芪3在铅-锡-氟磷酸盐玻璃中的聚集及光谱特性

采用低温熔融法制备了有机染料芪3掺杂的不同浓度的铅-锡-氟磷酸盐玻璃,通过对掺杂玻璃激发光谱、发射光谱和吸收光谱的测试,研究了芪3在无机玻璃中的聚集状态和光谱性能。 结果表明,有机染料芪3以单体和二聚物的形式共存于无机玻璃中,和芪3单体分子的激发峰相比,二聚物的激发峰位于短波段,随掺杂浓度的增加,掺杂玻璃的发射峰发生红移,同时在荧光光谱中观察到浓度猝灭现象;芪3分子与无机玻璃通过亲水作用发生了键合,从而导致芪3在无机玻璃中的吸收光谱和发射光谱比在乙醇溶液中出现较大红移;与芪3在乙醇溶液中的荧光强度相比,芪3分子受无机玻璃的“笼”化作用有效的提高了其荧光强度。     

有机染料掺杂玻璃的制备及荧光性能

铅-锡-氟磷酸盐玻璃是各种激光染料及非线性染料的理想基质,本文报道了荧光素及吖啶红掺杂铅-锡-氟磷酸盐玻璃的荧光性能,并且将吖啶红掺入有机改性的钛凝胶(TiO2-Ormosil),对两者的荧光性能进行了比较。     

非金属元素掺杂锐钛矿TiO_2(101)表面对提升NH_3光学气敏传感特性的影响

本文采用第一性原理平面波超软赝势的方法,模拟计算了含氧空位锐钛矿TiO_2(101)表面单掺杂非金属C元素、N元素、F元素以及双掺杂C-N元素、C-F元素、N-F元素后表面的氧化还原能力,分析对NH_3分子吸附的微观机理,研究杂质掺入对光学传感特性的影响.结果表明:非金属元素是比较容易掺入到锐钛矿TiO_2(101)表面,掺杂表面对NH_3分子吸附较未掺杂的表面要好,表面吸附NH_3分子后,吸附距离都出现缩短,C-N元素掺杂后吸附距离最小且吸附能最大;通过Mulliken电荷布居分布分析,C掺杂提升了表面的氧化性,N元素对表面的氧化性提升不明显,而F掺杂降低了表面的氧化性;通过态密度分析可知,C掺杂在禁带中产生了受主能级,而N掺杂提高了价带顶的电子态密度,F掺杂在导带底产生了施主能级;通过光学性质的分析可知:C掺杂提升了材料对低能可见光的响应,使材料对570 nm～760 nm范围内的可见光吸收提高了大约3.5倍;而C-N双掺杂体系,使材料对400 nm～570 nm范围内的可见光吸收提高了大约3倍.总的来说,单掺杂C元素以及双掺杂C-N元素都能明显的提高材料的光学气敏传感特性.     

表面增强能量转移效应的研究

通过分析2、2′菁染料水溶液、银胶体以及2、2′菁染料吸附于银胶表面时的吸收光谱得知,2、2′菁染料吸附于银胶表面时,有J聚集体出现,通过分析基频及高阶线性Raman光谱,证实了一些低波数的Raman信号是由J聚集体产生的,从而进一步证实了吸附于银胶表面的2、2′菁染料以单体和J聚集体形式共存.同时,由吸收光谱还可以看出,2、2′菁染料分子及其J聚集体分子的吸收带都处于银胶吸收带的半高宽范围内,满足共振条件,当用不同激发波长(514.5 nm和488 nm)的光激发吸附于银胶表面的2、2′菁染料时,观察到了J聚集体的敏化荧光,而用此激发光激发2、2′菁染料水溶液时,就没有观察到J聚集体的敏化荧光,从而说明了银胶表面的存在,加速了单体2、2′菁染料分子与其J聚集体分子之间的能量转移速率.     

非金属元素掺杂锐钛矿TiO_2(101)表面对提升NH_3光学气敏传感特性的影响

本文采用第一性原理平面波超软赝势的方法,模拟计算了含氧空位锐钛矿TiO_2(101)表面单掺杂非金属C元素、N元素、F元素以及双掺杂C-N元素、C-F元素、N-F元素后表面的氧化还原能力,分析对NH_3分子吸附的微观机理,研究杂质掺入对光学传感特性的影响.结果表明:非金属元素是比较容易掺入到锐钛矿TiO_2(101)表面,掺杂表面对NH_3分子吸附较未掺杂的表面要好,表面吸附NH_3分子后,吸附距离都出现缩短,C-N元素掺杂后吸附距离最小且吸附能最大;通过Mulliken电荷布居分布分析,C掺杂提升了表面的氧化性,N元素对表面的氧化性提升不明显,而F掺杂降低了表面的氧化性;通过态密度分析可知,C掺杂在禁带中产生了受主能级,而N掺杂提高了价带顶的电子态密度,F掺杂在导带底产生了施主能级;通过光学性质的分析可知:C掺杂提升了材料对低能可见光的响应,使材料对570 nm～760 nm范围内的可见光吸收提高了大约3.5倍;而C-N双掺杂体系,使材料对400 nm～570 nm范围内的可见光吸收提高了大约3倍.总的来说,单掺杂C元素以及双掺杂C-N元素都能明显的提高材料的光学气敏传感特性.     

掺杂有机染料的铅锡氟磷酸闪烁玻璃及其在伽马激发下的发光

制备了掺杂有机染料芪420的铅锡氟磷酸盐杂化闪烁玻璃(lead tin fluorophosphates,简记为PTFP),测量其玻璃转变温度为75℃,染料在玻璃中的荧光发射峰位为446nm.测量了几种掺杂浓度的闪烁玻璃在⁶⁰Co源1.25MeV伽马射线激发下的发光,并和同样厚度的有机闪烁体ST401的发光进行比较,约为ST401发光的1%—2%. 关键词： 铅锡氟磷酸 闪烁玻璃 芪420 伽马     

非金属元素掺杂锐钛矿TiO_2(101)表面对提升NH_3光学气敏传感特性的影响

本文采用第一性原理平面波超软赝势的方法,模拟计算了含氧空位锐钛矿TiO_2(101)表面单掺杂非金属C元素、N元素、F元素以及双掺杂C-N元素、C-F元素、N-F元素后表面的氧化还原能力,分析对NH_3分子吸附的微观机理,研究杂质掺入对光学传感特性的影响.结果表明:非金属元素是比较容易掺入到锐钛矿TiO_2(101)表面,掺杂表面对NH_3分子吸附较未掺杂的表面要好,表面吸附NH_3分子后,吸附距离都出现缩短,C-N元素掺杂后吸附距离最小且吸附能最大;通过Mulliken电荷布居分布分析,C掺杂提升了表面的氧化性,N元素对表面的氧化性提升不明显,而F掺杂降低了表面的氧化性;通过态密度分析可知,C掺杂在禁带中产生了受主能级,而N掺杂提高了价带顶的电子态密度,F掺杂在导带底产生了施主能级;通过光学性质的分析可知:C掺杂提升了材料对低能可见光的响应,使材料对570 nm～760 nm范围内的可见光吸收提高了大约3.5倍;而C-N双掺杂体系,使材料对400 nm～570 nm范围内的可见光吸收提高了大约3倍.总的来说,单掺杂C元素以及双掺杂C-N元素都能明显的提高材料的光学气敏传感特性.     

表面非金属掺杂对锐钛矿相TiO2(101) 面吸附NH3特性的影响

采用基于密度泛函理论(DFT-D)体系下的第一性原理平面波超软赝势方法,研究了被不同非金属（B、C、N、F）掺杂的TiO2(101)表面吸附NH3的特性与作用机理。研究发现：被非金属掺杂后的表面对NH3的吸附效果要优于未掺杂表面。不同元素掺杂对比发现：C掺杂后的表面吸附能最大,稳定后吸附距离最小,为最稳定吸附结构。通过Mulliken电荷分布和分态密度的分析,得到了不同吸附条件下NH3在TiO2掺杂表面的催化氧化还原作用机理,并发现各模型吸附能的不同是由于掺杂（X）位原子与NH3分子的相互作用强弱不同所造成。掺杂原子在费米面附近的电子态密度贡献越强,掺杂原子与NH3分子电荷转移的净值越小,吸附距离越小,吸附能越大,吸附更稳定。     

表面非金属掺杂对锐钛矿相TiO_2(101)面吸附NH_3特性的影响

采用基于密度泛函理论(DFT-D)体系下的第一性原理平面波超软赝势方法,研究了被不同非金属(B、C、N、F)掺杂的TiO_2(101)表面吸附NH_3的特性与作用机理.研究发现:被非金属掺杂后的表面对NH_3的吸附效果要优于未掺杂表面.不同元素掺杂对比发现:C掺杂后的表面吸附能最大,稳定后吸附距离最小,为最稳定吸附结构.通过Mulliken电荷分布和分态密度的分析,得到了不同吸附条件下NH_3在TiO_2掺杂表面的催化氧化还原作用机理,并发现各模型吸附能的不同是由于掺杂(X)位原子与NH_3分子的相互作用强弱不同所造成.掺杂原子在费米面附近的电子态密度贡献越强,掺杂原子与NH_3分子电荷转移的净值越小,吸附距离越小,吸附能越大,吸附更稳定.     

表面非金属掺杂对锐钛矿相TiO2(101) 面吸附NH3特性的影响

采用基于密度泛函理论(DFT-D)体系下的第一性原理平面波超软赝势方法,研究了被不同非金属（B、C、N、F）掺杂的TiO2(101)表面吸附NH3的特性与作用机理。研究发现：被非金属掺杂后的表面对NH3的吸附效果要优于未掺杂表面。不同元素掺杂对比发现：C掺杂后的表面吸附能最大,稳定后吸附距离最小,为最稳定吸附结构。通过Mulliken电荷分布和分态密度的分析,得到了不同吸附条件下NH3在TiO2掺杂表面的催化氧化还原作用机理,并发现各模型吸附能的不同是由于掺杂（X）位原子与NH3分子的相互作用强弱不同所造成。掺杂原子在费米面附近的电子态密度贡献越强,掺杂原子与NH3分子电荷转移的净值越小,吸附距离越小,吸附能越大,吸附更稳定。     

二苯乙烯衍生物的制备及结构-光学性能关系的研究

有机共轭材料由于在电子、非线性光学和发光领域具有广泛应用,引起人们广泛兴趣。苯乙烯衍生物是一类重要的有机共轭化合物。文章采用相转移Wittig反应和钯催化Heck反应合成了三种不同取代基二苯乙烯衍生物。研究了分子结构与电子吸收光谱和材料发光性能关系。同没有取代基的化合物3a相比(电子最大吸收峰波长358 nm),化合物3c中CH₃取代导致电子吸收光谱轻微红移到356 nm,硝基取代的化合物3b呈现出更大的吸收光谱红移现象,电子吸收最大峰红移到388 nm。同时发现：CH₃取代的化合物3c产生荧光发射峰在414 nm,同没有取代基的化合物3a相比,荧光发射强度明显增强;相反具有吸电子NO₂取代基的化合物3b荧光发射峰位于525 nm, 荧光发射强度明显减弱。可见二苯乙烯分子中取代基结构对分子光学性能产生重要影响。这为发光材料的分子设计提供新的思路。     

Quantum-chemical study of the spectral properties of stilbene isomers

Calculations of absorption spectra of cis-and trans-forms of stilbene by the quantum-chemical method of intermediate neglect of differential overlap with spectroscopy parametrization were carried out. The electron structure of a stilbene molecule was studied and energy-level diagrams were drawn and analyzed. Rate constants of different photophysical processes occurring in a stilbene molecule after absorption of a photon were calculated in relation to the molecule conformation. On the basis of the obtained results, possible configurations of photoisomer molecules were considered and the most probable configurations of excited stilbene molecules were determined. It was shown how the change in the configurations of cis-and trans-forms of stilbene affects its spectral properties.     

水溶胶CdSe/CdS核/壳结构纳米晶制备及光学性质的研究

以巯基乙酸为稳定剂在水溶液中合成了水溶胶CdSe/CdS核/壳结构的量子点,利用X射线粉末衍射(XRD)和X射线光电子能谱(XPS)对量子点结构进行了表征;并对化学组成和尺寸分布进行了研究。通过紫外-可见吸收光谱、激发光谱与发射光谱研究了它们的发光特性。     

Nonlinear optical properties of stilbene and azobenzene derivatives containing azaphosphane groups

We have studied the nonlinear optical (NLO) properties of some donor–acceptor molecules with stilbene and azobenzene molecules as backbone. We have used the nitro group as the acceptor and azaphosphane (R₃P=N–) as the donor group. To study the effect of variation of NLO properties, we have replaced the substituents (Rs) connected to the phosphorus atom by methyl, amine and phenyl groups. We find that both first-order polarizability and hyperpolarizabilities are larger for stilbene derivatives and is maximum for the phenyl substitution. Second-order polarizability is higher for methyl substitution. We have also obtained the two-photon absorption cross-section for these molecules. We find that both one-photon and two-photon absorption cross-sections are maximum for the same excited state (first excited state in the case of stilbene and second excited state in the case of azobenzene derivatives).     

Coaxial laser cladding on an inclined substrate

This paper describes an experimental and theoretical study of the cladding mode of coaxial laser cladding on an inclined substrate. Based on the image analysis of the powder stream and clad profile measurements in coaxial laser cladding, it was found that irregular clad profiles always formed on an inclined surface and the location of the peak profile shifted away from the clad center. This phenomenon is caused by uneven distributions of powder concentration and laser beam intensity. A modified Gaussian mode for powder stream and laser beam was proposed to estimate the clad profiles on an inclined plane under laser beam irradiation. The effects of the inclined steel substrate on the CO₂ laser beam absorption and stainless-steel powder catchment were examined experimentally. The results show that both the laser absorption and the powder catchment on the mild steel decrease with increasing the cladding angle. From the analysis of laser beam mode, the clad width is equivalent to the beam spot size on the inclined substrate. However, the clad height correlates well with the distribution of the powder concentration. The results show that the Gaussian cladding mode could be adopted in various laser cladding applications such as rapid prototyping and butt welding to predict the clad profiles precisely.     

可逆光异构化双分子层及结构转变的振动光谱

通过吸收,荧光,FT红外,示差扫描量热和X光研究了双链二苯乙烯两亲分子的聚集和光异构化,获得了固态和两个溶液相的双分子层厚度,振动光谱显示在反式二苯乙烯双层的固态和溶液相中存在反式排列的氢键,而在用365nm光照后的溶液相中氢键主要是顺式排列的。亚甲基链伸缩振动则表明烷基链非常有序的排列。     

Stilbene composite scintillators as detectors of fast neutrons emitted by a 252Cf source

The results of the measurements are presented of the relative efficiency ε for ²⁵²Cf fast neutron detection by composite detectors based on stilbene crystalline grains. The effects of the grain size and height of the composite detector on its scintillation properties were studied. It is shown that the efficiency of fast neutron detection of stilbene composite scintillators ranges up to 60% of that of bulk single crystals. The results are also presented for relative light output measurements of stilbene composite detectors irradiated by gamma photons of ¹³⁷Cs, as well as transmittance data of samples in the range of their transparency absorption.     

KBM method based on the homotopy analysis

The KBM method is effective in solving nonlinear problems.Unfortunately,the traditional KBM method strongly depends on a small parameter,which does not exist in most of the practice physical systems.Therefore this method is limited to dealing with the system with strong nonlinearity.In this paper we present a procedure to study the resonance solutions of the system with strong nonlinearities by employing the homotopy analysis technique to extend the KBM method to the strong nonlinear systems,and we also ana...     

Two-photon absorption and broadband optical limiting with bis-donor stilbenes

Large two-photon absorptivities are reported for symmetrical bis-donor stilbene derivatives with dialkylamino or diphenylamino groups. These molecules exhibit strong optical limiting of nanosecond pulses over a broad spectral range in the visible. Relative to bis(di-n-butylamino)stilbene, bis(diphenylamino)stilbene exhibits a 90-nm red shift of its optical limiting band but only a minimal shift of ~13 nm of its lowest one-photon electronic absorption band. Mixtures of these compounds offer an unprecedented combination of broad optical limiting bandwidth and high linear transparency.