Triton X-100/CTAB在乙二醇/水混合溶剂中的热力学性质和胶团化行为

利用表面张力法, 研究了非离子表面活性剂Triton X-100和离子表面活性剂十六烷基三甲基溴化铵(CTAB)混合体系在混合极性溶剂乙二醇/水(乙二醇的体积分数分别为5%、10%和20%)中的热力学性质和胶团化行为. 结果表明, 混合体系在乙二醇水溶液中存在协同效应, 临界胶束浓度随乙二醇含量的增加而增大. 利用Rubingh和Maeda模型计算了混合物中各组分在胶团相中的组成、相互作用参数以及自由能的贡献. 在实验研究的乙二醇浓度范围内, 发现该非离子/离子混合体系在离子组分摩尔分数约为0.3时, 协同效应最强.     

Triton X-100/C10H21OH/H2O体系微乳液与溶致液晶

关于离子型表面活性剂生成的微乳液与溶致液晶已有不少研究，非离子型表面活性剂生成的微乳液与港致液晶的应用正在引起人们的重视，但由于药物提纯的困难，对其物理化学性质的研究还不多见．本文以非离子表面活性剂TritonX－100／C10H21OH／H2O体系为例，研究了非离子型表面活性剂微乳液和溶致液晶的生成及其结构特性．1实验部分试剂ThitonX－100（Aldrich公司，分析纯）正癸醇（分析纯）、水为一次蒸馏水微乳液区域和层状液晶区域的确定方法及小角x射线衍射测定方法同文献，实验温度20±0．1℃．2结果与讨论2·IThtonX－100、CIOH…     

乙二醇对烷基三甲基溴化铵胶团化行为的影响

利用电导法研究了烷基三甲基溴化铵表面活性剂(CnTAB,n=12,14,16),即十二烷基三甲基溴化铵(DTAB),十四烷基三甲基溴化铵(TTAB)和十六烷基三甲基溴化铵(CTAB),在混合极性溶剂乙二醇/水(体积分数0～40%)中的胶团化行为。考察了温度对胶团形成的影响,应用相分离模型估算了三个表面活性剂的胶团热力学参数。结果表明临界胶团浓度(cmc)和反离子解离度(α)都随乙二醇组分的增加而增大。在乙二醇/水混合溶剂中胶团形成的标准吉布斯自由能相差很小,混合焓都是负值,而混合熵都为正值,说明焓-熵补偿效应在胶团形成中起主导作用。     

C16mimBr／Triton X-100混合体系的表面性质和胶团化行为

通过测定表面张力,研究了离子液体型表面活性剂溴化1-十六烷基-3-甲基咪唑（C16mimBr）和非离子表面活性剂TritonX-100（TX100）混合体系分别在水溶液和20％乙二醇（体积分数）水溶液中的表面性质和胶团化行为．结果表明,混合体系在水溶液和20％乙二醇水溶液中都存在协同效应,乙二醇的加入降低了协同作用,混...     

甲酰胺与正负离子表面活性剂有序溶液的研究

对羧酸钠与烷基三甲基溴化铵1：1混合体系的研究表明：常温下各体系在不同比例甲酰胺（FA）／水混合溶剂中，表面张力随浓度变化均有明显的转折点，显示了混合体系中胶团的存在．实验中发现随混合溶剂中FA比例增加，各体系的临界胶团浓度（cmc）增大．在较高温度下发现在甲酰胺中亦存在着因胶团形成而产生的表面张力-浓度对数（γ－logc）曲线的转折点，利用相分离模型对体系胶团热力学参数进行了计算．并探讨了FA对正负离子表面活性剂囊泡的影响．     

核磁共振法研究全氟羧酸铵在非水介质中的胶束化

离子型表面活性剂在水中和在非极性溶剂中的胶束化已成为许多研究的课题。离子型表面活性剂在水中,或在具有两个氢键的极性溶剂中(如乙二醇、氨基醇)形成普通胶束,其结构是分子的疏水端聚集在     

非水溶剂中囊泡等分子有序组合体的形成

总结了各类表面活性剂在乙醇等非水及混合溶剂中的囊泡、胶束等聚集体的形成规律,着重讨论了非水体系中介电常数改变对正负离子表面活性剂混合体系中聚集体形成的影响.对反胶束等不同分子有序组合体在非水体系中的形成情况也进行了概述.     

电解质水溶液在丙酸十二铵-四氯化碳溶液中的增溶

表面活性剂在非极性溶剂中形成的反胶束在催化反应、光化学、蛋白质苹取分离等方面有着广泛的应用问．这些应用与反胶束的性质有着密切的关系，而增溶水后的反胶束其形状和大小都会发生很大的变化．增溶不同水量的反胶束的微极性、酸碱性、微勤度等已有不少文献报导［2－5］．一些不溶于非极性溶剂而溶于水的物质可以溶解在非极性溶剂中的反胶束核心水团中，这个现象被称为二次增溶．其中，电解质的二次增溶对于研究配体转换反应。酶催化反应问及改变反胶束内部的微环境有着十分重要的作用，Aebi和Weibush回首先研究了有水存在时N。CI在A…     

季铵盐二聚表面活性剂C12-S2-C12·2Br复配体系在氯仿中形成反胶团的增溶水状态

采用近红外光谱技术,研究了季铵盐Gemini表面活性剂C12-S2-C12.2Br/氯仿体系中反胶团的增溶水状态,使用Peakfit解峰技术,将水的近红外光谱分为3个亚带,分别对应分散于溶剂中的水、反胶团中的类似本体水和结合水。将以上3种状态的水换算成每个表面活性剂分子对应的各种状态水分子数,即分散在溶剂中的水ns、类似本体水nf和结合水nb。向C12-S2-C12.2Br/氯仿体系中加入不同头基的离子型表面活性剂十二烷基三甲(乙)基溴化铵(DTAB、DTEB),发现随着添加剂摩尔分数αA的增大,ns和nb增大,nf减小。加入非离子表面活性剂聚乙二醇辛基苯基醚(OP-10),随着αA的增大ns减小,nb增大,nf略有增大趋势。可见加入表面活性剂头基的大小、所带电荷以及亲水性等均会对反胶团的增溶水能力和状态产生影响。     

低温非水环境中疏水缔合聚丙烯酸钠与两性离子表面活性剂的相互作用

疏水缔合聚合物和表面活性剂是构建黏弹性流体的重要物质, 二者的相互作用对流体性质具有显著影响, 一直是该领域的研究热点, 但此前的研究仅聚焦于水溶液中室温及以上温度范围, 而零下极端低温环境中的相互作用尚未涉及. 本文以疏水缔合聚丙烯酸钠(HMPA)为模型聚合物, 研究了低温(-20~20 ℃)环境中其与两性离子表面活性剂N-(顺-二十二碳-13-烯酸酰胺基丙基)-N,N-二甲基羧酸甜菜碱(EDAB)在乙二醇/水混合溶剂中的相互作用及混合体系的流变性质. 先后考察了HMPA溶解于纯水和乙二醇/水混合溶剂时的流变行为和HMPA-EDAB在乙二醇/水混合溶剂中的流变行为及自组装结构形貌. 研究发现, 加入50%(体积分数)的乙二醇会阻碍HMPA疏水支链形成缔合结构, 减弱其增黏性能, 但同时也会大幅降低体系的冰点. 在HMPA- EDAB混合体系中, HMPA疏水支链会进入EDAB胶束内核自组装形成混合胶束. 混合胶束的形貌取决于 HMPA和EDAB的浓度及环境温度, 进而影响体系的流变行为. 零下的低温有助于EDAB形成蠕虫状胶束, 因此HMPA与EDAB表现出更强的协同增效作用.     

Adsorption kinetics of octylphenyl ethers of poly(ethylene glycol)s on the solution—air interface

We studied the dynamic surface tension of aqueous solutions of Triton X-100 and Triton X-405 by the maximum bubble pressure and the inclined plate methods in the lifetime range from 0.001 s up to 10 s. It is established that in the region of large and ultimately small surface pressure and time the adsorption follows diffusion kinetics, but in the region of intermediate values of lifetime and surface pressure both the surfactants decrease the surface tension faster than predicted by the existing diffusion theory. We offer a model that provides for the ability of poly(ethylene glycol) chains to adsorb on the water-air interface and to change the area that a molecule occupies on the surface. For this model we achieve full coincidence of the measured values and the values calculated according to the diffusion theory of the dynamic surface tension.

It is ascertained that the Triton X-405 molecule can exist in the surface layer in different states: with the poly(ethylene glycol) chain fully expanded or with it partially or fully submerged in solution. The first state is most probable at surface pressures less than 5 mN m⁻¹, and the second is probable at a pressure of about 8–10 mN m⁻¹. At pressures larger than 15–20 mN m⁻¹, the poly(ethylene glycol) chain is fully submerged in the solution. The Triton X-100 molecule can also expand its poly(ethylene glycol) chain at low pressures and fully submerges it in the solution at higher values of the surface pressure.     

Wettability of a glass surface in the presence of two nonionic surfactant mixtures

Measurements of the advancing contact angle (theta) were carried out for aqueous solution of p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycol), Triton X-100 (TX100), and Triton X-165 (TX165) mixtures on glass. The obtained results indicate that the wettability of glass depends on the concentration and composition of the surfactant mixture. The relationship between the contact angle and concentration suggests that the lowest wettability corresponds to the concentration of TX100 and TX165 and their mixture near the critical micelle concentration (CMC). The minimum of the dependence between the contact angle and composition of the mixtures for each concentration at a monomer mole fraction of TX100, alpha, equals 0.2 and 0.4 points to synergism in the wettability of the glass surface. In contrast to the results of Zisman ( Zisman, W. A. In Contact Angle, Wettability and Adhesion; Gould, R. F., Ed.; Advances in Chemistry Series 43; American Chemical Society Washington, DC, 1964; p 1 ) there was no linear dependence between cos theta and the surface tension of aqueous solutions of TX100 and TX165 mixtures for all studied systems, but a linear dependence exists between the adhesional tension and surface tension for glass, practically, in the whole concentration range of surfactants studied, the slopes of which are positive in the range of 0.43-0.67. These positive slopes indicate that the interactions between the water molecules and glass surface might be stronger than those between the surface and surfactant molecules. So, the surface excess of surfactant concentration at the glass-water interface is probably negative, and the possibility for surfactant to adsorb at the glass/water film-water interface is higher than that at the glass-water interface. This conclusion is confirmed by the values of the work of adhesion of "pure" surfactants, aqueous solutions of surfactants, and aqueous solutions of their mixtures to the glass surface and by the negative values of glass-water interfacial tension determined from the Young equation in the range of surfactant concentrations corresponding to their unsaturated monolayer at the water-air interface.     

The Micellization and Clouding of Nonionic Surfactant,Poly(Ethylene Glycol) t-Octylphenyl Ether (Triton X-100): Effect of Halide Ions of (Sodium Salt) Electrolytes

In this investigation, the micellization and the clouding phenomena of a nonionic surfactant, poly(ethylene glycol) t-octylphenyl ether (Triton X-100) in the absence and presence of halide ions (sodium salt) electrolytes has been reported. The critical micelle concentration (CMC) of Triton X-100 (in the absence and presence of electrolytes) was measured by surface tension measurements. A decreasing trend of CMC was found with increasing the temperature as well as the concentration of electrolyte. The effectiveness of the halide ions was found in the order: F^? > Cl^? > Br^? > I^?. The surface properties of Triton X-100 were evaluated. The thermodynamic parameters of the micellar systems of Triton X-100 were evaluated and from these thermodynamics data, it was found that in the presence of electrolyte the stability of the micellar system is more. The cloud points (CPs) of Triton X-100 were also measured in the absence and presence of halide ions of electrolytes. With the addition of halide ions of sodium salt (electrolyte), a decrease in CP values was observed and the order was found to be: F^? > Cl^? > Br^? > I^?.     

A new method for the determination of the critical micelle concentration of Triton X-100 in the absence and presence of beta-cyclodextrin by resonance Rayleigh scattering technology

A new method for the determination of the critical micelle concentration (CMC) of Triton X-100 in aqueous solution and beta-cyclodextrin solution by resonance Rayleigh scattering (RRS) has been developed. The method is based on the measurement of the RRS intensity of different concentration of Triton X-100 in aqueous solution and beta-cyclodextrin solution (6.0 x 10(-4) mol l(-1)). When the RRS intensities were plotted against the concentration of Triton X-100, an inflection point appeared at the Triton X-100 concentration of 5.0 x 10(-4) mol l(-1) in aqueous solution and 1.1 x 10(-3) mol l(-1) in beta-cyclodextrin solution, respectively. These values of concentration corresponded to the CMC of Triton X-100 in aqueous solution and beta-cyclodextrin solution, which also agreed closely with the results reported by surface tension and UV-Vis absorption spectrophotometry. Therefore, the present RRS method is very convenient, rapid and accurate and can be used as a new technology for the determination of CMC values of surfactants without any probe. The relationship between the RRS intensity and the concentration, aggregate state and the aggregate molecular size of Triton X-100 has been primarily discussed.     

The Micellization and Clouding Phenomena of a Nonionic Surfactant,Poly(ethylene glycol) t-octylphenyl ether (Triton X-100): Effect of (Chloride Salt) Electrolytes

Herein, we report the micellization and the clouding of a nonionic surfactant, poly(ethylene glycol) t-octylphenyl ether (Triton X-100), in aqueous solutions in the absence and presence of (chloride salt) electrolytes. In the absence and presence of electrolytes, the critical micelle concentration (CMC) of Triton X-100 was measured by surface tension measurements. Upon increasing the temperature as well as the concentration of electrolytes, the CMCs decreased. The surface properties and the thermodynamic parameters of the micellar systems were evaluated. From these evaluated thermodynamic parameters, it was found that in the presence of an electrolyte, the stability of the micellar system is high. The cloud points (CPs) of Triton X-100 were also measured in the absence and presence of metallic ions of electrolytes. Upon the addition of metallic ions of chloride salts (electrolytes), the decrease in CP values was observed and the order was found to be: K⁺ > Na⁺ > Li⁺ > NH⁺₄.     

Determination of the Micellar Properties of Triton X-100 by Voltammetry Method

ABSTRACT

The diffusion coefficient of the micelle, the first CMC and the second CMC of Triton X-100 are determined by cyclic voltammetry without any probe. The first CMC and the second CMC of Triton X-100 are 3.1x lO^?1 and 1.3× 10^?1 respectively. The viscosity of the micelle solution, the micellar aggregation number and the micellar size increase but the diffusion coefficient decreases with Triton X-100 concentration increasing. The mechanism of the electrochemical reaction of Triton X-100 at platinum electrode is deduced by measurements of conductivity, pH and cyclic voltammetry.     

聚醚型表面活性剂在界面上的分子取向Ⅰ. Triton X-100和Triton X-305在水面上的展开膜

研究了25 ℃时Triton X-100和Triton X-305在46.6％NaNO_3水溶液/空气界面上的展开膜。根据表面压、分子面积和分子中乙氧基数目三者之间的关系, 提出了一种界面分子模型。简言之, 分子的烷烃链伸进气相或油相, 分子中间的苯环平躺于界面, 而分子的乙氧基链则以一部分链节平躺于界面、其余的链节伸进水相的方式取向。平躺于界面的乙氧基链节的比例随表面压的增加而减小。这个模型不仅可以合理地解释已知的实验事实, 而且可能适用于包括空气/水和油/水界面上的展开膜和吸附膜。     

Wettability of polymeric solids by ternary mixtures composed of hydrocarbon and fluorocarbon nonionic surfactants

Contact angle (θ) measurements on poly(tetrafluoroethylene) (PTFE) and polymethyl methacrylate (PMMA) surface were carried out for the systems containing ternary mixtures of surfactants composed of: p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycols), Triton X-100 (TX100), Triton X-165 (TX165) and Triton X-114 (TX114), and fluorocarbon surfactants, Zonyl FSN100 (FSN100) and Zonyl FSO100 (FSO100). The aqueous solutions of ternary surfactant mixtures were prepared by adding TX114, FSN100 or FSO100 to binary mixtures of TX100+TX165, where the synergistic effect in the reduction of the surface tension of water (γ(LV)) was determined. From the obtained contact angle values, the relationships between cosθ, the adhesion tension and surface tension of solutions, cosθ and the reciprocal of the surface tension were determined. On the basis of these relationships, the correlation between the critical surface tension of PTFE and PMMA wetting and the surface tension of these polymers as well as the work of adhesion of aqueous solutions of ternary surfactant mixtures to PTFE and PMMA surface were discussed. The critical surface tension of PTFE and PMMA wetting, γ(C), determined from the contact angle measurements of aqueous solutions of surfactants including FSN100 or FSO100 was also discussed in the light of the surface tension changes of PTFE and PMMA under the influence of film formation by fluorocarbon surfactants on the surface of these polymers. The γ(C) values of the studied polymeric solids were found to be different for the mixtures composed of hydrocarbon surfactants in comparison with those of hydrocarbon and fluorocarbon surfactants. In the solutions containing fluorocarbon surfactants, the γ(C) values were different taking into account the contact angle in the range of FSN100 and FSO100 concentration corresponding to their unsaturated monolayer at water-air interface or to that saturated.     

Effect of surface composition on the adsorption of photosystem I onto alkanethiolate self-assembled monolayers on gold

We have used self-assembled monolayers (SAMs) prepared from omega-terminated alkanethiols on gold to generate model surfaces and examine the effect of surface composition on the adsorption of Photosystem I (PSI), stabilized in aqueous solution by Triton X-100. Triton-stabilized PSI adsorbs to high-energy surfaces prepared from HO- and HO2C-terminated alkanethiols but does not adsorb to low-energy surfaces. The inhibition of PSI adsorption at low-energy surfaces is consistent with the presence of a layer of Triton X-100 that adsorbs atop the hydrophobic SAM and presents a protein-resistant poly(ethylene glycol) (PEG) surface. While the presence of the PEG surface prevents the adsorption of PSI, the displacement of the inhibiting layer of Triton X-100 by dodecanol, a more active surfactant, greatly enhances the adsorption of PSI. This inhibiting effect by Triton X-100 can be extended to other protein systems such as bovine serum albumin.     

A Study on the Location and Aggregation of Tetrahydrophenylporphyrin with a Single Hexadecyl Chain in Triton X-100 Micelle

The location and aggregation of 5,10,15-tris(4-hydroxyphenyl)-20-(hexadecyloxyphenyl)porphyrin (P) in nonionic polyoxyethylene (9.5) octylphenol (Triton X-100) micelle solutions were studied by means of UV–Vis and fluorescence spectra. P forms premicelle surfactant–porphyrin aggregates when the surfactant concentration is below and approaching the CMC. In Triton X-100 micelle solutions, different types of H-aggregates of P were formed when the concentration of P is higher than 3.9×10^-6?mol?dm^-3. As the bulk pH is changed, a transfer process for the porphyrin moiety in Triton X-100 micelle occurs. In neutral Triton X-100 micelle solutions, P may be located at the inner layer of the micelle; in basic conditions, the porphyrin moiety may transfer to the outer surface of the micelle. The kinetic study of porphyrin complexed with Cu(II) in Triton X-100 micelle solutions shows that the metalation rate could be controlled by changing the pH.