Photophysical properties of Ru(II) bipyridyl complexes containing hemilabile phosphine-ether ligands

Emission and absorbance spectra, along with low-temperature excited-state lifetimes, were obtained for the hemilabile complexes, [Ru(bpy)2L](PF6)2 [L = (2-methoxyphenyl)diphenylphosphine (RuPOMe) (1) and (2-ethoxyphenyl)diphenylphosphine (RuPOEt) (2)] in solid 4:1 ethanol/methanol solution. Spectral data were evaluated with ground-state reduction potentials using Lever parameters. Lifetime data for these complexes were collected from 77 to 160 K, and the rate constant for the combined radiative and nonradiative decay process, k, the thermally activated process prefactor, k'(0), the rate constant for the MLCT --> d-d transition, k', and the activation energy, DeltaE', were calculated from a plot of ln(1/tau) versus 1/T for both (1) and (2). The low-temperature luminescence lifetimes of (1) were observed to decrease with increases in water concentration. The photophysical and kinetic data of (1) and (2) are compared to literature data for [Ru(bpy)3](PF6)2. The emission maxima of (1) and (2) are blue-shifted relative to [Ru(bpy)3](PF6)2 due to the presence of the strong-field phosphine ligand, which enhances pi back-bonding to the bipyridyl ligands. The thermal activation energy, DeltaE', is significantly larger for [Ru(bpy)3](PF6)2 than for (1) and (2) resulting in a faster MLCT --> d-d transition for (1) and (2). These results are discussed in the context of radiationless decay through thermally activated ligand-field states on the metal complex.     

Photophysical effect of the coordination of water by ruthenium(II) bipyridyl complexes containing hemilabile phosphine-ether ligands

A substantial concentration-dependent red shift of the absorption and emission spectra (77 K) of [Ru(bpy)(2)(POMe-P,O)](2+) (1) (POMe = (2-methoxyphenyl)diphenylphosphine) is reported. NMR experiments show this shift to be due to equilibration of 1 with an aquo complex (1b) (K(eff) = (6 +/- 3) x 10(-3)) that forms upon displacement of the coordinated ether in the hemilabile POMe ligand. The excited-state lifetimes of 1 and 1b at 77 K in solid 2:1 ethanol/acetone solution are tau = 2.13 +/- 0.02 and 1.95 +/- 0.02 mus, respectively. The preparation and X-ray crystal structure of a related complex, [Ru(bpy)(2)(PO(i)Pr-P)(OH(2))](PF(6))(2) (2b) (PO(i)Pr-P = (2-(2-propoxy)phenyl)diphenylphosphine), is also reported. In solution, this species exists as an equilibrium mixture of complexes that cannot be readily separated. This species also has concentration-dependent absorption spectra in 2:1 ethanol/acetone solution, with a significant red shift (20 nm) at lower concentrations.     

NiN(2)S(2) complexes as metallodithiolate ligands to Rh(I), Rh(II) and Rh(III)

Three molecular structures are reported which utilize the NiN(2)S(2) ligands -, (bis(mercaptoethyl)diazacyclooctane)nickel and -', bis(mercaptoethyl)diazacycloheptane)nickel, as metallodithiolate ligands to rhodium in oxidation states i, ii and iii. For the Rh(I) complex, the NiN(2)S(2) unit behaves as a bidentate ligand to a square planar Rh(I)(CO)(PPh(3))(+) moiety with a hinge or dihedral angle (defined as the intersection of NiN(2)S(2) and S(2)Rh(C)(P) planes) of 115 degrees . Supported by -' ligands, the Rh(II) oxidation state occurs in a dirhodium C(4) paddlewheel complex wherein four NiN(2)S(2) units serve as bidentate bridging ligands to two singly-bonded Rh(II) ions at 2.893(8) A apart. A compilation of the remarkable range of M-M distances in paddlewheel complexes which use NiN(2)S(2) complexes as paddles is presented. The Rh(III) state is found as a tetrametallic [Rh(-')(3)](3+) cluster, roughly shaped like a boat propeller and structurally similar to tris(bipyridine)metal complexes.     

Anionic and neutral rhodium(I) complexes containing trichlorostannato ligands

The complexes Et₄N[Rh(SnCl₃)₂(diolefin)(PR₃)] (diolefin = COD or NBD) have been isolated and their reactions studied. Reaction with arylic tertiary phosphines led to SnCl₃⁻ displacement and isolation of neutral pentacoordinated Rh(SnCl₃)(diolefin)(PR₃)₂ complexes. Reaction with carbon monoxide involved diolefin displacement when the diolefin was COD, thus giving Et₄N[Rh(SnCl₃)₂(CO)₂(PR₃)] compounds, but SnCl₃⁻ displacement when it was NBD, thus yielding Rh(SnCl₃)(CO)(NBD)(PR₃) complexes. The complexes [Rh(diolefin)Cl]₂ were found to react with triarylphosphines in the presence of SnCl₂ and with CO bubbling through the solution to give Rh(SnCl₃)(CO)(NBD)(PR₃) when the diolefin was NBD but Rh(Cl)(CO)(PR₃)₂ when the diolefin was COD.     

Copper(II) complexes containing hemilabile tridentate ligand as chromotropic probes

Two copper(II) complexes with the general formula [Cu(L)(H₂O)](ClO₄)₂ (1) and [Cu(L)₂](ClO₄)₂ (2), where L=3-((pyridin-2-ylmethyl)amino)propanamide, were synthesized and characterized by elemental analyses, IR, UV–vis spectroscopy techniques and molar conductance measurements. The crystal structures of the complexes were identified by single crystal X-ray diffraction analysis. The tridentate ligand L acts as an N₂O-donor through the nitrogen atoms of the pyridine and amine moieties as well the oxygen atom of the amide group. The copper(II) ions in both complexes have distorted octahedron structures so that the Cu(II) ion in 1 is coordinated by an aqua ligand and a tridentate ligand defining the basal plane, and by two oxygen atoms of the perchlorate ions occupying the axial positions. However, two ligands L are coordinated to the copper(II) ion in 2, where four nitrogen atoms of pyridine and amine groups occupy the equatorial positions and two oxygen atoms of the amide moieties exist in the apices. The chromotropism (halo-, solvato- and ionochromism) of both complexes were studied using visible absorption spectroscopy. The complexes are soluble in water and organic solvents and display reversible halochromism. The solvatochromism property is due to structural change followed by solvation of the vacant sites of the complexes. The complexes demonstrated obvious ionochromism and are highly sensitive and selective towards CN^? and N₃^? anions in the presence of other halide and pseudo-halide ions.     

New copper(I) isocyanide complexes containing other donor ligands

The preparation and physical properties of some new copper (I) isocyanide complexes containing other neutral donor ligands such as Ph₃P, pyridine(Py), 1,10- phenanthroline (Phen), bipyridine (Bipy), or 1,2-bis(diphhenylphosphino)ethane (Dipphos) are described. Possible structures for these new complexes, in the solid state and in solution, are discussed.     

A kinetic study of the ring-opening process in tungsten carbonyl complexes containing hemilabile metallodithiolate ligands

The synthesis of the metallodithiolate derivative of tungsten pentacarbonyl from the reaction of photogenerated W(CO)(5)THF and Ni-1 ((1,5-bis(2-mercapto-2-methylpropane)-1,5-diazacyclooctanato)nickel(II)) is described, along with its crystal structure. In N,N-dimethylformamide solution, the pentacarbonyl exists in equilibrium with its tetracarbonyl analogue and carbon monoxide. The pentacarbonyl complex stereoselectively loses cis carbonyl ligands, as is apparent from (13)CO-labeling studies, where the thus-formed tetracarbonyl tungsten complex resulting from chelate ring-closure is preferentially (13)CO-labeled among the two mutually trans CO groups. The kinetics of the addition of CO to the tetracarbonyl to afford the metal pentacarbonyl were monitored by means of in situ infrared spectroscopy in the nu(CO) region at CO pressures between 28 and 97 bar and temperatures over the range 45-60 degrees C. Under these conditions, there was no evidence for W-S bond cleavage in the pentacarbonyl complex with concomitant formation of W(CO)(6). These studies reveal that the tetracarbonyl complex and CO are only slightly unstable with respect to the formation of the pentacarbonyl complex, with an equilibrium constant at 50 degrees C of about 2.8 M(-1) or DeltaG degrees = -1.4 kJ/mol. The activation parameters determined for the ring-opening process (DeltaH = 89.1 kJ/mol and DeltaS = -37.2 J/mol.K) suggest a solvent-assisted concerted ring-opening mechanism.     

Gold(I) complexes containing ionic phosphine ligands with a cobaltocenium backbone

The reaction of [(η⁵-R₂PC₅H₄)₂Co][PF₆] with (Me₂S)AuCl (1:2) resulted in {[(η⁵-R₂PC₅H₄)₂Co](AuCl)₂}[PF₆] (R = Ph, Cy, or ⁱ Pr). With a 1:1 ratio of [(η⁵-R₂PC₅H₄)Co(η⁵-C₅H₅)][PF₆] to (Me₂S)AuCl, yellow crystalline {[(η⁵-R₂PC₅H₄)Co(η⁵-C₅H₅)](AuCl)}[PF₆] was produced. The reaction of {[(η⁵-Cy₂PC₅H₄)Co(η⁵-C₅H₅)](AuCl)}[PF₆] with phenyl acetylene gave {[(η⁵-Cy₂PC₅H₄)Co(η⁵-C₅H₅)][Au(C≡C–Ph)]}[PF₆], while the reaction of {[(η⁵-Cy₂PC₅H₄)₂Co](AuCl)₂}[PF₆] with phenyl acetylene produced the unusual ionic complex {[(η⁵-Cy₂PC₅H₄)₂Co][Au(C≡C–Ph)]₂}[Au(C≡C–Ph)₂]. The structure of this complex has been characterized by X-ray crystallography, and a possible pathway for its formation is suggested. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Plasticity of the nickel(II) coordination environment in complexes with hemilabile phosphino thioether ligands

A series of homoligated Ni(II) complexes formed from two phosphino thioether (P,S) chelating ligands has been synthesized and characterized. Interestingly, this included octahedral Ni(II) complexes which, unlike previously characterized d(8) Rh(I), Pt(II), and Pd(II) analogues, exhibit in situ exchange processes centered around chloride ligand dissociation. This was verified and studied through the controlled abstraction from and introduction of chloride ions to this system, which showed that these processes proceed through complexes with square pyramidal, tetrahedral, and square planar geometries. These complexes were studied with a variety of characterization methods, including single-crystal X-ray diffraction studies, solution (31)P{(1)H} NMR spectroscopy, UV-vis spectroscopy, and DFT calculations. A general set of synthetic procedures that involve the use of coordinating and noncoordinating counteranions, as well as different hemilabile ligands, to mediate geometry transformations are presented.     

Trans-bis(difluoroborondimethylglyoximato) cobalt(III) complexes containing imidazole and chloride or thiocyanate as axial ligands

Halo- and pseudohalocobaloxime complexes [Co(DH)₂(Im)(X)] (X = Cl or CNS), containing imidazole (Im) or its derivatives, interact with BF₃·Et₂O to form a series of cobalt(III) complexes, [Co(DBF₂)₂(Im)(X)], that contain a 14-membered macrocyclic ligand. These light coloured microcrystalline solid complexes, stable under ordinary conditions, were characterized on the basis of elemental analyses, conductivity measurements, electronic, IR, NMR and mass spectra, and thermogravimetric and cyclic voltammetric studies, and are shown to posses a six-coordinated trans-octahedral configuration. The mass spectra do not reveal any molecular-ion peak whereas the results of thermolyses reveal the decreased stability of these complexes compared to the corresponding cobaloximes and yield polymeric intermediates, and finally forming Co₃O₄ as the end product. Cyclic voltammetric studies show four reductive waves and an oxidative wave, confirming an oxidation number of III for the central cobalt atom.     

Photophysical properties of copper(I) and zinc(II) complexes containing phosphinoquinoline ligands

Several copper(I) and zinc(II) complexes with 8-(diphenylphosphino)quinoline (PPh₂qn) or 8-diphenylphosphinoquinaldine (PPh₂qna) have been prepared. These ligands contain both imine and phosphine moieties, which can act as coordinating groups. X-ray analysis of the Cu(I) complexes reveals that [Cu(PPh₂qn)₂]PF₆ (Cu-1) and [Cu(PPh₂qn)₂]PF₆ (Cu-2), coordinated by two PPh₂qn and PPh₂qna ligands respectively, are obtained. In the Zn(II) complexes, a structural study shows that [ZnCl₂(PPh₂qn)] (Zn-1), [ZnBr₂(PPh₂qn)] (Zn-2) and [ZnI₂(PPh₂qn)] (Zn-3) are coordinated by one PPh₂qn ligand and two of the corresponding halogeno ligands (Cl⁻, Br⁻ and I⁻). In the solid state Cu-1 and Cu-2 show luminescence which is assigned to a ³MLCT transition involving π∗ of the quinoline group, as shown in the [Cu(dmp)(diphosphine)]⁺ complexes; due to the reduced bulkiness of the coordination sphere around the copper atom, no emission is observed in solution. Zn-1 shows a similar emission band to that of free PPh₂qn at both room temperature and 77 K. It suggests the emission bands should be assigned to a ligand-centered (LC) transition. In the solid state, it is found that the emissive energy of the complexes shift to lower energy and the energy depends on the halogeno ligands in the zinc complexes.     

Some new rhodium(I)-iridium(III) complexes with bridging hydride and chloride ligands

[IrH₅(PEt₃)₂] reacts with [(PR₃)₂Rh(μ₂-Cl)₂(PR₃)₂] (PR₃ = PEt₃ or 2 PR₃ = Ph₂PCH₂CH₂PPh₂) to give the hydrido-bridged binuclear species [(PR₃)₂Rh(μ₂-H)(μ₂-Cl)IrH₂(PR₃)₂] which show catalytic activity in alkene hydrogenation.     

Oxidative addition of MeI to cationic Rh(I) carbonyl complexes with pyridyl bis(carbene) ligands

A series of cationic Rh(I) carbonyl complexes of the form [Rh(CO)(L)]PF₆ (where L = 2,6-bis (alkylimidazol-2-ylidene)-pyridine; alkyl = Me (1a), Et (1b), CH₂Ph (1c)) have been prepared by the reactions of [Rh(CO)₂(OAc)]₂ with diimidazolium pyridine salts in the presence of NEt₃. The ν(CO) values for 1 are ca. 1982 cm⁻¹, indicating that the N-heterocyclic carbene ligands impart high electron density on the Rh(I) centres, despite the overall cationic charge. Each of the Rh(I) complexes reacts with MeI to form two isomeric Rh(III) methyl species, and a third unidentified species. Kinetic measurements on the MeI oxidative addition reactions give second-order rate constants (MeCN, 25 °C) of 0.0927, 0.0633 and 0.0277 M⁻¹ s⁻¹ for 1a, 1b and 1c, respectively. Comparison of these data with those for related Rh(I) carbonyl complexes shows that 1 have remarkably high nucleophilicity for cationic species.     

Chiral bisphospholane ligands (Me-ketalphos): synthesis of their Rh(I) complexes and applications in asymmetric hydrogenation

Rhodium complexes of functionalized bisphospholane ligands (S,S,S,S-Me-ketalphos) 1 and (R,S,S,R-Me-ketalphos) 2 have been used as catalyst precursors for the asymmetric hydrogenation of several different types of functionalized olefins and have achieved high enantioselectivities.     

Di and monocarbonyl complexes of rhodium(I) containing singly charged bidentate ligands

Summary A series of neutral square planar rhodium(I) dicarbonyls containing singly charged bidentate ligands (salicylaldoxime, -benzoinoxime, -furildioxime, -benzildioxime, dimethylglyoxime, cupferron) has been prepared from three sources: (i) tetracarbonyl--dichlorodirhodium(I), (ii) solutions of hydrated rhodium chloride in DMF held under reflux and (iii) a carbonylated solution of hydrated rhodium chloride in boiling absolute alcohol. These dicarbonyls react with triphenylphosphine,-arsine and -stibine to yield monocarbonyl derivatives. The monocarbonyls form 1 : 1 adducts with TCNE. All complexes have been characterized by elemental analysis, i.r. and uv-visible spectra.     

Tetramethylcyclobutadienecobalt(I) complexes containing pyrazolate or tetrazolate ligands with various coordination modes

Treatment of Cb^∗Co(CO)₂I (Cb^∗ = η⁴-C₄Me₄) with one equivalent of potassium 3,5-dimethylpyrazolate (Me₂pzK) or potassium 3,5-bis(trifluoromethyl)pyrazolate ((CF₃)₂pzK) in tetrahydrofuran at 0 °C afforded (η⁴-C₄Me₄(Me₂pz))Co(CO)₂ and Cb^∗Co((CF₃)₂pz)(CO)₂ in 90 and 71% yields, respectively. Treatment of Cb^∗Co(CO)₂I with one equivalent of Me₂pzH followed by the addition of one equivalent Me₂pzK in tetrahydrofuran afforded Cb^∗Co(Me₂pzH)(Me₂pz)(CO) in 74% yield. The reaction of Cb^∗Co(CO)₂I with one equivalent of potassium phenyl tetrazolate (PhtetzK) in tetrahydrofuran at 0 °C afforded [Cb^∗Co(Phtetz)(CO)]₂ in 44% yield. The solid state structure of (η⁴-C₄Me₄(Me₂pz))Co(CO)₂ revealed nucleophilic addition of a pyrazolate nitrogen atom to a Cb^∗ ligand carbon atom to afford a novel tetradentate ligand that bonds to the cobalt ion through an η³-π-allyl interaction and one pyrazolyl nitrogen atom. Two carbonyl ligands are also present. An X-ray crystal structure determination of Cb^∗Co((CF₃)₂pz)(CO)₂ showed η¹-coordination of the (CF₃)₂pz ligand and η⁴-coordination of the Cb^∗ ligand. The solid state structure of Cb^∗Co(Me₂pz)(Me₂pzH)(CO) is monomeric with one η¹-Me₂pz, one η¹-Me₂pzH, two carbonyl, and one η⁴-Cb^∗ ligands. The η¹-Me₂pz and η¹-Me₂pzH ligands are linked by a hydrogen bond involving the uncoordinated nitrogen atoms. The X-ray crystal structure determination of [Cb^∗Co(Phtetz)(CO)]₂ showed a dimeric molecular structure with two μ:η¹,η¹-Phtetz ligands connected to the cobalt ions through the 2- and 3-nitrogen atoms, one η⁴-Cb^∗ ligand, and one carbonyl ligand per cobalt center. (η⁴-C₄Me₄(Me₂pz))Co(CO)₂ is highly volatile and sublimes at 60 °C/0.03 Torr.     

Structure and emission properties of mixed-ligand Cu(I) complexes containing phosphinesulfide ligands

Mixed-ligand Cu(I) complexes containing phosphinesulfide ligands were synthesized, and the structure and emission properties were studied for the Cu(I) complexes. X-ray crystallographic study showed that a chelating phosphinesulfide and diimine are coordinated to Cu(I) center. Coordination geometry around Cu(I) center of each complex is described as a distorted tetrahedron. Some of the complexes show photoluminescence in the solid state.