Real structure of SrSi2O2N2

SrSi₂O₂N₂ is an important host lattice for Eu²⁺ doped phosphors. Its crystal structure (space group P1, a = 7.0802(2) Å, b = 7.2306(2) Å, c = 7.2554(2) Å, α = 88.767(3)°, β = 84.733(2)°, γ = 75.905(2)° and V = 358.73(2) Å³, Z = 4) is isotypic with EuSi₂O₂N₂: highly condensed silicate layers are separated by Sr²⁺. The samples are characterized by pronounced real structure effects owing to pseudosymmetry of partial structures. Polysynthetic twinning with domains of various sizes is ubiquitous and oriented intergrowth of domains with different orientations has also been observed and analysed in detail by means of electron diffraction and high-resolution electron microscopy. These effects also affect the X-ray powder pattern and were taken into account in a Rietveld refinement.     

Spectral and physico-chemical investigations of novel homo-dinuclear di-μ2-alkoxo bridged Schiff base complexes: 57Fe Mössbauer parameters of the Fe(III) complex

Spectral and molecular model computations on homo-dinuclear complexes [M₂L₂(H₂O)₂Cl₂] [L = 1-(salicylaldeneamino)-3-hydroxypropane, M = Cr³⁺, Mn³⁺, Fe³⁺, Co³⁺, Ni³⁺ or Cu³⁺] are consistent with a distorted hexa-coordinate geometry. X-band EPR spectral data indicated a rhombic distortion around Cu(II) ion. Magnetic moment and ⁵⁷Fe Mössbauer data confirmed a high-spin state electronic configuration (t_2g³e_g², S = 5/2) and asymmetric ligand environment around Fe(III) with nuclear transitions Fe(±3/2 → 1/2) exhibiting Kramer's double degeneracy. The neighboring Fe(III) nuclei in the homo-dinuclear species are antiferromagnetically coupled.     

Amberlite XAD-7 resin impregnated with 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol for enrichment of metal ions

The Amberlite XAD-7 resin modification was carried out by loading 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol (CPDPINP). Subsequently, this new sorbent was applied for the enrichment of metal ions such as Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions. The effect of various parameters on their sorption and following recoveries was studied in column procedure. The preconcentrated ions were eluted by appropriate eluent and their contents were quantified by FAAS. This method has preconcentration factor of 150 and enrichment factor in the range of 20.8–29.1. At optimum values of all variables, the proposed method has linear calibration graphs in the range of 0.01 up to 0.29 μg mL⁻¹ with detection limit (3SDb/m, n = 15) between 1.6 and 2.6 ng mL⁻¹. This protocol is usable for successful analysis of Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions in different matrices with reasonable recoveries (>93%) and acceptable relative standard deviation (<4.7%).     

Synthesis,characterization and properties of microporous lanthanide silicates: K8Ln3Si12O32NO3·H2O (Ln = Eu,Tb, Gd,Sm)

A family of microporous lanthanide silicates, K₈Ln₃Si₁₂O₃₂NO₃·H₂O (denoted LnSiO-CJ3, Ln = Eu, Tb, Gd, Sm), was synthesized under mild hydrothermal conditions at 503 K. The X-ray powder diffraction patterns of these compounds reveal that they are isostructural. The structure of EuSiO-CJ3 was determined by single-crystal X-ray diffraction analysis. It crystallizes in triclinic space group P-1 (No. 2) with a = 11.599(2) Å, b = 12.225(2) Å, c = 13.829(3) Å, α = 112.99(3)°, β = 92.05(3)°, γ = 90.57(3)°. The structure is based on [Si₃O₈]_n^4n? layers with 6-, 8-, 12-rings that are connected by EuO₆ octahedra to form a 3-D framework with 8-ring channels along the [001] direction. Charge neutrality is achieved by the K⁺ and NO₃^? ions located in the channels. The framework of EuSiO-CJ3 shows good thermal stability, which can be stable up to 1273 K. Ion-exchange capacity of EuSiO-CJ3 was investigated by the exchange of NO₃^? ions with halide ions (F^?, Cl^?, Br^?). The peaks in the emission spectra of LnSiO-CJ3 (Ln = Eu, Tb) belong to the characteristic transitions of Ln³⁺ (Ln = Eu, Tb) respectively. The lifetime measurements of LnSiO-CJ3 (Ln = Eu, Tb) suggest the presence of three Ln³⁺ (Ln = Eu, Tb) environments, which are consistent with the crystallographic results.     

Electrochemical and magnetic properties of inorganic polymers constructed from Mn(II)/Co(II)-substituted heteropolymolybdates

Two inorganic polymers constructed from transition metal-substituted heteropolymolybdates, [(CH₃)₃NH]_5n[PMo₁₁MO₃₉]_n·xH₂O (M = Mn²⁺, x = n (1); M = Co²⁺, x = 2n (2)), have been synthesized in aqueous solutions and characterized by IR, TGA, and single-crystal X-ray diffraction analysis. Crystal data: 1, monoclinic, C2/c, a = 17.1322(7) Å, b = 17.6062(7) Å, c = 17.6459(7) Å, β = 103.2220(10)°, V = 5181.5(4) Å³ and Z = 4; 2, triclinic, P-1, a = 12.1986(7) Å, b = 13.0973(7) Å, c = 16.7736(9) Å, α = 97.1810(10)°, β = 98.5040(11)°, γ = 96.3920(10)°, V = 2606.5(2) Å³ and Z = 2. The cyclic voltammograms of 1 and 2 show irreversible redox peaks in DMF solution and there are three reversible couples after addition of 0.1 M H₂SO₄ aqueous solutions. The cyclic voltammograms of 1/2-modified carbon paste electrode (1-CPE/2-CPE) show two consecutive reversible two-electron redox processes. Especially, 2-CPE shows good electrocatalytic activity toward the reduction of nitrite and hydrogen peroxide. The magnetic properties of the two complexes have also been investigated.     

Synthesis and structure of a bimetallic hybrid inorganic/organic layered coordination polymer with an octamolybdate cluster variant trapped between the α and δ isomeric forms

Hydrothermal combination of CuSO₄, MoO₃, and 4-phenylpyridine (4-phpyr) in a 1:4:4.5 ratio under basic conditions afforded purple crystals of {[Cu(4-phpyr)₄]₂(Mo₈O₂₆)·4-phpyr} (1), which were analyzed by spectroscopy and single crystal X-ray diffraction. The asymmetric octamolybdate clusters in 1 adopt an intermediate structural variant between the known α and δ isomeric forms, with four octahedral and three tetrahedral molybdenum coordination spheres, along with one molybdenum atom in a highly distorted square pyramidal environment. Paddle-wheel shaped [Cu(4-phpyr)₄]²⁺ cations link adjacent {α/δ-Mo₈O₂₆}⁴⁻ clusters into a 2-D layered rhomboid grid coordination polymer. Uncoordinated 4-phpyr molecules lie in incipient voids in the interlamellar regions. The structure of 1 illustrates the utility of sterically bulky coordination complexes in the stabilization of intermediate conformations during energetically facile polyoxometallate isomer interconversion. Crystallographic data: triclinic, P1, a = 13.717(3) Å, b = 13.728(3) Å, c = 14.809(3) Å, α = 109.251(4)°, β = 107.670(4)°, γ = 92.005(4)°, V = 2480.0(9) Å³, R₁ = 0.0637, wR₂ = 0.1054.     

Synthesis and crystal structure of the first chain-type nitridosilicates RE5Si3N9 (RE = La,Ce)

The novel branched chain-type nitridosilicates Ce₅Si₃N₉ and La₅Si₃N₉ have been synthesized in a radio-frequency furnace starting from the respective metals and silicon diimide Si(NH)₂ at 1625 °C for La₅Si₃N₉ and 1650 °C for Ce₅Si₃N₉, respectively. The structure of Ce₅Si₃N₉ has been determined by single-crystal X-ray diffraction (Ce₅Si₃N₉, Cmca (no. 64), a = 10.567(2) Å, b = 11.329(2) Å, c = 15.865(3) Å, V = 1899.3 Å³, Z = 8, R₁ = 0.0391, 1480 independent reflections, 90 refined parameters). The structure of isotypic La₅Si₃N₉ has been refined by the Rietveld method, starting from single-crystal data of Ce₅Si₃N₉ (La₅Si₃N₉, Cmca (no. 64), a = 10.647(4) Å, b = 11.414(4) Å, c = 16.030(5) Å, V = 1948.1 Å³, Z = 8, R_P = 0.0348, R_F² = 0.0533). Both compounds are built up of alternating Q²- and Q³-type corner sharing SiN₄ tetrahedra with additional corner sharing Q¹-units attached to the Q³-tetrahedra pointing alternately in opposing directions. These zipper-like chains are intertwined in both directions perpendicular to the chain itself to form a three-dimensionally interlocked structure with the rare-earth ions situated between the chains. Magnetic measurements resulted in a ferromagnetic ground state with a magnetic moment in agreement with Ce³⁺.     

Synthesis,structure, and characterization of a new two-dimensional lead(II) vanadate,Ba3PbV4O14

A new two-dimensional lead(II) vanadate, Ba₃PbV₄O₁₄ has been synthesized by standard solid state techniques using BaCO₃, PbO, and V₂O₅ as reagents. The structure of Ba₃PbV₄O₁₄ was determined by single-crystal X-ray diffraction. Ba₃PbV₄O₁₄ crystallizes in the triclinic space group P-1 (no. 2), with a = 7.2997(15) (Å), b = 7.2932(15) (Å), c = 13.379(3) (Å), α = 93.68(3)°, β = 99.68(3)°, γ = 91.49(3)°, V = 700.2(2) (ų) and Z = 2. Ba₃PbV₄O₁₄ exhibits a novel two-dimensional layered structure consisting of corner shared VO₄ tetrahedra that are linked by edge shared PbO₇ polyhedra, in which the Ba²⁺ cations occupy the interlayer region. The Pb²⁺ cations are in asymmetric coordination environments attributable to its lone pair. Infrared, Raman, and UV–vis diffuse reflectance spectroscopy, thermogravimetric analysis, and dipole moment calculations are also presented.     

Complex formation between manganese(II), cobalt(II), nickel(II), copper(II) and a series of new ligands derived from N,N′-O-phenylenebis(salicylideneimine)

A series of new ligands derived from N,N′-O-phenylenebis(salicylideneimine) have been synthesized and characterized by spectrometric methods. Their protonation constants and the stability constants of their complexes with Mn²⁺, Co²⁺, Ni²⁺ et Cu²⁺ have been determined by potentiometric methods in a water–ethanol (90:10 v/v) mixture at a 0.2 mol l⁻¹ ionic strength (NaCl) and at 25.0 ± 0.1 °C. The Sirko program was used to determine the protonation constants as well as the binding constants of both species [M(HL)]⁺ and [ML]. The stability order obtained is in agreement with Irving–Williams series.     

Thermodynamic studies on complexation of divalent transition metal ions with some zwitterionic buffers for biochemical and physiological research

The interaction between the zwitterionic buffers (3-[N-bis(2-hydroxyethyl)amino]-2-hydroxy propane sulfonic acid, N-(2-actamido)-2-aminoethane sulfonic acid, and 3-[(1,1-dimethyl-2-hydroxyethyl)amino]-2-hydroxy propane sulfonic acid) with some divalent transition metal ions (Cu^II, Ni^II, Co^II, Zn^II, and Mn^II) were studied at different temperatures (298.15 to 328.15) K at ionic strength I = 0.1 mol · dm⁻³ NaNO₃ and in the presence of 10%, 30%, and 50% (w/w) dioxene by using potentiometry. The thermodynamic stability constants were calculated as well as the free energy change for the 1:1 binary complexation. The protonation constants of the zwitterionic buffers were also determined potentiometrically under the above conditions.     

Copper and cadmium phosphonates based on 2-quinolinephosphonate

Hydrothermal reactions of 2-quinolinephosphonic acid (1) and CuSO₄ or CdSO₄ result in two new compounds with formula Cu(2-C₉H₆NPO₃) (2) and Cd(2-C₉H₆NPO₃)(H₂O) (3). Compound 2 has a layer structure in which dimers of edge-sharing {CuO₄N} square-pyramids are linked by {CPO₃} tetrahedra through corner sharing. Compound 3 shows a new type of layer structure where chains of corner sharing {CdO₅N} octahedra are connected by {CPO₃} tetrahedra into an inorganic layer. The quinoline groups fill in the inter-layer spaces in both cases. Crystal data for 1: monoclinic, space group P2₁/c, a = 10.270(2) Å, b = 13.566(3) Å, c = 6.9818(16) Å, β = 101.916(4)°, V = 951.8(4) Å³, Z = 4. For 2: monoclinic, space group P2₁/c, a = 13.976(3) Å, b = 7.9398(18) Å, c = 7.8687(18) Å, β = 101.150(5)°, V = 856.7(3) Å³, Z = 4. For 3: monoclinic, space group P2₁/c, a = 17.164(4) Å, b = 5.4870(12) Å, c = 10.850(2) Å, β = 101.557(4)°, V = 1001.1(4) Å³, Z = 4. The magnetic measurement on 2 reveals a dominant antiferromagnetic exchange coupling between the Cu(II) centers. A quasi-reversible electrochemical reaction is observed for complex 2 immobilized on the surface of GC electrode, corresponding to the redox couple Cu²⁺/Cu⁺. The fluorescent properties of 1–3 are also investigated.     

Vibrational spectroscopic study of syngenite formed during the treatment of liquid manure with sulphuric acid

Syngenite (K₂Ca(SO₄)₂·H₂O), formed during treatment of manure with sulphuric acid, was studied by infrared, near-infrared (NIR) and Raman spectroscopy. C_s site symmetry was determined for the two sulphate groups in syngenite (P2₁/m), so all bands are both infrared and Raman active. The split ν₁ (two Raman+two infrared bands) was observed at 981 and 1000 cm⁻¹. The split ν₂ (four Raman+four infrared bands) was observed in the Raman spectrum at 424, 441, 471 and 491 cm⁻¹. In the infrared spectrum, only one band was observed at 439 cm⁻¹. From the split ν₃ (six Raman+six infrared) bands three 298 K Raman bands were observed at 1117, 1138 and 1166 cm⁻¹. Cooling to 77 K resulted in four bands at 1119, 1136, 1144 and 1167 cm⁻¹. In the infrared spectrum, five bands were observed at 1110, 1125, 1136, 1148 and 1193 cm⁻¹. From the split ν₄ (six infrared+six Raman bands) four bands were observed in the infrared spectrum at 604, 617, 644 and 657 cm⁻¹. The 298 K Raman spectrum showed one band at 641 cm⁻¹, while at 77 K four bands were observed at 607, 621, 634 and 643 cm⁻¹. Crystal water is observed in the infrared spectrum by the OH-liberation mode at 754 cm⁻¹, OH-bending mode at 1631 cm⁻¹, OH-stretching modes at 3248 (symmetric) and 3377 cm⁻¹ (antisymmetric) and a combination band at 3510 cm⁻¹ of the H-bonded OH-mode plus the OH-stretching mode. The near-infrared spectrum gave information about the crystal water resulting in overtone and combination bands of OH-liberation, OH-bending and OH-stretching modes.     

Two novel Keggin tungstocobaltates grafted by cobaltII complex group(s): K[Co(phen)2(H2O)]2[HCoW12O40]·2H2O and [Co(2,2′-bipy)3]1.5{[Co(2,2′-bipy)2(H2O)][HCoW12O40]}·0.5H2O

Two novel inorganic–organic hybrid compounds composed of Keggin tungstocobaltate framework and cobalt(II)–N coordination complexes, K[Co(phen)₂(H₂O)]₂[HCoW₁₂O₄₀]·2H₂O (1) (phen = 1,10-phenanthroline) and [Co(2,2′-bipy)₃]_1.5{[Co(2,2′-bipy)₂(H₂O)][HCoW₁₂O₄₀]·0.5H₂O (2) (bipy = bipyridine), have been synthesized under hydrothermal conditions by directly using Keggin POMs as starting materials, which were characterized by elemental analyses, IR, TG analyses and X-ray single crystal diffraction. Crystal data for compound 1: C₄₈H₄₁Co₃KN₈O₄₄W_12, triclinic, space group P-1, a = 10.918(5) Å, b = 13.401(5) Å, c = 13.693(5) Å, α = 69.291(5)°, β = 71.568(5)°, γ = 78.421(5)°, V = 1768.9(12) Å³, Z = 1; for compound 2: C₁₃₀H₁₀₄Co₇N₂₆O₈₃W_24, orthorhombic, space group, C2/c, a = 46.839(9) Å, b = 14.347(3) Å, c = 26.147(5) Å, α = β = γ = 90°, V = 17,570(6) Å³, Z = 4. Compound 1 exhibits a pseudo-1D chainlike structure, in which potassium ions act as linkages of Keggin unit doubly grafted by [Co(phen)₂(H₂O)] complex. Compound 2 represents a [Co(2,2′-bipy)₂(H₂O)]²⁺ mono-grafted Keggin tungstocobaltate derivative with 1.5[Co(2,2′-bipy)₃]²⁺ countercations. The cyclic voltammetric behavior of 1-CPE is similar to the parent 3-CPE, but the cyclic voltammetric behavior of Co^II shows a little difference. Variable-temperature magnetic susceptibility measurement of compound 1 demonstrates the presence of antiferromagnetic interactions.     

A new intersecting tunnel structure in the AIMIII[PO3(OH)]2 series for AI = Ag,MIII = In: Analysis of structural relationships

A new indium hydroxyphosphate containing silver, AgIn[PO₃(OH)]₂, has been synthesized using hydrothermal method. It crystallizes in the P2₁/c space group with the cell parameters a = 6.6400(2) Å, b = 14.6269(6) Å, c = 6.6616(4) Å, β = 95.681(5)°, V = 643.82(6) Å³, Z = 4. Its three-dimensional framework, built up of corner-sharing PO₃(OH) tetrahedra and InO₆ octahedra, presents intersecting tunnels running along <111> and [100] directions, in which the Ag⁺ cations are located. The presence of hydroxyl groups has been confirmed from IR spectroscopy studies and hydrogen atoms were located from the single crystal X-ray diffraction study. The structural relationships with the other compounds of general formula A^IM^III[PO₃(OH)]₂ are analyzed.     

Structural variations and cation distributions in Mn3−xCoxO4 (0 ≤ x ≤ 3) dense ceramics using neutron diffraction data

Single phase ceramics of cobalt manganese oxide spinels Mn_3?xCo_xO₄ were structurally characterized by neutron powder diffraction over the whole solid solution range. For x < 1.75, ceramics obtained at room temperature by conventional sintering techniques are tetragonal, while for x ≥ 1.75 ceramics sintered by Spark Plasma Sintering are of cubic symmetry. The unit cells, metal–metal and metal–oxygen average bonds decrease regularly with increasing cobalt content. Rietveld refinements using neutron data show that cobalt is first preferentially substituted on the tetrahedral site for x < 1, then on the octahedral site for increasing x values. Structural methods (bond valence sum computations and calculations based on Poix's work in oxide spinels) applied to our ceramics using element repartitions and [M–O] distances determined after neutron data refinements allowed us to specify the cation distributions in all phases. Mn²⁺ and/or Co²⁺ occupy the tetrahedral site while Mn³⁺, Co²⁺, Co^III (cobalt in low-spin state) and Mn⁴⁺ occupy the octahedral site. The electronic conduction mechanisms in our highly densified ceramics of pure cobalt and manganese oxide spinels are explained by the hopping of polarons between adjacent Mn³⁺/Mn⁴⁺ and Co²⁺/Co^III on the octahedral sites.     

Coupled chemoenzymatic transfer hydrogenation catalysis for enantioselective reduction and oxidation reactions

Stereoselective reductions of prochiral ketones were performed using a new thermophilic, NAD-dependent alcohol dehydrogenase from Thermus sp. (TADH). The enzyme was produced on 2L-scale from recombinant Escherichia coli and purified by a simple, one-step heat treatment procedure yielding 220 mg of pure enzyme. Regeneration of NADH was catalyzed by the organometallic complex [Cp*Rh(bpy)(H₂O)]²⁺ using formate as a reducing agent. The catalytic performance of [Cp*Rh(bpy)(H₂O)]²⁺ in terms of total number of catalytic cycles and number of catalytic cycles per hour achieved herein (up to 1500 and more than 400 h⁻¹, respectively), are the highest reported for a non-enzymatic nicotinamide regeneration system so far. Chemoenzymatic reduction reactions in a two liquid phase setup were performed on a gramme-scale, for example, 1.3 g of enantiopure (1S,3S)-3-methylcyclohexanol was obtained after purification. The volumetric productivity reached up to 3.9 mM h⁻¹ with an average of 2.6 mM h⁻¹ (5.3 g L⁻¹ d⁻¹) over 10 h. In addition, chemoenzymatic oxidations utilizing the same catalyst set and molecular oxygen as a terminal electron acceptor were performed. Thus, the preparative value of chemoenzymatic transfer hydrogenations with [Cp*Rh(bpy)(H₂O)]²⁺ as a regeneration catalyst coupled especially to thermophilic ADHs was demonstrated.     

New iodate materials as potential laser matrices. Preparation and characterisation of α-M(IO3)3 (M = Y,Dy) and β-M(IO3)3 (M = Y,Ce, Pr,Nd, Eu,Gd, Tb,Dy, Ho,Er). Structural evolution as a function of the Ln3+ cationic radius

Anhydrous yttrium iodate presents polymorphism; two crystalline phases are obtained under hydrothermal conditions. α-Y(IO₃)₃ crystallises in the monoclinic space-group P2₁/c with a three-dimensional structure, whereas β-Y(IO₃)₃ crystallises in the monoclinic space-group P2₁/n with a two-dimensional structure. The lattice parameters are a = 7.038(1) Å, b = 8.466(1) Å, c = 13.317(1) Å, β = 99.65(1)°, V = 782.3(2) Å³, Z = 4 for α-Y(IO₃)₃ and a = 8.685(1) Å, b = 5.964(1) Å, c = 14.958(1) Å, β = 96.99(2)°, V = 769.0(2) Å³, Z = 4 for β-Y(IO₃)₃. The α-form is isostructural with α-Dy(IO₃)₃ studied in this work and α-Ln(IO₃)₃ (Ln = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Ho, Er, Tm, Yb, and Lu) already studied. The β-form is isostructural with β-Ln(IO₃)₃ (Ln = Ce, Pr, Nd, Eu, Gd, Tb, Dy, Ho and Er) studied in this work. The structural evolutions as a function of the Ln³⁺ cationic radius are studied. α-Y(IO₃)₃ and β-Y(IO₃)₃ present good thermal stability since they decompose at 600 °C. They are transparent up to 11.5 μm and they have good optical damage thresholds on powder.     

Structure elucidation of BaSi2O2N2 – A host lattice for rare-earth doped luminescent materials in phosphor-converted (pc)-LEDs

BaSi₂O₂N₂ is a promising host lattice for rare-earth doped luminescent materials in phosphor-converted (pc)-LEDs. Applying a combined approach, its orthorhombic average structure (space group Cmcm (no. 63), a = 14.3902(3) Å, b = 5.3433(1) Å, c = 4.83256(7) Å and V = 371.58(2) Å³, Z = 4) has been elucidated by electron diffraction and structure solution from X-ray and neutron powder diffraction data with subsequent Rietveld refinement (wRp = 0.0491 for X-ray data). The structure contains layers of highly condensed SiON₃ tetrahedra with O terminally bound to Si. The Ba²⁺ ions are situated between the layers and are surrounded by a cuboid of O atoms capped by two N atoms. In the structure, there is only one Ba site and one Si site, respectively, which is in accordance with a single sharp ²⁹Si NMR signal observed at ?52.8 ppm typical for SiON₃ tetrahedra in MSi₂O₂N₂ type oxonitridosilicates. Lattice energy calculations support the results of the structure determination.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Enhancement of electrochemical performance and thermal compatibility of GdBaCo2/3Fe2/3Cu2/3O5+δ cathode on Ce1.9Gd0.1O1.95 electrolyte for IT-SOFCs

Transition-metal doped double-perovskite structure oxides GdBaCo_2/3Fe_2/3Ni_2/3O_5+δ (FN-GBCO), GdBaCo_2/3Fe_2/3Cu_2/3O_5+δ (FC-GBCO), GdBaCoCuO_5+δ (C-GBCO) and pristine GdBaCo₂O_5+δ (GBCO) were synthesized via a citrate combustion method. The thermal-expansion coefficient (TEC) and electrochemical performance of the oxides were investigated as potential cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The TEC exhibited by the FC-GBCO cathode up to 900 °C is 14.6 × 10^?6 °C^?1, which is lower than the value of GBCO (19.9 × 10^?6 °C^?1). Area specific resistances (ASR) of 0.165 Ω cm² at 700 °C and 0.048 Ω cm² at 750 °C were achieved for the FC-GBCO cathode on a Ce_0.9Gd_0.1O_1.95 (CGO) electrolyte. An electrolyte supported (300 μm thick) single-cell configuration of FC-GBCO/CGO/Ni-CGO attained a maximum power density of 435 mW cm^?2 at 700 °C. The unique composition of GBCO co-doped with Fe and Cu ions in the Co sites exhibited reduced TEC and enhancement of electrochemical performance and good chemical compatibility with CGO, and this composition is proving to be a potential cathode for IT-SOFCs.