(二乙基二茂铁基)二茂铁基甲醇及其胺衍生物的合成与 性质

1,1'-二乙基-2-(和3)-二茂铁酰基二茂铁经LiAlH4还原得到两种相应的双二茂铁基甲醇。它们对酸的敏感性很高，与BF3在二氯甲烷中作用可形成稳定的二茂铁基甲基碳正离子，无需从溶液中分离出来，便可与胺RNH2[R=C2H5,n-C3H7,n-C4H9,HOCH2CH2,HOCH(CH3)CH2,HOCH2CH(C2H5)]作用得到产率颇高的二茂铁基胺，这种由α-二茂铁基醇制备α-二茂铁基胺的方法具有简单、快速和原料廉价的特点。     

双（甲基二茂铁基）代烷羟的合成

二茂铁衍生物在复合固体火箭推进剂中用作燃速催化剂,但其挥发性和迁移性较大,直接影响储存或使用时导弹的弹导性能。本文报导三种新型燃速催化剂:双(甲基二茂铁基)甲烷,2,2-双(甲基二茂铁基)丙烷和2,2-双(甲基二茂铁基)丁烷的合成和表征。小型试验表明其催化活性、挥发性及迁移性能均优于国内目前使用的叔丁基二茂铁。     

双(烷基二茂铁基)丙烷的合成及其燃速催化性质

双(烷基二茂铁基)丙烷的合成及其燃速催化性质;二茂铁衍生物;燃速催化剂     

二丁基双二茂铁甲醇及其胺衍生物的合成

2-二茂铁甲酰基-1，1'-二丁基二茂铁和3-二茂铁甲酰基-1,1'-二丁基二茂铁经LiAlN4还原为相应的相应的双二茂铁甲醇。这些羟基化合物对酸的敏感性很高，与BF3在CH2Cl2中作用可行到稳定的（二丁基二茂铁基）二茂铁基甲基碳正离子。该离子无需从溶液中分离出来，便可与胺作用形成N-取代衍生物。这种制备双二茂铁甲胺的方法具有操作简便和产率较好的特点。     

含二茂铁基聚合物的合成及应用研究进展

二茂铁基聚合物由于具有独特的结构特点,使其在电化学、催化、材料等方面受到了广泛的关注.二茂铁聚合物的种类较多且合成方法多种多样.本文综述了近年来含二茂铁基聚合物的合成及应用.从缩聚、开环聚合和接枝共聚等方面介绍了近年来二茂铁基聚合物的合成方法,讨论了二茂铁基聚合物在电化学、生物材料及其他方面的应用.最后,对二茂铁基聚合...     

不对称合成中的手性二茂铁基膦衍生物

在各种不对称有机合成中,使用手性催化剂可使反应具有较高的选择性,对映体收率也较高。近年来,可以方便地通过光学活性膦配体制备手性金属络合物催化剂。Knowles和Horner等首次报道将过渡金属均相催化剂用于不对称合成。他们将甲基苯基丙基膦作为手性配体与铑络合制备成催化剂。应用这种催化剂进行烯烃不对称氢化反应,可得到4～8%的光学活性产物。所引入的手性膦配体官能团对产物立体选择性的影响,取决于底物官能团与过渡金属催化剂手性配体之间的互相作用。     

星形和树枝状二茂铁基聚合物

介绍近年来星形和树枝状聚藏金属主要是含二藏铁基的星形和树枝状材料的研究进展。     

全共轭型二茂铁基聚合物

由于二茂铁独特的夹心结构使含二茂铁基聚合物具有独特的电、磁、催化以及氧化还原性能。全共轭型二茂铁基聚合物由于其特殊的π-π电子结构,使其在电学、光学等方面的表现出优越的性质。本文从3个方面（主链型、侧链型和超支化型）介绍了近年来含有二茂铁基团全共轭聚合物的合成及其性能方面的研究进展,讨论了聚合物的结构对溶解性、氧化还原性等方面的影响,并探讨了这一领域存在的问题及可能的发展方向。     

双二茂铁基烷酰化衍生物的还原反应

二茂铁甲烷,2,2-双二茂铁丙烷,2,2-双二茂铁基丁烷,2,2-双二茂铁基戊烷与乙酸酐、丙酸酐、正丁酸酐通过傅氏酰基化反应生成一系列双二茂铁基烷的酰化衍生物,再经LiAlH_4还原得到318个相应的α-羟基双二茂铁烷衍生物。文中并对它们的红外光谱和~1H NMR谱性质进行了研究。     

双二茂铁基吡咯衍生物电荷交互通道

以二茂铁炔烃为原料通过“一锅法”环加成反应合成了一系列2,5-双二茂铁基-1-苯基-吡咯衍生物, 包括: 2,5-双二茂铁基-1-(3-三氟甲基苯基)-吡咯(1), 2,5-双二茂铁基-1-(4-氟苯基)-吡咯(2), 2,5-双二茂铁基-1-苯基-吡咯(3), 2,5-双二茂铁基-1-(4-乙基苯基)-吡咯(4)和2,5-双二茂铁基-1-(4-乙氧基苯基)-吡咯(5), 使用元素分析, 傅里叶变换红外(FTIR)光谱, 质谱(MS)和核磁共振(NMR)等手段对化合物进行了结构表征. 采用循环伏安法(CV), 密度泛函理论(DFT)模拟计算研究了苯基上取代基对双二茂铁间电荷交互的影响. 研究发现第一氧化电位(E_a1), 峰电位差(ΔE)与取代基的哈米特常数(σ), 吡咯¹H NMR的化学位移(δ), 吡咯N原子自然轨道(NBO)电荷之间存在显著线性关联; 同时发现, N原子电荷密度升高, 双二茂铁间电荷交互能力减弱, N原子电荷密度降低, 双二茂铁间电荷交互能力提高. 因此这类双二茂铁基吡咯衍生物中N原子电荷密度对双二茂铁间电荷交互起着关键的影响作用.     

Progress on the synthesis and catalytic and anti‐migration properties of ferrocene‐based burning rate catalysts

Burning rate catalysts are of great importance in solid composite propellants for their unique property of accelerating combustion speed. Among various kinds of burning rate catalysts, ferrocene and its derivatives exhibit excellent catalytic effects and have become the most widely used burning rate catalysts. However, these simple ferrocenyl compounds trend to migrate in solid composite propellants during storage, which causes great damage to the propellants, equipment and environment and can even affect personal safety. The exploration of novel anti‐migratory ferrocene‐based compounds has become an advanced research hotspot in the field of burning rate catalysis. This review focuses on recent progress on the synthesis and catalytic properties of ferrocene‐based polymers and ferrocene derivatives as burning rate catalysts. Two main aspects of anti‐migratory exploration, i.e. synthesis of ferrocene‐based polymers and modification of the side groups of ferrocene, are summarized. Ferrocene‐based polymers can be obtained via condensation polymerization, addition polymerization, ring‐opening polymerization, polymer reactions, etc. Ferrocenyl compounds with active groups and ferrocene‐based metal coordination compounds were developed instead of the methods of lengthening the carbon chain of side groups and improving molecular polarity. Also, possible mechanisms of burning rate catalytic activity and migration are discussed and analyzed. Finally, the key points of the development of ferrocene‐based burning rate catalysts and solid composite propellants are proposed. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

Tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers as burning rate catalysts for ammonium perchlorate‐based propellant decomposition

Ferrocene‐based derivatives show potential application as burning rate catalysts (BRCs) for solid composite propellants. However, migration problems of simple ferrocene‐based derivatives limit their application as BRCs in solid composite propellants. To overcome the migration problems of ferrocene‐based BRCs and to enhance the burning rate of ammonium perchlorate (AP)‐based propellants, zero‐ to second‐generation tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers (G0, G1 and G2) were synthesized. The structures of G0, G1 and G2 were confirmed using ¹H NMR, Fourier transform infrared and UV–visible spectroscopies. The electrochemical behavior of G0, G1 and G2 was investigated using cyclic voltammetry. It was found that G0, G1 and G2 showed redox behavior due to the presence of ferrocene and this redox behavior was diffusion controlled over the investigated scan range. The burning rate catalytic effect of G0, G1 and G2 on thermal decomposition of AP was investigated using thermogravimetry and differential thermogravimetry. G0, G1 and G2 showed good catalytic effect on the thermal decomposition of AP. Anti‐migration studies showed that migration of G0, G1 and G2 was much slower than that of 2,2‐bis(ethylferrocenyl)propane (catocene) and ferrocene.     

Synthesis，Crystal and Molecular Structure of 1，1＇－Bis（N－phenylhydroxyaminocarbonyl）ferrocene

Ｓｙｎｔｈｅｓｉｓ，ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆ１，１＇－Ｂｉｓ（Ｎ－ｐｈｅｎｙｌｈｙｄｒｏｘｙａｍｉｎｏｃａｒｂｏｎｙｌ）ｆｅｒｒｏｃｅｎｅ￥ＺｈａｎｇＷｅｎ；ＬｉＦｅｎｇ－Ｚｅ；ＬｉｕＱｉ－Ｗａｎｇ（Ｄｅｐａｒｔｍ...     

二茂铁基查尔酮衍生物的超快三阶非线性光学响应

合成三例二茂铁基查尔酮衍生物:1-二茂铁基-3-(5-溴噻吩-2-基)-2-丙烯-1-酮(1)、1-二茂铁基-3-(4-溴噻吩-2-基)-2-丙烯-1-酮(2)和1-二茂铁基-3-(5-氯噻吩-2-基)-2-丙烯-1-酮(3);采用1H NMR、13C NMR和HR-MS对化合物1～3进行了结构表征,并测定了其热学性质;运用密度泛函理论方法进行结构优化,并计算得到了它们的分子轨道能量和极化率;采用紫外-可见吸收光谱与Z-扫描技术(532nm,180fs)分别测定了三种化合物的线性和非线性光学性质。结果表明,化合物1～3的紫外吸收波长发生明显红移,且1的非线性吸收幅度、极化率和分子超极化率最大; 1、2和3均存在分子内电荷转移现象,表现出超快三阶非线性光学响应。     

Water-Mediated Epoxy/Surface Adhesion: Understanding the Interphase Region

Epoxy resins coatings are commonly found in corrosion protection coatings but the presence of water can affect their adhesion to the substrate, often weakening the adhesion of the coating to the solid, reducing its efficiency. Nevertheless, small amounts of water can enhance the epoxy/substrate interactions. In this work, the interphase region of an epoxy precursor and metal oxide substrates is investigated using molecular simulations and it is found that water accumulates between the epoxy layer and the solid substrate. At high water concentrations (9 wt %) the interaction between the epoxy precursor and the solid surface is weakened regardless of the nature of the solid, but at low water concentrations the nature of the solid surface becomes important. For hematite, the presence of water decreases the strength of adhesion but for goethite the presence of a small amount of water (3 wt %) enhances the adhesion to the surface resulting in a densification at the interface.     

Facile One-Pot Synthesis of Ferrocene-Based Spiropyrrolidines and Pyrrolizidines Through 1,3-Dipolar Cycloaddition Reaction

A facile and efficient synthesis of ferrocene-based spiroacenaphthenone pyrrolidines and pyrrolizidines through a one-pot, three component 1,3-dipolar cycloaddition reaction is described.