Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Kinetic studies of grafting of maleic anhydride to hydrocarbon substrates

The kinetics of grafting of maleic anhydride to various hydrocarbon substrates has been investigated. Grafting to eicosane and squalane was effected in the pure hydrocarbons and in 1,2-dichlorobenzene solution, while polyethylene was grafted only in solution. The initiator was 2,5-dimethyl-2,5-di(t-butylperoxy)-3-hexyne which has a half life of about 1 h at a typical reaction temperature of 150°C. At high concentrations of initiator (Ca. 0.02M), the rate of disappearance of maleic anhydride is linear with time. In the pure hydrocarbons the order with respect to initiator is close to 0.5. In squalane, the overall activation energy is 112 kJ mol^?1; the average number of maleic anhydride molecules grafted per molecule of peroxide decomposed varies from 8 at high rates of initiation to 57 at low rates of initiation. The results are interpreted in terms of a chain mechanism, including a slow propagation step in which a succinic anhydride radical abstracts hydrogen from the same or a different chain. The same general mechanism is proposed for grafting of maleic anhydride to polyethylene and the hydrocarbons in 1,2-dichlorobenzene solution.     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Donor-Acceptor Complexes in Copolymerization. XXXVI. Alternating Diene-Dienophile Copolymers. 4. Copolymerization of Furan and 2-Methylfuran with Maleic Anhydride

Abstract

The copolymerization of furan and 2-methylfuran with maleic anhydride in the presence of a radical catalyst yields equimolar, alternating copolymers in which the furan units have a 2,5-linkage (NMR and IR). The copolymerization appears to have a floor temperature of about 40°C. The furan-maleic anhydride Diels-Alder adduct polymerizes in solution in the presence of a radical catalyst at temperatures above 60°C to yield the identical copolymer as is obtained from the monomers. The adduct undergoes a retrograde reaction above 60°C to regenerate the monomers which then copolymerize through excitation of the ground state comonomer charge transfer complex.     

1H NMR assignment of oligomeric grafts of maleic anhydride‐grafted polyolefin

The ¹ H NMR assignment of oligomeric grafts of maleic anhydride (MA)‐grafted polyolefin (PO), MA‐g‐PO hereafter, was experimentally demonstrated for the first time using NMR spectroscopy. ¹³ C DEPT, ¹ H‐¹ H DQF‐COSY, and ¹ H T₂‐edited spectroscopy of MA‐g‐PO proved that peaks of the intermediate methine protons of succinic anhydride oligomeric grafts, which are nearly tetrameric, are observed at 2.5–3.5 ppm and show broadening. Copyright © 2012 John Wiley & Sons, Ltd.     

Electron-impact studies XCII–Negative ion-molecule reactions in anhydride systems. Perfluoroacetic anhydride with succinic,maleic and phthalic anhydrides. An ion cyclotron resonance study

The trifluoroacetate anion undergoes reaction with succinic, maleic and phthalic anhydrides to yield 1 : 1 adducts. The molecular anions of maleic and phthalic anhydride also undergo reaction with perfluoroacetic anhydride to produce [CF₃CO₂]^?· Maleic anhydride parent ions produce [M + CF₃CO·]^? ions when allowed to react with perfluoroacetic anhydride.     

Dual monomer grafting of styrene and maleic anhydride onto model hydrocarbon substrates

Styrene and maleic anhydride (MAn) were successfully grafted, alone and simultaneously, onto various model hydrocarbon substrates at 180 °C with 2,5‐dimethyl‐2,5‐di‐(t‐butyl peroxy)hexane (L101) as a free‐radical initiator. Dodecane, 1‐dodecene, and 2,6,10,14‐tetramethylpentadecane were selected as model compounds to investigate the effects of terminal unsaturation and branching on grafting and crosslinking. These compounds were chosen to mimic the aforementioned microstructural characteristics that are commonly observed in polyethylene. The results demonstrate that terminal unsaturation increases the amount of crosslinked material in the presence of L101. With respect to grafting, for the single monomer systems, MAn prefers to graft as single saturated units, whereas styrene prefers to graft as long chains of polystyrene oligomers. However, when both monomers are grafted simultaneously, graft yields are drastically reduced because of a propensity for the two monomers to form a styrene–maleic anhydride copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2456–2468, 2000     

Donor–acceptor complexes in copolymerization. LVIII. Alternating diene–dienophile copolymers. 12. Structure of furan–maleic anhydride copolymers prepared from the monomers and the diels-Alder adduct

The copolymerization of furan with maleic anhydride in the presence of a perester or azobisiso-butyronitrile at 50 or 70°C yields an unsaturated equimolar, alternating copolymer in which the furan units have 3,4 unsaturation and 2,5 linkages. The furan–maleic anhydride Diels-Alder adduct undergoes retrograde dissociation in solution at 70°C and, in the presence of radical catalysts, yields the same unsaturated alternating copolymer as is obtained from the monomers. The adduct undergoes homopolymerization in the presence of a rapidly decomposing perester at 50°C to yield a saturated polymer having a rearranged structure containing 3-oxabicyclo[2.2.1]heptane-5,6-dicarboxylic anhydride repeating units with 2,7 linkages.     

Curing reaction of unsaturated (epoxy) polyesters based on different aliphatic glycols

The influence of the structure of succinic or glutaric anhydride modified linear unsaturated (epoxy) polyesters on the course of the cure reaction with styrene initiated by benzoyl peroxide (BPO) or the mixture of benzoyl peroxide/tetrahydrophthalic anhydride (BPO/THPA) or benzoyl peroxide/maleic anhydride, as well as viscoelastic properties and thermal behavior of their styrene copolymers have been studied by DSC, DMA, and TGA analyses. Additionally, mechanical properties: flexural properties using three-point bending test and Brinell’s hardness for studied copolymers were evaluated. It was confirmed that the structure of used polyesters had a considerable influence on the course of the cure reaction with styrene, viscoelastic, thermal, and mechanical properties of prepared styrene copolymers. Generally, one or two asymmetrical peaks for the cure reaction of succinic or glutaric anhydride modified linear unsaturated epoxy polyesters with styrene were observed. They were connected with various cure reaction, e.g., copolymerization of carbon–carbon double bonds of polyester with styrene, thermal curing of epoxy groups, polyaddition reaction of epoxy to anhydride groups in dependence of used curing system. In addition, only one asymmetrical, exothermic peak attributed to the copolymerization process of succinic or glutaric anhydride modified linear unsaturated polyesters with styrene was visible. Moreover, the obtained styrene copolymers based on succinic or glutaric anhydride modified linear unsaturated epoxy polyesters were characterized by higher values of E_{20 ^°\textC}^￠ E_{{20\,^{\circ}{\text{C}}}}^{\prime} , T _g, E″, ν _e, E _mod, F _max, hardness, IDT, FDT but lower ε − F _max compared to those values observed for styrene copolymers prepared in the presence of succinic or glutaric anhydride modified linear unsaturated polyesters. This supported to the production of stiffer and more thermally stable polymeric structure of copolymers based on unsaturated epoxy polyesters. Moreover, the copolymers prepared in the use of glutaric anhydride modified linear unsaturated (epoxy) polyesters were described by lower values of E_{20 ^°\textC}^￠ E_{{20\,^{\circ}{\text{C}}}}^{\prime} , T _g, E″, ν _e, E _mod, F _max, hardness, IDT, FDT but higher ε − F _max than those based on succinic anhydride modified linear unsaturated (epoxy) polyesters. The presence of longer aliphatic chain length in polyester’s structure leads to produce more flexible network structure of styrene copolymers based on glutaric anhydride modified linear unsaturated (epoxy) polyesters than those based on succinic anhydride modified linear unsaturated (epoxy) polyesters.     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Peroxide-initiated grafting of maleimides onto hydrocarbon substrates

The grafting of N-phenethyl-maleimide (1) onto squalane and eicosane was investigated. As reference substances for spectroscopical investigations homopolymer, N-phenethyl-succinimide (2), t-butyl-(4) and cyclohexyl-N-phenethyl-succinimide (6) were synthesized. The grafting reactions were carried out at 150 °C in 1,2-dichlorobenzene with Luperox 130 as initiator (molar ratio hydrocarbon substrate:1:initiator = 10:1:0.2). Two fractions of graft products were isolated and analysed by ¹H NMR, ¹³C NMR, FTIR and UV spectroscopy, SEC and MALDI-TOF MS to determine the average number of grafted residues per substrate molecule and to elucidate the structure of the grafts and the grafting sites. Overall grafting yields were found to be >90%. Only a small percentage of the total amount of substrate was grafted (2-3%). First fraction of both oligomers (approx. 25 wt%) showed to be a mixture of homopolymers (average degree of polymerization 6) and graft products (approx. 1:3), the latter containing mainly long-chain grafts with an average chain length of 7. The major fraction of graft products contained predominantly single units. As an average number of units per substrate molecule very similar results were obtained for eicosane and squalane (n = ∼ 3). In the case of squalane single units were found to be linked mainly to tertiary carbon atoms, long chain grafts mainly to secondary C-atoms. Apart from the homopolymers resulting from radical transfer, homopolymers terminated with methyl groups resulting from secondary radicals formed by the decomposition of Luperox were also observed. Homopolymers as well as graft products were found to contain small amounts of maleimide groups. The results suggest that as in the mechanism proposed for maleic anhydride, both inter- and intramolecular hydrogen abstraction occurs as part of the chain process. Termination proceeds mainly by hydrogen transfer and also by disproportionation, to a lesser extent. The formation of long chain grafts on tertiary carbons seems to be sterically hindered.     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Functionalization of polyesters with maleic anhydride by reactive extrusion

Maleic anhydride (MAn) was grafted onto aliphatic and aromatic/aliphatic copolyesters by reactive extrusion in the presence of a free radical initiator using a twin‐screw extruder. The grafting reaction was confirmed by spectroscopic analyses. The presence of succinic anhydride groups was shown by FT‐IR spectroscopy, and NMR spectra indicate that the grafts consist of single succinic anhydride units. The 2D ¹H‐NMR spectra (COSY) indicate that grafting reactions take place at aliphatic dicarboxylic acid units of copolyesters. The graft content was determined by a nonaqueous titration method. The effects of concentration of initiator and monomer and reaction temperature on the graft content and intrinsic viscosity were studied. The low percentage grafting in poly(lactic acid) was observed due to the presence of limited free radical sites in the polymer backbone. Temperature and monomer and initiator concentrations affect the graft content, and the desired graft content with minimal degradation can be obtained by controlling these factors. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1693–1702, 1999     

Characterization of chloroprene and maleic anhydride copolymer by 13C-NMR spectroscopy and pyrolysis GC/MS

The radical copolymerizations of chloroprene (CP) and maleic anhydride (MAH) were carried out with AIBN in 1,4-dioxane at 60°C. The monomer reactivity ratios were estimated as r₁ (CP) = 0.38 and r₂ (MAH) = 0.07. Microstructures in the copolymer of chloroprene (CP) and maleic anhydride (MAH) were investigated by 75.4 MHz ¹³C-and 300 MHz ¹H-NMR spectroscopies. Resonances were assigned to the monomer sequence dyads CC, CM, and MC (C = chloroprene, M = maleic anhydride). Well resolved fine structure in the ¹³C-NMR spectra showed that 1,2- and 3,4-structural chloroprene units were negligible in the copolymer. The pyrolysis characterization of the copolymer was also investigated by the pyrolysis gas chromatography mass spectrometry (GC/MS). The fragments of CP and MAH monomers and CP-MAH hybrid dimer, CO, and CO₂ were identified after pyrolysis of the copolymer. © 1994 John Wiley & Sons, Inc.     

Study of the synthesis of poly(isobutylene-b-amide-11) by polycondensation of α,ω-dianhydride oligoisobutylene with α,ω-diamino oligoamide-11. I. Study of amine–anhydride and amide–anhydride reactions on low molecular weight models and on oligomers and polymers

The side reactions connected with the polycondensation of α,ω-diamino oligoamides and α,ω-dianhydride oligoisobutylenes are studied on low and high molecular weight models. Models for amine and anhydride end groups are dodecylamine and (2-dodecene-1-yl) succinic anhydride, respectively; their reaction is studied in the bulk (170°C) and in solution (142, 152, and 162°C); the products are analyzed by ¹H-, ¹³C-, and ¹H-¹³C-NMR and GPC. Some of these products and the junctions between the blocks are prepared independently. Models of amide groups in the chain are N-dodecyldodecanamide and N-dodecyloctadecanamide; their reaction with anhydride model results in cleavages with formation of imide groups. The results obtained from low molecular weight models are confirmed by studies on oligomers. They show unambiguous by that crosslinking which accompanies the block polycondensation originates from the reaction of amino-end groups with the intermediary acid groups resulting from the amine-anhydride reaction.     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999     

Effect of the initial maleic anhydride content on the grafting of maleic anhydride onto isotactic polypropylene

A series of ¹³C‐enriched maleic anhydride grafted isotactic polypropylene samples were prepared in solution at 170 °C by changes in the initial maleic anhydride content. The NMR spectra of the samples showed that the signals of the maleic anhydride attached to the tertiary carbons of the isotactic polypropylene chains increased considerably with increasing maleic anhydride content, whereas the signals of the maleic anhydride on the radical chain ends (with a single bond) arising from β scission did not. On the other hand, the signals of the maleic anhydride on the radical chain ends with double bonds increased markedly with increasing maleic anhydride content, and this suggested that β scission could occur extensively after maleic anhydride was attached to the tertiary carbons. As a result, the molecular weight of the grafted polypropylene decreased significantly with increasing maleic anhydride content in this study. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5529–5534, 2005     

Peroxide-initiated grafting of maleic anhydride onto linear and branched hydrocarbons

The structural features of the grafting of maleic anhydride onto low-molecular-weight compounds have been elucidated using several spectroscopic and analytical techniques. Conclusive evidence for the occurrence of singly grafted anhydride residues in multiply grafted products has been established using 2,3-¹³C₂ labeled maleic anhydride. In homogeneous solution, at the low concentrations of maleic anhydride employed, there is little evidence for oligomeric or polymeric grafts to dodecane, pristane, or squalane. The results suggest that isothermal grafting of maleic anhydride to hydrocarbon polymers should also lead to a predominance of single grafts. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3817–3825, 1999     

Synthesis and modification of new biodegradable copolymers: Serine/glycolic acid based copolymers

Serine/glycolic acid-based biodegradable polymers have been prepared by ring-opening homopolymerization of 3-(O-benzyl)-L -serinylmorpholine-2,5-dione, and ring-opening copolymerization of the morpholine-2,5-dione derivative and L -lactide/ϵ-caprolactone. The homopolymerization was carried out in the melt at 165°C for 3 min using stannous octanoate as the initiator and continued at lower reaction temperatures (130–150°C) for 48 h, using a molar ratio of monomer and initiator of 1000 yielded a polymer of M_n = 4000. The polymer prepared by homopolymerization of the morpholine-2,5-dione derivative was composed of alternating protected serine and glycolic acid residues. Random copolymers of serine and glycolic acid and L -lactic acid/ϵ-caprolactone were synthesized by copolymerization reaction of 3-(O-benzyl)-L -serinylmorpholine-2,5-dione and lactide or ϵ-caprolactone in the melt at 165°C for 3 min and further reaction at 130°C using stannous octanoate as an initiator. The polymers were deprotected and functionalized through the side chain hydroxyl group of serine residues with an acrylate moiety for applications in injectable drug delivery, cell encapsulation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1901–1907, 1997