Stereoregulation in the polymerization of methyl α-ethylacrylate by n-BuLi in toluene

The polymerization of methyl α-ethylacrylate was carried out in toluene by n-BuLi at various temperatures. The yield of the polymer decreased with increase in the polymerization temperature and at 30°C and above no polymer was obtained, indicating that the ceiling temperature of this monomer lay between 0 and 30°C. The isotacticity increased with an increase in the polymerization temperature and at 0°C a highly isotactic polymer was obtained. The fractionation of the polymer obtained at ?78°C showed that the polymer was a mixture of isotactic and syndiotactic ones. Upon the addition of a small amount of methanol or water in the polymerization mixture the isotacticity of the polymer increased while the yield decreased. Syndiotactic polymer was obtained in the polymerization by n-BuLi in tetrahydrofuran as well as by diisobutyl aluminum diphenylamide in toluene.     

Thermal polymerization of N-tert-butylacrylamide in 1,4-dioxane

The kinetics of the thermal polymerization of N-tert-butylacrylamide were investigated in 1,4-dioxane as solvent, in the 65–80°C temperature range. It was found that the overall rate of polymerization which was determined by a gravimetric method is proportional to the 1.9 power of monomer concentration at 70°C. The rate of initiation was determined by ESR spectroscopy using DPPH as an inhibitor, and it was found that the order of initiation rate is 1.8 with respect to monomer concentration at 70°C. The overall activation energy for the thermal polymerization of N-tert-butylacrylamide was found to be 64 ± 9 kJ mol^?1 in the 65–80°C temperature range. The activation energy for the rate of initiation was also determined and it was found to be 90 ± 23 kJ mol^-1.     

Polymerization of Methyl Methacrylate in the Presence of Imidazole Derivatives. Kinetics and Polymer Structure

The kinetics of the polymerization of methyl methacrylate (MMA) in the presence of imidazole (Im), 2-methylimidazole (2MIm), or benz-imidazole (BIm) in tetrahydrofuran (THF) at 15–40°C was investigated by dilatometry. The rate of polymerization, R_p , was expressed by R_p = k[Im] [MMA]², where k = 3.0 × 10^?6 L²/(mol² s) in THF at 30°C. The overall activation energy, E_a , was 6.9 kcal/mol for the Im system and 7.3 kcal/mol for the 2MIm system. The relation between logR_p and 1 T was not linear for the BIm system. The polymers obtained were soluble in acetone, chloroform, benzene, and THF. The melting points of the polymers were in the range of 258–280°C. The ¹H-NMR spectra indicated that the polymers were made up of about 58–72% of syndiotactic structure. The polymerization mechanism is discussed on the basis of these results.     

Molecular weight distribution studies. I. Radiation-induced polymerization of liquid α-methylstyrene

The concentration of water in purified and BaO-dried α-methylstyrene was found to be 1.1 × 10^?4M. The radiation-induced bulk polymerization of the α-methylstyrene thus prepared was studied in the temperature range of ?20°C to 35°C. The polymerization rate varied as the 0.55 power of the dose rate. The theoretical molecular weights and molecular weight distribution were calculated from a proposed kinetic scheme and these values were then compared with those found experimentally. The agreement between these two was reasonably close, and therefore it was concluded that, from the molecular weight distribution point of view, the proposed kinetic scheme for the cationic polymerization of α-methylstyrene is an acceptable one. The rate constant for chain transfer to monomer k_f changed with temperature and was found to be responsible for the decrease in the molecular weight of the polymer with increase in temperature. k_f and k_p at 20°C were found to be 0.95 × 10⁴ l./mole-sec and 0.99 × 10⁶ l./mole-sec, respectively.     

Radical polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate,a dimer of methyl acrylate,as a polymerizable α-substituted acrylate

Polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate (MMEA), which is known as a dimer of methyl acrylate, were studied in relation to steric hindrance-assisted polymerization. The propagating polymer radical from MMEA was detected as a five-line spectrum and quantified by ESR spectroscopy during the bulk polymerization at 40–80°C. The absolute rate constants of propagation and termination (κ_p and κ_t) for MMEA at 60°C (κ_p = 19 L/mol s and κ_t = 5.1 × 10⁵ L/mol s) were evaluated using the concentration of the propagating radical at the steady state. The balance of the propagation and termination rates allows polymer formation from MMEA. The polymerization rate of MMEA at 60°C was less than that of MMA by a factor of about 4 at a constant monomer concentration. Although no influence of ceiling temperature was observed at a temperature ranging from 40 to 70°C, addition-fragmentation in competition with propagation reduced the molecular weight of the polymer. The content of the unsaturated end group was estimated to be 0.1% at 60°C to the total amount of the monomer units consisting of the main chain. MMEA exhibited reactivities almost similar to those of MMA toward polymer radicals. It is concluded that MMEA is one of the polymerizable acrylates bearing a substituted alkyl group as an α-substituent. Characterization of poly(MMEA) was also carried out. © 1996 John Wiley & Sons, Inc.     

Effect of temperature and solvent on polymer tacticity in the free‐radical polymerization of styrene and methyl methacrylate

The effect of temperature and solvent on polymer tacticity in free‐radical polymerization of styrene and methyl methacrylate was studied by ¹³C and ¹H NMR, respectively. Polystyrene shows a mild syndiotactic tendency (P_m = 0.36 ± 0.02) that is independent of temperature over a wide range (?10 to 120 °C), while poly(methyl methacrylate) shows a stronger syndiotactic tendency (P_m = 0.17 ± 0.01 at 30 °C) that decreases as temperature is increased (P_m = 0.22 ± 0.02 at 80 °C). None of the polymerization solvents studied (bulk, THF, DMF, DMSO, acetonitrile, and acetone) had a significant effect on polymer tacticity in either system. The triad fractions of both polymers showed deviations from the Bernoulli model, implying that the antepenultimate unit affects the propagation reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3351–3358     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

Biosynthesis of Glucosyl Glycerol,a Compatible Solute,Using Intermolecular Transglycosylation Activity of Amylosucrase from Methylobacillus flagellatus KT

A putative α-amylase gene (accession number, CP000284) of Methylobacillus flagellatus KT ATCC51484 was cloned in Escherichia coli, and its gene product was expressed and characterized. The purified recombinant enzyme (MFAS) displayed a typical amylosucrase (ASase) activity by the demonstration of multiple activities of hydrolysis, isomerization, and polymerization although it was designated as an α-amylase. The optimal reaction temperature and pH for the sucrose hydrolysis activity of MFAS were determined to be 45 °C and pH 8.5, respectively. MFAS has relatively high thermostable characteristics compared with other ASases, as demonstrated by a half-life of 19.3 min at 50 °C. MFAS also showed polymerization activity using sucrose as a sole substrate. Glycerol was transglycosylated by the intermolecular transglycosylation activity of MFAS. Two major products were observed by thin-layer chromatography and isolated by paper chromatography and recycling HPLC. Using ¹H and ¹³C NMR, their chemical structures were determined to be (2S)-1-O-α-d-glucosyl-glycerol or (2R)-1-O-α-d-glucosyl-glycerol and 2-O-α-d-glucosyl-glycerol, in which a glucose molecule is linked to glycerol via an α-glycosidic linkage.     

Stereoregularity of radically polymerized poly(alkyl acrylates) and poly(trimethylsilyl acrylates) and the preparation of syndiotactic poly(methyl acrylate)

Nuclear magnetic resonance (NMR) spectroscopy was used to determine the stereoregularity of radically polymerized poly(ethyl acrylates), poly(trimethylsilyl acrylates), and poly(isopropyl acrylate-α,β-d₂). The ethyl acrylate polymers consisted of a random configuration having about 50% of isotactic diads, and their stereoregularities were independent of the polymerization temperature (40 to ?78°C). Poly(trimethylsilyl acrylates) and poly(isopropyl acrylate-α,β-d₂) prepared at low temperatures had a syndiotactic configuration. Syndiotactic poly(methyl acrylate) was derived from syndiotactic poly(trimethylsilyl acrylate). For poly(methyl acrylate), an approximate estimation of the stereoregularity by infrared spectroscopy was proposed.     

Initial steps of thermal degradation of PVC prepared at various temperatures

PVC samples were obtained by bulk polymerization initiated with AIBN and ultraviolet irradiation at 40, 25, 0, ?30, and ?50°C. They were characterized by ¹³C NMR measurements, infrared spectroscopy, GPC in hexamethylphosphoramide and B.E.T. surface area measurements. Their thermal degradation was studied between 110 and 185°C by using continuous titration of HCl evolved through a conductimetric cell. The ultraviolet spectra were recorded at various steps of the degradation. At high degradation temperatures, the more syndiotactic the polymer, the longer the polyene average sequences are. The amount of HCl evolved is minimum for a polymerization temperature of 0 or 25°C, depending on the degradation temperature and on the morphology of the polymer. The results are discussed in terms of chemical factors (tacticity distribution, molecular weight) as well as of physical factors (morphology, interval viscosity).     

The influence of temperature and photoinitiator concentration on photoinitiated polymerization of diacrylate monomer

The behavior of p-methoxybenzoyldiphenylphosphine oxide, previously synthesized, as a photoinitiator for the polymerization of diacrylate monomer, in the presence of 3% (w/w) tertiary amine (triethyl amine) as synergist additive, was studied. The influence of temperature in the range 30–90°C at 3% (w/w) photoinitiator concentration and the influence of the photoinitiator concentration in the range 0.5–3.5% (w/w) at 30°C was investigated by differential scanning photocalorimetry (photo-DSC). In all experiments the photopolymerization was performed at constant light intensity (3 mW cm⁻²). The maximum conversion was obtained at temperature of 90°C at 3% (w/w) photoinitiator concentration and 3% (w/w) triethyl amine. The optimal concentration of photoinitiator to obtain maximum conversion was 3% (w/w), at 30°C. No thermal polymerization occurred at higher temperature.     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

Preparation of poly-p-benzenesulfonamide

The poly-p-benzenesulfonamide (PBS) structure has been prepared by the transamidation of N¹,N¹-dimethylsufanilamide hydrochloride in a melt reaction at 180°C. The polymeric nature of the product is exhibited by brittle film formation and a glass transition temperature of 180–190°C. Infrared and NMR spectroscopy are consistent with the proposed structure. The number-average degree of polymerization was measured by NMR. The maximum degree of polymerization was 14. Failure to obtain an optimum molecular weight did not appear to be due to monomer purity. Increasing the reaction temperature from 180 to 220°C led to side reactions giving insoluble and infusible product. PBS underwent thermal decomposition near 310°C. The decomposition temperature is independent of molecular weight.     

Thermally induced polymerization of isobutylene in the presence of SnCl4: Kinetic study of the polymerization and NMR structural investigation of low molecular weight products

The polymerization reactivity of isobutylene/SnCl₄ mixtures in the absence of polar solvent, was investigated in a temperature interval from −78 to 60 °C. The mixture is nonreactive below −20 °C but slow polymerization proceeds from −20 to 20 °C with the initial rate r₀ of the order 10⁻⁵ mol · l⁻¹ · s⁻¹. The rate of the process increases with increasing temperature up to ∼10⁻² mol · l⁻¹ · s⁻¹ at 60 °C. Logarithmic plots of r₀ and M̄_n versus 1/T exhibit a break in the range from 20 to 35 °C. Activation energy is positive with values E = 21.7 ± 4.2 kJ/mol in the temperature interval from −20 to 35 °C and E = 159.5 ± 4.2 kJ/mol in the interval from 35 to 60 °C. The values of activation enthalpy difference of molecular weights in these temperature intervals are ΔH_Mn = −12.7 ± 4.2 kJ/mol and −38.3 ± 4.2 kJ/mol, respectively. The polymerization proceeds quantitatively, the molecular weights of products are relatively high, M̄_n = 1500–2500 at 35 °C and about 600 at 60 °C. It is assumed that initiation proceeds via [isobutylene · SnCl₄] charge transfer complex which is thermally excited and gives isobutylene radical‐cations. Oxygen inhibits the polymerization from −20 to 20 °C. Possible role of traces of water at temperatures above 20 °C is discussed. It was verified by NMR analysis that only low molecular weight polyisobutylenes are formed with high contents of exo‐ terminal unsaturated structures. In addition to standard unsaturated groups, new structures were detected in the products. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1568–1579, 2000     

The formation of radical cations of styrene and α-methylstyrene in the irradiation of mixtures of these monomers with TiCl4 and SnCl4 in a semicrystalline heptane matrix

The formation of paramagnetic intermediates following the irradiation of styrene, α-methylstyrene, and their mixtures at ?90°C in the presence of TiCl⁴ and SnCl⁴ in the polycrystalline heptane matrix was investigated. The effect of light on vinyl aromatic monomers leads to the formation of radical cations of styrene and α-methylstyrene, which subsequently initiate the polymerization. The polymerization of styrene and α-methylstyrene supposedly proceeds via the cationic mechanism.     

Influence of monomer structure on chemo- and stereoselectivity of 1,3-diene polymerization

MAO/CpTiCl₃ is an active catalyst for the polymerization of various types of 1,3-dienes. Butadiene, (E) - and (Z) −1,3-pentadiene, (E) −2-methyl-1,3-pentadiene and 2,3-dimethylbutadiene yield, at room temperature, polymers with a cis-1,4 or a mixed cis/1,2 structure. 4-Methyl-1,3-pentadiene and (E,E) −2,4-hexadiene give, respectively, a 1,2 syndiotactic and a trans-1,4/1,2 polymer. MAO/CpTiCl₂·2THF and MAO/(CpTiCl₂)_n are less active than the CpTiCl₃ catalyst, but give the same type of polymers. A change of stereospecificity with temperature was observed in the polymerization of (Z)-1,3-pentadiene: a cis-1,4 isotactic polymer was obtained at +20°C, and a crystalline 1,2 syndiotactic polymer at −20°C. This effect was attributed to a different mode of coordination of the monomer, which is cis-η⁴ at +20°C and may be trans-η² at −20°C. Results obtained with catalysts from CpTi(OBu)₃ and Ti(OBu)₄ are reported for comparison. An interpretation is given of the formation of cis-1,4 isotactic poly(2-methylpentadiene) and of 1,2 syndiotactic poly(4-methylpentadiene), as well as of syndiotactic polystyrene.     

Photopolymerization of methyl methacrylate and some other vinyl monomers with the use of chlorine as photoinitiator

Low concentrations (0.001–0.03M) of chlorine easily induce photopolymerization of MMA at 40°C. Kinetic data indicate that polymerization follows a radical mechanism involving complexation of monomer by the initiator and initiation takes place through radical generation during photodecomposition of the initiator-monomer complex. Termination appears to take place bimolecularly. The k_p²/k_t value for MMA polymerization at 40°C was found to be 0.83 × 10^?2. Rates of chlorine-initiated photopolymerization were found to decrease in the order MMA, EMA ? VA, Sty > MA.     

Synthesis of polyethylene thermoplastic elastomer by using robust α-diimine Ni(II) catalysts with abundant tBu substituents

The synthesis of polyethylene thermoplastic elastomers via α-diimine-nickel-catalyzed ethylene polymerization using polymerization conditions of elevated temperatures and alkane solvents is highly desirable in industrial production. In this contribution, we constructed a series of highly sterically demanding α-diimine Ni(II) catalysts with abundant ^tBu substituents for this purpose. These nickel catalysts were examined for ethylene polymerization in hexanes at elevated temperatures (up to 90°C) and proved to be thermally robust at temperatures as high as 90°C. Generally, these nickel catalysts can generate highly branched (ca. 70–80/1000°C) polyethylenes with very high molecular weight (M_n up to 55.79 × 10⁴ g/mol) and the resultant polyethylenes displayed characteristics of thermoplastic elastomers with excellent elastic recovery (SR up to 84%). Compared with some similar α-diimine Ni(II) catalysts, it is shown that the presence of axial remote ^tBu substituents not only facilitates the dissolution of the catalyst in alkanes, but also improves the elastic recovery value of the obtained polyethylene.     

Syndioselective propylene polymerization catalyzed by rac-2,2-dimethylpropylidene (1-η5-cyclopentadienyl) (1-η5-fluorenyl) dichlorozirconium

Syndioselective propylene polymerization has been promoted by rac-2,2-dimethylpropylidene (1-η⁵-cyclopentadienyl) (1-η⁵-fluorenyl) dichlorozirconium ( 1 ). The active catalytic species were generated using either triphenylcarbenium tetrakis (pentafluorophenyl) borate ( 2 ) (Zr⁺ method) or methylaluminoxane (MAO method). The former exhibited much higher activity than the latter, especially at low polymerization temperatures (T_p). Syndiotactic poly (propylene) (s-PP) obtained at T_p = ?20°C has T_m approaching 160°C, [rrrr] pentad fraction of 0.92 to 0.95, and 45% crystallinity (X_c). It crystallized in two antichiral unit cells B and C. The C structure is favored by low temperature of polymerization, slow crystallization from melt, and annealing. The s-PP has M?_w/M?_n ranging from 3.6 to 4.4, which can be separated into stereoregular fractions soluble in heptane and hexane and stereoirregular fractions soluble in pentane, ether, and acetone. Therefore, this system cannot be considered to be a single-site catalyst. A parallel study was made on the isopropylidene (1-η⁵-cyclopentadienyl) (1-η⁵-fluorenyl) dichlorozirconium ( 3 )/MAO catalyst. Molecular mechanics calculations were performed for all combinations of the configuration of asymmetric centers. The steric energy favors syndiotactic enchainment for both catalysts 1 and 3 , with 1 forming the more syndioselective catalyst. © 1994 John Wiley & Sons, Inc.     

Proton-transfer polyaddition reactions in syntheses of linear,branched, and functionalized poly(p-divinyl aromatics). I. Synthesis,kinetics, and mechanism of formation of linear unsaturated poly[bis(p-vinylphenyl) ether]

A peculiar step-growth (cationic) polymerization of bis(p-vinylphenyl) ether (BVPE) in nonpolar or slightly polar aromatic solvents in the temperature range from 70 to 150°C in the presence of 2.5–5.0 mmol/L of p-toluenesulfonic acid has been studied. Optimum polymerization conditions were found. New linear unsaturated polymers of BVPE with terminal vinyl groups and weight-average molecular weight from 1500 to 10,000 were obtained. The structure and the formation mechanism of these oligomers and polymers were established, and the accompanying side reactions were considered. The rate constants were measured for eight temperatures, and the activation energy was found to be −42 kJ/mol. The optimum polymerization temperature was about 80°C. © 1996 John Wiley & Sons, Inc.