Preparation of Cu nanoparticles with controlled particle size and distribution via reaction temperature and sonication

This paper presents metallic copper nanoparticles (CuNPs) that differ according to the process parameters used, such as bath temperature and sonication. The effect of different reactions on the size and distribution of CuNPs that had been formed in ethylene glycol solvent were characterized by the X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses after extraction from the solvent. The optimal dimensional properties, including size, distribution, and agglomeration, of CuNPs were determined by controlling the reaction temperature. On the other hand, the mechanically induced sonication process enhances the formation of the selective CuNPs because of the many homogeneous interactions among precursors, reducing agents, and capping agents related to the nucleation and growth of CuNPs. The mechanics of the origin of the diverse CuNPs of different size and distribution are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Influence of dose on particle size of colloidal silver nanoparticles synthesized by gamma radiation

Colloidal silver nanoparticles were synthesized by γ-irradiation-induced reduction method of an aqueous solution containing silver nitrate as a precursor in various concentrations between 7.40×10^?4 and 1.84×10^?3 M, polyvinyl pyrrolidone for capping colloidal nanoparticles, isopropanol as radical scavenger of hydroxyl radicals and deionised water as a solvent. The irradiations were carried out in a ⁶⁰Co γ source chamber at doses up to 70 kGy. The optical absorption spectra were measured using UV–vis spectrophotometer and used to study the particle distribution and electronic structure of silver nanoparticles. As the radiation dose increases from 10 to 70 kGy, the absorption intensity increases with increasing dose. The absorption peak λ_max blue shifted from 410 to 403 nm correspond to the increase of absorption conduction electron energy from 3.02 to 3.08 eV, indicating the particle size decreases with increasing dose. The particle size was determined by photon cross correlation spectroscopy and the results showed that the particle diameter decreases exponentially with the increase of dose. The transmission electron microscopy images were taken at doses of 20 and 60 kGy and the results confirmed that as the dose increases the diameter of colloidal silver nanoparticle decreases and the particle distribution increases.     

Environmentally sensitive silver nanoparticles of controlled size synthesized with PNIPAM as a nucleating and capping agent

Metal nanoparticles combined with environmentally sensitive polymers can lead to enhanced nanometer-sized switches. We present a silver nanoparticle synthesis method that uses poly(N-isopropylacrylamide) (PNIPAM) as the nucleating, capping, and stabilizing agent. The synthesis is performed at room temperature by sodium borohydride-mediated reduction of silver nitrate in the presence of a fully hydrated polymer. The resulting metal nanoparticles have a narrow size distribution comparable to or better than those achieved with other synthesis methods. The silver particles can be thermally precipitated by the collapse of the PNIPAM shell and resolubilized with fast response times, as shown by surface plasmon spectroscopy. The silver-PNIPAM composite allows for combined surface plasmon and thermal switching applications.     

Thermal study of boehmite nanofibers with controlled particle size

Boehmite nanofiber materials with controlled particle size were synthesized without any surfactant by careful tuning of the hydrothermal temperatures, and followed by a series of characterizations. It was found that the boehmite nanofibers became shorter and coarser with the increase of temperature, and resulted in a gradual decrease of their specific surface areas. Moreover, the thermal stability of the boehmite nanofibers was studied by in situ HT X-ray diffraction and thermogravimetry–differential scanning calorimetry. All materials showed the phase transition from γ-Al₂O₃ to other forms. Yet the transition temperature was increased with the increase of hydrothermal temperature. The boehmite nanofibers with the largest diameter showed the best thermal stability.     

Prediction of silver nanoparticles size synthesized in microemulsion system

Nanoparticle synthesis within the aqueous cores of water-in-oil reverse micelle systems is a viable method, which allows control over the size and shape of the particles. The intermicellar exchange rate is affected by the bulk solvent type, the contents dissolved within the core, and the size of the reverse micelle or the water content, referred to as the W value, where W is the molar ratio of the water to surfactant concentrations. In this study a soft sphere model was used to predict ultimate silver nanoparticle particle sizes obtained in AOT reverse micelle. In this model a total interaction energy is implemented to represent the attractive van der Waals forces acting between the metallic particles and the repulsive osmotic and elastic forces, which result from the surfactant tail-tail and solven-tail interactions responsible for the steric stabilization of the metallic particles within the microemulsion. Result from the model accurately predicts the ultimate silver nanoparticle sizes.     

Preparation of antibacterial polyimide films containing silver nanoparticles

Polyimide/silver composite films were successfully prepared by in situ polymerization. A precursor, AgNO₃ was used as the source of the silver nanoparticles. The structure and morphology of resulting films were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Consequently, the silver nanoparticles were well dispersed in polyimide matrix. Meanwhile, thermal properties from thermal gravimetric analyses (TGA) and mechanical properties from tensile test which confirmed composites were kept good performance as compared to pure polyimide. In addition, the antimicrobial activity of polyimide/silver composite films against three different bacteria, B. subtilis, S. aureus, and E. coil, illustrated excellent activity. This composite is potential useful as antimicrobial material with good thermal performance in a wide variety of biomedical and general use applications.     

Preparation of silver nanoparticles in liquid crystalline systems

Silver nanoparticles preparation and the aggregation stability of the particles was investigated in lamellar liquid crystalline systems. A liquid crystal of HDTABr/pentanol/water was first prepared. The water content was next increased while keeping the mass ratio of HDTABr and pentanol constant. Silver nanoparticles were produced by replacing the aqueous phase by Ag sols of various concentrations (0.5–5×10^–3 mol/l) or by an in situ preparation method, i.e., interlamellar reduction of Ag⁺ ions in the liquid crystalline phase. The stability of the silver nanoparticles was monitored by UV-VIS spectroscopy and TEM. The particle size ranged from 5 to 44 nm. The kinetic of silver nanoparticle aggregation was investigated. The effect of nanoparticles on structural ordering in liquid crystals was studied by XRD measurements and it was established that the lamellar distance (d_L) was only slightly altered. Electronic Publication     

溶剂热法制备银纳米晶

以聚乙烯吡咯烷酮(PVP)作为表面活性剂,利用乙二醇溶剂热法成功制备了银纳米颗粒;利用场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)分析了样品的形貌和晶体结构,并考察了溶剂组成等因素对银纳米颗粒形貌的影响.研究结果表明所得银纳米晶粒径均一,直径约为90nm;增大PVP的加入量会降低产物的粒径,溶剂中水的引入会影响银纳米晶的形貌.     

Biomimetic synthesis of silver nanoparticles by Citrus limon (lemon) aqueous extract and theoretical prediction of particle size

In the present study, silver nanoparticles were rapidly synthesized at room temperature by treating silver ions with the Citrus limon (lemon) extract. The effect of various process parameters like the reductant concentration, mixing ratio of the reactants and the concentration of silver nitrate were studied in detail. In the standardized process, 10^?2 M silver nitrate solution was interacted for 4 h with lemon juice (2% citric acid concentration and 0.5% ascorbic acid concentration) in the ratio of 1:4 (vol:vol). The formation of silver nanoparticles was confirmed by Surface Plasmon Resonance as determined by UV–Visible spectra in the range of 400–500 nm. X-ray diffraction analysis revealed the distinctive facets (1 1 1, 2 0 0, 2 2 0, 2 2 2 and 3 1 1 planes) of silver nanoparticles. We found that citric acid was the principal reducing agent for the nanosynthesis process. FT-IR spectral studies demonstrated citric acid as the probable stabilizing agent. Silver nanoparticles below 50 nm with spherical and spheroidal shape were observed from transmission electron microscopy. The correlation between absorption maxima and particle sizes were derived for different UV–Visible absorption maxima (corresponding to different citric acid concentrations) employing “MiePlot v. 3.4”. The theoretical particle size corresponding to 2% citric acid concentration was compared to those obtained by various experimental techniques like X-ray diffraction analysis, atomic force microscopy, and transmission electron microscopy.     

Tuning properties of silver particle monolayers via controlled adsorption-desorption processes

Nanoparticle self-assembly at fluid-fluid interfaces has been traditionally exploited in emulsification, encapsulation and oil recovery, and more recently in emerging applications including functional nanomaterials and biphasic catalysis. We provide a review of the literature focusing on the open challenges that still hamper the broader applicability of this potentially transformative technology, and we outline strategies to achieve improved control over interfacial self-assembly of nanoparticles. First, we discuss means to promote spontaneous adsorption by tuning the interfacial energies of the nanoparticles with the fluids using capping ligands, and the occurrence of energy barriers. We then examine the interactions between interfacial nanoparticles and how they affect the formation of equilibrium interfacial suspensions versus non-equilibrium two-dimensional phases, such as weakly attractive glasses and gels. Important differences with colloidal interactions in a bulk suspension arise due to the discontinuity in solvent properties at the interface. For instance, ligand brushes rearrange in asymmetric configurations, and thus play a significant role in determining interparticle interactions. Finally, we briefly discuss the link between interfacial microstructure and the dynamic response of particle-laden interfaces, including interfacial rheology and the fate of nanoparticle monolayers upon out-of-plane deformation.     

Preparation of mesoporous cadmium sulfide nanoparticles with moderate pore size

The preparation of cadmium sulfide nanoparticles that have a moderate pore size is reported. This preparation method involves a hydrothermal process that produces a precursor mixture and a following acid treatment of the precursor to get the porous material. The majority of the particles have a pore size close to 20 nm, which complements and fills in the gap between the existing cadmium sulfide materials, which usually have a pore size either less than 10 nm or are well above 100 nm.     

Particle size distributions of silver nanoparticles at environmentally relevant conditions

Silver nanoparticles (Ag NPs) are becoming increasingly popular as antimicrobial agents in consumer goods with consequent risk to environmental health from discharges. Environmentally relevant fate and transport investigations are limited but essential to gain understanding towards bioavailability and toxicology. In this study, monodisperse 15 nm citrate-stabilised Ag NPs were synthesised, characterised and then fractionated by flow field-flow fractionation (FlFFF) at environmentally relevant conditions (pH 5 or 8, presence of natural organic macromolecules (NOM) and presence of sodium or calcium). At low ionic strength, Ag NPs particle size increased as pH increased from 5 to 8. However, changing the ionic strength from 10⁻³ to 10⁻² M Na increased instability of the Ag NPs, and loss of peak at pH 5 but in the presence of humic substance (HS), a reduction in NP size was seen, most likely due to a reduction in the diffuse layer. The presence of Ca²⁺ ions, at the higher ionic strengths caused complete loss of the solution Ag NPs with or without HS, most likely due to aggregation. At the lower Ca²⁺ ionic strength the Ag NPs were still unstable, but again, in the presence of HS the NPs were largely dispersed. The presence of HS improved stability of Ag NPs under these conditions by forming a surface coating resulting in both steric and charge stabilisation. This work implies that Ag NPs could have long residence times in aquatic systems in the presence of HS potentially resulting in increased bioavailability.     

Preparation of nanocomposites consisting of an epoxyamine polymer matrix with silver nanoparticles

A promising method is presented for the preparation of polymer composites in situ containing stabilized silver nanoparticles without the use of additional reducing systems. The effects of functionality and the structure of the epoxyamine polymer matrices on their capacity to reduce silver ions and stabilize growing silver nanoparticles were evaluated.     

Preparation of conducting silver paste with Ag nanoparticles prepared by e-beam irradiation

Conducting silver paste was prepared by using Ag nanoparticles which were synthesized by e-beam irradiation method (from KAERI); its conductivity was comparatively determined with Ag nanoparticles which were prepared by thermolysis method (commercial). The silver nanoparticles with the diameter of approximately 150 nm size prepared by e-beam irradiation were mixed with glass frit and sintered for 1 h at 500 °C. It is presumably concluded that the wt% of silver nanoparticle, size distribution and homogenous dispersibility of Ag nanoparticles in the pastes are the critical factors for the high conductivity of the paste. Among the various wt% of silver nanoparticle in the conducting silver pastes, silver paste with 90 wt% of silver nanoparticle has the highest conductivity as 1.6×10⁴ S cm^?1. This conductivity value is 1.6 times higher than the Ag pastes which were prepared with silver nanoparticles obtained by thermolysis method.     

Preparation of silver nanoparticles in solution from a silver salt by laser irradiation

A new method is proposed for the fabrication of a well-defined size and shape distribution of silver nanoparticles in solution; the method employs direct laser irradiation of an aqueous solution containing a silver salt and a surfactant in the absence of reducing agents.     

Generation of nanoparticles with adjustable size and controlled stoichiometry: recent advances

We present a bottom-up fabrication route based on the sputtering gas aggregation source that allows the generation of nanoparticles with controllable and tunable chemical composition while keeping the control of the cluster size. We demonstrate that the chemical composition of the particles can be monitored by the individual adjustment of the working parameters of the magnetrons inserted in a gas aggregation zone. Such control of the parameters leads to a fine control of the ion density of each target material and hence to the control of the chemical composition of the nanoparticles. In particular, we show through X-ray photoemission, atomic force microscopy, and high-resolution transmission electron microscopy that it is possible to generate bimetallic (AgAu) and trimetallic (AgAuPd) alloy nanoparticles with well-defined and tunable stoichiometries from three targets of pure Ag, Au, and Pd. The proposed route for the generation of nanoparticles opens new possibilities for the fabrication of nanoparticles using a physical method that, for some applications, could be complementary to the chemical methods.     

Gold and silver nanoparticles functionalized with known numbers of oligonucleotides per particle for DNA detection

The biospecificity of gold and silver nanoparticles, functionalized with known numbers of oligonucleotides, is demonstrated in colorimetric microbead assays for complementary and mismatch sequences.     

Synthesis of size tunable monodispersed silver nanoparticles and the effect of size on SERS enhancement

Spherical and monodispersed silver nanoparticles (AgNPs) are ideal for fundamental research as the contribution from size and shape can be accounted for in the experimental design. In this paper a seeded growth method is presented, whereby varying the concentration of sodium borohydride-reduced silver nanoparticle seeds, different sizes of stable spherical nanoparticles with a low polydispersity nanoparticles are produced using hydroquinone as a selective reducing agent. The surface-enhanced Raman scattering (SERS) enhancement factor for each nanoparticle size produced (17, 26, 50, and 65 nm) was then assessed using three different analytes, rhodamine 6G (R6G), malachite green oxalate (MGO) and thiophenol (TP). The enhancement factor gives an indication of the Raman enhancement effect by the nanoparticle. Using non-aggregated conditions and two different laser excitation wavelength (633 nm and 785 nm) it is shown that an increase in particle size results in an increased enhancement for each analyte used.     

Preparation and controlled self-assembly of Janus magnetic nanoparticles

Janus magnetic nanoparticles (~20 nm) were prepared by grafting either polystyrene sodium sulfonate (PSSNa) or polydimethylamino ethylmethacrylate (PDMAEMA) to the exposed surfaces of negatively charged poly(acrylic acid) (PAA)-coated magnetite nanoparticles adsorbed onto positively charged silica beads. Individually dispersed Janus nanoparticles were obtained by repulsion from the beads on reversal of the silica surface charge when the solution pH was increased. Controlled aggregation of the Janus nanoparticles was observed at low pH values, with the formation of stable clusters of approximately 2-4 times the initial size of the particles. Cluster formation was reversed, and individually dispersed nanoparticles recovered, by restoring the pH to high values. At intermediate pH values, PSSNa Janus nanoparticles showed moderate clustering, while PDMAEMA Janus nanoparticles aggregated uncontrollably due to dipolar interactions. The size of the stable clusters could be controlled by increasing the molecular weight of the grafted polymer, or by decreasing the magnetic nanoparticle surface availability for grafting, both of which yielded larger cluster sizes. The addition of small amounts of PAA-coated magnetic nanoparticles to the Janus nanoparticle suspension resulted in a further increase in the final cluster size. Monte Carlo simulation results compared favorably with experimental observations and showed the formation of small, elongated clusters similar in structure to those observed in cryo-TEM images.