含磷手性化合物在多聚糖类手性固定相上的手性分离

在纤维素 三(3,5 二甲基苯基氨基甲酸酯)(ChiralcelOD)和直链淀粉 三(3,5 二甲基苯基氨基甲酸酯)(ChiralpakAD H)手性固定相上,采用高效液相色谱正相条件,分离了系列含磷手性化合物。考察了流动相中有机改性剂的种类及浓度对手性分离的影响;研究了化合物的结构与保留及对映体选择性的关系;并探讨了手性识别机理。     

Synthesis and structural characterization of chiral dicationic imidazolophanes

Various chiral dicationic benzimidazolophanes were obtained from optically pure (S)-BINOL, benzimidazole and a suitable aryl alkyl dibromide.     

Preparation and chiral recognition in HPLC of cellulose 3,5-dichlorophenylcarbamates immobilized onto silica gel

The 3,5-dichlorophenylcarbamates (2) of cellulose bearing a small amount of 3-(triethoxysilyl)propyl residues were synthesized by a one-pot process and immobilized onto a silica gel through intermolecular polycondensation of the triethoxysilyl groups. The obtained cellulose derivatives were characterized by (1) H NMR and elemental analysis (EA), and their recognition abilities were evaluated by high-performance liquid chromatography (HPLC). The cellulose derivatives containing about 1-5% of the 3-(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition ability. The immobilized chiral packing materials (CPMs) could be used with the eluents containing chloroform and tetrahydrofuran (THF), which cannot be used with the conventional coated-type chiral packing materials. By using these eluents, the chiral recognition for many racemates was improved.     

Preparation and chiral recognition ability of crosslinked beads of polysaccharide derivatives

The spherical beads consisting of cellulose 3,5-dimethylphenylcarbamate with partial hydroxyl groups were prepared to be used as chiral packing materials (CPMs) for HPLC. The beads were obtained without using macroporous silica gel, which is usually used as the support of the CPMs based on the polysaccharide derivatives. After the crosslinking in the bead with diisocyanates, such as 4,4'-diphenylmethane diisocyanate (MDI), 4,4'-dibenzyl diisocyanate (DBDI), tolylene-2,4-diisocyanate (TDI), and m-xylylene diisocyanate (XDI), the obtained beads were packed into an HPLC column. As the content of the hydroxyl groups of the cellulose derivatives decreased, the obtained CPM exhibited a higher chiral recognition ability. The beads possessed a higher loading capacity than the CPM prepared by coating the cellulose derivative on silica gel. The crosslinked beads could be used with the eluent containing chloroform. The amylose derivative beads were also prepared as a CPM for chiral HPLC.     

The highly enantioselective Diels-Alder reaction of 1,2-dihydropyridine using chiral cationic palladium-phosphinooxazolidine catalyst for the synthesis of chiral isoquinuclidines

The enantioselective Diels-Alder reactions of 1-phenoxycarbonyl-1,2-dihydropyridine with 1-alkylated acryloyl-pyrazolidin-3-ones using chiral cationic palladium-phosphinooxazolidine (Pd-POZ) catalyst afforded chiral isoquinuclidines with excellent enantioselectivity (up to 97% ee).     

Synthesis of novel chiral imidazolium stationary phases and their enantioseparation evaluation by high-performance liquid chromatography

Two novel chiral stationary phases (CSPs) were prepared by bonding chiral imidazoliums on the surface of silica gel. The chiral imidazoles were derivatized from chiral amines, 1-phenylethylamine and 1-(1-naphthyl)ethylamine. The obtained CSPs were characterized by Fourier Transform Infrared (FT-IR) spectroscopy and elemental analysis (EA), demonstrating the bonding densities of CSP 1 and CSP 2 were 0.43 mmol g⁻¹ and 0.40 mmol g⁻¹, respectively. These two CSPs could be used to availably separate 8 pharmaceuticals, 7 mandelic acid/its derivatives, 2 1-phenylethylamine derivatives, 1 1,1′-bi-2-naphthol, and 1 camphorsulfonic acid in high-performance liquid chromatography (HPLC). It is found that CSP 1 could effectively enantioseparate most chiral analytes, especially the acidic components, while CSP 2 could enantiorecognize all chiral analytes, although a number of components did not achieve baseline separation. Additionally, the effects of mobile phase composition, mobile phase pH and salt content, chiral selector structures, and analyte structures on the enantiorecognitions of the two CSPs were investigated. It is found that high acetonitrile content in mobile phases was conducive to enantiorecognition. Mobile phase pH and salt content could alter the retention behaviors of different enantiomers of the same chiral compound, resulting in better enantioresolution. Moreover, both chiral selector structures and substituted groups of analytes played a significant role in the separation of chiral solutes.     

Chiral nitrogen-containing calix[4]crown—an excellent receptor for chiral recognition of mandelic acid

A chiral nitrogen-containing calix[4]crown 2 bearing optically pure 1,2-diphenyl-1,2-oxyamino residue at lower rim showed excellent chiral recognition between enantiomers of mandelic acid. Using competitive ¹H NMR titration the ratio of association constants of (S)- and (R)-mandelic acid with the chiral calix[4]crown was determined to be 102, that is 98% de, which is the best result obtained from artificial receptors for the chiral recognition of mandelic acid up to now.     

CDMPC手性固定相对新型金属簇化合物的手性拆分

应用纤维素三（3,5-二甲基苯基氨基甲酸酯）（cellulose tris (3, 5- dimethylphenylcarbamate,CDMPC）手性固定相对两种新型金属簇合物进行了拆分,通过流动相组成、流速和样品溶剂等条件对拆分影响的考察进行了拆分条件的优化。实验结果表明,簇合物1和簇合物2分别在含乙醇V(hexane)∶V(ethanol)=95∶5)和异丙醇(V(hexane)∶V(2-propanol)=90∶10)的流动相中得到了较好的拆分,将样品溶解在和流动相组成相近的溶剂中更利于簇合物拆分,簇合物配体结构对簇合物在固定相上的保留和拆分有重要的影响。 在优化条件下,2种金属簇合物分离度均达到1.5以上。     

A new type of chiral porphyrin: Organopalladium porphyrins with chiral chelating diphosphine ligands

Peripherally palladated Ni(II) porphyrins have been prepared using enantiopure chiral chelating diphosphines as supporting ligands on the attached Pd(II) fragment. Both enantiomers of the following complexes have been obtained in good yields, using oxidative addition of the bromoporphyrin starting material 5-bromo-10,20-diphenylporphyrinatonickel(II) (NiDPPBr (1)) to the [Pd⁰L] complex generated in situ from Pd₂dba₃ and the chiral ligand L: [PdBr(NiDPP)(CHIRAPHOS)] (2a,b) [CHIRAPHOS = 2,3-bis(diphenylphosphino)butane], [PdBr(NiDPP)(Tol-BINAP)] (3a,b) [Tol-BINAP) = 2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl] and [PdBr(NiDPP)(diphos)] [diphos = 1,2-bis(methylphenylphosphino)benzene] (4a,b). The induced asymmetry in the porphyrin was readily detected by ¹H NMR and CD spectroscopy. The porphyrin chiroptical properties are strongly dependent upon the structure of the chiral ligand, such that a monosignate CD signal, and symmetric and asymmetric exciton couplets were observed for 4a, 2b, and 3a,b, respectively.     

Hybrid polyacrylamide chiral stationary phases for HPLC prepared by surface-initiated photopolymerization

Two hybrid polyacrylamide chiral stationary phases (CSPs) for HPLC have been synthesized by a new surface-initiated photo-induced radical polymerization approach of enantiopure N,N'-diacryloyl derivatives of (1R,2R)-diaminocyclohexane (CSP1) and (1R,2R)-diphenylethylenediamine (CSP2). This system is based on the activation of mesoporous silica microparticles by chemically bonded trichloroacetyl groups and dimanganese decacarbonyl as catalyst. UV irradiation was performed using a lab-made quartz photochemical reactor, ad hoc designed for the photo-induced polymerization process on the surface of microparticles. The two phases were evaluated and compared as chromatographic supports for the enantioselective HPLC of model chiral compounds. Their physico-chemical properties and chromatographic performances were also evaluated in comparison with those exhibited by the homologue CSPs obtained by the grafting-from thermal-induced process (CSP3 and CSP4). The new photopolymerization approach yielded higher grafting density than the thermal-induced one, especially in the case of the less reactive monomer (the diacryloyl derivative of (1R,2R)-diphenylethylenediamine), good chromatographic efficiency and a broad application field under normal phase and polar organic mode conditions.     

Asymmetric synthesis of 1,2-bis(diphenylphosphino)-1-phenylethane via a chiral palladium template promoted hydrophosphination reaction

An organopalladium(II) complex derived from (S)-N,N-dimethyl-1-(1-naphthyl)-ethylamine was employed as the chiral auxiliary to promote the asymmetric hydrophosphination reactions between diphenylphosphine and (E) or (Z)-diphenylphosphinostyrene in high regio- and stereoselectivities at low temperature with triethyl amine as external base. Optically active free ligand (R)-1,2-bis(diphenylphosphino)-1-phenylethane was obtained in high yield subsequently. Mechanistic pathways explaining the stereoselectivity of the chiral organopalladium template promoted hydrophosphination reactions are also proposed.     

Effect of the structure of organic phosphonate compounds on chiral separations on derivatized cellulose chiral stationary phase

Summary The enantiomers of eightO,O-dialkyl-2-benzyloxycarbonylaminoarylmethyl phosphonates have been directly separated on a tris(3,5-dimethylphenylcarbamate) cellulose column. The results are very different from those obtained by separation on anN-(3,5-dinitrobenzoyl)leucine (DNBleu) column. The effect of mobile phase composition and column temperature on retention and enantioselectivity were investigated. The effect on chiral separation of the length of, and steric hindrance by, alkoxyl groups of the phosphonate ester and of the nature of the substitutentsp-Cl andp-H on the benzene ring attached to the chiral carbon atom are also discussed.     

Determination of the enantiomeric composition of chiral carboxylic acids using chiral derivatization and HPLC

Summary The enantiomers of chiral carboxylic acids were separated as their diastereomeric amides with (1R,2R)-(−)-1-(4-nitrophenyl)-2-amino-1,3-propanediol (“levobase”) and with “dextrobase” (the enantiomer of levobase) by high-performance liquid chromatography using a conventional C-18 column and various solvent systems containing acetonitrile, methanol, water, and phosphoric acid.     

Synthesis of noval chiral tridentate amino alcohols as chiral solvating agents under ball-milling conditions

A new family of chiral solvating agents based on chiral didentate amino alcohols and chloromethyl pyridine derivatives were synthesized by ball milling in solvent free condition. The new chiral tridentate amino alcohols were tested as chiral NMR solvating agents for the Ts-derivatives of amino acids, other several acids and pyrazole drugs. For the Ts-derivatives of amino acids studied herein, chiral tridentate amino alcohol 3a could be used for the assignment of the absolute configurations of their racemes through the chemical shift non-equivalences of their CH₃ (Ts) protons with certain confidence.     

Stable hydrazone-linked chiral covalent organic frameworks: Synthesis,modification, and chiral signal inversion from monomers

The designed synthesis of chiral covalent organic frameworks(COFs) featuring intriguing properties is fairly scant and remains a daunting synthetic challenge.Here we develop a de novo synthesis of an enantiomeric pair of 2 D hydroxyl-functionalized hydrazone-linked chiral COFs,(S)-and(R)-HthBta-OH COFs,using enantiopure 2,5-bis(2-hydroxypropoxy)terephthalohydrazide(Hth) as monomers.The fo rmation process of hydroxyl-functionalized chiral COFs was monitored using rigorous time-dependent PXRD,vibrational circular dichroism(VCD),and electronic circular dichroism(ECD) studies.Remarkably,VCD spectra indicated a unique chiral signal inversion from the positive Cotton effect of(S)-Hth monomer to the negative Cotton effect of(S)-HthBta-OH COF,which has never been reported in chiral COFs.Moreover,two unprecedented carboxyl-functionalized chiral COFs,(S)-and(R)-HthBta-COOH,were constructed by a post-synthetic modification of the corresponding hydroxyl chiral COFs with succinic anhydride.Notably,carboxyl-functionalized COFs retained homochirality and crystallinity without linker racemization and structural collapse after the chemical modification due to the chemically robust nature of pristine hydrazone-linked chiral COFs.     

New hybrid polymeric liquid chromatography chiral stationary phase prepared by surface-initiated polymerization

A new hybrid organic/inorganic HPLC chiral stationary phase (CSP1) has been synthesized by the grafting from (g-from) radical polymerization of an enantiopure diacryloyl derivative of trans-1,2-diaminocyclohexane in the presence of mesoporous, azo-activated silica particles. The new chiral stationary phase has been fully characterized by elemental analysis, differential scanning calorimetry, diffuse reflectance infrared spectroscopy, scanning electron microscopy, inverse size exclusion chromatography and Van Deemter analysis. CSP1 shows improved chromatographic performances compared to its analog CSP2 synthesized by the alternative grafting to (g-to) approach in which the azo initiator is kept in solution. CSP1 can successfully resolve several chemically diverse chiral compounds, using both organic and water-based eluents (normal phase, polar organic, etc.).     

Enantiomeric fraction determination of chiral drugs in environmental samples using chiral liquid chromatography and mass spectrometry

When it was recognized that chiral drug residues have stereospecific toxicity towards environmental organisms the attention given to enantiomeric fraction determination of chiral drugs in the environment increased. Among various analytical techniques, chiral liquid chromatography (LC) coupled with mass spectrometry (MS) has been widely used due to its simplicity, wide applicability and high sensitivity. In this review, we aim to provide a comprehensive overview and comparison of the types of chiral stationary phases, elution modes and MS detection techniques employed and address the advances and limitations. The impact of the mobile phase composition on enantioseparation and MS detection are discussed based on the different methods developed. In addition, diverse applications for the enantiomeric fraction determination of chiral drugs in environmental matrices using chiral LC and MS are discussed in depth.     

Scalemic and racemic imprinting with a chiral crosslinker

The development of molecularly imprinted chiral stationary phases has traditionally been limited by the need for a chiral pure template. Paradoxically, availability of a chiral pure template largely defeats the purpose of developing a chiral stationary phase. To solve this paradox, imprinting of scalemic and racemic template mixtures was investigated using both chiral (N-α-bismethacryloyl-l-alanine) and achiral (N,O-bisacrylamide ethanolamine) crosslinkers. Imprinting of scalemic mixtures provided polymers capable of partial separation of Boc-tyrosine enantiomers with virtually the same results when using either the chiral or achiral crosslinker. However, the chiral crosslinker was required for chiral differentiation by the racemic imprinted polymers which were evaluated in both batch rebinding and chromatographic modes. Batch rebinding analysis revealed intersecting binding isotherms for the L- and D-Boc-tyrosine, indicating bias for the D or L enantiomer is concentration dependent. Partial chromatographic separation was achieved by the racemic imprinted polymers providing variable D or L bias in equal probability over multiple replicates of polymer synthesis. Correlation of enantiomer bias with the batch rebinding results and optimization of HPLC parameters are discussed.     

Deepened chiral cavitands

Deep cavitands bearing eight asymmetric centers on their upper rims are prepared from octamino resorcinarenes. The resorcinarenes are acylated with Fmoc d- and l-alanine or Fmoc glycine acid chlorides. The asymmetric centers create a chiral magnetic environment as shown by binding achiral ?-caprolactam. The chiral steric environment shows modest enantioselectivity (55% de) for chiral guests such as pinane diols bound inside the cavitand.     

Determination of absolute configuration of 2-methyl-1-(o-tolyl)naphthalene and the related axially chiral biaryls

An enantiomerically enriched sample (84.3% ee) of (aS)-2-methyl-1-[(((o-triisopropylsilyl)oxy)methyl)phenyl]naphthalene was produced via catalytic asymmetric Suzuki-Miyaura cross-coupling using an atropisomeric naphthamide-derived phosphine (A²phos) as the chiral ligand. After one recrystallization, enantiopurity of the biaryl product was improved to 98.9% ee and its absolute configuration was determined by X-ray crystal structural analysis. Through chemical transformations, the (aS)-enantiomers of 1-[(o-hydroxymethyl)phenyl]-2-methylnaphthalene, 1-[(o-chloromethyl)phenyl]-2-methylnaphthalene, and 2-methyl-1-(o-tolyl)naphthalene were obtained. Several other chiral biaryls were synthesized and stereochemically assigned.