介孔材料固定化酶

本文综述了近年来酶在介孔材料上的固定化研究新进展,重点介绍了水解酶类的脂肪酶、蛋白酶、青霉素G酰化酶等和氧化还原酶类的辣根过氧化物酶、氯过氧化物酶、漆酶等在介孔材料上的固定化研究现状,并对介孔材料固定化酶的发展前景进行了展望。     

酶的固定化及其应用

酶的固定化研究始于1960年代中期,从1970年代初开始酶的固定化技术研究发展很快,至1980年代初,每年约发表1000篇以上的文献和近200篇专利,所报道的固定化方法达100种以上[1].1980年代中以后,酶和细胞固定化研究的发展速度开始减慢,从而有人认为,对酶的固定化技术应予以重新评价     

单壁碳纳米管对C-C键水解酶BphD的固定化性能

采用修饰与未修饰单壁碳纳米管固定C-C键水解酶BphD,并对固定化酶的相对活性、稳定性、重复使用性进行了考察.结果表明,未修饰单壁碳纳米管固定的BphD相对活性为游离态的52.5%,其热稳定性和在变性剂中的稳定性均有所提高,且重复使用10次仍可保持初始活力的90%.修饰单壁碳纳米管固定的BphD相对活性可达99.7%,但其稳定性没有明显提高.同源模建及分子对接分析结果显示,未修饰的单壁碳纳米管对BphD亚基之间的联系可能存在干扰作用,从而对其活性产生影响.     

酶和细胞的固定化

本文对酶和细胞固定化技术的近期发展作了较为全面的扼要综述。     

微胶囊固定化过氧化氢酶

以乙基纤维素为膜材，用液中干燥法将过氧化氢酶微胶囊化，研究了温度和ｐＨ值对酶活性的影响及过氧化氢和尿素对固定化酶的抑制作用，由于乙基纤维素膜的保护，明胶对ｐＨ值的缓冲作用及明胶与尿素的反应，明显地扩大了酶对温度和ｐＨ值的适应性，降低了酶活性抑制剂的影响。     

酶生物传感器中酶的固定化技术

综述了近年来国内外酶生物传感器的进展,介绍了制作酶生物传感器的关键技术——酶的固定化。固定化方法主要有吸附法、包埋法、共价键合法和交联法。固定化材料分为无机材料、有机聚合物材料、凝胶以及生物材料等。探讨了固定化方法和固定化材料对酶的固定化及酶生物传感器性能的影响,并结合自己的工作展望了酶生物传感器的发展方向和趋势。     

漆树酶的固定化研究

本文对我国特产资源生漆液中漆树酶的固定化进行了研究。考查了各种无机盐溶液处理不同无机载体,活化反应及漆树酶固定化条件对固定化漆树酶性能的影响。研究表明,经ZrCl_4处理后的多孔硅胶作载体的固定化漆树酶活力回收高、稳定性好、重复使用20次其保留活力仍有75%。同时对固定化漆树酶和自由态漆树酶的反应pH、温度、K_m值作了比较。对漆树酶通过过渡金属氢氧化物固定在无机载体土的机理也作了初步探讨。     

固定化酶技术及其进展

本文综述了固定化酶技术的研究现状。     

漆树酶固定化及其性质研究

本文介绍了用过渡金属水合氧化物固定化漆树漆酶的方法。考察了整合法固定漆树酶的最适条件。对固定化前后漆酶的性质进行了比较,并分析了造成固定化酶与游离酶性质差异的原因。     

Nanofibrous Membranes Containing Carbon Nanotubes: Electrospun for Redox Enzyme Immobilization

Summary: Nanofibrous membranes that possess reactive groups are fabricated by the electrospinning process from PANCAA solutions that contain MWCNTs. Field emission scanning electron microscopy is used to evaluate the morphology and diameter of the nanofibers. Potentials for applying these nanofibrous membranes to immobilize redox enzymes by covalent bonding are explored. It is envisaged that the electrospun nanofibrous membranes could provide a large specific area and the MWCNTs could donate/accept electrons for the immobilized redox enzymes. Results indicate that, after blending with MWCNTs, the diameter of the PANCAA nanofiber increases slightly. The PANCAA/MWCNT nanofibrous membranes immobilize more enzymes than that without MWCNTs. Moreover, as the concentration of the MWCNTs increases, the activity of the immobilized catalase is enhanced by about 42%, which is mainly attributed to the promoted electron transfer through charge‐transfer complexes and the π system of MWCNTs.

The covalent immobilization of redox enzymes, such as catalase, on a PANCAA/MWCNTs nanofiber.     

纳米碳管负载Co催化生长纳米碳管

In this paper, carbon nanotubes (CNTs) used as support and cobalt as catalyst to prepare new CNTs was studied. CNTs could grow well if the precursor CNTs were supported with Co on its surface. On the contrary, CNTs couldn’t grow at all if the precursor CNTs were not supported with Co. The TEM images showed that diameters of the obtained CNTs were different from those of the precursor CNTs. The pure CNTs could be prepared in this method without further purifying. The amount of Co on the precursor CNTs could affect the growth of CNTs greatly. When the content of metal on precursor CNTs was less than 16.2%, the amount of the obtained CNTs increased with the increasing amount of Co, and the maximum growth amount of 625% of CNTs could be obtained. But if the content of metal was more than 16.2%, the amount of Co had no influence on the growth of CNTs.     

Electrochemical Pretreatment of Amino‐Carbon Nanotubes on Graphene Support as a Novel Platform for Bilirubin Oxidase with Improved Bioelectrocatalytic Activity towards Oxygen Reduction

The electrochemical conditioning of amino‐carbon nanotubes (CNTs) on a graphene support in an alkaline solution is used to produce ?NHOH as hydrophilic functional groups for the efficient immobilization of bilirubin oxidase enzyme. The application of the immobilized enzyme for the direct electrocatalytic reduction of O₂ is investigated. The onset potential of 0.81 V versus NHE and peak current density of 2.3 mA cm^?2 for rotating modified electrode at 1250 rpm, indicate improved biocatalytic activity of the proposed system for O₂ reduction.     

碳纳米管对羟基磷灰石基复合材料力学性能的影响

将力学性能优良的碳纳米管(CNTs)与羟基磷灰石(HA)生物陶瓷相复合,发展CNTs/HA复合材料来应用于骨组织修复领域,有望解决HA生物陶瓷力学性能的不足.通过3种不同的制备方法,即通过表面活性剂将CNTs分散在HA基体中、通过酸碱中和反应将CNTs与HA共沉淀以及通过体外浸泡在CNTs上矿化生长HA等方法来获得CNTs/HA复合材料.深入研究CNTs的表面结构和分散状态对CNTs/HA复合材料力学性能的影响.结果表明,CNTs的添加改变了HA的脆性,导致复合材料抗压力学性能得到提高.但是,由于复合材料制备方法的不同,导致CNTs在HA基体中的分散状态、表面结构的完整性以及与HA的界面结合情况不同,导致其抗压力学性能不同.其中,通过表面活性剂将CNTs分散在HA基体中而获得复合材料的抗压力学性能表现最好,而CNTs与HA通过共沉淀法所获得复合材料的抗压力学性能表现最差.     

碳纳米管负载纳米Fe2O3的研究

本文研究了用液相化学沉积法制备的碳纳米管负载Fe₂O₃。首先用浓HCl、浓HNO₃和浓HNO₃ / H₂SO₄(混酸)三种酸对碳纳米管进行改性处理，对样品进行了TEM形貌观察和FTIR光谱分析，FTIR分析表明浓HCl处理后不能在碳纳米管表面引入官能团，而浓HNO₃能在碳纳米管表面引入-OH和-C=O，浓HNOO₃ / H₂SO₄能在碳纳米管表面引入大量的-OH、-C=O、COOH。制备了以上三种碳纳米管分别负载Fe₂O₃。TEM分析表明，负载效果：混酸>浓HNO₃>浓HCl。经混酸处理后的碳纳米管所负载的Fe₂O₃的XRD分析，表明所负载的是α-Fe₂O₃。机理分析表明碳纳米管上的含氧基团能增强其在水溶液中的分散性，同时能增强其对Fe³⁺吸附和离子交换能力，使吸附在碳纳米管表面的Fe³⁺成为结晶成核中心，调节溶液pH值后，使Fe₂O₃沉积在碳纳米管表面。     

Gas Sensors Based on Single-Wall Carbon Nanotubes

Single-wall carbon nanotubes (SWCNTs) have a high aspect ratio, large surface area, good stability and unique metallic or semiconducting electrical conductivity, they are therefore considered a promising candidate for the fabrication of flexible gas sensors that are expected to be used in the Internet of Things and various portable and wearable electronics. In this review, we first introduce the sensing mechanism of SWCNTs and the typical structure and key parameters of SWCNT-based gas sensors. We then summarize research progress on the design, fabrication, and performance of SWCNT-based gas sensors. Finally, the principles and possible approaches to further improving the performance of SWCNT-based gas sensors are discussed.     

碳纳米管负载铂修饰电极结合溶胶-凝胶技术制备胆固醇传感器

制作了碳纳米管和碳纳米管负载铂镶嵌修饰的浸蜡石墨电极,实验发现纳米铂的引入使修饰电极对过氧化氢的还原有更好的电催化性能。用溶胶凝胶法将胆固醇氧化酶固定在碳纳米管负载铂修饰的浸蜡石墨电极表面,构建了一种新型的胆固醇生物传感器。实现了低电位下对胆固醇的间接测定。胆固醇浓度在4.0×10-6~1×10-4mol/L范围内与其峰电流的增量呈现良好的线性关系。检出限为1.4×10-6mol/L。该传感器的灵敏度高,选择性好,可以避免样品中大量易氧化物质的干扰,且寿命长,性能稳定。     

Sol-Gel Immobilized Glucose-Oxidase: Calorimetric Investigations of Enzyme Activities

Using the sol-gel process, the enzyme glucose-oxidase was immobilized in modified SiO2 layers. The tetraethoxysilane based sol was varied by veratrylaldehyde, aminopropyltriethoxysilane and an azomethine compound, which was synthesized from both molecules. Changes in reaction kinetics of the sol-gel process by addition of veratrylaldehyde were observed by 29Si NMR measurements. The fixation of this additive in the final gel was clarified by FTIR spectroscopy.The influence of inserted functional groups on the enzyme activity was determined by calorimetry. The Enzyme Thermistor is a fast and uncomplicated method to obtain comparative results of sol-gel immobilized enzyme activity. Differences in immobilization effects were found dependent on structure and concentration of additives.     

Direct Electrochemistry and Electrocatalytic Properties of Hemoglobin Immobilized on Carbon Nanotubes Ionic Liquid Electrode

Hemoglobin (Hb) was directly immobilized on a multiwalled carbon nanotubes ionic liquid electrode by immersing this electrode in a solution consisting of Hb and 1‐octyl‐pyridinium chloride as an ionic liquid. The immobilized Hb displayed a pair of well‐defined cyclic voltammetric peaks with a formal potential of ?0.187 V in acetate buffer solution, pH 5.0. This modified electrode exhibits fast response, a long linearity range, a low detection limit, high stability and excellent sensitivity through hydrogen peroxide detection with a detection limit (3σ) of 3.18 µM. The electrode was also used for electrocatalysis and voltammetric determination of oxygen and trichloroacetic acid.