Improved Membranes for Hemodialysis

Asymmetric membranes of cellulose acetate and cellulose acetate modified with pendant amino groups have been evaluated for ultrafiltration and dialysis properties. Ultrafiltration rates from 4 to 30 times that of Cuprophan were obtained. During the ultrafiltration test, up to 89% of inulin in the test solution permeated with the ultrafitrate in contrast to the 14% permeation of inulin through a Cuprophan membrane. In spite of the apparently facile permeation of high molecular weight species (e.g., inulin) through the experimental membranes, human albumin was quantitatively reflected. Dialysis tests indicate that cellulose acetate membranes 38 μ or less in thickness should surpass 23-μ-thick (wet) Cuprophan in purely diffusional transport of blood solutes of low molecular weight.

In addition to their promising ultrafiltration and dialysis properties, membranes made from a blend of cellulose acetate and N,N-diethylaminoethylcellulose acetate were found to sorb heparin strongly. The clotting time of rabbit blood in contact with the heparinized membranes was extended, in some cases indefinitely.     

Studies on cellulose acetate-carboxylated polysulfone blend ultrafiltration membranes--Part I

Hydrophilic polysulfone ultrafiltration (UF) membranes were prepared from blends of cellulose acetate with carboxylated polysulfone of 0.14 degree of carboxylation. The effects of blend polymer composition on compaction, pure water flux, water content and membrane hydraulic resistance (R_m), have been investigated to evaluate the performance of the membranes. The performance of the blend membranes of various blend polymer compositions were compared with that of membranes prepared from pure cellulose acetate and blends of cellulose acetate and pure polysulfone. The hydrophilic cellulose acetate-carboxylated polysulfone blend UF membranes showed better performance compared to membranes prepared from pure cellulose acetate and blends of cellulose acetate and pure polysulfone.     

亲水膜的表面改性及在膜蒸馏中的应用

膜的微孔性和疏水性是水溶液膜蒸馏的两个基本条件,迄今人们均采用疏水性高分子材料制成疏水微孔膜用于膜蒸馏研究。本文采用辐照接枝聚合和等离子体表面聚合的方法,将亲水的醋酸纤维素微孔膜和硝酸纤维素微孔膜表面疏水化改性,成功地用于膜蒸馏研究,大大扩展了疏水微孔膜的材料来源。实验结果表明,亲水膜表面改性得到的疏水膜,其膜蒸馏性能不低于疏水材料制成的膜,尤其是等离子体聚合法可以实现多种特殊单体在多孔的材料表面聚合,成为制备高性能疏水微孔膜的有效手段,为膜蒸馏的深入发展和实用化创造了有利条件。     

On the electrochemical characterization of ion-selective cellulose acetate membranes with and without stigmasterol liquid membranes

Stigmasterol, a plant product, has been used as a surfactant to generate liquid membranes supported on a cellulose acetate matrix. Electrochemical characterization of the membrane has been attempted with a view to simulating its behavior with natural membranes by measuring membrane potentials and membrane conductance. The selectivity of cellulose acetate membrane kept in contact with magnesium chloride solutions of different mean concentrations has been found to change from anion to cation. Transport numbers have been estimated from membrane potential data. Permselectivity and fixed charge density values for the cellulose acetate membrane with and without stigmasterol have been determined from transport numbers. The variation of these parameters with concentration and pH has also been examined.     

Permeation of water as a tool for characterizing the effect of solvent, film thickness and water solubility in cellulose acetate membranes

Cellulose acetate membranes have been used in many applications; of particular interest are reverse osmosis systems, and as a neutral matrix for incorporation of different polymers (e.g., conducting polymers), inorganic ions (e.g., lanthanides) and organic (e.g., pharmaceutical) compounds. The properties of the new polymers derived from cellulose acetate or blends depend on those of cellulose acetate. This work presents an attempt to find links between thermodynamic and kinetic properties of cellulose acetate membranes in equilibrium with water. Water diffusion coefficients in cellulose acetate membranes are reported, measured with a simple water permeation technique. The comparison of these values with the percentage of water uptake and polymer thickness leads to interesting conclusions related with different polymer properties.     

5.6 Cellulose acetate in separation technology

Cellulose acetate has been utilized in a variety of separation and purification processes. In membrane separation, cellulosics, in particular cellulose acetate, have played important roles. Hemodialysis and desalination are the established fields where acetate membranes have been applied. Recently, a new application, that is the purification of drinking water, is growing. The history of cellulosic membranes, preparation of acetate membranes, and applications will be reviewed. Cellulose acetate is also useful in chromatography and related separation technologies. These application will also be reviewed and the relationship between the superstructure of cellulose triacetate and its adsorptive behavior is briefly mentioned.     

Reactions with 1.3 propane sultone for the synthesis of cation-exchange membranes

For several reasons it is interesting for membrane technology to introduce strongly anionic groups in membranes. Therefore the possibilities of 1.3 propane sultone were studied to modify cellulose, cellulose acetate and polyacrylonitrile.The results showed that cellulose and cellulose acetate could be modified by a direct reaction of 1.3 propane sultone with the available hydroxyl groups. The nitrile groups in polyacrylonitrile had to be reacted first with hydrogen sulphide to give reactive thioamide groups, able to react with the sultone. These results give evidence for 1.3 propane sultone being a useful chemical for modification of polymers, its carcinogenic properties will however prevent applications.     

甲苯二异氰酸酯改性醋酸纤维素膜材料

本文研究了用甲苯二异氰酸酯对醋酸纤维素进行改性,以增强高聚物的物理性能和耐菌性能。探讨了反应时间、原料配比、反应温度、催化剂用量及产物分离用的溶剂等因素对合成高聚物材料的影响。对交联后的醋酸纤维素苯基氨基甲酸酯铸成的反渗透膜的水通量、脱盐率、耐水解性和耐微生物的稳定性能的测试表明,经改性的醋酸纤维素膜具有较好的上述性能,是一种良好的膜材料。     

Studies on cellulose acetate and sulfonated poly(ether ether ketone) blend ultrafiltration membranes

New ultrafiltration membranes based on chemically and thermally stable arylene main-chain polymers have been prepared by blending the sulfonated poly(ether ether ketone) with cellulose acetate in various compositions in N,N^′-dimethylformamide as solvent by phase inversion technique. Prepared membranes have been subjected to ultrafiltration characterizations such as compaction, pure water flux, water content, and membrane hydraulic resistance. The pore statistics and molecular weight cut-off (MWCO) of the membranes have been estimated using proteins such as trypsin, pepsin, egg albumin and bovine serum albumin. The pore size increased with increasing concentrations of sulfonated poly(ether ether ketone) in the casting solution. Similarly, the MWCOs of the membranes ranged from 20 to 69 kDa, depending on the various polymer compositions. Surface and cross-sectional morphologies of membranes were analyzed using scanning electron microscopy. The effects of polymer compositions on the above parameters were analyzed and the results are compared and discussed with those of pure cellulose acetate membranes.     

Removal of aromatic compounds in the aqueous solution via micellar enhanced ultrafiltration: Part 1. Behavior of nonionic surfactants

The effects of nonionic surfactants having different hydrophilicity and membranes having different hydrophobicity and molecular weight cut-off on the performance of micellar-enhanced ultrafiltration (MEUF) process were examined. A homologous series of polyethyleneglycol (PEG) alkylether having different numbers of methylene groups and ethylene oxide groups was used for nonionic surfactants. Polysulfone membranes and cellulose acetate membranes having different molecular cut-off were used for hydrophobic membranes and hydrophilic membranes, respectively. The concentration of surfactant added to pure water was fixed at the value of 100 times of critical micelle concentration (CMC). The flux through polysulfone membranes decreased remarkably due to adsorption mainly caused by hydrophobic interactions between surfactant and membrane material. The decline of solution flux for cellulose acetate membranes was not as serious as that for polysulfone membranes because of hydrophilic properties of cellulose acetate membranes. The surfactant rejections for the cellulose acetate membranes increased with decreasing membrane pore size and with increasing the hydrophobicity of surfactant. On the other hand the surfactant rejections for polysulfone membranes showed totally different rejection trends with those for cellulose acetate membranes. The surfactant rejections for the polysulfone membranes depend on the strength of hydrophobic interactions between surfactant and membrane material and molecular weight of surfactants.     

Water in polymer membranes. Part III : Water sorption and pore volume in cellulose acetate films

Changes in waveguide properties of several cellulose acetate membranes and one polyimide membrane were measured as a function of their exposure to varying levels of relative humidity. The volume fraction of water in the films and the occupied pore volumes were determined from refractive index and thickness changes. The dependence of the refractive index on water absorption is related to a competition between two processes: one of filling pores with no film expansion and one of “free expansion” where the film expands to completely accommodate the added water volume. The term “pore” is taken to mean a volume with molecular and not macroscopic dimensions. The hydration properties of these dense cellulose acetate membranes were affected by degree of acetylation, casting temperatures and annealing treatments. Annealing CA398 membranes at 180°C decreased film water concentration by reducing the amount of free expansion. Annealed CA398 membranes that were tested in a reverse osmosis cell were found to have high salt rejection compared to unannealed films. The hydration characteristics of a polyimide membrane are compared to cellulose acetate membranes.     

CHARACTERIZATION OF REGENERATED CELLULOSE MEMBRANES HYDROLYZED FROM CELLULOSE ACETATE

A series of cellulose acetate membranes were prepared by using formamide as additive, and then were hydrolyzedin 4 wt% aqueous NaOH solution for 8 h to obtain regenerated cellulose membranes. The dependence of degree ofsubstitution, structure, porous properties, solubility and thermal stability on hydrolysis time was studied by chemical titration,Fourier transform infrared spectroscopy, scanning electron microscopy, wide-angle X-ray diffraction, and differentialscanning calorimetry, respectively. The results indicated that the pore size of the regenerated cellulose membranes wasslightly smaller than that of cellulose acetate membrane, while solvent-resistance, crystallinity and thermostability weresignificantly improved. This work provides a simple way to prepare the porous cellulose membranes, which not only kept thegood pore characteristics of cellulose acetate membranes, but also possessed solvent-resistance, high crystallinity andthermostability. Therefore, the application range ofcellulose acetate membranes can be expanded.     

Role of membrane surface morphology in colloidal fouling of cellulose acetate and composite aromatic polyamide reverse osmosis membranes

Laboratory-scale colloidal fouling tests, comparing the fouling behavior of cellulose acetate and aromatic polyamide thin-film composite reverse osmosis (RO) membranes, are reported. Fouling of both membranes was studied at identical initial permeation rates so that the effect of the transverse hydrodynamic force (permeation drag) on the fouling of both membranes is comparable. Results showed a significantly higher fouling rate for the thin-film composite membranes compared to that for the cellulose acetate membranes. Addition of an anionic surfactant (sodium dodecyl sulfate, SDS) to mask variations in chemical and electrokinetic surface characteristics of the cellulose acetate and aromatic polyamide membranes resulted in only a small change in the fouling behavior. The higher fouling rate for the thin-film composite membranes is attributed to surface roughness which is inherent in interfacially polymerized aromatic polyamide composite membranes. AFM and SEM images of the two membrane surfaces strongly support this conclusion. These surface images reveal that the thin-film composite membrane exhibits large-scale surface roughness of ridge-and-valley structure, while the cellulose acetate membrane surface is relatively smooth.     

Synthesis, characterization and thermal studies on cellulose acetate membranes with additive

Cellulose acetate (CA) membranes are used in ultrafiltration applications, although they show low chemical, mechanical and thermal resistance. In order to prepare membranes with improved properties, modification of cellulose acetate with polyethelene glycol (PEG 600) has been attempted. In this study, CA has been mixed with PEG 600 as an additive in a polar solvent. The effects of CA composition and additive concentration given by a mixture design of experiments on membrane compaction, pure water flux, water content and membrane hydraulic resistance have been studied and discussed. The efficiency of protein separation by the developed CA membranes have been quantified using model proteins such as pepsin, egg albumin (EA) and bovine serum albumin (BSA). The thermal stability of the developed membranes prepared with PEG 600 additive has also been investigated using thermogravimetric analysis and differential scanning calorimetry.     

Purification of Oily Wastewater by a Dynamic Membrane with a Cellulose Acetyl Surface Layer

Russian Journal of General Chemistry - The surface properties of membranes with a dynamic layer of cellulose acetate have been investigated, and the parameters for the purification of oily...     

A comparison of Tris-glycine and Tris-tricine buffers for the electrophoretic separation of major serum proteins

This paper compares different buffer systems for the electrophoretic separation of the five most abundant serum proteins on native-PAGE gel and cellulose membranes. A modified Tris-tricine system was shown to be superior for the separation of these serum proteins in a 7% m/v native-PAGE gel as compared with the traditionally used Tris-glycine and Tris-tricine methods. This modified Tris-tricine buffer system was also employed for the separation of serum proteins using a cellulose acetate membrane and very effective separation was observed as compared with the traditionally used Tris-barbital and Tris-glycine buffer systems.     

CELLULOSE ACETATE AND EPOXY RESIN BLEND ULTRAFILTRATION MEMBRANES: REPARATION,CHARACTERIZATION, AND APPLICATION

ABSTRACT

Membranes based on cellulose acetate used in ultrafiltration applications lack good, chemical, mechanical and thermal resistance. In order to prepare membranes with improved properties, modification of cellulose acetate with epoxy resin through solution blending was attempted. In the present work, the membrane casting solutions with different polymer blend compositions of cellulose acetate and diglycidyl ether of bisphenol-A (DGEBA) were prepared at 30±2°C. The maximum percent compatibility of the two polymers, cellulose acetate and diglycidyl ether of bisphenol-A, was estimated to be 60/40%. Ultrafiltration blend membranes based on various blend compositions were prepared, characterized in terms of compaction, pure water flux, water content, membrane hydraulic resistance and molecular weight cut-off. The application of these membranes, in rejection of proteins of various molecular weights, are discussed.     

The streaming potential method for the characterization of ultrafiltration organic membranes and the control of cleaning treatments

Streaming potential measurement of ultrafiltration (UF) membranes have been realised a new design. This new design is more convenient to determine the streaming potential on a function of the pressure for all kinds of modules (planar, hollow fiber.h.). The effects of pH, ionic strength and size of pores have been studied. Isoelectric points of different materials (polyethersulfone, celloulse acetate, cellulose triacetate and polysulfone membranes) have been experimentally determined from ν variations with pH at a given ionic are, respectively, 3.1, 4.2, 3.4 and 0.5. The study of the charge organic membranes studied has been shown that adsorbing ions are those of water itself. Then the surface charge of the membrane is a dependent on the pH and at the isoelectric point, the charge density and the streaming potential vanished. The polyethersulfone membrane surface has been modified with TX100 adsorption and the modification observed with our design compared to contact angle and permeabilities measurements. The orientation angle of the surfactant at the membrane surface is obtained: θ=5°, and shows that a flat adsorption occurs. The impact of membranes cleaning procedures have been studied in term of permeability completed by streaming potential measurements. It appeared clearly that streaming potential is a useful tool for the control of cleaning procedures.     

Isoelectric focusing on cellulose acetate membranes: an up-date on materials and methods

The method of isoelectric focusing proteins on cellulose acetate membranes has been improved by the introduction of: (i) plastic-backed membranes, (ii) a commercially available Mini-IEF cell and (iii) sensitive colloidal gold staining. The improved methodology is described with applications for clinical laboratories.