Anionic polymerization of acrylates. II. Polymerization of 2-ethylhexyl acrylate initiated by butyllithium/lithium-tert-butoxide system in tetrahydrofuran and its mixtures with toluene

The anionic polymerization of 2-ethylhexyl acrylate (EtHA) initiated with the complex butyllithium/lithium-tert-butoxide (BuLi/t-BuOLi) was investigated at ?60°C in a medium of various solvating power, i.e., in mixtures of toluene and tetrahydrofuran and in neat tetrahydrofuran. With increasing amount of THF in the mixture the attainable limiting conversion of polymerization decreases; the monomer can be polymerized quantitatively only in a toluene/THF mixture (9/1). Molecular weights of the polymers thus obtained, their distribution, and initiator efficiency are not appreciably affected by the polymerization medium. The molecular weight distribution of the products is medium-broad (M_w/M_n = 2–2.4), with a hint of bimodality. The ¹H-¹³C-NMR, and IR spectra suggest that during the polymerization there is neither any perceptible reesterification of the polymer with the alkoxide nor transmetalation of the monomer with the initiator. In a suitable medium, autotermination of propagation proceeds to a limited extent only, predominantly via intramolecular cyclization of propagating chains; in a medium with a higher content of polar THF, it prevails and terminates propagation before the polymerization of the monomer has been completed. © 1992 John Wiley & Sons, Inc.     

Anionic Polymerization of Chiral Isocyanate and Influence of the Initiator on Changes in the Optical Activity

A chiral polyisocyanate, poly[6‐{1‐[(S)‐(–)‐2‐methylbutyl]oxycarbonylamino}hexyl isocyanate], was synthesized using sodium diphenylmethanide and sodium naphthalenide as unidirectional and bidirectional initiators, respectively, via anionic polymerization in THF at –98°C. NaBPh₄ as a common ion salt was used to produce the polymer in quantitative yield and with narrow molecular‐weight distribution. The polymer showed different optical activity depending on the nature of the initiator.     

Hydrogen‐transfer polymerization of vinyl monomers derived from 4‐methylbenzoyl isocyanate and acrylamide derivatives

The anionic polymerization of N‐acryloyl‐N′‐(4‐methylbenzoyl)urea (1) was carried out at 80°C for 24 h in DMF, DMSO, acetonitrile, or toluene by t‐BuOK or DBU (3 mol %) as an initiator to obtain polymer 3 in a good yield. The structure of 3 was dependent upon the initiator used, in which t‐BuOK selectively conducted the hydrogen‐transfer polymerization, while DBU partially induced the vinyl polymerization (16–20%). Likewise, N‐acryloyl‐N‐methyl‐N′‐(4‐methylbenzoyl)urea (2, i.e., an N‐methylated derivative of 1) was subjected to the hydrogen‐transfer polymerization. Although the yield of the polymer was lower in comparison with 1, the structure of the obtained polymer 4 was similarly governed by the initiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 465–472, 1999     

Anionic polymerization. VI. Effect of polar modifiers on alkylsodium and alkylpotassium polymerization of butadiene

It was found that N,N,N′,N′-tetramethylethylene diamine and hexamethyl phosphorus triamide minimize chain transfer reactions in the polymerization of 1,3-butadiene in hydrocarbon solvent with alkylsodium or alkylpotassium initiators. The polymers obtained with alkylsodium initiators had a high molecular weight and high vinyl content at 90–95% conversion. The molecular weight of the polybutadiene made by alkylsodium and alkylpotassium initiators was dependent on the polymerization temperatures and modifier ratios, but the vinyl contents were independent of the modifier ratios. Vinyl contents of alkylpotassium-initiated polymers showed a slight dependency on polymerization temperature; the vinyl contents of alkylsodium-initiated polymers were independent of temperature. Addition of lithium tert-butoxide and potassium tert-amylate to these initiators in the presence of the modifiers affected the molecular weight but not the microstructure.     

Polylactones 27. Anionic polymerization of L-lactide. Variation of endgroups and synthesis of block copolymers with poly(ethylene oxide)

L-Lactide was polymerized in toluene with various alkoxide initiators. These initiators were prepared in situ from potassium t.-butoxide and primary or secondary alcohols such as tetradecanol, diethylene glycol butyl ether, menthol or testosteron. All these alcohols were incorporated as ester endgroups into the polylactide chain. However ¹H-NMR spectroscopy proves the existence of more OH-endgroup than ester endgroups. This finding and 10–20% racemization observed for all anionic polymerizations suggest that chain-transfer reactions with the monomer via deprotonation take place. When poly(ethylene glycol) monomethyl ether in combination with KOtBu was used as initiator, twoblock copolymers were obtained. With poly(ethylene glycol) A-B-A-triblock copolymers could be synthesized. The quantitative reaction of the poly(ethylene glycol)s with L-lactide could be proven by both ¹H NMR spectroscopy and gelpermeation chromatography. DSC-measurements show that depending on their lengths either the polylactide or the poly(ethylene oxide)blocks can crystallize. Due to partial racemization the melting temperatures (T_m) of the poly(L-lactide) blocks did not exceed 155°C.     

Further Studies on the Anionic Copolymerization of Styrene and Glycidyl Methacrylate in Toluene

Sequential anionic copolymerization of styrene and glycidyl methacrylate (GMA) was performed with the protection of argon under normal pressure, where styrene, GMA, toluene, THF, n-butyllithium and a small amount of lithium chloride (LiCl) were used as first monomer, second monomer, solvent, polar reagent, initiator and additive, respectively. Polystyrene-b-poly(glycidyl methacrylate) diblock copolymers (PS-b-PGMA) with well-defined structure and narrow molecular weight distribution were prepared by the copolymerization reaction of poly(styryl)lithium with GMA under certain temperatures. The copolymers were characterized using gel permeation chromatography (GPC), ¹H-NMR, ¹³C-NMR, thin layer chromatography (TLC) and hydrochloric acid-dioxane argentimetric methods. The effects of additives, copolymerization temperature and THF dosage on the copolymerization were studied. No chain transfer reaction of anionic polymerization of styrene in toluene was observed. Slightly broader molecular weight distribution of PS-b-PGMA was observed with the increase the GMA repeat units. Using THF/toluene blend solvent could reduce the polydispersity index (M _w /M _n ) and dissolve the copolymer better than toluene alone. Lower temperature (< -40°C) and LiCl are required to prepare PS-b-PGMA with narrower molecular weight distribution.     

Effect of tetraalkylammonium salts on the tacticity of poly(methyl methacrylate), 2.. Initiation by potassium tert-butoxide

The anionic polymerization of methyl methacrylate was carried out in the presence of potassium tert-butoxide (t-BuOK)/quaternary ammonium salts (QAS) in toluene and tetrahydrofuran at −60°C. It was found that in toluene some QAS additives substantially increase the syndiotacticity of poly(methyl methacrylate). Two types of QAS were distinguished, quite different in their action. The addition of QAS with one or two longchain alkyl groups (>C₁₂), does not change significantly the mode of the monomer addition, whereas the polymerization in the presence of tetraalkylammonium salts with four equal substituents and dimethyldidodecylammonium bromide yields predominantly a syndiotactic polymer with high conversion and comparatively low polydispersity (M̄_w/M̄_w = 1.3−1.5). In some cases QAS additives are more effective modifiers than cryptand [2.2.2].     

Preparation of functional polymers by living anionic polymerization: Polymerization of allyl methacrylate

The anionic polymerization of allyl methacrylate was carried out in tetrahydrofuran, both in the presence and in the absence of LiCl, with a variety of initiators, at various temperatures. It was found that (1,1-diphenylhexyl)lithium and the living oligomers of methyl methacrylate and tert-butyl methacrylate are suitable initiators for the anionic polymerization of this monomer. The temperature should be below −30°C, even in the presence of LiCl, for the living polymerization to occur. When the polymerization proceeded at −60°C, in the presence of LiCl, with (1,1-diphenylhexyl)-lithium as initiator, the number-average molecular weight of the polymer was directly proportional to the monomer conversion and monodisperse poly(allyl methacrylate)s with high molecular weights were obtained. ¹H-NMR and FT-IR indicated that the α CC double bond of the monomer was selectively polymerized and that the allyl group remained unreacted. The prepared poly(allyl methacrylate) is a functional polymer since it contains a reactive CC double bond on each repeating unit. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2901–2906, 1997     

Stereospecific polymerization of o-methoxystyrene by anionic initiators

o-Methoxystyrene was polymerized with n-butyllithium (n-BuLi), Na naphthalene, and K dispersion as initiators in tetrahydrofuran (THF) and toluene. The stereoregularity of the polymer was investigated by means of the NMR spectroscopy. The methoxy resonance of the spectrum split into ten components due to the tactic pentads. It was found by x-ray examination that the polymer obtained by n-BuLi in toluene at ?45°C was crystalline and highly isotactic. In THF, the stereospecificity of the polymerization was independent of the initiator, and the isotacticity of the polymer increased with increasing reaction temperature. In toluene, the stereospecificity depended on the initiator; i.e., n-BuLi gave a polymer with higher isotacticity than that given by phenylsodium. The fraction of isotactic triad of the polymer obtained by n-BuLi in toluene at ?78°C was more than 90%, but 50% at 50°C. The presence of ca. 1% THF in toluene led to a steep decrease in the isotacticity even at ?78°C. The tacticity of the polymer given by Na naphthalene was not affected by the existence of NaB(C₆H₅)₄ in THF. The polymerization in THF could be explained by Bovey's “single σ” process, while a penultimate effect was observed in the polymerization by n-BuLi in toluene.     

Anionic polymerization of 9‐vinylanthracene with the alkyllithium/amine system

The anionic polymerization of 9‐vinylanthracene (VAN) with the alkyllithium (RLi)/amine system was examined to explore new initiator systems that could polymerize VAN at moderate temperatures in hydrocarbon solvents. Important factors in the anionic polymerization of VAN were found to be the high nucleophilicity of the RLi/amine and poly(9‐vinylanthracenyl)lithium (PVANLi)/amine systems, the low steric hindrance of the amine molecule, and good solubility of PVANLi during the polymerization. The t‐butyllithium (t‐BuLi)/N,N,N',N'‐tetramethylethylenediamine (TMEDA) (1.00/1.25) system achieved the highest PVAN yield in toluene at room temperature (ca. 25°C), although the limitations of yield and the number average molecular weight (M_n) were around 90 wt% and 2000, respectively. The results obtained from spectrum analyses suggested that the anionically polymerized PVAN would be considered a favorable polymer for the preparation of new luminescent materials. Copyright © 2009 John Wiley & Sons, Ltd.     

Anionic polymerization and copolymerization of S-methyl thiomethacrylate

S-Methyl thiomethacrylate (methyl thiolmethacrylate, MTMA) was polymerized with a variety of anionic initiators such as n-BuLi, octylpotassium, PhMgBr, and Et₂AlNPh₂ in toluene and THF. Stereoregularity of the polymer (PMTMA) was determined from the ¹H-NMR spectrum of poly(methyl methacrylate), which had been derived from PMTMA, because the α-methyl resonance in the ¹H-NMR spectrum of PMTMA was not satisfactorily solved owing to the overlap of pentad signals. The ¹³C-NMR spectrum of PMTMA also showed the splitting due to pentad sequences. Stereoregularity of PMTMA was always low compared with that of poly(methyl methacrylate), which was prepared under the same reaction conditions. MTMA was much more reactive than methyl methacrylate and methacrylonitrile in the copolymerization with n-BuLi in toluene and in THF at ?78°C. The lower stereoregulation of the polymerization of MTMA and the higher reactivity of MTMA were mainly ascribed to the higher resonance effect of MTMA.     

Synthesis of poly(methyl methacrylate) macromonomer

Anionic polymerization of methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) or THF/toluene mixture at ?78°C initiated by triphenylmethyl sodium or lithium as initiators. Highly syndiotactic PMMA of low polydispersity (M _w/m _n = 1.11–1.17) could be prepared with triphenylmethyl lithium in THF or THF/toluene mixture at ? 78°C. Moreover, PMMA macromonomer having one vinylbenzyl group per polymer chain was prepared by the couplings of living PMMA initiated by triphenylmethyl lithium with p-chloromethyl styrene (CMS) at ?78°C. The coupling reaction of living PMMA initiated by triphenylmethyl sodium with CMS was scarcely occurred.     

Vinyl polymerization by lithium organocuprates

Vinyl polymerizations initiated by lithium organocuprates under several conditions were investigated. It was observed that this catalyst was effective in the polymerization of specific monomers such as α,β-unsaturated nitrile and carbonyl analogues. The rate of polymerization was rapid but retarded by the addition of pyridine, nitrobenzene, or hydroquinone. Polymerization of methyl methacrylate (MMA) with lithium di-n-butylcuprate as initiator produces predominantly isotactic poly(methyl methacrylate) (PMMA) in toluene. The overall activation energy was estimated as 3.5 kcal/mol deg. Lithium di-n-butylcuprate exerts a higher stereoregulating effect on the addition of monomers than other organolithium initiators. It is proposed that polymerization proceeds via a coordinated anionic mechanism.     

Polymerization of N-(2,3,4,5,6-pentafluorophenyl)-maleimide

A novel fluorine-containing polymer, poly[N-(2,3,4,5,6-pentafluorophenyl)maleimide], was prepared by the anionic polymerization of N-(2,3,4,5,6-pentafluorophenyl)maleimide (PFPMI). Anionic polymerization with alkali metal tert-butoxides gave poly(PFPMI) in 14–32% yield. Phenyllithium and sec-butyllithium also afforded poly(PFPMI). No polymer was obtained with a radical initiator such as 2,2′-azoisobutyronitrile. The polymerization took place only via the vinylene group of PFPMI and no appreciable side-reaction occurred. The obtained poly(PFPMI) shows unimodal molecular weight distribution and begins to decompose at 325°C.     

Anionic dispersion polymerization. I. control of particle size

Studies on the mechanism for the formation of the stable dispersion polystyrene prepared by anionic dispersion polymerization of styrene in n-hexane using poly(t-butylstyrene) as the stabilizing moiety in steric stabilizer have been performed by a combination of size exclusion chromatographic (SEC) and transmission electron microscopic (TEM) analyses. When the molecular weight of poly(t-butylstyrene) as the stabilizing moiety exceeded 1.76 X 10⁴ g/mol, the formed polymer particles successfully retained a steric stability. Block copolymerization of t-butylstyrene and styrene in n-hexane has also provided the dispersion polymer particles with a relatively narrow size distribution. The stable dispersion polystyrenes have been produced in n-hexane by polymerization of styrene using the mixture of sec-butyllithium and poly(t-butylstyryl)lithium. The polymerization is called living dispersion polymerization (LDP), in which poly(t-butylstyrene-b-styrene) as the steric stabilizer and polystyrene can be formed simultaneously. The particle size was readily controlled by a combination of the concentration of monomer and the molar ratio of poly(t-butylstyryl)lithium to sec-butyllithium, for instance, [stabilizing moiety]/[RLi]. © 1996 John Wiley & Sons, Inc.     

Anionic polymerization of methacrylate monomers initiated by lithium dialkylamides

The anionic polymerization of methacrylate monomers has been investigated with lithium dialkylamides as initiators in THF and toluene, respectively. Theoretical arguments and previous studies of mixed aggregates of lithiated organic compounds support the complexity of these systems. Lithium diisopropylamide (LDA) shows the highest initiation efficiency (e.g., f = 75% in THF at −78°C). Interestingly enough, lithium chloride has a remarkable beneficial effect on the methacrylates polymerization in THF at −78°C, due to the formation of 1 : 1 mixed dimer with LDA, which promotes a well-controlled anionic polymerization (M_w/M_n = 1.05) with a high initiation efficiency (94%). The less bulky lithium–diethylamide (LDEA) is much less efficient (f = 26%), essentially as a result of some associated “dormant” species and side reactions on the carbonyl group of MMA. Although various types of ligands have been screened, no remarkable improvement of LDEA efficiency has been observed. Lithium bis(trimethylsilyl)amide (LTMSA) has also been used to increase the steric hindrance of the initiator. This compound is, however, unable to initiate the methacrylates polymerization, more likely because of a too low basicity and a too strong Li—N bond. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3637–3644, 1997     

Anionic living polymerization of alkyl methacrylate at ambient temperature and its mechanism research

In order to break through the bottleneck of anionic polymerization, polar monomers such as methyl methacrylate (MMA), ethyl methacrylate, butyl methacrylate, and hexyl methacrylate are subjected to anionic polymerization at room temperature in tetrahydrofuran (THF) using potassium tert‐butoxide (t‐BuOK) as the initiator. The polymerization of alkyl methacrylates is studied by multidetector gel permeation chromatography, proton nuclear magnetic resonance (¹H‐NMR) and ¹³C‐NMR spectroscopy, and dynamic laser light scattering. It is found that t‐BuOK can initiate the living anionic polymerization of polar alkyl methacrylate, and the polymerization conversion almost reaches up to 100%. t‐BuOK exists into two kinds of agglomerates, whose hydrodynamic volumes are 10 and 80 nm, respectively. t‐BuOK in THF is similar to emulsion and has a critical active species concentration of about 0.0265 mol L^?1 and does not depend on how much t‐BuOK is added. After the initiation of the polymerization, the large agglomerates of a loose and less regular structure that have occupied the main part of t‐BuOK are greatly reduced, but they do not continue to decrease until they disappear according to the equilibrium theory. Similarly, the active chain after initiation also will not aggregate again. Furthermore, t‐BuOK also has an active species with smaller average vibration size between cation and anion pairs, which can only initiate the polymerization of MMA with rather slow rate but cannot initiate other alkyl methacrylates. At last, because t‐BuOK can make the dormant species caused by side reactions to be revived, the anionic polymerization of MMA could obtain a high yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1130–1139     

Tetrazoles: XLVI. 3H-1,3,4-Benzo- and Pyrido[6,7-b][1,3,4]triazepines from 5-Aryltetrazoles. Synthesis and Chemical Properties

2,5-Disubstituted 3H-1,3,4-benzotriazepines were synthesized by heating of N-imidoyltetrazoles in toluene at 110°C. Alkylation of these compounds, as well as of 3H-pyrido[6,7-b][1,3,4]triazepines with alkyl halides in THF in the presence of potassium tert-butoxide gave the corresponding 1-alkyl derivatives in good yield and with high regioselectivity.     

Anionic homopolymerization of ferrocenylmethyl methacrylate

Anionic polymerization of ferrocenylmethyl methacrylate (FMMA) was investigated using high-vacuum techniques. Initiators used included n-butyllithium, sodium naphthalide, potassium naphthalide, Grignard reagents (both C₂H₅MgBr and C₆H₅MgBr), sodium methoxide, and lithium aluminum hydride. FMMA polymerization was readily initiated by each of the above initiators with the exception of sodium methoxide. The molecular weight of poly(ferrocenylmethyl methacrylate) could be controlled by varying the monomer-to-initiator ratio when lithium aluminum hydride was used in tetrahydrofuran (THF). In this system, poly(ferrocenylmethyl methacrylate), soluble in benzene or THF, was prepared with M?_n as high as 277,000 with a relatively narrow molecular weight distribution compared to samples prepared by radical-initiated polymerization. The Mark-Houwink values of K and a, determined in THF, were K = 4.94 × 10^?2 and a = 0.53 (when M = M?_n) and K = 3.72 × 10^?2 and a = 0.51 (when M = M?_w). It is clear that the polymer is moderately coiled in THF.     

Anionic polymerization of vinyl chloride

Anionic polymerization of vinyl chloride has been studied. Of the organometallic compounds tested as initiators, only butyllithium was found to initiate polymerization. Polymerization in bulk at 0°C and with tert-butyllithium as initiator gave poly(vinyl chloride) in a yield of 38% with M _n = 55,000. Tacticity of the anionic PVC was similar to that of conventional PVC prepared at similar temperatures. Anionic PVC was found to be less branched and more heat-stable than the conventional polymer.