Grafting of commercially available amines bearing aromatic rings onto poly(vinylidene‐co‐hexafluoropropene) copolymers

The grafting of poly(VDF‐co‐HFP) copolymers with different amines containing aromatic rings, such as aniline, benzylamine, and phenylpropylamine, is presented. ¹⁹F NMR characterization enabled us to show that the sites of grafting of aromatic‐containing amines were first difluoromethylene of vinylidene fluoride (VDF) in the hexafluoropropene (HFP)/VDF/HFP triad and then that of VDF adjacent to HFP. The kinetics of grafting of benzylamine, monitored by ¹H NMR spectroscopy, confirmed those sites of grafting and showed that all VDF units located between two HFPs were grafted in the first 150 min, whereas those adjacent to one HFP unit were grafted in the remaining 3000 min. Parameters such as the temperature or the molar percentage of HFP in the copolymer had an influence on the maximum rate of grafted benzylamine. The higher the temperature, the higher the molar percentage of grafted benzylamine. Furthermore, the higher the molar percentage of HFP in the copolymer, the higher the molar percentage of VDF in the HFP/VDF/HFP triad, and the higher the molar percentage of grafted benzylamine. The spacer length between the aromatic ring and the amino group had an influence on the kinetics of grafting: aniline (pK_a = 4.5) could not add onto the polymeric backbone, whereas phenylpropylamine was grafted in the first 150 min, and benzylamine required 3000 min to reach the maximum amount of grafting. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1855–1868, 2006     

Radiooxidation of fluoropolymers: Identification of oxidation products

Radiation effects on fluoropolymers induced by high‐energy irradiation were investigated. Poly(fluorovinylidene‐co‐hexafluoropropylene) [P(VDF‐HFP)] films were irradiated with γ rays in air. Peroxy radicals formed by irradiation in the presence of oxygen were partially converted into more stable products such as hydroperoxides, alcohols, and acids. These oxidation products were identified by Fourier transform infrared spectroscopy. Specific chemical treatments were carried out to identify and separate overlapping absorption bands. Model compounds were also used. On the basis of the results, a mechanism of degradation for γ‐irradiated P(VDF‐HFP) is proposed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1509–1517, 2003     

Comprehensive Characterization of Chain End Groups of Vinylidene Fluoride Based Polymers

Summary: In this work an investigation of the chain end groups produced in the free radical copolymerization of vinilydene fluoride (VDF) and hexafluoropropylene (HFP) is performed. Type and amount of chain end groups are evaluated by a meticulous analytical characterization of VDF/HFP copolymer. At first pulsed gradient spin-echo nuclear magnetic resonance (spin-echo NMR) is used to identify all the chain end groups also at very low concentration (equal to 0.1 mmol · Kg⁻¹). The instrument sensitivity is increased of an order of magnitude in comparison with the traditional NMR. Moreover potentiometric titration and ion chromatography (IC) are also used to study the chain end groups and, as a consequence, the nature and the amount of the acidity showed by the polymer chains. In details two intensity of acidity are detected by potentiometric titration, namely strong and weak. The strong acidity is associated to the presence of residual surfactant and can be removed washing the polymer, while the weak acidity is due to free molecules of fluoride acid (HF). The standard ion chromatography facility is properly modified to quantify the fluoride in the polymer matrix without any pre extraction in water. Thanks to this the HF concentration in the polymer is evaluated with high accuracy. A detailed kinetic scheme for the VDF/HFP polymerization is also proposed taking into account all the findings obtained studying the chain end groups.     

The grafting of acrylamide onto poly(ε‐caprolactone) and poly(1,5‐dioxepan‐2‐one) using electron beam preirradiation. I. Influence of dose and Mohr's salt for the grafting onto poly(ε‐caprolactone)

Poly(ε‐caprolactone) films (TONE® 787) were irradiated by electron beam in air prior to grafting in aqueous solutions of acrylamide. The grafting kinetics and molecular weight of the grafted poly(acrylamide) chains were studied with irradiation doses between 2.5 and 20 Mrad and in the Mohr's salt concentration range of 0.0025–1 wt %. The grafting rate and yield were strongly dependent on the Mohr's salt concentration. By molecular weight analysis of grafted poly(acrylamide) chains, it was shown that the molecular weight is approximately proportional to the mass of the grafted PAAm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1643–1649, 1999     

Interphase/interface modification on the dielectric properties of polycarbonate/poly(vinylidene fluoride‐co‐hexafluoropropylene) multilayer films for high‐energy density capacitors

Unique three‐component multilayer films with ATBTATBTA configuration were fabricated using forced assembly multilayer coextrusion for novel dielectric systems. The dielectric breakdown strength, displacement–electric field hysteresis, and dielectric spectroscopy of 65‐layer polycarbonate (PC)/tie/poly(vinylidene fluoride‐co‐hexafluoropropylene) (P(VDF‐HFP)) were investigated with various tie materials. Three different tie materials, poly(methyl methacrylate) (PMMA), styrene‐co‐acrylonitrile copolymer with 30% acrylonitrile content (SAN30), and poly(ethylene terephthalate‐co‐1,4‐cycohexanedimethylene terephthalate) (PETG) were chosen owing to their various degrees of interaction with either P(VDF‐HFP) or PC. The 65‐layer PC/PMMA/P(VDF‐HFP) films exhibited a 25% enhancement in breakdown properties, 50% higher energy density, 40% smaller hysteresis loop areas, and orders of magnitude slower ion migration relative to the 33‐layer PC/P(VDF‐HFP) control. These property improvements are mainly attributed to the localized interactions at PMMA/P(VDF‐HFP) and PMMA/PC interfaces, forming interphase regions. The modified PMMA/P(VDF‐HFP) interphase region can effectively hinder the migration of impurity ions in P(VDF‐HFP), reducing their mobility within the layer. Additionally, a small fraction of PMMA can lead to slightly increased dielectric constant of the composite films owing to strong interaction between PMMA and P(VDF‐HFP). The other two systems with PETG and SAN30 as tie layers exhibited marginal improvements in dielectric properties owing to their weaker interactions with the P(VDF‐HFP) layers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 978–991     

Synthesis and characterization of fluorinated telomers containing vinylidene fluoride and hexafluoropropene from 1,6‐diiodoperfluorohexane

The synthesis of original fluorinated (co)telomers containing vinylidene fluoride (VDF) or VDF and hexafluoropropene (HFP) was achieved by radical telomerizations and (co)telomerizations of VDF (or VDF and HFP) in the presence of 1, 6‐diiodoperfluorohexane via a semisuspension process. tert‐Butyl peroxypivalate (TBPPi) was used as an efficient thermal initiator. The numbers of VDF and VDF/HFP base units in the (co)telomers were determined by ¹⁹F and ¹H NMR spectroscopy. They ranged from 10 to 190 VDF base units. Fluorinated telomers of various molecular weights (1200–12,600 g/mol) were obtained by the alteration of the initial [1,6‐diiodoperfluorohexane]₀/[fluoroalkenes]₀ and [TBPPi]₀/[fluoroalkenes]₀ molar ratios. The thermal properties of these fluorinated (co)telomers, such as the glass‐transition temperature and melting temperature, were examined. As expected, these telomers exhibited good thermal stability. They were stable at least up to 350 °C. The compounds containing more than 30 VDF units were crystalline, whereas all those containing VDF‐co‐HFP were amorphous with elastomeric properties, whatever the number was of the fluorinated base units. The structures of I–(VDF)_n–R_F–(VDF)_m–I and I–(HFP)_x(VDF)_n–R_F–(VDF)_m(HFP)_y–I (co)telomers were obtained, and the defects of the VDF chain and the ? CH₂CF₂I and ? CF₂CH₂I functionalities were studied successfully (where R_F = C₆F₁₂). The functionality in the iodine atoms was modified: the higher the VDF content in the telomers, the lower the normal end functionality (? CH₂CF₂I) and the higher the reversed extremity (? CF₂CH₂I). In addition, the percentage of defects increased when the number of VDF units increased. The molecular weights and molecular weight distributions of different telomers and cotelomers were also studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1470–1485, 2006     

Polymer Chain Conformation on Deuterated Polystyrene Nanoparticles Investigated by SANS

We previously reported that grafted polystyrene (PS) chains on silica nanoparticles at a low grafting density show similar conformations to free PS chains in the same solvent, THF (diameter ?50 nm, Colloid.poly.Sci. (2013), 291, 9, 2087–2099). As an extension of our previous study we choose an organic nanoparticle (deuterated polystyrene, dPS) instead of inorganic nanoparticle to see the impact of the substrate material on chain conformation. Additionally, a wider range of molecular weights were prepared to investigate the conformation feature of grafted PS chains more in detail. Small angle neutron scattering (SANS) experiments were performed to characterize PS grafted dPS particles in good solvent condition, with deuterated toluene and deuterated THF as solvent. To get insight into the conformation of the grafted PS layer we apply a scaling law describing the dimension of free PS polymer in good solvent condition to the obtained thickness of the grafted PS layer. We find an overall agreement with the scaling law where the thickness of the grafted PS layer is slightly larger than 2R_g of the free polymer chains in the respective solvent giving hint for semi dilute polymer brush (SDPB) situation.     

Fluorinated block copolymers containing poly(vinylidene fluoride) or poly(vinylidene fluoride‐co‐hexafluoropropylene) blocks from perfluoropolyethers: Synthesis and thermal properties

PFPE‐b‐PVDF and PFPE‐b‐poly(VDF‐co‐HFP) block copolymers [where PFPE, PVDF, VDF, and HFP represent perfluoropolyether, poly(vinylidene fluoride), vinylidene fluoride (or 1,1‐difluoroethylene), and hexafluoropropylene] were synthesized by radical (co)telomerizations of VDF (or VDF and HFP) with an iodine‐terminated perfluoropolyether (PFPE‐I). Di‐tert‐butyl peroxide (DTBP) was used and was shown to act as an efficient thermal initiator. The numbers of VDF and VDF/HFP base units in the block copolymers were assessed with ¹⁹F NMR spectroscopy. According to the initial [PFPE‐I]₀/[fluoroalkenes]₀ and [DTBP]₀/[fluoroalkenes]₀ molar ratios, fluorinated block copolymers of various molecular weights (1500–30,300) were obtained. The states and thermal properties of these fluorocopolymers were investigated. The compounds containing PVDF blocks with more than 30 VDF units were crystalline, whereas all those containing poly(VDF‐co‐HFP) blocks exhibited amorphous states, whatever the numbers were of the fluorinated base units. All the samples showed negative glass‐transition temperatures higher than that of the starting PFPE. Interestingly, these PFPE‐b‐PVDF and PFPE‐b‐poly(VDF‐co‐HFP) block copolymers exhibited good thermostability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 160–171, 2003     

A facile strategy to modify TiO2 nanoparticles via surface‐initiated ATRP of styrene

A core‐shell hybrid nanocomposites, possessing a hard core of nano titanium dioxide (n‐TiO₂) and a soft shell of brushlike polystyrene (PS), were successfully prepared by surface‐initiated atom transfer radical polymerization (ATRP) at 90 °C in anisole solution using CuBr/PMDETA as the catalyst, in the presence of sacrificial initiator. FTIR, ¹H NMR, XPS, TEM, SEM, TGA, and DSC were used to determine the chemical structure, morphology, thermal properties, and the grafted PS quantities of the resulting products. TEM images of the samples provided direct evidence for the formation of a core‐shell structure. The thermal stabilities of the grafted polymers were dramatically elevated relative to that of pristine PS according to TGA results. DSC results demonstrated that the TiO₂‐PS nanocomposites exhibited higher glass transition temperature (T_g) compared with pristine PS. The molecular weights of the free polymers formed by sacrificial initiator, which were similar to that of surface‐attached polymers were measured by GPC instrument which showed that the molecular weights of PS were well controlled with a relatively narrow polydispersity index (PDI < 1.2). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1782–1790, 2010     

Nanopattern formation on polymer substrate using star-hyperbranched nanospheres

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of 4-vinylbenzyl N,N-diethyldithiocarbamate as an inimer under UV irradiation. These hyperbranched PS exhibited large amounts of photofunctional dithiocarbamate groups on their outside surfaces. Subsequently, we derived the star-hyperbranched copolymers by grafting from hyperbranched macroinitiator with t-butyl methacrylate. We obtained poly(methacrylic acid) star-hyperbranched PS nanospheres by hydrolysis of poly(t-butyl methacrylate) grafted chains. We studied in detail two-dimensional nanopattern formation on poly(4-vinylpyridine) (P4VP) or partially quaternized P4VP substrate using such nanospheres by electrostatic interaction.     

Matrix‐grafted multiwalled carbon nanotubes/poly(methyl methacrylate) nanocomposites synthesized by in situ RAFT polymerization: A kinetic study

A new approach was developed to functionalize multiwalled carbon nanotubes (MWCNTs) with a polymerizable methyl methacrylate (MMA) groups, and the structure of functionalized MWCNTs were characterized by FTIR, Raman, XPS, and TEM. Using the strategy of “grafting through,” poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of MWCNTs during the in situ synthesis of MWCNT/PMMA nanocomposites over reversible addition‐fragmentation chain transfer (RAFT) polymerization. Kinetics of RAFT‐mediated polymerization of MMA in the presence of MMA‐grafted MWCNTs was studied by using gas chromatography and gel permeation chromatography. To further study, attached polymers were detached and their molecular characteristics were compared to freely formed chains. Results of kinetic studies showed that the utilized commercial chain transfer agent strictly reduced the rate of polymerization as well as relatively controlled molecular weights and narrow molecular weight distributions of free chains. MWCNTs showed a radical activity, retarding the polymerization and reducing the rate of reaction. The effect of MWCNTs concentrations on molecular weights and polydispersity indexes (PDI) was different at the surface and in the bulk. The molecular weights of free chains increased, and the PDI was decreased with increasing MWCNTs. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 555–569, 2012     

Preparation de membranes hydrophiles obtenues par le greffage de la n-vinylpyrrolidone dans le poly(chlorure de vinyle)

PVC films were radiation-grafted in NVP-methanol solutions. Unusual kinetics relations were observed: an increase in monomer concentration or in temperature decreased the reaction rate. These effects are attributed to a higher mobility of the growing chains leading to faster chain termination and resulting in a drop of the overall rate and shortening of grafted chains. The graft copolymers swell homogeneously in water and in methanol. The swelling rate and limiting swelling ratio increase linearly with the grafting ratio. The swelling ratio was found to depend on chain length, being higher for short chains. An irreversible increase of the swelling ratio was found by raising the temperature. These unusual swelling properties of the grafted films are attributed to strong interactions between pyrrolidone groups and the Cl atoms of the PVC.     

Copolymers of Starch and Polyacrylonitrile. Influence of Granule Swelling on Copolymer Composition under Various Reaction Conditions

Molecular weights and grafting frequencies of graft copolymers prepared with ferrous ammonium sulfate-hydrogen peroxide initiation showed a dependence on granule swelling similar to that found with ceric ammonium nitrate (increased swelling of starch granules decreased the number of grafted polyacrylonitrile chains and increased their average molecular weight). As with unswollen starch, the composition of the copolymer prepared from swollen starch was not influenced by granule size. Molecular weights of polyacrylonitrile branches grafted to swollen and unswollen starch were independent of reaction time; however, grafting frequencies with swollen and unswollen starch tended to converge toward a common value with increased reaction time and increased dilution. Data suggest that the influence of granule swelling on copolymer composition is due to a faster termination rate for growing polyacrylonitrile chains in unswollen starch.     

Grafting of Hexafluoropropylene onto Polytetramethylene Glycol by Radical Reaction

A well-defined modification of polytetramethylene glycol （PTMG） was realized by radical grafting with hexafluoropropylene （HFP）. The structure of grafted product was confirmed by means of IR, ^1H NMR and ^13C NMR. The effects of the amount of initiator, reaction time and temperature on the grafting HFP onto PTMG were investigated.     

Patterning nanocluster polystyrene brushes grafted from initiator cores on silicon surfaces by lithography processing

In this study, we formed grafted polystyrene (PS) brushes possessing nanocluster structures through atom transfer radical polymerization from initiator cores presented on Si surfaces that had been generated using reactive ion etching (RIE). We established the surface grafting polymerization kinetics of the nanoclustered PS chains on the Si surfaces to fit their experimentally determined thickness (ellipsometry) and number-average molecular weight (M _n) of “free” PS (gel permeation chromatography). The propagation rate (k _p) and active grafting species deactivation rate (k _d) were obtained from reactions involving styrene concentrations from 0.2 to 2 M. We also used scanning electron microscopy to observe the morphologies of the PS grafted to the surfaces after various reaction times at various styrene concentrations. The PS brushes grafted onto the Si surfaces under styrene concentrations of 0.2, 0.5, 1, and 2 M exhibited clustered structures having cluster diameters of 12, 28, 42, and 45 nm, respectively; from these observations, we calculated the critical grafting density. In addition, we generated highly dense, well-defined patterns of PS on patterned Si(100) surfaces through the use of a very-large-scale integration process involving electron beam lithography and RIE. We employed the RIE system to generate a high density of reactive species at the bottom of the trenches for graft polymerization. After 21 h of grafting, AFM imaging revealed dense line patterns of nanoclustered PS.     

Grafting of polymers onto and/or from silica surface during the polymerization of vinyl monomers in the presence of γ‐ray‐irradiated silica

The effects of radicals on silica surface, which were formed by γ‐ray irradiation, on the polymerization of vinyl monomers were investigated. It was found that the polymerization of styrene was remarkably retarded in the presence of γ‐ray‐irradiated silica above 60 °C, at which thermal polymerization of styrene is readily initiated. During the polymerization, a part of polystyrene formed was grafted onto the silica surface but percentage of grafting was very small. On the other hand, no retardation of the polymerization of styrene was observed in the presence of γ‐ray‐irradiated silica below 50 °C; the polymerization tends to accelerate and polystyrene was grafted onto the silica surface. Poly(vinyl acetate) and poly(methyl methacrylate) (MMA) were also grafted onto the surface during the polymerization in the presence of γ‐ray‐irradiated silica. The grafting of polymers onto the silica surface was confirmed by thermal decomposition GC‐MS. It was considered that at lower temperature, the grafting based on the propagation of polystyrene from surface radical (“grafting from” mechanism) preferentially proceeded. On the contrary, at higher temperature, the coupling reaction of propagating polymer radicals with surface radicals (“grafting onto” mechanism) proceeded to give relatively higher molecular weight polymer‐grafted silica. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2972–2979, 2006     

用原子力显微镜研究甲基丙烯酸缩水甘油酯在高密度聚乙烯表面的紫外接枝

利用AFM研究了紫外光引发甲基丙烯酸缩水甘油酯(GMA)在高密度聚乙烯(HDPE)表面接枝初期生成的接枝物的微结构, 对HDPE表面接枝反应的引发速率进行了初步研究. 紫外照射30 s后在HDPE表面形成一些接枝物微粒, 随着照射时间的增加, 微粒越来越多, 其体积也越来越大. 分析结果表明, 每一个接枝物微粒即为一个高度枝化甚至超级枝化的接枝聚合物链. 在30~45 s之间, 接枝密度随照射时间延长几乎呈线性增长; 在45 s后, 接枝密度的增长速度减慢. 在30~45 s之间的引发速度约为6.5 Unit/(μm2·s).     

Silica nanoparticle dispersions in homopolymer versus block copolymer

Silica nanoparticles (17 ± 4 nm in diameter) were modified by grafting polystyrene chains to the surfaces using atom transfer radical polymerization (ATRP). The molecular weight of the grafted chains ranged from 8 to 48 kDa. These modified nanoparticles were mixed in solution with poly(styrene) homopolymer (18–120 kDa) and symmetric poly(styrene‐b‐butadiene) (PS‐PB) diblock copolymer (34–465 kDa) and the states of dispersion in the dried composites were characterized by transmission electron microscopy (TEM). In the so‐called wet brush limit, when the graft molecular weight equals or exceeds the matrix value, the silica particles form a uniform random dispersion in poly(styrene). Increasing the homopolymer matrix, molecular weight above the graft value results in particle clustering and macroscopic‐phase separation. Mixtures of the lamellar forming block copolymer and nanoparticles exhibit a very different trend, with particle clustering at the lower PS‐PB molecular weights and dispersion at the highest value. This latter finding is rationalized on the basis of packing constraints associated with lamellar order and the effective particle dimensions, and the degree of solvation at ordering, both of which favor higher molecular weight block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2284–2299, 2007     

Effect of molecular weight on synthesis and surface morphology of high-density poly(ethylene glycol) grafted layers

This work describes studying the permanent grafting of carboxylic acid end-functionalized poly(ethylene glycol) methyl ether (PEG) chains of different molecular weights from the melt onto a surface employing poly(glycidyl methacrylate) ultrathin film as an anchoring layer. The grafting led to the synthesis of the complete PEG brushes possessing exceptionally high grafting density. The maximum thickness of the attached PEG films was strongly dependent on the length of the polymer chains being grafted. The maximum grafting efficiency was close to the critical entanglement molecular weight region for PEG. All grafted PEG layers were in the "brush regime", since the distance between grafting sites for the layers was lower than the end-to-end distance for the anchored macromolecules. Scanning probe microscopy revealed that the grafting process led to complete PEG layers with surface smoothness on a nanometric scale. Practically all samples were partly or fully covered with crystalline domains that disappeared when samples were scanned under water. Due to the PEG hydrophilic nature, the surface with the grafted layer exhibited a low (up to 21 degrees ) water contact angle.     

A density functional approach to retention in chromatography with chemically bonded phases

A density functional approach to the retention in a chromatography with chemically bonded phases is developed. The bonded phase is treated as brush built of grafted polymers. The chain molecules are modelled as freely jointed spheres. Segments of all components interact with the surface via the hard wall potential whereas interactions between the segments are described by Lennard-Jones (12-6) potential. The structure of the bonded phase is investigated. The distribution of different solutes in the stationary phases is determined. An influence of the following parameters on the retention is analyzed: the grafting density, the grafted chains length, the strength of molecular interactions, the solute sizes, temperature. The theoretical predictions are consisted with numerous experimental results.