Spindle-inhibiting effects of organotin compounds. II. Induction of chromosomal supercontraction by di- and tri-alkyl and -aryl compounds

Spindle-inhibiting effects of chemical compounds may be studied indirectly by quantitation of chromosomal contraction. The effects of the trimethyltin (TMT), dimethyltin (DMT), tributyltin (TBT), dibutyltin (DBT), triphenyltin (TPhT) and diphenyltin (DPht) moieties as the chloride on chromosomal contraction was studied by measurement of the average length of chromosome No. 1 from asynchronous cultures of human peripheral lymphocytes. TMT, TBT, TPhT and DPhT appear to be very strong inducers of chromosomal supercontraction, indicating that these compounds conceivably are spindle inhibitors, whilst DMT and DBT seem to be ineffective. The different effects of aryl versus alkyl and trivalent versus divalent organic substituents of tin on chromosome length may relate to different modes of action.     

The determination of organic and inorganic lead compounds in urban air by atomic-absorption spectrometry with electrothermal atomization

A method for the simultaneous determination of inorganic and organic lead compounds in air is described, together with some results from its application at different sampling sites. Air-borne particulate lead is collected on a cellulose filter. Organic lead vapours are trapped in an iodine monochloride solution, placed behind the filter. A fraction of the cellulose filter is subjected to low-temperature ashing, after which the lead content in the residue is measured by electrothermal atomic-absorption spectrometry. The organolead material absorbed in the iodine monochloride solution, is determined by solvent extraction and electrothermal atomic-absorption spectrometry. For a 6-h sampling period, detection limits of the order of 10 ng m^-3 for inorganic and 8 ng m^-3 for organic lead materials may be obtained.     

Fabrication and Characteristics of ZnO/OAD-InN/PbPc Hybrid Solar Cells Prepared by Oblique-Angle Deposition

In this work, lead phthalocyanine (PbPc) and ZnO/InN inorganic semiconductor films prepared by oblique-angle deposition (OAD) were layered to form heterojunction organic/inorganic hybrid photovoltaic solar cells. Among the available organic materials, phthalocyanines, particularly the non-planar ones such as PbPc, are notable for their absorption in the visible and near infrared regions. The organic/inorganic hybrid solar cells fabricated on ZnO/OAD-InN/PbPc showed short-circuit current density (J_SC), open-circuit voltage (V_OC), and power conversion efficiencies (η) of 1.2 mA/cm², 0.6 V and 0.144%, respectively.     

Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

Thin polymer films on semiconductors: From their protection to the realization of molecular electronic devices

When homogeneously grafted as thin films on small band-gap inorganic semiconductors (n-GaAs, n-CdS), organic conjugated polymers such as poly-methylthiophene afford interesting new structures. In their doped conducting state, these polymer films bring a long-term protection of these semiconductors against their photocorrosion in aqueous medium, and the subsequent inclusion of metallic aggregates in these films allows increased catalytic activity for achieving photoelectrochemical reactions. In their undoped semiconducting state, they lead to the realization of “organic-on-inorganic” p-n junctions which show very low leakage current and high allowed current density. As photovoltaic cell, an energy conversion efficiency of 17.5% has been obtained under 100 mW.cm⁻² irradiation with a p-PMeT/n-GaAs cell. The larger number of work already devoted to organic conjugated polymers such as polyacetylene, polypyrrole, polythiophene, has shown that these compounds can be switched between a doped oxidized state, with a nearly metallic conductivity, σ ∼ 10²-10³S.cm⁻¹, and an undoped neutral state which presents semiconducting properties, σ ∼ 10⁻⁷ -10⁻⁹ S. cm⁻¹. Either as free standing film or grafted on an electrode, these polymers exhibit interesting organic electrode properties which have been widely characterized. On the other hand much less is known on their behavior when deposited on inorganic semiconductors. In the following, this area will be discussed on two examples, the protection of narrow band-gap semiconductors against their photo-degradation in aqueous solution, and the new junction properties presented by “organic-on-inorganic” electronic devices.     

14C in spent ion-exchange resins and process water from nuclear reactors: A method for quantitative determination of organic and inorganic fractions

A method of separately quantifying organic and inorganic ¹⁴C compounds present in spent ion-exchange resins and process water from nuclear power reactors has been developed. Extraction of carbon compounds is accomplished by means of acid stripping (inorganic ¹⁴C) and subsequent wet oxidation (organic ¹⁴C) or by N₂ purging in combination with a catalytic furnace (oxidized and reduced gaseous compounds) with organic and inorganic ¹⁴C species collected separately. Recovery experiments on simulated samples spiked with ¹⁴C-labeled sodium carbonate, sodium acetate and sodium formate, showed extraction yields of 94–98%. The sample-specific procedures were also tested on authentic samples of spent resins and reactor water with good results. Validation and reliability of the procedures are presented and the method is compared to previous methods reported in the literature.     

Speciation of inorganic lead and trialkyllead compounds by flame atomic absorption spectrometry following continuous selective preconcentration from aqueous solutions

A new method for the speciation of inorganic lead and trialkyllead compounds involving the selective separation of the analytes in a continuous system and their subsequent introduction into a flame atomic absorption spectrometer was developed. The proposed flow system consists of two units. In the first unit, total inorganic lead at concentrations from 8 to 200 ng ml⁻¹ is continuously precipitated as lead chromate and the filtrate, containing trialkyllead cations, is collected in a vessel, the precipitate then being dissolved in diluted acid and driven to the instrument. In the second unit, trimethyllead (TML⁺) and triethyllead (TEL⁺) cations at ng ml⁻¹ levels are complexed with sodium diethyldithiocarbamate and retained on a C₆₀ pre-conditioned fullerene column; the mixture of both species was resolved by conditioning the sorbent column with n-hexane or isobutyl methyl ketone solvents. Detection limits of 1–2 ng ml⁻¹ can be achieved by using a sample volume of 50 ml. Special attention was given to the reliability and robustness of the global flow injection method in assessing its applicability to both types of organolead compounds and inorganic lead present in different proportions. Trimethyllead provides the poorest results as consequence of its low adsorption constant on C₆₀; however, the three different types of species (Pb²⁺/TML⁺/TEL⁺) can be effectively determined in proportions from 1:1:1 to 30:12:1 with relative errors less than 10%.     

Tetrathiafulvalene-based organic conductors with Pb-containing anions

Hybrid compounds containing organic layers composed of tetrathiafulvalenes (BEDT-TTF, BETS, BEDO-TTF) and inorganic layers consisting of anions based on lead bromide were synthesized. The crystal structure of (BEDT-TTF)₆Pb₃Br₁₀(PhBr) was determined. The temperature dependences of electrical conductivity for the synthesized compounds were measured and the EPR spectra of these compounds were recorded. In the structure of (BEDT-TTF)₆Pb₃Br₁₀(PhBr), the organic conducting layers of BEDT-TTF molecules alternate with non-conducting layers composed of infinite chains of bromoplumbate anions [Pb₃Br₉]^3–, solvent molecules, and Br^– anions. The newly synthesized BEDT-TTF bromoplumbates have similar linewidths of EPR signals, which indicate that their conducting layers have similar structures. The BEDT-TTF bromoplumbates are semiconductors, while temperature-dependent electrical resistivity measurements show the metallic behavior for BEDO-TTF and BETS bromoplumbates.     

聚丙烯酰胺在硅胶表面上的吸附及其抑制的研究

聚丙烯酰胺(PAM)具有强极性,对硅胶等极性固体表面具有强烈的吸附作用,陈九顺等用4％的NaCl水溶液为淋洗液和Adamson用0.1mol/L的吗啡啉水溶液为淋洗液虽能部分解决硅胶担体对PAM样品的吸附,但他们对吸附的实质问题未进行研究,PAM等高分子化合物在固体表面上的吸附问题的研究尚处于初级阶段。     

苟日新|日日新|又日新——-值王夔教授八十寿诞侧记我国生物无机化学研究

1984年中国化学会第一届全国生物无机化学会议在武汉召开,标志了我国生物无机化学研究的开始。作为我国生物无机化学研究的重要开创者之一,王夔教授积极倡导并开展了细胞生物无机化学研究。本文以王夔教授的研究为主,侧记了我国细胞层次的生物无机化学的某些重要进展。     

All‐Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Recently, lead halide‐based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic‐inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long‐term stability. Replacing the fragile organic group with more robust inorganic Cs⁺ cations forms the cesium lead halide system (CsPbX₃, X is halide) as all‐inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX₃‐based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX₃ PSCs.     

Retention study of inorganic and organic selenium compounds on a silica-based reversed phase column with mixed ion-pairing reagents

Summary Separation of seven inorganic and organic selenium compounds, namely selenic acid [Se(VI)], selenous acid [Se(IV)], trimethylselenonium iodide (TMSe⁺), selenocystine (SeCys), selenomethionine (SeMet), selenoethionine (Seet), and selenocystamine (SeCM), has been performed on a LiChrosorb C 18 column by using mixed ion-pair reagents; 1-butanesulfonic acid and tetramethylammonium hydroxide. Flame atomic absorption spectrometry (FAAS) was used as an element-specific detector. The retention behaviors of selenium compounds in terms of several chromatographic parameters, such as pH of the mobile phase, the concentrations of ion-pair reagents, and the content of organic modifier (methanol) were investigated. It was found that the separation of both inorganic and organic selenium compounds can be achieved within 12 min with a mobile phase of 10 mM 1-butanesulfonic acid −4 mM tetramethylammonium hydroxide −4 mM malonic acid −0.05% methanol adjusted to pH 4.5 at a flow rate of 1.0 mL min⁻¹. The results obtained in this study showed that the use of mixed ion-pair reagents is very useful to improve the separation of selenium compounds. The applicability of this technique for the speciation of selenium compounds in real samples was demonstrated by the determination of selenium compounds in a selenium nutritional supplement. The results were found to be in good agreement with those obtained by ion-exchange HPLC-ICP-MS.     

Indirect radiotracer study of the adsorption of corrosion inhibitors on hematite

The specific adsorption of corrosion inhibitors (inorganic and organic compounds) was studied at a metal oxide (hematite) in 0.5 mol dm^–3 NaClO₄ solution by an indirect radiotracer technique. This indirect radiotracer technique is based upon the application of labeled indicator species, which were sulfate species at a concentration of 2×10^–4 mol dm^–3. The displacement of sulfate species was found in all the cases studied. The order of the inhibition efficiency of the corrosion inhibitor molecules is in good agreement with the order of their adsorbabilities. Electronic Publication     

Use of stirred tanks for studying matrix effects caused by inorganic acids,easily ionized elements and organic solvents in inductively coupled plasma atomic emission spectrometry

A stirred tank was used for the first time to elucidate the mechanism responsible for inductively coupled plasma atomic emission spectroscopy (ICP-AES) matrix effects caused by inorganic, acids and easily ionized elements (EIEs), as well as organic, ethanol and acetic acid, compounds. In order to gradually increase the matrix concentration, a matrix solution was introduced inside a stirred container (tank) initially filled with an aqueous multielement standard. PolyTetraFluoroEthylene (PTFE) tubing was used to deliver the resulting solution to the liquid sample introduction system. Matrix concentration ranged from 0 to 2 mol l^− 1 in the case of inorganic acids (i.e., nitric, sulfuric, hydrochloric and a mixture of them), from 0 to about 2500 mg l^− 1 for EIEs (i.e., sodium, calcium and mixtures of both) and from 0% to 15%, w/w for organic compounds. Up to 40–50 different solutions were prepared and measured in a period of time shorter than 6–7 min. This investigation was carried out in terms of emission intensity and tertiary aerosols characteristics. The experimental setup used in the present work allowed to thoroughly study the effect of matrix concentration on analytical signal. Generally speaking, the experiments concerning tertiary aerosol characterization revealed that, in the case of inorganic acids and EIEs, the mechanism responsible for changes in aerosol characteristics was the droplet fission. In contrast, for organic matrices it was found that the interference was caused by a change in both aerosol transport and plasma thermal characteristics. The extent of the interferences caused by organic as well as inorganic compounds was compared for a set of 14 emission lines through a wide range of matrix concentrations. With a stirred tank, it is possible to choose an efficient internal standard for any given matrix composition. The time required to complete this procedure was shorter than 7 min.     

Thermal analysis of the interaction of inorganic pigments with p(nBA/MMA) acrylic emulsion before and after UV ageing

Differential scanning calorimetry (DSC) and thermogravimetry (TG) analyses were used to investigate the influence of inorganic pigments on the photo-oxidative stability of an acrylic emulsion binding medium. For this purpose, three different types of inorganic pigments such as ultramarine blue, cadmium red and hydrated chromium oxide green were selected and mixed with an acrylic emulsion binding medium of poly(n-butyl acrylate/methyl methacrylate). These laboratory mixed paints were analysed before and after UV exposure for different periods of time. In addition, three acrylic commercial paints such as ultramarine blue, cadmium red and chromium oxide green from Liquitex^® and Rembrandt^® companies were also analysed. The results obtained with both thermal techniques suggested that ultramarine blue has the strongest influence on the photo-oxidative stability of the binding medium. A higher increase of the glass transition temperature T _g was observed by DSC analysis on the UV aged binder mixed with ultramarine blue. This result was confirmed by the TG investigations that showed a gradual decrease of the initial temperature of degradation as well as the strongest decrease of the final mass% of the organic compounds. Similar results were measured from the Liquitex^® and Rembrandt^® blue paints.     

Removal of the phosphate group in mechanism-based inhibitors of inositol monophosphatase leads to unusual inhibitory activity

Inositol monophosphatase is widely held to be the therapeutic target for inhibition by lithium ion in the treatment of bipolar disorder. In a continued effort to improve the bioavailability of alternative inhibitors, we have designed and tested two new series of compounds; phosphonates and product-like mimics. Phosphonate substrate mimics were competitive inhibitors of reduced potency as compared to phosphate based inhibitors. Product mimics however, showed various inhibitory modes of action. The 6-butylamino derivative 6p was an uncompetitive inhibitor when acting alone (K(i)= 0.3 mM) but displayed non-competitive inhibition in the presence of inorganic phosphate. This compound represents a new lead in the search for a viable replacement for lithium ion therapy.     

Exploration of Chiral Organic–Inorganic Hybrid Semiconducting Lead Halides

Organic–inorganic lead halides have recently emerged as promising alternatives to conventional optoelectronic materials, considering their intriguing physical properties. However, organic–inorganic lead halides featuring chirality are seldom explored. Here, a pair of enantiomorphic organic–inorganic hybrid semiconducting lead halides, (R‐C₅H₁₄N₂)PbBr₄ ( 1R ) and (S‐C₅H₁₄N₂)PbBr₄ ( 2S ), were successfully obtained with the templating of chiral amines. These compounds adopt distinct one‐dimensional infinite quantum helices formed by edge‐shared transformative lead bromide octahedra. Notably, 1R and 2S present mirror circular dichroism (CD) signals due to the chirality transfer of the enantiopure amines. Furthermore, 1R and 2S exhibit phase‐matchable quadratic nonlinear response and typical semiconducting behaviours. This work highlights the potential of lead halides as a new kind of chiral semiconducting materials in spintronic and chiral optical applications.     

The σ2π4 Triple Bond between Molybdenum and Tungsten Atoms: Developing the Chemistry of an Inorganic Functional Group

Numerous analogies between organic and inorganic chemistry have emerged in recent years. The most prominent example is the isolobal relationship. Many reactions have shown that metal-metal double and triple bonds exhibit a pattern of reactivity similar to that of alkenes and alkynes. In compounds containing a σ²π⁴ triple bond between molybdenum and tungsten atoms, the M? M bond order can be increased from three to four by reductive elimination or decreased from three to two or one by oxidative addition. Complexes with M?M bonds can be used to prepare clusters or can serve as catalysts. In this review relationships between structure (electronic and stereochemical) and reactivity that are characteristic for modern inorganic chemistry are discussed.     

Total and inorganic arsenic in dietary supplements based on herbs, other botanicals and algae—a possible contributor to inorganic arsenic exposure

The content of total and inorganic arsenic was determined in 16 dietary supplements based on herbs, other botanicals and algae purchased on the Danish market. The dietary supplements originated from various regions, including Asia, Europe and USA. The contents of total and inorganic arsenic was determined by inductively coupled plasma mass spectrometry (ICP-MS) and anion exchange HPLC-ICP-MS, respectively, were in the range of 0.58 to 5.0 mgkg^?1 and 0.03 to 3.2 mg?kg^?1, respectively, with a ratio between inorganic arsenic and total arsenic ranging between 5 and 100 %. Consumption of the recommended dose of the individual dietary supplement would lead to an exposure to inorganic arsenic within the range of 0.07 to 13 μg?day^?1. Such exposure from dietary supplements would in worst case constitute 62.4 % of the range of benchmark dose lower confidence limit values (BMDL₀₁ at 0.3 to 8 μg kg bw^?1 kg^?1 day^?1) put down by European Food Safety Authority (EFSA) in 2009, for cancers of the lung, skin and bladder, as well as skin lesions. Hence, the results demonstrate that consumption of certain dietary supplements could contribute significantly to the dietary exposure to inorganic arsenic at levels close to the toxicological limits established by EFSA.     

Computational 1H and 13C NMR in structural and stereochemical studies

Present review outlines the advances and perspectives of computational ¹H and ¹³C NMR applied to the stereochemical studies of inorganic, organic, and bioorganic compounds, involving in particular natural products, carbohydrates, and carbonium ions. The first part of the review briefly outlines theoretical background of the modern computational methods applied to the calculation of chemical shifts and spin–spin coupling constants at the DFT and the non-empirical levels. The second part of the review deals with the achievements of the computational ¹H and ¹³C NMR in the stereochemical investigation of a variety of inorganic, organic, and bioorganic compounds, providing in an abridged form the material partly discussed by the author in a series of parent reviews. Major attention is focused herewith on the publications of the recent years, which were not reviewed elsewhere.