Benzocyclobutene in polymer synthesis. II. Solid state diels–alder polymerization utilizing an in situ generated diene and an alkyne

A novel class of aromatic imide AB-monomers with benzocyclobutene and an alkyne (primarily phenylethynyl group) as the reactive units have been prepared. The monomers have been utilized in thermally induced Diels–Alder polymerizations. The differential scanning calorimetric study of the AB-monomers provided two observations: (i) primary acetylene began its homopolymerization (202°C max.) before the electrocyclic ring opening of benzocyclobutene (270°C max.); (ii) the phenoxy group connecting between phenylacetylenyl group and the aromatic imide fragment suppressed polymerization in Diels–Alder fashion. Furthermore, thermoxidative stability evaluation on the cured samples (250°C for 8 h and then 350°C for another 8 h under N₂ atmosphere), carried out at 650°F (air) for 200 h, indicated the more rigid phenylethynyl phthalimide system was the most heat-resistant.     

Synthesis of a poly(vinyl ether) containing a benzocyclobutene moiety and its reaction with dienophiles

1‐Benzocyclobutenyl vinyl ether (1) was easily prepared by the elimination reaction of hydrogen bromide from 1‐benzocyclobutenyl 1‐bromoethyl ether obtained by 1‐bromobenzocyclobutene and ethylene glycol via two steps in a good yield. Cationic polymerizations of 1 was carried out at −78°C for 2 h in toluene in the presence of BF₃OEt₂ as an initiator to give quantitatively the corresponding polymers (2) as white solids. As a model reaction of the polymer reaction of 2 with dienophiles, the Diels–Alder reactions of 1‐methoxybenzocyclobutene with maleic anhydride (MA) in toluene at 100–140°C for 3 h were carried out to obtain the corresponding Diels–Alder adduct quantitatively at 140°C. The polymer reactions of 2 with MA and N‐phenylmaleimide (MI) in toluene were carried out to yield the corresponding Diels–Alder adduct polymers in good yields. The degree of introduction of the dienophile could be controlled by temperature, and the unreacted benzocyclobutene moiety could further react with another benzocyclobutene moiety or dienophile. The properties (solubilities, T_g, and temperature of 10% weight loss) of the polymers obtained from the polymer reaction were quite different from those of 2. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 59–67, 1999     

Synthesis,thermal and mechanical properties of benzocyclobutene-functionalized siloxane thermosets with different geometric structures

A series of benzocyclobutene-functionalized siloxane thermosets were prepared to investigate the relationship between the monomer’s chemical structure and the properties of the corresponding polymer. Monomer 1,1,3,3-tetramethyl-1,3-bis[2′-(4′-benzocyclobutenyl)]vinyldisiloxane (DVS-BCB) and 1,3,5,7-tetramethyl-1,3,5,7-tetra[2′-(4′-benzocyclobutenyl)]vinylcyclotetrasiloxane (CYC-BCB) were synthesized by Heck reaction. Copolymer Poly(DVS-BCB-co-POSS) was obtained through incorporating octavinyl-T8-silsesquioxane (Vinyl-POSS) into DVS-BCB matrix via Diels–Alder reaction. The oligomers, P-DVS-BCB, P-CYC-BCB and P-Poly(DVS-BCB-co-POSS), were obtained by refluxing the mesitylene solution of the BCB monomers at the BCB ring opening temperature. The BCB monomers and oligomers showed a similar curing behavior with an exothermic peak temperature near 260 °C. The curing kinetic parameters, the apparent activation energy (E_a), the frequency factor (A) and the reaction order (n), were obtained by non-isothermal DSC method. The BCB polymers possessed good thermal stability (T_d > 450 °C in N₂). Due to the highly crosslinked network structure, CYC-BCB polymer exhibited higher glass transition temperature, higher modulus and lower coefficient of thermal expansion than DVS-BCB and Poly(DVS-BCB-co-POSS) polymers. Moreover, the BCB polymers also demonstrated low dielectric constants (<2.8 at 1 MHz) and low water absorptions. The films prepared from the BCB oligomer solution showed a well planarization (root-mean-square roughness <0.5 nm).     

Polar,functionalized diene‐based material. III. Free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadienes

The bulk free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadiene with methyl, ethyl, and n‐propyl substituents was studied. The monomers were synthesized via substitution reactions of 2‐bromomethyl‐1,3‐butadiene with the corresponding dialkylamines. For each monomer the effects of the polymerization initiator, initiator concentration, and reaction temperature on the final polymer structure, molecular weight, and glass‐transition temperature (T_g) were examined. Using 2,2′‐azobisisobutyronitrile as the initiator at 75 °C, the resulting polymers displayed a majority of 1,4 microstructures. As the temperature was increased to 100 and 125 °C using t‐butylperacetate and t‐butylhydroperoxide, the percentage of the 3,4 microstructure increased. Differential scanning calorimetry indicated that all of the T_g values were lower than room temperature. The T_g values were higher when the majority of the polymer structure was 1,4 and decreased as the percentage of the 3,4 microstructure increased. The Diels–Alder side products found in the polymer samples were characterized using NMR and gas chromatography‐mass spectrometry methods. The polymerization temperature and initiator concentration were identified as the key factors that influenced the Diels–Alder dimer yield. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4070–4080, 2000     

Structural aspects of polyimides. I. Polymerization and degradation of endo-N-phenylnadimide and endo-N-isobutylnadimide

The isomerization, polymerization, and degradation aspects of endo-N-phenylnadimide and endo-N-isobutylnadimide (NPNI-N and NIBNI-N) were investigated using infrared analysis (IR), differential thermal analysis (DTA), gel permeation chromatography (GPC), thermogravimetric analysis (TG), and capillary gas chromatography-mass spectroscopic (GC–MS) techniques. Although the endotherm related to the retro-Diels–Alder reaction is not registered in the DTA thermographs, on-line mass spectrometric studies revealed the occurrence of this process. The formation of the Diels–Alder adduct of cyclopentadiene with N-isobutylnadimide (NIBNI) during the polymerization of NIBNI-N is proved. GPC studies on NPNI-N and NIBNI-N cured at 300°C for 3.0 h showed the average degree of polymerization to be three to four. The polymers obtained by curing NPNI-N and NIBNI-N at 300°C for 3.0 h showed 109.8 kJ/mol as the activation energy for degradation. The dynamic and isothermal pyrolysis studies clearly indicated the presence of intact norbornyl units in the polymer, and the breakage of ? CH₂? bridges in the strained norbornyl structural elements was found to be the point of aromatization during degradation.     

Synthesis and characterization of photosensitive benzocyclobutene‐functionalized siloxane thermosets

Two methylphenylsiloxane monomers with crosslinkable benzocyclobutene functionalities at the terminal positions, 1,1,5,5‐dimethyldiphenyl‐1,1,5,5‐di[2′‐(4′‐benzocyclobutenyl)vinyl]‐3,3‐diphenyltrisiloxane (BCB‐1) and 1,1,3,3‐dimethyl‐diphenyl‐1,1,3,3‐di[2′‐(4′‐benzocyclobutenyl)vinyl]disiloxane (BCB‐2) were prepared and characterized. By heating the solution of BCB‐1 and BCB‐2 in mesitylene, two partially polymerized resins of BCB‐1B and BCB‐2B with high molecular weight were also achieved. The monomers and their oligomers fully cured at temperatures above 250 °C. Cured BCB‐1 and BCB‐2 exhibited high T_g (257 and 383 °C) and good thermal stability (T_5% > 472 °C both in N₂ and in air). They also demonstrated low dielectric constants (2.69 and 2.66), low dissipation factors (2.36 and 2.23), and low water absorptions (0.20% and 0.17%). Moreover, a negative photosensitive formulation derived from BCB‐1B in combination with 2,6‐bis(4‐azidobenzylidene)‐4‐methylcyclohexanone (BAC‐M) as a photosensitive agent has been developed. The photosensitive composition, BCB‐1B containing 5 wt % BAC‐M, showed a sensitivity of 550 mJ/cm² and a contrast of 1.96 when it was exposed to a 365 nm light (i‐line) and developed with cyclohexanone at 25 °C. A fine negative image of 10 μm line‐and‐space pattern was also printed in a film which was exposed to 700 mJ/cm² of i‐line by contact‐printing mode. The negative image can be maintained without any pattern deformation in the curing process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6246–6258, 2009     

Design of cross-linked semicrystalline poly(ε-caprolactone)-based networks with one-way and two-way shape-memory properties through Diels-Alder reactions

Cross‐linked poly(ε‐caprolactone) (PCL)‐based polyesterurethane (PUR) systems have been synthesized through Diels–Alder reactions by reactive extrusion. The Diels–Alder and retro‐Diels–Alder reactions proved to be useful for enhancing the molecular motion of PCL‐based systems, and therefore their crystallization ability, in the design of cross‐linked semicrystalline polymers with one‐way and two‐way shape‐memory properties. Successive reactions between α,ω‐diol PCL (PCL₂), furfuryl alcohol, and methylene diphenyl 4,4′‐diisocyanate straightforwardly afforded the α,ω‐furfuryl PCL‐based PUR systems, and subsequent Diels–Alder reactions with N,N‐phenylenedimaleimide afforded the thermoreversible cycloadducts. The cross‐linking density could be modulated by partially replacing PCL‐diol with PCL‐tetraol. Interestingly, the resulting PUR systems proved to be semicrystalline cross‐linked polymers, the melting temperature of which (close to 45 °C) represented the switching temperature for their shape‐memory properties. Qualitative and quantitative measurements demonstrated that these PUR systems exhibited one‐way and two‐way shape‐memory properties depending on their cross‐linking density.     

Preparation of a Porous polymer by a catalyst‐free diels‐alder reaction and its structural modification by post‐reaction

A microporous polymer is prepared by a catalyst‐free Diels–Alder reaction. A cyclopentadiene with both a diene and a dienophile functionality and a dienophilic maleimide are used for the Diels–Alder reaction. 1,3,5‐Tris(bromomethyl)‐2,4,6‐trimethylbenzene is reacted with sodium cyclopentadienide to produce the multicyclopentadiene‐functionalized monomer. A crosslinked polymer ( CDAP ) is obtained by the reaction of the cyclopentadiene monomer with N,N′‐1,4‐phenylenedimaleimide. The thermal dissociation of the cyclopentadiene dimeric unit and the subsequent Diels–Alder reaction with the maleimide group are investigated by the model reaction. We are able to restructure the crosslinked polymer network by taking advantage of the thermal reversibility of the Diels–Alder linkage. After the post thermal treatment, the BET surface area of the polymer ( CDAP‐T ) is greatly increased from 317 to 1038 m² g^?1. CDAP‐T is functionalized with pyrene by bromination with N‐bromosuccinimide and the subsequent substitution reaction with aminopyrene. The adsorption property of the pyrene‐functionalized polymer for an aromatic dye is investigated using malachite green. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3646–3653     

Benzocyclobutene in polymer synthesis. I. Homopolymerization of bisbenzocyclobutene aromatic imides to form high-temperature resistant thermosetting resins

A series of new bisbenzocyclobutene-terminated aromatic imide monomers has been synthesized from the condensation reaction of 4-aminobenzocyclobutene and the perspective dianhydride in refluxing acetic acid/toluene. The differential scanning calorimetric studies of the foregoing monomers indicated that polymerization exotherms began at 229–250°C and reached their maxima at 258–263°C. The cured samples (250–254°C; N₂; 8 h) were surprisingly stable toward thermo-oxidative degradation; only 7–10% weight loss was observed after 200 h (in air) at 314°C (600°F). At higher temperatures (650 and 700°F), the most rigid structure was the most thermo-oxidatively stable. An approach to enhance both the final glass-transition temperature (T_g cure) and the thermo-oxidative stability of the bisbenzocyclobutene system was to dilute the cure-site density since the cure-site structure is the weakest part of the polymeric structure. Therefore, a series of bisbenzocyclobutene-terminated aromatic imide oligomers were prepared, using various aromatic amines as the chain-extending agents. Meta-phenylenediamine was apparently the most effective in the advancement of both the T_g (cure) and thermo-oxidative stability.     

Styrene 4‐vinylbenzocyclobutene copolymer for microelectronic applications

Styrene and 4‐vinylbenzocyclobutene (vinyl‐BCB) random copolymers were prepared by free radical polymerization and studied for suitability as a dielectric material for microelectronic applications. The percentage of vinyl‐BCB in the copolymer was varied from 0 to 26 mol % to optimize the physical and mechanical properties of the cured copolymer as well as the cost. Copolymer in which 22 mol % of vinyl‐BCB was incorporated along with styrene produced a thermoset polymer which, after cure, did not show a T_g before decomposition at about 350 °C. The polymeric material has a very low dielectric constant, dissipation factor, and water uptake. The fracture toughness of the copolymer was improved with the addition of 20 wt % of a star‐shaped polystyrene‐block‐polybutadiene. Blends of the poly(styrene‐co‐vinyl‐BCB) with the thermoplastic elastomer provided material that maintained high T_g of the cured copolymer with only a slight decrease in thermal stability. The crosslinked styrenic polymer and toughened blends possess many properties that are desirable for high frequency‐high speed mobile communication applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2799–2806, 2008     

The Synthesis of Naphthosultine and Benzodisultines and Their Pyrolysis with Dienophiles: Studies on o‐Naphthoquinodimethane and Bis‐o‐Quinodimethane

Sealed tube reactions of the naphthosultine 8 with a series of electron‐deficient dienophiles (fumaronitrile, N‐phenylmaleimide, dimethyl fumarate, and dimethyl acetylenedicarboxylate) in toluene at 180 °C gave corresponding 1:1 cycloadducts 11–14 in various amounts along with rearranged naphthosulfolene 7 in 67–95% yields. The reaction of 1,2,4,5‐tetra(bromomethyl)benzene with Rongalite (sodium form aldehyde sulfoxylate) and tetrabutylammonium bromide in DMF gave benzodisultines 17 and 18 in a combined yield of 56%. Sealed tube reactions of benzodisultines 17 and 18 with a series of dienophiles in xylene at 200 °C gave corresponding 1:1 and 1:2 cycloadducts 20–27 . The results suggested that thermal extrusion of sulfurdioxide from these sultines led to either o‐naphthoquinodimethane 6 (from 8 ) or bis‐o‐quinodimethane 19 (from 17 and 18 ); sub sequent trapping of these reactive intermediates by dienophiles and SO₂ gave various 1:1 and 1:2 Diels‐Alder ad ducts in modest to excellent yields.     

Thermally reversible covalently bonded linear polymers prepared from a dihalide monomer and a salt of dicyclopentadiene dicarboxylic acid

Alkali and earth‐alkali salts of dicyclopentadiene dicarboxylic acid (DCPDCA) were prepared and employed as monomers in the polyesterification with an α,ω‐dihalide monomer, such as 1,4‐dichlorobutane (DCB), 1,4‐dibromobutane (DBB), α,α′‐dichloro‐p‐xylene (DCX), and α,α′‐dibromo‐p‐xylene (DBX). Novel linear polymers that possessed repeating moieties of dicyclopentadiene ( DCPD ) in the backbone were thus prepared. The IR and NMR spectra indicated that poly(tetramethylene dicyclopentadiene dicarboxylate) (PTMDD) with a number‐average molecular weight (M_n ) of about 1× 10⁴ and poly(p‐xylene dicyclopentadiene dicarboxylate) (PXDD) with a M_n of 4–6 × 10³ were obtained with an yield of about 80% via the polyesterification of the alkali salts with DBB and DCX, respectively. The reaction was carried out in the presence of a phase transfer catalyst, such as BzMe₃NBr or poly(ethylene glycol), in DMF at 100 °C for 4 h. Oligomers with a lower M_n (1–2 × 10³) were obtained when the earth‐alkali salts were employed as salt monomers. Compared to the irreversible linear polymers, poly(p‐xylene terephthalate) (PXTP) and poly(p‐xylene maleate) (PXM), prepared through the reaction between DCX and the potassium salts of terephthalic and maleic acid, respectively, the specific viscosities (η_sp) of the new linear polymers increased abnormally with the decrease of the temperature from 200 °C to 100 °C. This occurred due to the thermally reversible dedimerization/redimerization of  DCPD moieties of the backbone of the polymers via the catalyst‐free Diels–Alder/retro Diels–Alder cycloadditive reactions. The ratio of the η_sp at 100 °C and 200 °C of the reversible polymers was found to be much higher than that of PXTP and PXM, even when the heating/cooling cycle was carried out several times under a N₂ atmosphere. The obtained results indicated that thermally reversible covalently bonded linear polymer can be obtained by introducing the  DCPD structure into the backbone of the polymer through the polymerization of a monomer containing the  DCPD moiety. The reversible natures of the polymers and oligomers might be useful in preparing easily processable and recyclable polymers and thermosensor materials. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1662–1672, 2000     

Stereoelectronic control of the retro diels–alder reaction in 8-(N-pyrrolidyl)bicyclo[4.3.0]nona-3,7-diene isomers

The cis- and trans-annulated isomers of 8-(N-pyrrolidyl)bicyclo[4.3.0]nona-3,7-diene show different propensities for the retro Diels–Alder fragmentation following electron impact ionization. Molecular ions of the cis-annulated isomer decompose predominantly via the retro Diels–Alder reaction to give [C₉H₁₃N] ⁺· fragments of the appearance energy (AE)=8.45±0.05eV and critical energy E_c=133±8kJ mol^?1. The trans-annulated isomer gives abundant [M–H]⁺ (AE=9.34±0.08eV) and [M–C₆H₆]⁺· fragments, in addition to [C₉H₁₃N]⁺· ions of AE=8.98±0.05eV and E_c=181±8kJ mol^?1. The ionization energies (IE) were determined as IE_cis=7.07±0.05 eV and IE_trans=7.10±0.06eV. The stereochemical information is much less pronounced in unimolecular decompositions of long-lived (metastable) molecular ions which show very similar fragmentation patterns for both geometrical isomers. Nevertheless, the isomers exhibit different kinetic energy release values in the retro Diels–Alder fragmentation; T_0.5=3.8±0.3 and 4.8±0.2 kJ mol^?1 for the cis and trans isomer respectively. Topological molecular orbital calculations indicate that the retro Diels–Alder reaction prefers a two-step path, with a subsequent cleavage of the C(5)? C(6) and C(1)? C(2) bonds. The open-ring distonic intermediate represents the absolute minimum on the reaction energy hypersurface. The cleavage of the C(1)? C(2) bond is the rate-determining step in the decomposition of the cis isomer, with the critical energy calculated as 137 kJ mol^?1. The cleavage of the C(5)? C(6) bond becomes the rate-determining step in the trans-annulated isomer because of stereoelectronic control. The difference in the energy barriers to this cleavage in the isomers (ΔE=95k Jmol^?1) provides a quantitative estimate of the magnitude of the stereoelectronic effect in cation radicals.     

Synthesis and thermal properties of thermosetting bis-benzocyclobutene–terminated arylene ether monomers

A series of new bis-benzocyclobutene-endcapped arylene ether monomers was prepared and characterized. Whereas 2,6-bis(4-benzocyclobutenyloxy)benzonitrile (BCB-EBN) could be prepared in good yield using the standard procedure (K₂CO₃/NMP/toluene/Dean–Stark trap/120°C), other bis(benzocyclobutene) (BCB)-terminated monomers containing ether-benzophenone (BCB-EK), ether-phenylsulfone (BCB-ES), and ether-6F-benzoxazole (BCB-EBO) moieties were invariably contaminated by mono-endcapped products under similar reaction conditions. This can be attributed to a much greater activating effect of the nitrile group on the ortho-fluorides in the aromatic nucleophilic displacement reaction than the carbonyl, sulfonyl, and benzoxazolyl groups. However, the latter monomers could be synthesized (70–80%) from 4-trimethylsiloxybenzocyclobutene and respective aromatic fluorides in the presence of CsF at 140°C. Similar curing behaviors under N₂ (DSC: extrapolated onset and peak temperatures at 227–230° and 260–262°C, respectively) characterized all four monomers. BCB-EK, BCB-ES, and BCB-EBN showed melting transitions at 108, 119, and 146°C, in that order. As BCB-EBO contained more rigid benzoxazole segments, it only exhibited a glass transition (T_g) at 85°C prior to curing exotherm, after it had been previously heated to 125°C. The following T_gs were observed for the cured materials: BCB-EK (201°C), BCB-EBN (224°C), BCB-ES (264°C), and BCB-EBO (282°C). The relative thermal stability according to TGA (He) results is: BCB-ES < BCB-EBN < BCB-EK < BCB-EBO. Finally, the results from thermal analysis, infrared spectroscopic, and variable temperature microscopic studies indicated that the nitrile group plays an important role in the cure chemistry, thermal, and microstructural properties of BCB-EBN. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2637–2651, 1998     

Graft copolymers via ROMP and Diels–Alder click reaction strategy

Anthracene‐functionalized oxanorbornene monomer and oxanorbornenyl polystyrene (PS) with ω‐anthracene end‐functionalized macromonomer were first polymerized via ring‐opening metathesis polymerization using the first‐generation Grubbs' catalyst in dichloromethane at room temperature and then clicked with maleimide end‐functionalized polymers, poly(ethylene glycol) (PEG)‐MI, poly(methyl methacrylate) (PMMA)‐MI, and poly(tert‐butyl acrylate) (PtBA)‐MI in a Diels–Alder reaction in toluene at 120 °C to create corresponding graft copolymers, poly(oxanorbornene)‐g‐PEG, poly(oxanorbornene)‐g‐PMMA, and graft block copolymers, poly(oxanorbornene)‐g‐(PS‐b‐PEG), poly(oxanorbornene)‐g‐(PS‐b‐PMMA), and poly(oxanorbornene)‐g‐(PS‐b‐PtBA), respectively. Diels–Alder click reaction efficiency for graft copolymerization was monitored by UV–vis spectroscopy. The dn/dc values of graft copolymers and graft block copolymers were experimentally obtained using a triple detection gel permeation chromatography and subsequently introduced to the software so as to give molecular weights, intrinsic viscosity ([η]) and hydrodynamic radius (R_h) values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

V‐shaped graft copolymers via triple click reactions: Diels–alder,copper‐catalyzed azide–alkyne cycloaddition,and nitroxide radical coupling

We report here a simple and universal synthetic pathway covering triple click reactions, Diels–Alder, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), and nitroxide radical coupling (NRC), to prepare well‐defined graft copolymers with V‐shaped side chains. The Diels–Alder click reaction between the furan protected‐maleimide‐terminated poly(ethylene glycol) (PEG) and a trifunctional core ( 1 ) carrying an anthracene, alkyne, and bromide was carried out to yield the corresponding α‐alkyne‐ and α‐bromide‐terminated PEG (PEG‐alkyne/Br) in toluene at 110 °C. Subsequently, the polystyrene or polyoxanorbornene with pendant azide functionality as a main backbone is reacted with the PEG‐alkyne/Br and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐terminated poly(ε‐caprolactone) using the CuAAC and NRC reactions in a one‐pot fashion in N,N′‐dimethylformamide at room temperature to result in the target V‐shaped graft copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4667–4674     

Synthesis and diels–alder polymerization of furfurylidene and furfuryl-substituted maleamic acids

The reactions of monomaleamic acid derived from an aromatic diamine with furfural afforded a novel class of furfurylidene-substituted maleamic acids 2a–2d . The latter were cyclodehydrated to yield maleimides 3a–3d which are AB-monomers for a Diels–Alder polymerization. In addition, N-furfurylmaleamic acid ( 4 ) was synthesized by reacting furfurylamine with maleic anhydride at ambient temperature. Cyclodehydration of 4 afforded N-furfurylmaleimide ( 5 ). The polymer precursors were characterized by IR and ¹H-NMR spectroscopy. Their curing behavior was investigated by DTA and correlated with chemical structures. Diels–Alder polymerization of monomers occurred at the temperature range of 113–210°C. Thermal stability of monomers was evaluated by TGA and isothermal gravimetric analysis (IGA). It was shown that thermal stability of the polymer derived from maleamic acid 4 was dramatically improved upon curing at high temperatures due to the formation by dehydration of a stable aromatic structure.     

Sucrose-based epoxy monomers and their reactions with diethylenetriamine

Two sets of sucrose-based epoxy monomers, namely, epoxy allyl sucroses (EAS), and epoxy crotyl sucroses (ECS), were prepared by epoxidation of octa-O-allyl and octa-O-crotyl sucroses (OAS and OCS, respectively). Synthetic and structural characterization studies showed that the new epoxy monomers were mixtures of structural isomers and diastereoisomers that contained varying numbers of epoxy groups per sucrose. EAS and ECS can be tailored to contain an average of one to eight epoxy groups per sucrose. Quantitative ¹³C-NMR spectrometry and titrimetry were used independently to confirm the average number of epoxy groups per sucrose. Sucrose-based epoxy monomers were cured with diethylenetriamine (DETA) in a differential scanning calorimeter (DSC), and their curing characteristics were compared with those of diglycidyl ether of bisphenol A (DGEBA) and diepoxycrotyl ether of bisphenol A (DECEBA). EAS and DGEBA cured at 100 to 125°C and exhibited a heat of cure of about 108.8 kJ per mol epoxy. ECS and DECEBA cured at 150 and 171°C, respectively, and exhibited a heat of cure of about 83.7 kJ per mol epoxy. Depending upon the degree of epoxidation (average number of epoxy groups per sucrose) and the concentration of DETA, glass transition temperatures (T_gs) of cured EAS varied from −17 to 72°C. DETA-cured ECS containing an average of 7.3 epoxy groups per sucrose (ECS-7.3) showed no DSC glass transition between −140 and 220°C when the ratio of amine (NH) to epoxy group was 1:1 and 1.5:1. Maximum T_gs obtained for DETA-cured DGEBA and DECEBA polymers were 134 and 106°C, respectively. DETA-cured bisphenol A-based epoxy polymers degraded at about 340°C, as observed by thermogravimetric analysis (TGA). DETA-cured sucrose-based epoxy polymers degraded at about 320°C. Sucrose-based epoxies cured with DETA were found to bind aluminum, glass, and steel. Comparative lap shear tests (ASTM D1002–94) showed that DETA-cured epoxy allyl sucroses with an average of 3.2 epoxy groups per sucrose (EAS-3.2) generated a flexible adhesive comparable in bond strength to DGEBA. However, DETA-cured ECS-7.3 outperformed the bonding characteristics of both DGEBA and EAS-3.2. All sucrose-based epoxy polymers were crosslinked and insoluble in water, N,N-dimethylformamide, tetrahydrofuran, acetone, and dichloromethane. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2397–2413, 1998     

Tetrachloro-p-(o,p)-o-tribenzene: A Building Block for Diels–Alder Oligomers of Benzene and for a Laticyclic Conjugated Hexaene

Intermolecular cycloaddition of the bifunctional tetrachlorotribenzene 1 results in higher Diels–Alder oligomers of benzene ( 2 ), of which the linear and an angular hexamer (n=1) were characterized. The oligomers decompose above 110°C through stepwise extrusion of benzene and tetrachlorobenzene.     

Thermally stable second-order nonlinear optical addition-type polyimides functionalized by diamine chromophore

A series of chromophore-functionalized polyimide prepolymers with excellent processibility were prepared by a Michael addition reaction of diamine chromophore 2 with structurally different bismaleimide (BMI) monomers. The effects of the BMI moiety's structure and thermal curing condition on glass transition temperature (T_g) and thermal stability of the polyimides were studied by DSC, TGA, and FTIR. Among the five cured polyimides, PI₃, bearing a sulfone moiety, exhibited the highest T_g and thermal decomposition temperature (T_d). Its corresponding prepolymer, PP₃, was selected to evaluate NLO properties in a simultaneously poling and thermal polymerization process. A relatively large poling-order parameter was observed. The second-order nonlinear coefficient, d₃₃, was 25 pm/V at 1064 nm fundamental wavelength. The second harmonic generation signal was almost without decay up to 170°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3598–3605, 1999