ESR and NMR study of the γ-ray-induced postpolymerization of vinyl monomers adsorbed on zeolite

The γ-ray-induced postpolymerization of acrylonitrile and methyl methacrylate adsorbed on Linde zeolite 13X irradiated at 77°K has been studied between 303 and 343°K as a function of the amount of adsorbed monomer and of the irradiation dose. The change in the nature and the concentration of free radical with temperature and duration of the postpolymerization was followed by the ESR method, whereas the formation of polymer was monitored continuously by the decay of the ¹H-NMR absorption line of the monomer under high-resolution conditions. It was found that the overall postpolymerization kinetics may be accounted for by assuming an exponential decay of radical propagation and recombination reactions with chain length. The tacticity of the polymer recovered by destroying the matrix in hydrofluoric acid was determined by ¹³C-NMR. The probability of isotactic addition of AN and MMA is larger than in the radical polymerization in solution owing likely to the association of adsorbed monomer molecules in pairs preforming an isotactic diad.     

Immobilized copper catalyst for atom transfer radical addition and polymerization

A novel multidentate amine grafted on silica gel and magnetic microsphere was prepared. Its chemical structure was confirmed by C¹³ NMR, XPS and FTIR, and the nitrogen content was determined by elemental analysis. It was also used as a ligand for CuCl and successfully catalyzed the atom transfer radical addition of both carbon tetrachloride (CCl₄) to methyl methacrylate and methyl trichloroacetate to styrene, repeatedly. The conversion and purity of the product were determined through gas chromatography and ¹H NMR, respectively. The immobilized copper catalyst complex was also used in atom transfer radical polymerization of styrene initiated by 1,1,1,3‐tetrachloro‐3‐phenylpropane and methyl methacrylate initiated by methyl 2‐methyl‐2,4,4,4‐tetrachlorobutyrate, respectively. Although the polymerization took place successfully, it did not proceed in a controlled fashion. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of telechelics and block copolymers via “living” radical polymerization

Hydroxy‐telechelic poly(methyl methacrylate)s of molecular weights below 5000 were obtained by atom transfer radical polymerization (ATRP) of methyl methacrylate followed by end‐capping with allyl alcohol via atom transfer radical addition (ATRA). As initiators for the ATRP, monofunctional initiators with an additional hydroxy group in the molecule or bifunctional initiators were employed. The successful synthesis of the hydroxy‐telechelic PMMA was proved by determination of their molecular weight using MALDI‐TOF‐MS. The efficiency of the end‐capping reaction was determined by ¹H NMR spectroscopy using the allyl N‐(4‐tolyl)carbamate as end‐capping agent. Block copolymers comprising a poly(ethylene oxide) (PEO) block and a poly(methyl methacrylate) (PMMA) block were prepared by ATRP using a macroinitiator on the PEO basis. The dormant species of the macroinitiator consists of the phenyl chloroacetate moiety which shows a high rate of initiation. The successful synthesis of the poly(ethylene oxide)‐block‐poly(methyl methacrylate) was proved by ¹H NMR spectroscopy; the ratios of EO/MMA repeating units in the feed and the copolymer were nearly equal.     

Reaction of bromoform and iodoform with acrylic monomers initiated by Fe(CO)5+DMF

Conclusions The Fe(CO)₅ + DMF system, in contrast to peroxide initiation, permits us to carry out the addition of bromoform with selective cleavage of the C-Br bond to readily polymerizing acrylonitrile, methyl acrylate, and methyl methacrylate. Iodoform was shown to be significantly more active than bromoform in these reactions, which permits carrying out the radical addition and telomerization of iodoform in bromoform at lower temperature than without solvent.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1904–1906, August, 1987.     

Polymerization of coordinated monomers. V. Polymerization of methyl methacrylate–Lewis acid complexes

The polymerization of the complex of methyl methacrylate with stannic chloride, aluminum trichloride, or boron trifluoride was carried out in toluene solution at several temperatures in the range of 60° to ?78°C by initiation of α,α′-azobisisobutyronicrile or by irradiation with ultraviolet rays. The tacticities of the resulting polymers were determined by NMR spectroscopy. Both the 1:1 and the 2:1 methyl methacrylate–SnCl₄ complexes gave polymers with similar tacticities at the polymerization temperatures above ?60°C. With decreasing temperature below ?60°C, the isotacticity was more favored for the 2:1 complex, whereas the tacticities did not change for the 1:1 complex. On the ESR spectroscopy of the polymerization solution under the irradiation of ultraviolet rays at ?120°C, the 1:1 SnCl₄ complex gave a quintet, while the 2:1 SnCl₄ complex gave both a quintet and a sextet. The sextet became weaker with increasing temperature and disappeared at ?60°C. This behavior of the sextet corresponds to the change of the tacticities of polymer for the 2:1 SnCl₄ complex. An intra–intercomplex addition was suggested for the polymerization of the 2:1 complex, which took a cis-configuration on the basis of its infrared spectra. The sextet can be ascribed to the radical formed by the intracomplex addition reaction, while the quintet can correspond to that formed by the intercomplex addition reaction. The proportion of the intracomplex reaction was estimated to be about 0.25 at ?75°C, and the calculated value of the probability of isotactic diad addition of the intracomplex reaction was found to be almost unity.     

Radical telomerization of 3,3,3-trifluoropropene with diethyl hydrogen phosphonate: Characterization of the first telomeric adducts and assessment of the transfer constants

The radical telomerization of 3,3,3-trifluoropropene (TFP) with diethyl phosphate (or diethyl hydrogen phosphonate, DEHP) was investigated to synthesize fluorinated telomers bearing a phosphonate end-group, as H(TFP)_nP(O)(OEt)₂. Di-tert-butyl peroxide was the most efficient radical initiator. A careful structural study of typical TFP/DEHP telomers was performed by ¹H, ¹⁹F, and ³¹P nuclear magnetic resonance spectroscopies. These analytical methods allowed us to prove the selective addition of the phosphonyl radical onto the hydrogenated side of TFP, while the telomers containing more than two TFP units were composed of TFP isomers containing normal and reversed adducts. The kinetics of telomerization led to the assessment of the first four order transfer constants giving an infinite transfer constant of 0.75 at 140 °C for DEHP.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Initiation of polymerization of methyl methacrylate by oxalic acid and iron(III) mixtures

The polymerization of methyl methacrylate either by free radical or charge transfer mechanism has been studied in dimethyl sulphoxide at 60° in the presence of oxalic acid and hexakis dimethylsulphoxide iron(III) perchlorate, [Fe(DMSO)₆](ClO₄)₃. Increased rate was noticed for 1:1 mole ratio of oxalic acid to Fe³⁺ for charge transfer polymerization; a well defined induction period was found for free radical polymerization in the same systems. Mechanisms for the two types of reaction are proposed. The rate constant for the interaction of poly(methyl methacrylate) radical with the iron-oxalate complex was found to be 1.52 × 10⁵ l. mol^?1 sec^?1 at 60°.     

Introduction of 2-methoxycarbonylallyl end group by copolymerization of methyl α-(phenoxymethyl)acrylate accompanying with addition-fragmentation reaction

Copolymerizations of methyl α-(phenoxymethyl)acrylate (MPMA) with methyl acrylate, methyl methacrylate, styrene, and methyl α-ethylacrylate were carried out. Addition of a polymer radical to MPMA followed by the subsequent fragmentation of poly(MPMA) radical resulted in the 2-methoxycarbonylallyl end group and phenoxy radical in the course of the copolymerization. The extent of the fragmentation determined by ¹H-NMR spectroscopy depends on reactivity of the MPMA radical toward the reference monomers. An increase in the addition rate of the MPMA radical to the reference monomer brought about suppression of the fragmentation. The addition of the MPMA radical to styrene seems to be sufficiently fast to prevent the fragmentation. Since the rate of the fragmentation relative to the propagation was considerably accelerated by raising the temperature to 110°C, MPMA can be used as a novel chain transfer agent to control molecular weight and end group at a temperature above 100°C. © 1993 John Wiley & Sons, Inc.     

The temperature dependence of individual transfer constants in the telomerization of methyl methacrylate with bromotrichloromethane

The photoinitiated reactions between methyl methacrylate and bromotrichloromethane have been studied in the temperature range 30–90°; analysis of the telomer products by gel permeation chromatography was used to determine individual transfer constants for species of varying size. Arrhenius plots have been used to find the difference between the energies of activation of the transfer and propagation steps; these show no significant variation with radical size. However the ratio of the pre-exponential factors for transfer and for propagation increases appreciably over the first three steps of the telomerization and is the important factor in determining the magnitude of the individual transfer constants. These results can be explained in terms of association via cyclic structures of the radical-end with other groups in the growing telomer.     

Nouvelle méthode de détermination des taux de réativité des copolymères par résonance magnétique nucléaire: Application aux poly(méthacrylate de méthyle–chlorure de vinylidène)

Constant-composition copolymers of methyl methacrylate and vinylidene chloride produced by radical copolymerization are studied by ¹H-NMR at 60 and 250 MHz. The different methods of the literature for the derivation of reactivity ratios from either the copolymer composition or the sequence average lengths, or even the diad distribution, are applied but lead to rather dispersed results. A new graphical method is proposed, based on the use of peculiar values of the triad distribution functions. It allows us to detect a penultimate effect for the vinylidene chloride-rich region. In the same range, a change in tacticity of the diads and triads on the methylmethacrylate sequences, as compared with homopolymers, is observed; it suggests that the anomaly is caused by the competition of the depropagation reaction.     

Preparation and characterization of graft terpolymers with controlled molecular structure

Segmented terpolymers, poly(alkyl methacrylate)‐g‐poly(D ‐lactide)/poly(dimethylsiloxane) (PLA/PDMS), were prepared with a combination of the “grafting through” technique (macromonomer method) and controlled/living radical polymerization (atom transfer radical polymerization or reversible addition–fragmentation transfer polymerization). Two synthetic pathways were used. The first was a single‐step approach in which a low‐molecular‐weight methacrylate monomer (methyl methacrylate or butyl methacrylate) was copolymerized with a PLA macromonomer and a PDMS macromonomer. The second strategy was a two‐step approach in which a graft copolymer containing one macromonomer was chain‐extended by a copolymerization of the second macromonomer and the low‐molecular‐weight methacrylate. The kinetics of both synthetic approaches were investigated, showing that the polymerizations exhibited a controlled/living behavior. Furthermore, the molecular structure of the terpolymers (composition, molecular weight distribution, and microstructure) was investigated by two‐dimensional liquid chromatography. Well‐defined terpolymers with controlled branch distribution, composition (F_w,PMMA/F_w,PLA/F_w,PDMS ～ 50/30/20) molecular weight (M_n ～ 50,000 g · mol^?1), and a narrow molecular weight distribution (M_w/M_n ～ 1.3) were prepared via both pathways. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1939–1952, 2004     

Syntheses of cardanol-based cationic surfactants and their use in emulsion polymerisation

Six quaternary ammonium salts were designed and synthesised with moderate to high yields in three steps, based on cardanol, a low-cost and abundant renewable resource. The new ammonium salts can act as reactive surfactants due to their having both a hydrophilic ammonium group and a hydrophobic unsaturated alkyl chain. The gemini surfactants with a linker of a linear saturated aliphatic hydrocarbon chain exhibited a relatively low CMC value (≤ 0.2 mmol L^?1) and surface tension (≤ 27 mN m^?1), signifying that this kind of amphiphile exhibited good surface active properties. The photo-active gemini surfactant with critical micelle concentration (CMC) of 0.05 mmol L^?1 was used successfully as the sole emulsifier in the emulsion polymerisation of methyl methacrylate (MMA). In addition, a benzyl bromide-containing surfactant can act as both an atom transfer radical polymerisation (ATRP) initiator and an emulsifier in an activator generated by the electron transfer atom transfer radical polymerisation (AGET ATRP) of MMA in emulsion. The value of the number-average molecular mass of the resulting cardanol-end poly(methyl methacrylate) (PMMA) is M_n,GPC = 45.1 kDa, with polydispersity of 1.39.     

Copper‐mediated radical polymerization on a microcellular monolith surface

High‐capacity microcellular monoliths were prepared by a two‐step process, including the synthesis of a bromoester‐functionalized scaffold by the copolymerization of a highly concentrated emulsion and an in situ surface polymerization of methyl methacrylate with atom transfer radical polymerization. The influence of various parameters, such as the feed ratio, the concentration of immobilized bromoester groups, and the presence of a spacer group on the poly(methyl methacrylate) loading, was studied. Monoliths with capacities of up to 7 mmol g^?1 were obtained. Thermogravimetric analyses, scanning electron microscopy experiments, and mercury intrusion porosimetry measurements were used for the characterization of the final materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1216–1226, 2004     

Improving the Structural Control of Graft Copolymers. Copolymerization of Poly(dimethylsiloxane) Macromonomer with Methyl Methacrylate Using RAFT Polymerization

Reversible addition‐fragmentation chain transfer was applied to the copolymerization of methyl methacrylate and a methacrylate‐terminated poly‐(dimethylsiloxane) macromonomer (PDMS‐MA). The relative reactivity of PDMS‐MA (1/r_MMA) was higher than in the conventional radical copolymerization and similar to that in the atom transfer radical copolymerization. The obtained graft copolymers had much lower polydispersities than those obtained in the conventional radical systems.     

原子转移自由基聚合及可控自由基聚合

以作者在原子转移自由基聚合领域的研究成果为主导,结合国内外文献,对近年来出现的颇具影响的可控自由基聚合体系与进行了评述与展望。     

Poly(methyl methacrylate)‐block‐poly(N‐vinyl pyrrolidone) diblock copolymer: A facile synthesis via sequential radical polymerization mediated by isopropylxanthic disulfide and its nanostructuring polybenzoxazine thermosets

In this contribution, we reported a facile synthesis of poly(methyl methacrylate)‐block‐poly(N‐vinyl pyrrolidone) (PMMA‐b‐PVPy) diblock copolymers via sequential radical polymerizations mediated by isopropylxanthic disulfide (DIP). It was found that the radical polymerization of N‐vinyl pyrrolidone (NVP) mediated by DIP was in a controlled and living manner. In contrast, the polymerization of methyl methacrylate mediated by DIP displayed the behavior of telomerization, affording xanthate‐terminated PMMA with a good control of molecular weights while the conversion of monomer was not very high. The xanthate‐terminated PMMA can be successfully used as the macromolecular chain transfer agent for the polymerization of NVP via RAFT/MADIX process and thus PMMA‐b‐PVPy diblock copolymers can be successfully synthesized via sequential radical polymerization mediated by isopropylxanthic disulfide. One of these diblock copolymers was incorporated into polybenzoxazine and the nanostructured thermosets were obtained as evidenced by transmission electron microscopy, small angle X‐ray scattering, and dynamic mechanical thermal analysis. The formation of nanostructures in polybenzoxazine thermosets was ascribed to a reaction‐induced microphase separation mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 952–962     

Electrochemically mediated atom transfer radical polymerization with dithiocarbamates as alkyl pseudohalides

Electrochemically mediated atom transfer radical polymerizations (ATRPs) provide well‐defined polymers with designed dispersity as well as under external temporal and spatial control. In this study, 1‐cyano‐1‐methylethyl diethyldithiocarbamate, typically used as chain‐transfer agent (CTA) in reversible addition–fragmentation chain transfer (RAFT) polymerization, was electrochemically activated by the ATRP catalyst Cu^I/2,2′‐bipyridine (bpy) to control the polymerization of methyl methacrylate. Mechanistic study showed that this polymerization was mainly controlled by the ATRP equilibrium. The effect of applied potential, catalyst counterion, catalyst concentration, and targeted degree of polymerization were investigated. The chain‐end functionality was preserved as demonstrated by chain extension of poly(methyl methacrylate) with n‐butyl methacrylate and styrene. This electrochemical ATRP procedure confirms that RAFT CTAs can be activated by an electrochemical stimulus. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 376–381     

Atom transfer radical polymerization of methyl methacrylate using copper-based homogeneous and heterogeneous catalysts

This study aimed at polymerization of methyl methacrylate with novel catalysts in the atom transfer radical polymerization (ATRP) condition at 90 °C. This was accomplished using CuBr/N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (CuBr–AEAPTMS) as a homogeneous catalyst and one time with CuBr@AEAPTMS/SBA-15 as a heterogeneous catalyst. Catalysts were characterized using TGA, FT-IR, and UV–Vis spectroscopy. The structural analysis of the polymer was carried out by ¹³C NMR spectroscopy and GPC. Three characteristic parts of polymer produced by ATRP method including the initiator, monomer units, and end group was shown in ¹³C NMR spectra. In addition, the presence of C–Br unit showed that the polymerization process is alive. The ¹H NMR analysis was used for kinetic investigation of methyl methacrylate polymerization with homogeneous and heterogeneous catalysts that showed high monomer conversion (98 and 90% after 35 min, respectively) and good control of molecular weight with a dispersity (Р= 1.5–1.7). In addition, the plot of ln ([monomer]₀/[monomer] _t ) versus time gave linear relationships indicating a constant concentration of the propagating species throughout the polymerization. Finally, the results of the polymerization using heterogeneous catalyst compared with homogeneous catalyst revealed that it was according to ATRP method.     

Facile one‐pot/one‐step technique for preparation of side‐chain functionalized polymers: Combination of SET‐RAFT polymerization of azide vinyl monomer and click chemistry

An azido‐containing functional monomer, 11‐azido‐undecanoyl methacrylate, was successfully polymerized via ambient temperature single electron transfer initiation and propagation through the reversible addition–fragmentation chain transfer (SET‐RAFT) method. The polymerization behavior possessed the characteristics of “living”/controlled radical polymerization. The kinetic plot was first order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n ≤ 1.22). The complete retention of azido group of the resulting polymer was confirmed by ¹H NMR and FTIR analysis. Retention of chain functionality was confirmed by chain extension with methyl methacrylate to yield a diblock copolymer. Furthermore, the side‐chain functionalized polymer could be prepared by one‐pot/one‐step technique, which is combination of SET‐RAFT and “click chemistry” methods. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012