Size and surface effects of prussian blue nanoparticles protected by organic polymers

Prussian blue (PB) nanoparticles protected by organic polymers such as poly(vinylpyrrolidone) (PVP) and poly(diallyldimethylammonium chloride) (PDDA) were prepared. Different experimental conditions (concentrations of Fe ions and feed ratios of Fe to the polymers) have been investigated to control the size of the PB nanoparticles. For example, the averaged dimensions of the PB nanoparticles were tuned from 12 to 27 nm by use of PVP in the different conditions. Addition of PDDA produced the PB nanoparticles with very small dimensions (5-8 nm) by an effective electrostatic interaction. We found that the surface environments of the PB nanoparticles affect the inherent properties of PB. The shifts of charge transfer (CT) absorptions from Fe(2+) to Fe(3+) in the PB nanoparticles resulted from the surface-protecting polymers. Especially, the PB nanoparticles with the PVP protection show high solubility in a variety of organic solvents and a solvent-dependent CT absorption. Measurement of the magnetic properties of the PB nanoparticles showed unprecedented size-dependency, surface effect, and superparamagnetic properties.     

Immobilization of Prussian blue nanoparticles onto thiol SAM modified Au electrodes for analysis of DL-homocysteine

Prussian blue (PB) nanoparticles were immobilized onto gold electrodes using L-cysteine, 1,3-propanedithiol, and 1,8-octanedithiol as a bridge between the gold surface and the PB nanoparticles by the self-assembly method. The obtained PB/thiol/Au electrodes exhibit direct and indirect electrocatalytic activity toward DL-homocysteine (HCys) oxidation. It is possible for these PB nanoparticles modified electrodes to be used for the determination of HCys. The text was submitted by the authors in English.     

Compact microcubic structures platform based on self-assembly Prussian blue nanoparticles with highly tuneable conductivity

Control of molecular and supramolecular properties is used to obtain a new advanced hybrid material based on Prussian blue nanoparticles (PB NPs). This hybrid material is obtained through a self-assembled Layer-by-Layer (LbL) approach combining the advantageous features of β-cyclodextrin (β-CD) polysaccharides, PB NPs and poly(allylamine hydrochloride) from electrostatic interaction between the deposited layers. Transmission electronic microscopy images suggested that PB NPs were protected by β-CD polysaccharides that prevent the aggregation phenomena. In addition, as confirmed by scanning electronic microscopy images, it was found that PB NPs are organized in microcubic supramolecular like structures via a mesoscale self-assembly process. Interestingly, the 3-bilayer {PAH/PB-CD} film exhibited a higher density of microcubic structures and a high electrochemical response with PB sites available for redox reactions at a supramolecular level. By utilizing fewer bilayers and consequently less material deposition, the formed {PAH/PB-CD} multilayer films of a tuneable conductivity can be expected to have interesting future applications for host-guest like dependent electrochemical biosensing designs.     

Preparation of Three‐Dimensional Ordered Macroporous Prussian Blue Film Electrode for Glucose Biosensor Application

Ordered 3D interconnected macroporous Prussian blue (PB) films were electrochemically fabricated by using colloidal crystals of polystyrene beads as sacrificial templates. The prepared PB film electrodes have excellent catalytic activity towards the reduction of hydrogen peroxide. The PB structure was further used as functional interface for fabricating an enzyme‐based glucose sensor by using surface modification technique based on the electrostatic interactions. The resulted sensor has higher functional density, and larger surface area. The interconnected macroporous structure allows enhanced mass transport. These characteristics of the sensor enable us to detect glucose with high sensitivity. Therefore, the present 3D ordered macroporous film sensor exhibits wide linear detection range towards glucose, acceptable reproducibility and operational and storage stability. The present approach is promising for the generation of high‐enzyme‐content thin films with tailored bioactivity.     

Enhanced charge transport and incorporation of redox mediators in layer-by-layer films containing PAMAM-encapsulated gold nanoparticles

In this work, we exploit the molecular engineering capability of the layer-by-layer (LbL) method to immobilize layers of gold nanoparticles on indium tin oxide (ITO) substrates, which exhibit enhanced charge transfer and may incorporate mediating redox substances. Polyamidoamine (PAMAM generation 4) dendrimers were used as template/stabilizers for Au nanoparticle growth, with PAMAM-Au nanoparticles serving as cationic polyelectrolytes to produce LbL films with poly(vinylsulfonic acid) (PVS). The cyclic voltammetry (CV) of ITO-PVS/PAMAM-Au electrodes in sulfuric acid presented a redox pair attributed to Au surface oxide formation. The maximum kinetics adsorption is first-order, 95% of the current being achieved after only 5 min of adsorption. Electron hopping can be considered as the charge transport mechanism between the PVS/PAMAM-Au layers within the LbL films. This charge transport was faster than that for nonmodified electrodes, shown by employing hexacyanoferrate(III) as the surface reaction marker. Because the enhanced charge transport may be exploited in biosensors requiring redox mediators, we demonstrate the formation of Prussian blue (PB) around the Au nanoparticles as a proof of principle. PAMAM-Au@PB could be easily prepared by electrodeposition, following the ITO-PVS/ PAMAM-Au LbL film preparation procedure. Furthermore, the coverage of Au nanoparticles by PB may be controlled by monitoring the oxidation current.     

The electroactive multilayer films of polyelectrolytes and Prussian blue nanoparticles and their application for H2O2 sensors

Prussian blue (PB) nanoparticles were immobilized in polyelectrolyte (PE) multilayers of various compositions and thickness. Films containing nanoparticles and poly(allylamine hydrochloride) (PAH) were formed using the layer-by-layer adsorption method. A layer of branched poly(ethyleneimine) (PEI) was used to anchor the multilayer structure at the surface of a gold electrode. The films exhibited electroactive properties, increasing with the number of deposited PB layers. The properties of PEI/(PB/PAH) _n multilayers were then compared with the ones containing additionally the conductive polymer poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) (PEDOT:PSS). We found that the addition of the conductive, water-soluble polymer enhances the electroactive properties of the multilayer films. It also increased sensitivity of the multilayer-covered electrodes for electrochemical detection of hydrogen peroxide.     

Monte Carlo-based linear Poisson-Boltzmann approach makes accurate salt-dependent solvation free energy predictions possible

The prediction of salt-mediated electrostatic effects with high accuracy is highly desirable since many biological processes where biomolecules such as peptides and proteins are key players can be modulated by adjusting the salt concentration of the cellular milieu. With this goal in mind, we present a novel implicit-solvent based linear Poisson-Boltzmann (PB) solver that provides very accurate nonspecific salt-dependent electrostatic properties of biomolecular systems. To solve the linear PB equation by the Monte Carlo method, we use information from the simulation of random walks in the physical space. Due to inherent properties of the statistical simulation method, we are able to account for subtle geometric features in the biomolecular model, treat continuity and outer boundary conditions and interior point charges exactly, and compute electrostatic properties at different salt concentrations in a single PB calculation. These features of the Monte Carlo-based linear PB formulation make it possible to predict the salt-dependent electrostatic properties of biomolecules with very high accuracy. To illustrate the efficiency of our approach, we compute the salt-dependent electrostatic solvation free energies of arginine-rich RNA-binding peptides and compare these Monte Carlo-based PB predictions with computational results obtained using the more mature deterministic numerical methods.     

Layer-by-layer deposition of a polythiophene/Au nanoparticles multilayer with effective electrochemical properties

Multilayers consisting of a water soluble polythiophene derivative and Au nanoparticles have been deposited onto different electrode substrates by means of layer-by-layer deposition technique. The assembly of the films has been performed by taking advantage of the electrostatic interactions between the positively charged imidazolic moiety of the polythiophene chain and the negative charges of citrate ions surrounding Au nanoparticles, as well of the affinity of S to Au. The nanoparticles result stably grafted to the organic matrix. The resulting modified electrodes have been characterised through electrochemical, spectroelectrochemical and microscopic techniques. The results evidenced that a high number of individual nanoparticles is present inside the multilayer. The presence of nanoparticles is of chief importance for most effective charge percolation through the multilayer, as suggested by the responses to electroactive probe species in solution. The electrocatalytic performances of the modified electrodes have been tested with respect to the oxidation of ascorbic acid.     

Physicochemical Characteristics of Polypyrrole/(Glucose oxidase)/(Prussian Blue)‐based Biosensor Modified with Ni‐ and Co‐Hexacyanoferrates

In this work, three types of electrodes suitable for amperometric glucose biosensors were designed. One type of electrode was based on bio‐selective layer of polypyrrole/(glucose oxidase)/(Prussian Blue) (Ppy/GOx/PB) and it was used as a control electrode regarding to which electrochemical properties of two other types of electrodes were compared. During the formation of Prussian blue layers graphite electrodes were additionally modified by Ni‐hexacyanoferrate (NiHCF) and by Co‐hexacyanoferrate (CoHCF) in order to design Ppy/GOx/PB‐NiHCF and Ppy/GOx/PB‐CoHCF electrodes, respectively. Some physicochemical characteristics of all three types of electrodes were evaluated and compared. The Ppy/GOx/PB‐NiHCF electrode showed wider linear range of the calibration curve than Ppy/GOx/PB and Ppy/GOx/PB‐CoHCF electrodes. The effect of temperature on analytical performance of the Ppy/GOx/PB‐NiHCF based biosensor has been evaluated and activation energy of enzyme catalysed reaction has been calculated within the temperature range of 15 °C to 30 °C.     

3-Glycidoxypropyltrimethoxysilane mediated in situ synthesis of noble metal nanoparticles: application to hydrogen peroxide sensing

The in situ synthesis is reported of noble metal nanoparticles via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated metal salts during sol-gel processing. The method described involves the synthesis of uniform spherical nanoparticles of gold, silver and palladium with controlled size that can be directly utilized for thin film preparation. A detailed study of the synthesis and application of gold nanoparticles to the electrochemical detection of hydrogen peroxide was carried out and reveals that the amplification of hydrogen peroxide sensing is size-dependent. In addition, these nanoparticles exhibit excellent compatibility towards composite preparation. As an example, a nanocomposite with Prussian Blue (PB) is synthesized and found to be useful for the fabrication of chemically modified electrodes (CME). The resulting CME shows dramatic improvement in the electrochemistry of PB with gradual enhancement in electrocatalytic efficiency towards hydrogen peroxide sensing. The nanocomposite is used to study the direct and horseradish peroxidase (HRP)-catalyzed reduction of hydrogen peroxide. The results recorded for hydrogen peroxide analysis show an improvement in sensitivity and limit of detection on decreasing the size of gold nanoparticles in all cases.     

Layer-by-layer deposition of a polythiophene/Au nanoparticles multilayer with effective electrochemical properties

Multilayers consisting of a water soluble polythiophene derivative and Au nanoparticles have been deposited onto different electrode substrates by means of layer-by-layer deposition technique. The assembly of the films has been performed by taking advantage of the electrostatic interactions between the positively charged imidazolic moiety of the polythiophene chain and the negative charges of citrate ions surrounding Au nanoparticles, as well of the affinity of S to Au. The nanoparticles result stably grafted to the organic matrix. The resulting modified electrodes have been characterised through electrochemical, spectroelectrochemical and microscopic techniques. The results evidenced that a high number of individual nanoparticles is present inside the multilayer. The presence of nanoparticles is of chief importance for most effective charge percolation through the multilayer, as suggested by the responses to electroactive probe species in solution. The electrocatalytic performances of the modified electrodes have been tested with respect to the oxidation of ascorbic acid.

     

Effect of Various Deposition Techniques,Electrode Materials and Posttreatment with Tetrabutylammonium and Tetrabutylphosphonium Salts on the Electrochemical Behavior and Stability of Various Prussian Blue Modified Electrodes

The effect of various deposition techniques, electrode materials and posttreatment with tetrabutylammonium and tetrabutylphosphonium salts on the electrochemical behavior and stability of various Prussian blue (PB) modified electrodes, namely PB modified glassy carbon electrodes, silicate‐film supported PB modified glassy carbon electrodes, PB‐doped silicate glassy carbon electrodes, PB modified carbon ceramic electrodes using electrochemical deposition and PB modified carbon ceramic electrodes using chemical deposition is reported. Cyclic voltammetry and amperometric measurements of hydrogen peroxide were performed in a flow injection system while the carrier phosphate buffer (pH 7.0) with a flow rate of 0.8 mL min^?1 was propelled into the electrochemical flow through cell housing the PB modified working electrode as well as an Ag|AgCl|0.1 M KCl reference and a Pt auxiliary electrode. The results showed that the deposition procedure, electrode material and posttreatment with additional chemicals can significantly alter the stability and electrochemical behavior of the PB film. Among the studied PB modified electrodes, those based on carbon ceramic electrodes modified with a film of electropolymerized PB showed the best electrochemical stability.     

Prussian blue nanoparticles protected by poly(vinylpyrrolidone)

Prussian blue (PB) nanoparticles protected by poly(vinylpyrrolidone) (PVP) were prepared by mixing aqueous Fe2+, Fe(CN)63-, and PVP solutions together and were characterized by UV-vis, IR, XRPD, and TEM. Averaged dimensions of the nanoparticles were controlled between 12 and 27 nm depending on initial Fe ion concentrations and feed ratios of Fe ion to PVP. Solubility of PB bulk in organic solvents is considerably low; nevertheless, formations of the PB nanoparticles dramatically increase the solubility in a variety of organic solvents. It is noteworthy that the PVP-protected PB nanoparticles stably maintain the cluster formations without further aggregations and dissociation in CHCl3 over 1 month. Measurement of the critical temperature (Tc) where PB nanoparticles exhibit a ferromagnetic property showed a gradual decrease of Tc for the nanoparticles as the particle sizes become smaller. This result could be ascribed to the reduction of the averaged numbers of magnetic interacted neighbors.     

Study on an immunosensor based on gold nanoparticles and a nano-calcium carbonate/Prussian blue modified glassy carbon electrode

An amperometric carcinoembryonic antigen (CEA) immunosensor was fabricated based on Prussian blue (PB), nano-calcium carbonate (nano-CaCO₃) and nano-gold modified glassy carbon electrode. First, PB as a mediator was deposited on glassy carbon electrode to obtain a negatively charged surface. Then, positive nano-CaCO₃ was adsorbed on the PB modified electrode through electrostatic interaction. Subsequently, gold nanoparticles were deposited on the nano-CaCO₃/PB modified electrode. The use of two kinds of nanomaterials (nano-CaCO₃ and nano-gold) with good biocompatibility as immobilization matrixes not only provides a biocompatible surface for protein loading but also avoids the leaking of PB. The size of nano-CaCO₃ was characterized by transmission electron microscopy (TEM). The factors influencing the performance of the immunosensor presented were studied in detail. Under the optimized conditions, cyclic voltammograms (CV) determination of CEA showed a specific response in two concentration ranges from 0.3 to 20 ng mL^?1 and from 20 to 100 ng mL^?1 with a detection limit of 0.1 ng mL^?1 at a signal-to-noise ratio of 3. The immunosensor presented exhibited high selectivity, sensitivity and good stability.     

碳纳米管/ZnO纳米复合体的制备和表征

通过将不同直径的ZnO纳米颗粒与碳纳米管连接制备了碳纳米管/ZnO纳米复合体. 将团聚的ZnO纳米颗粒分散并用表面活性剂CTAB使纳米颗粒带正电. 化学氧化碳纳米管使其带负电. ZnO/CTAB微团通过碳管表面羧基与CTAB的静电作用与碳纳米管连接形成纳米复合体. 研究了复合体形成的不同实验条件, 表征了碳纳米管/ZnO纳米复合体的结构并研究了纳米复合体的光学特性. 研究表明, 与碳纳米管连接的ZnO纳米颗粒是互不连接的并保持量子点的特性. 光致发光研究表明ZnO纳米颗粒的激发在纳米复合体中有淬灭.     

Control and modeling of the dielectrophoretic assembly of on-chip nanoparticle wires

Suspensions of metallic nanoparticles in water were assembled via the action of an alternating electric field (dielectrophoresis) into wires of micrometer thickness. Two modes of microwire assembly, one through the bulk of the suspension and one as half-cylinders on the glass surface between the electrodes, were identified. The operating conditions responsible for the two assembly modes were recognized. The control of the process parameters allows making, for example, straight single connectors or massively parallel arrays of microwires on the surface of the chip, which can be extracted in dry form. The microwire assembly process was modeled using finite element electrostatic calculations. The direction of growth can be guided by introducing conductive islands or particles in the suspension. The experiments, supported by electrostatic calculations, show that the wires grow in the direction of highest field intensity, "automatically" making electrical connections to the objects between the electrodes. The results point the way to controlled dielectrophoretic assembly of nanoparticles into on-chip electrical connectors, switches, and networks.     

Development of biosensors based on hexacyanoferrates

Ferric and copper hexacyanoferrates (PB and CuHCF, respectively) were electrodeposited on glassy carbon electrodes providing a suitable catalytic surface for the amperometric detection of hydrogen peroxide. Additionally glucose oxidase was immobilized on top of these electrodes to form glucose biosensors. The biosensors were made by casting glucose oxidase-Nafion layers onto the surface of the modified electrodes. The operational stability of the films and the biosensors were evaluated by injecting a standard solution (5 muM H(2)O(2) for PB, 5 mM H(2)O(2) for CuHCF and 2.5 mM glucose for both) over 5-10 h in a flow-injection system with the electrodes polarized at -50 (PB) and -200 mV (CuHCF) versus Ag/AgCl, respectively. The glucose biosensors demonstrated suitability for glucose determination: 0.0-2.5 mM (R(2)=0.9977) for PB and 0.0-10 mM (R(2)=0.9927) for CuHCF, respectively. The visualization of the redox catalyst modifiers (PB and CuHCF films) was presented by scanning electron micrographs.     

Thermostable biocatalytic films of enzymes and polylysine on electrodes and nanoparticles in microemulsions

Microemulsions of oil, water and surfactant were evaluated as media for biocatalysis at high temperatures employing films of polylysine (PLL) and the enzymes horseradish peroxidase (HRP), soybean peroxidase (SBP) and the protein myoglobin (Mb). PLL was covalently linked to oxidized pyrolytic graphite electrodes or carboxylated 500 nm diameter silica nanoparticles, then cross-linked by amidization to HRP, SBP and Mb. The resulting film systems were stable at 90 degrees C for >12 h in microemulsions. Characterization of the microemulsions by conductivity, viscosity and probe diffusion coefficients suggested that these media have bicontinuous microstructures from 25 to 90 degrees C. UV circular dichroism and visible spectroscopy confirmed that the enzymes retained near-native conformation in the films at temperatures as high as 90 degrees C. Oxidation of o-methoxyphenol to 3,3'-dimethoxy-4,4'-biphenoquinone by enzyme-PLL films on silica nanoparticles gave yields 3-5-fold larger in microemulsions at 90 degrees C compared to the same reaction at 25 degrees C. The best yields were in CTAB microemulsions and were 3-fold larger than in buffers at 90 degrees C.     

Electrocatalytic hydrogen redox chemistry on gold nanoparticles

Electrocatalytic proton reduction leading to the formation of adsorbed molecular hydrogen on gold nanoparticles of 1-3 and 14-16 nm diameter stabilized by 1-mercapto-undecane-11-tetra(ethyleneglycol) has been demonstrated by cyclic voltammetry using a hanging mercury drop electrode. The nanoparticles were adsorbed to the electrode from aqueous dispersion and formed robust surface layers transferrable to fresh base electrolyte solutions. Unique electrocatalytic proton redox chemistry was observed that has no comparable counterpart in the electrochemistry of bulk gold electrodes. Depending on size, the nanoparticles have a discrete number of electrocatalytically active sites for the two-electron/two-proton reduction process. The adsorbed hydrogen formed is oxidized with the reverse potential sweep. These findings represent a new example of qualitative different behavior of nanoparticles in comparison with the corresponding bulk material.     

Preparation, characterization, and electrocatalytic activity of surface anchored, Prussian Blue containing starburst PAMAM dendrimers on gold electrodes

Gold bead electrodes were modified with submonolayers of 3-mercaptopropionic acid or 2-aminoethanethiol and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0 and 3.5, respectively) to obtain films on which Prussian Blue (PB) was later absorbed to afford mixed and stable electrocatalytic layers. Experiments carried out with these novel materials not only showed an improved surface coverage of PB on the dendrimer modified electrodes as compared to PB modified gold electrodes prepared under acidic conditions, but also showed an increased stability at neutral pH values for one of the dendrimer containing substrates where the PB film on a bare gold electrode is simply not formed. The dendrimer modified electrodes were also tested as electrocatalytic substrates for the electroxidation of L(+)-ascorbic acid (AA), and it was found that their sensitivity as well as the corresponding detection limits were improved as compared to the voltammetric response of a Au-PB modified electrode. On the basis of UV-visible (UV-vis) spectroscopy and electrochemical experiments, it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers.