等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

双核钴卟啉/DMF体系的吸氧热力学研究

关于单核金属卟啉体系的吸氧热力学已有广泛的研究．七十年代末至八十年代初，报导了一类面对面双时批双核钴的双氧配合物，根据ESR谱，认为存在Co-O-Co的超氧桥式结构．关于Co：02＝1：1的双核钴双卟啉配合物的吸氧热力学，迄今未见报导．本工作用电子光谱法研究了一种由十个碳原子的脂肪二酰胺链连接两个四苯基卟啉的双核钴（Ⅱ）配合物在DMF溶液中与双氧的可逆结合作用，测定了吸氧热力学数据，用ESR谱法研究了钻离子与双氧的结合方式．1实验部分五·五样品和试剂双核钴（11）双环叶琳，CO。diTPP（diAMCs）的合成见文献间，其…     

色氨酸-镝(Ⅲ)配合物与鲱鱼精DNA的作用方式

采用UV光谱法、荧光光谱法,在pH=7.40的缓冲溶液中确定了镝(Ⅲ)与色氨酸的结合比n_Dy(Ⅲ)∶n_Trp=1∶3,Dy(Ⅲ)(Trp)₃配合物与鲱鱼精DNA的结合比n_{Dy(Ⅲ)(Trp)3}∶n_DNA=2∶1。用双倒数法确定了结合常数K_25℃=5.75×10⁴ L·mol^-1和K_37℃=3.27×10⁴ L·mol^-1。化学热力学研究显示配合物Dy(Ⅲ)(Trp)₃与hsDNA的结合为熵和焓共同驱动。结合Scatchard法和粘度法,确定了配合物Dy(Ⅲ)(Trp)₃与hsDNA之间主要为静电作用和嵌插作用。     

微量量热法研究肌动蛋白的聚合及顺铂的影响

肌动蛋白（actin）是细胞微丝系统的结构蛋白·单体G一肌动蛋白与聚合产物F一肌动蛋白间的相互转变与细胞的运动、形态和信息传递相关＊．实际上，微丝系统处在一个动态平衡状态．即G和F不断相互转换以适应细胞功能要求．在外源性物质影响下，这个动态平衡可能被影响而产生相应的药理、毒理作用．罗世荣等问报导在荧光显微镜下观察到，顺铂（抗癌药）及其类似物会诱导微丝的重组和解聚．但机理有待研究·目前虽然有许多方法被用来研究肌动蛋白的聚合过程问，但对聚合全过程的确切描述尚无充分的实验数据，对聚合热动力学过程的研究至今尚…     

合成环氧乙烷新途径的从头算研究

在MP4/6-31G*//RHF/6-31G*理论水平上，对单态甲撑插入甲醛中碳氧双链生成环氧乙烷的反应(CH2_(~1A)＋CH_2O→C_2H_4O)进行了从头算研究。发现其反应历程由两步组成：1) 反应物沿反应坐标接近，体系能量单调下降，生成平而松散环状的分子复合物(MC)；2) 分子复合物沿反应坐标经由一过渡态(TS)重排为产物环氧乙烷，此步的势垒只有36.99 kJ·mol~(-1)。进而计算了该反应的热力学函数和动力学性质，并进行了讨论。当设法将甲醛引入产生活性中间体CH_2(~1A)的体系中，该反应有可能成为在室温下制备环氧乙烷的非催化途径。     

苯在NaHY沸石上的吸附热及红外光谱研究

本文用气相色谱法在250-300 ℃的范围内, 测定了苯在不同Na:H比的NaHY的初始吸附热. 结果发现 ,随着Na含量的减少, 苯在NaHY上的吸附热作阶梯式的下降, 即由NaY上的62.4 kJ·mol~(-1)经过60.3 kJ.mol~(-1)降至HY上的54.6 kJ mol~(-1). 红外光谱的研究结果表明, 苯在NaY上吸附产生的1848和1984 cm~(-1)一对吸收带,在HY上吸附产生的1832和1975cm~(-1)一对吸收带,可以分别表征苯和NaHY中的Na~+以及H~+的作用. 根据上述结果讨论了苯在NaHY上吸附位的性质、吸附作用的强弱以及Na~+离子的定位状况。     

OH+C2H2与OH+C2H4加成反应的热力学和动力学

OH基与乙炔(乙烯)的反应是控制大气中OH基浓度的重要化学反应。对反应OH+C_2H_2,1975年Davis等用FP-RF技术测定了反应的速率常数。1977年,Perry又用同样方法对该反应作出了研究;结果表明,此反应的速率常数强烈地依赖于压力,与Davis等人的实验结果不符。对反应OH+C_2H_4,Atkinson等人的实验研究表明,压力在30.0kPa以下,反应的速率常数随压力而改变;而在30.0—88.4 kPa之间,与压力无关.这与前人的结果不同。两个反应的产物也因温度不同而异.此外,上述反应一般是在近101kPa下发生的,而实验结果大多是在低压下获得的。且目前尚无直接的理论计算结果。为此,我们在从头算水平上用统计热力学方法,对反应     

金属离子对齐多夫定与牛血清白蛋白结合作用的影响

用荧光光谱法和紫外分光光度法研究了水溶液(Tris-HCl缓冲溶液, pH 7.1)中齐多夫定(ZDV)与牛血清白蛋白(BSA)的结合作用及三种金属离子(Cu2+, Mg2+, Zn2+)对其的影响. 结果表明: 齐多夫定及金属离子均导致BSA的内源荧光猝灭, 猝灭机制均为静态猝灭; 齐多夫定与BSA间存在较强结合作用, 热力学参数△H和△S分别为-10.2 kJ·mol-1和77.5 J·mol-1·K-1 (298 K), 表明其结合力以静电作用力为主; 298 K下结合常数、结合位点数和结合距离分别为6.92×105 L·mol-1、1.18和2.28 nm; 温度升高结合常数和结合位点数减小. 三种金属离子均导致ZDV与BSA的结合常数减小, 结合距离增大.     

双卟啉双钴配合物与双氧作用的热力学及ESR研究

用电子光谱法研究了一种由六个碳原子的脂肪二酰胺链连接两个四苯基卟啉的双核钴(Ⅱ)配合物(Co~2PP~4)在DMF溶液中与双氧的可逆结合作用,测定了反应的Hill系数n=1.84,△G^0(298K)=-12.3kJ·mol^-^1,P~1~/~2=6.8kPa,热力学数据表明Co~2PP~4分子内两个金属卟啉环之间存在着强的协同作用。由双卟啉双钴(Ⅱ)配合物与双氧作用形成的配合物经ESR证实为超氧金属配合物,结合方式属于Co-O~2^-超氧类型。     

气液色谱法研究Ni[(C8H17)O)2PS2]2与脂肪胺加合反应的热力学性质

The equilibium constants of acid-base interaction between Mi(Octyl_dtp)_2 and alkylamine were determined by GLC method at several temperatures. Thermodynamic parameters △H and △S were evaluted as follows:ethylamine: △H=-11.5kJ mol~(-1) △S=-22.7J K~(-1) mol~(-1)diethylamine: △H=-18.1kJ mol~(-1) △S=-42.1J K~(-1) mol~(-1)The variations of logK versus temperature fit following equations:ethylamine: lgK=-1.19+598.9/Tdiethylamine: lgK=-2.20+945.6/T     

配合物[CdCl(HL)(dpp)(H_2O)]_n.nH_2O的合成、晶体结构与荧光性能研究

Under hydrothermal condition, the reaction of 3-hydroxy-1-adamantaneacetic acid (H_2L) with CdCl_2 and 1,3-di-4-pyridylpropane (dpp) has afforded a new Cd(Ⅱ) compound, [CdCl(HL)(dpp)(H_2O)]_n·nH_2O (1), which was structurally characterized by single-crystal X-ray diffraction analysis. The crystal is triclinic, space group P1 with α= 1.091 0(1) nm, b=1.131 8(1) nm, c=1.246 4(1) nm, α=88.52(1)°,β=71.34(1)°, γ=68.11(1)°, V=1.345 2(1) nm~3, Z=2, M_r=591.40, F(000)=608, D_c= 1.460 g·cm~(-3), μ=0.947 mm~(-1), the final R=0.040 1 and wR=0.104 0 for 4 950 observed reflections (I>2σ(I)). Complex 1 consists of one-dimensional chains deriving from CdCl(HL)(H_2O) units linked by dpp ligands, and lattice water molecules decorate between the chains. The O-H……O and O-H……Cl hydrogen bonds lead to the formation of a 2D layer structure.