基于氮杂Mn咔咯二维纳米材料的单原子Mn中心催化氧化烷烃制醇

咔咯是由四个吡咯共轭相连而形成的具有芳香性的新型卟啉类大环化合物,但咔咯分子中存在一个直接连结两个吡咯环的C?C键,与卟啉相比,仅仅是少了一个“meso”位置的C原子.因此,在结构上,咔咯含有三个“吡咯型”氮原子和一个“吡啶型”氮原子,当咔咯失去三个内氢原子后变成了三价阴离子,易与金属形成高价态的稳定配合物.氮杂咔咯是一种咔咯的meso位上的C被取代为N的咔咯衍生物.与正常的咔咯相比,它更易于与过渡金属形成稳定配合物.正是由于这些独特的结构特点,使其在金属催化、染料敏化太阳能电池、光敏剂、金属传感器、甚至在医学上都有很好的应用前景.金属有机大环均相催化剂的非均相化,是改进反应产物分离和实现催化剂循环使用的最简单有效方法之一.环境友好的Mn氮杂咔咯催化剂,在温和条件下可以利用氧气直接将有机底物氧化.本文选用Mn氮杂咔咯催化剂作为基本构建单元,通过理论计算,构建了一种新型的具有高催化活性的含Mn氮杂咔咯环结构单元的二维纳米催化材料.我们分别使用高斯软件(Gaussian 09)和维也纳从头算模拟软件包(VASP)对孤立分子和周期性体系进行结构优化以及性质的计算.在这种二维材料中,每一个Mn原子作为相对独立的金属单原子中心(SAC),保留了单环中Mn金属中心的高催化活性.在温和的光照条件下,Mn金属中心可以直接活化氧气生成类自由基[Mn]-O-O中心,随后[Mn]-O-O中心可以有效地通过夺取有机底物中的H和紧接着新生自由基的偶合反应,选择性氧化C?H键为C?OH键.另外,通过沿[Mn]-O-O反应轴施加不同强度的外电场,可对此二维纳米材料的催化反应活性进行精细调控.本文为实验上制备基于Mn氮杂咔咯的非均相催化剂以及单原子Mn基催化剂提供了理论依据.     

基于氮杂Mn咔咯二维纳米材料的单原子Mn中心催化氧化烷烃制醇（英文）

咔咯是由四个吡咯共轭相连而形成的具有芳香性的新型卟啉类大环化合物,但咔咯分子中存在一个直接连结两个吡咯环的C-C键,与卟啉相比,仅仅是少了一个"meso"位置的C原子.因此,在结构上,咔咯含有三个"吡咯型"氮原子和一个"吡啶型"氮原子,当咔咯失去三个内氢原子后变成了三价阴离子,易与金属形成高价态的稳定配合物.氮杂咔咯是一种咔咯的meso位上的C被取代为N的咔咯衍生物.与正常的咔咯相比,它更易于与过渡金属形成稳定配合物.正是由于这些独特的结构特点,使其在金属催化、染料敏化太阳能电池、光敏剂、金属传感器、甚至在医学上都有很好的应用前景.金属有机大环均相催化剂的非均相化,是改进反应产物分离和实现催化剂循环使用的最简单有效方法之一.环境友好的Mn氮杂咔咯催化剂,在温和条件下可以利用氧气直接将有机底物氧化.本文选用Mn氮杂咔咯催化剂作为基本构建单元,通过理论计算,构建了一种新型的具有高催化活性的含Mn氮杂咔咯环结构单元的二维纳米催化材料.我们分别使用高斯软件(Gaussian 09)和维也纳从头算模拟软件包(VASP)对孤立分子和周期性体系进行结构优化以及性质的计算.在这种二维材料中,每一个Mn...     

咔咯锰(Ⅲ)配合物催化RNA磷酸二酯类似物HpPNP的水解断裂反应机理

采用密度泛函B3LYP方法研究了咔咯锰(Ⅲ)配合物催化水解断裂RNA磷酸二酯类似物2-羟丙基-4-硝基苯基磷酸酯(HpPNP)的反应机理以及中位取代基的性质和数目对反应能垒的影响。计算结果表明:断裂反应以特殊碱催化(SBC)机理进行,咔咯锰(Ⅲ)配合物与HpPNP形成双氢键和双配位独特的过渡态结构,经由P-O键断裂后形成产物。与无催化剂时相比,带吸电子取代基的咔咯锰(Ⅲ)配合物的催化能使反应能垒下降4%~34%。咔咯锰(Ⅲ)配合物中位的吸电子取代基效应能显著降低反应能垒,促进水解断裂反应的进行。     

不同取代基铁咔咯配合物对苯乙烯的催化氧化

合成了4种具有不同推-拉电子强度取代基的铁咔咯配合物,并通过紫外,核磁,质谱等手段对化合物进行了表征。考察了在乙腈溶液中,以叔丁基过氧化氢(TBHP),亚碘酰苯(PhIO),双氧水(H₂O₂)为氧源时,4种不同取代基铁咔咯配合物对于苯乙烯的催化氧化效果,并考察了咪唑作为轴向配体时对反应的影响。结果表明,产物的产率与氧源,催化剂和轴向配体均有关。以TBHP为氧源时,苯甲醛为主要产物;以PhIO作为氧源时,主要产物则为环氧苯乙烷;而当氧源为H₂O₂时,4种铁咔咯均不能有效地催化苯乙烯氧化。使用不同的氧源时,4种铁咔咯展现不一样的催化活性顺序,其催化过程可能涉及自由基和高价态的Fe(Ⅴ)-oxo咔咯。铁咔咯能与咪唑形成1:2的配合物,在催化体系中加入咪唑后,在不同的氧源条件下,咪唑对于反应产物的分布影响不同。     

不同取代基铁咔咯配合物对苯乙烯的催化氧化

合成了4种具有不同推-拉电子强度取代基的铁咔咯配合物,并通过紫外,核磁,质谱等手段对化合物进行了表征。考察了在乙腈溶液中,以叔丁基过氧化氢(TBHP),亚碘酰苯(PhIO),双氧水(H₂O₂)为氧源时,4种不同取代基铁咔咯配合物对于苯乙烯的催化氧化效果,并考察了咪唑作为轴向配体时对反应的影响。结果表明,产物的产率与氧源,催化剂和轴向配体均有关。以TBHP为氧源时,苯甲醛为主要产物;以PhIO作为氧源时,主要产物则为环氧苯乙烷;而当氧源为H₂O₂时,4种铁咔咯均不能有效地催化苯乙烯氧化。使用不同的氧源时,4种铁咔咯展现不一样的催化活性顺序,其催化过程可能涉及自由基和高价态的Fe(Ⅴ)-oxo咔咯。铁咔咯能与咪唑形成1:2的配合物,在催化体系中加入咪唑后,在不同的氧源条件下,咪唑对于反应产物的分布影响不同。     

咔咯及其金属配合物与DNA的作用和抗肿瘤活性

咔咯及其金属配合物与DNA相互作用和它们的抗肿瘤活性研究已成为咔咯大环化学前沿课题之一。本文综述了咔咯及其金属配合物与DNA相互作用和关于这类化合物在抗肿瘤方面的研究进展,系统介绍了咔咯及其金属配合物与DNA结合模式、在氧化剂存在或光照条件下的核酸酶活性、与G-四链体DNA相互作用以及这类化合物抗肿瘤活性。     

铜咔咯催化烯丙基sp~3-C—H键与羧酸的酯化反应(英文)

研究了5,10,15-三(五氟苯基)咔咯铜配合物(CuTPFC)催化的烯丙基sp~3杂化C—H键与羧酸的氧化交叉脱氢偶联反应(CDC).该反应可以平稳地生成烯丙基酯,且具有广泛的底物范围和良好的官能团耐受性.克级实验中,在催化剂的用量仅为0.01 mol%的情况下,转换量(TON)可以达到5100,表明目前的催化体系在烯丙基酯合成方面具有潜在的应用前景.     

取代基对咔咯锰(V)-氧配合物Mn―O的成键影响

用密度泛函理论(DFT)方法对一系列A₃型咔咯锰(V)氧配合物进行了理论计算. 结果表明: 咔咯锰(V)-氧配合物中Mn―O键是由1 个σ键和2 个π键构成的叁键结构; 当咔咯中位取代基由推电子过渡到拉电子性质时, 咔咯骨架紧缩, Mn―O键缩短, 其拉曼光谱的伸缩振动峰往高波数移动; 取代基与氧原子的静电作用模式由正-负吸引转化为负-负排斥, 导致Mn―O键解离能ΔE减少, 即拉电子基团有利于增强咔咯锰(V)-氧配合物氧原子的活泼性.     

铁配合物催化的有机反应研究进展

金属及其配合物催化的有机反应由于其快速、高效等优点成为近年来有机化学研究的热点,铁配合物由于其催化活性高、选择性好等优点受到化学家们的广泛关注.综述了近年来发展的铁配合物催化的有机反应,如聚合反应、硅/硼氢化反应、环加成反应、氧化与还原反应、交叉偶联反应以及1,4-加成反应等,并对其发展前景进行了展望.     

活性钌、锇-配体多重键配合物研究进展

金属一配体多重键配合物的反应性研究有助人们深入理解许多重要的金属催化过程,如生物体系中的氧化和固氮及有机合成中的金属催化原子或基团转移反应．含Os=N多重键的锇（VI）氮合物在还原剂存在下发生氮偶合反应生成双核氮分子桥连配合物,为与固氮机理有关的金属氮合物氮偶合反应提供实验证据．一系列具有可调结构和氧化性含M=O,M=NR,M=CR^1R^2（M=Ru,Os）多重键的活性钌／锇氧合物,钌亚胺基配合物,钌／锇卡宾配合物（包括手性配合物）已被成功分离,其结构已通过光谱手段和x射线单晶衍射确定．这些活性金属一配体多重键配合物分别能与有机化合物发生氧原子、亚胺基、卡宾转移反应,包括烯烃环氧化、环氮化、环丙烷化、cis双羟基化,c—H键羟基化、酰胺化、卡宾插入等,从而允许直接研究相应催化过程中金属．配体多重键中间体的原子或基团转移反应,为金属催化原子或基团转移反应（包括不对称催化反应）提供重要机理信息．已发展出一系列涉及钌．配体多重键活性物种的高选择性钌催化反应,包括2,6-Cl2pyNO与烯烃的环氧化和Wacker型氧化成醛,H2O2水溶液氧化烯、炔烃和醇为羧酸或cis-二醇,PhI=NR与饱和c—H键的酰胺化,重氮化合物的卡宾偶合,分子内卡宾插入c—H键,重氮化合物、亚胺、烯／炔烃的三组分偶合,及以“PhI（OAc）2＋RNH2”为氮源的金属催化C—N键形成反应等．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.