analytical method, using a microbore LC column combined with solid-phase extraction, was applied successfully to the determination of trace levels of the above pharmaceuticals in aqueous samples. Atorvastatin was detected in a sewage treatment plant final effluent.     

Analysis of amlodipine in human plasma by liquid chromatography-mass spectrometry

A simple, sensitive, and specific liquid chromatographic method coupled with electrospray ionization (ESI)-mass spectrometry for the determination of amlodipine is developed. After extraction by ethyl acetate using nicardipine as the internal standard, solutes are separated on a C18 column with a mobile phase of methanol-1% HAc (65:35). Detection is performed on an air pressure ionization single quadruple mass spectrometer equipped with an ESI interface and operated in positive-ionization mode. Amlodipine quantitation is realized by computing the peak-area ratio (amlodipine-nicardipine) of the extracts analyzed in single ion monitoring mode (m/z 431 and m/z 480 for amlodipine and nicardipine, respectively) and comparing them with the calibration curve (r = 0.9991).     

Microfabricated liquid junction hybrid capillary electrophoresis‐mass spectrometry interface for fully automated operation

One of the challenging instrumental aspects in coupling an automated CE instrument with ESI mass spectrometry (CE‐MS) is finding the balance between the stability, reproducibility and sensitivity of the analysis and compatibility with the standard CE instrumentation. Here, we present a development of a new liquid junction based electrospray interface for automated CE‐MS, with a focus on the technical design followed by computer modeling of transport conditions as well as characterization of basic performance of the interface. This hybrid arrangement designed as a microfabricated unit attachable to the automated CE instrument allows using of a wide range of separation capillaries with respect to their diameter, length or internal coating (e.g., for suppressed electroosmotic flow). Different compositions of the ESI liquid and background electrolyte solutions can be used if needed. The microfabricated part, prepared by laser machining from polyimide, includes a self‐aligning liquid junction, a short transport channel, and a pointed sprayer for the electrospray ionization. This microfabricated part is positioned in a plastic connection block securing the separation capillary and flushing ports. Transport conditions were modelled using computer simulation and the real life performance of the interface was compared to that of a commercial sheath liquid interface. The basic performance of the interface was demonstrated by separations of peptides, proteins, and oligosaccharides.     

液相色谱-串联质谱法同时测定8种花草茶中77种农药残留

以QuEChERS作为样品前处理手段,采用高效液相色谱-串联质谱（HPLC-MS/MS）检测技术,建立了适用于8种花草茶中77种农药残留同时检测的方法。8种花草茶样品均采用1%（v/v）乙酸乙腈溶液和1 g乙酸铵提取,经4 g无水硫酸镁、0.50 g C18、0.50 g N-丙基乙二胺（PSA）和0.05 g石墨化炭黑（GCB）分散萃取净化,然后采用Venusil MP C18色谱柱分离,以0.1%（v/v）甲酸水溶液和乙腈为流动相梯度洗脱,在电喷雾电离（ESI）源、正负离子交替扫描模式下进行检测,基质匹配标准溶液定量。结果表明,77种农药在0.5~100.0 μ g/L范围内线性关系良好,相关系数大于0.995;77种农药的加标回收率为70.3%~110.0%,相对标准偏差为2.6%~9.8%,检出限为1.0~10.0 μ g/kg。该法灵敏度、准确度和精密度均符合相关农药残留测定的技术要求。     

Profiling histidine-containing dipeptides in rat tissues by liquid chromatography/electrospray ionization tandem mass spectrometry

The histidine-containing dipeptides carnosine (CAR) and structurally related anserine (ANS) and homocarnosine (HCAR), widely distributed in vertebrate organisms, have recently been proposed as endogenous quenchers for highly cytotoxic alpha,beta-unsaturated aldehydes generated by peroxidation. A sensitive, selective, specific and rapid liquid chromatographic/electrospray ionization tandem mass spectrometric assay was developed and validated for the simultaneous determination of these peptides in biological matrices in order to establish their plasma/tissue distribution. Samples (plasma or tissue homogenates from male rats) were prepared by protein precipitation with HClO(4) (1 : 1, v/v) containing H-Tyr-His-OH as internal standard. The supernatant was separated on a Phenomenex Sinergy polar-RP column with a mobile phase of water-acetonitrile-heptafluorobutyric acid (9 : 1 : 0.01, v/v/v) at a flow-rate of 0.2 ml min(-1), with a run time of 10 min. Detection was effected on an ion trap mass spectrometer equipped with an electrospray ionization interface operating in positive ionization mode. The acquisitions were in the multiple reaction monitoring mode using the following precursor --> product ion combinations: H-Tyr-His-OH (internal standard) m/z 319 --> 301; CAR m/z 227 --> 210 + 209; ANS m/z 241 --> 224 + 197 + 170; HCAR m/z 241 --> 156. The method was validated over the concentration range 15-1000 nmol g(-1) and the limit of quantification (LOQ) and limit of detection (LOD) were 12.5 and 4.2 pmol injected, respectively. The intra- and inter-day precisions were <10% (< or =17.47% at the LOQ) and the intra- and inter-assay accuracies were within +/-10% for all concentrations. The mapping profile in rat tissue gave the following results: the highest concentrations of CAR and ANS were found in skeletal muscles (soleus, gastrocnemius, tibialis), followed by the heart, cerebellum and brain (ANS below the LOQ). HCAR was found only in the brain and cerebellum. No histidine-containing dipeptides were detectable in plasma, liver, kidney and lung.     

Electrosonic spray ionization--an ideal interface for high-flow liquid chromatography applications

Electrosonic spray ionization (ESSI) has been studied as an interface between high-performance liquid chromatography (HPLC) and mass spectrometry (MS), using sample flow rates up to 3.0 ml min⁻¹. This ionization interface was compared with pneumatically assisted electrospray ionization (ESI) using mass spectrometry for detection. For experiments that did not involve direct comparison of different flow rates, the ESI experiments were performed using post column splitting to work at optimal conditions. ESSI allows the interfacing of conventional or high-resolution liquid chromatography (LC) methods to mass spectrometry without post column splitting. High sample flow rates could be handled without a significant loss of signal intensity using a nebulization gas flow rate of 5.5 L min⁻¹. Since ESI needs to be operated with lower sample flow rates, it is limited to micro/nano LC systems, or post column splitting must be used. In particular, nano LC systems have to be treated with great care and require constant maintenance. When using post-column splitting, the increased diffusion can become a problem especially when using systems with very small void volumes. In all experiments ESSI showed better signal intensities than a commercially available, pneumatically assisted ESI source. ESSI does not require heating of the nebulizer gas, which should help to preserve the original structure of thermally unstable molecules. Therefore, ESSI is presented as an alternative to the commercially available heated ESI sources of AB SCIEX, Thermo Fischer, Agilent and Waters. The observed LC-ESSI-MS ion chromatograms are shown to be very stable even when using flow rates higher than 1.0 ml min⁻¹, which could be very suitable for ultra high performance LC, where sample flow rates up to 2.0 mL min⁻¹ with backpressures up to 1200 bar are used. Also, a difference in the relative intensities of singly and doubly protonated peptide monomers and dimers was observed between the two ionization methods. The coefficients of determination for the calibration of instrument response for Val–Tyr–Val and Met-Enkephalin showed excellent linearity over a wide concentration range (0.1–100 μM), while ESI results were only linear over a much smaller range (0.1–20 μM). The observed behavior is thought to be caused by insufficient ionization efficiency of solutions above ∼20 μM by ESI, exemplifying the robustness of ESSI as an interface between LC and MS.     

Sonic spray ionization interface for liquid chromatography-mass spectrometry

A sonic spray ionization (SSI) interface for liquid chromatography-mass spectrometry (LC-MS) analysis was optimized for analysis of 2-[(1R)-3-[bis(1-methylethyl)amino]-1-phenylpropyl]-4-methyl-phenol (tolterodine), used as a model drug substance, and the influence of different parameter settings was evaluated using factorial design. A comparison between SSI and electrospray ionization (ESI) was made for tolterodine, tolterodine metabolites, and a set of steroids.SSI was found to give slightly poorer repeatability and broader peaks for tolterodine compared to ESI. However, there was no significant difference in chromatographic peak shape, and the repeatability using SSI was similar to that obtained using ESI if a ratio (area of tolterodine/area of metabolite) was used. In this study, the sensitivity was higher using SSI. For the analysis of pregnanolone, less water loss was obtained using SSI, probably due to less energy being transferred to the analyte upon ionization.