Functionality and structure of polymers. II. Photodimerization of polymer-bound anthryl groups and thermal dissociation of the photodimers

Anthryl groups bound to various polyesters and polyesterurethanes as side groups were photodimerized in solid state in a nitrogen atmosphere. The rate of photodimerization is strongly affected by polymer structure as observed in the photodimerization of dilute solutions. The results revealed the importance of segment mobility rather than local concentration of anthryl groups. Temperature effects on the rate of photodimerization indicated that the rate jumped above the glass transition temperature (T_g). A definite difference in photodimerization behavior was apparent between polyesters and polyesterurethanes. Anthryl groups in polyesters were to some extent photodimerized at T_g, whereas polyesterurethanes did not react at all. Hydrogen bonding in polyesterurethanes restricted the movement of anthryl groups and consequently additional energy was required to liberate them and allow photodimerization to proceed. The anthryl groups can be recovered from the photodimerized polymers by heating to 80–100°C. The activation energy of thermal dissociation of the photodimer depends to a great extent on polymer structure. These results were interpreted as being due to the strain brought about by photodimer formation exhibited this dependence. The photodimerization–thermal dissociation cycle was reversible (reversibility: 95–100% under nitrogen). A novel principle of reversible photomemory, based on dry unit processes that consisted of image recording above T_g, fixation of image by cooling below T_g, and image erasure at elevated temperature, was proposed.     

A novel nanocomposite material prepared by intercalating photoresponsive dendrimers into a layered double hydroxide

A novel combination for an inorganic-organic nanocomposite material was demonstrated. Anthryl dendron, i.e., poly(amidoamine) dendron with an anthracene chromophore group at the focal point, was incorporated in the interlayer space of ZnAl-NO₃ type layered double hydroxide (LDH) through an anion-exchange reaction. The photoabsorption and fluorescence properties of the resulting material were different from those of the bare anthryl dendron molecule. It was suggested that the change in photochemical properties was due to the organization and π-π interaction of anthracene chromophores within the interlayer of the LDH.     

Desaktivierungsverhalten von arenen und heteroarenen—XXX : Die photodimerisierung und photochemische dimerenspaltung von benzo[g]chinolin und n-methylbenzo[g]chinolinium in lösung

At high concentrations (c>l·10^-3 mol l^-1) of benzo[g]quinoline and N-mcthylbenzo[g]quinolinium a fluorescence self quenching and the formation of photodimers is observed. This photoreaction is reversible, at short range excitation (275 nm) the photodimers are broken. The quantum yields of both reactions are comparable with those of the reversible photodimerization of anthracene. The variation in the gross dimerization quantum yields at different solvents in the case of benzo[g]quinoline is not explicable by the solvent viscosity, because the S₁-life time depends on the solvent too. In this case the gross dimerization quantum yield is determined by the product k_diffτXXX^w.     

Optically pure fullerodendron formed by diastereoselective Diels-Alder reaction

The Diels-Alder reaction between C₆₀ and anthryl glycodendron, which has d- or l-gluconamides at the terminals, gave a new fullerene glycodendron conjugate. Interestingly, the diastereoselective cycloaddition reaction proceeded upon the treatment of C₆₀ with the anthryl dendron 3. Furthermore, optical pure fullerodendrons (−)-4L and (+)-4D, which were confirmed by ¹H and ¹³C NMR spectroscopy, FT-IR, MALDI-TOF mass spectroscopic analysis, were isolated from the mixture of diastereomers. And their absolute configurations were predicted by the use of CD spectra.     

The photodimerization of aceanthrylene

Sensitized photodimerization of aceanthrylene (AA) with Rose Bengal in methanol produced both syn and anti head-to-head and head-to-tail stereoisomers with slight preference for syn adducts. The stereochemical configurations were assigned by deuterium labeling and by high field homonuclear shift correlation (COSY) experiments and these compare favorably with the assignments made for the photodimers of 1-substituted acenaphthylenes. Currently, AA has photodimerized under direct irradiation only in carbon disulfide.     

Highly stereoselective photocyclodimerization of alpha-cyclodextrin-appended anthracene mediated by gamma-cyclodextrin and cucurbit[8]uril: a dramatic steric effect operating outside the binding site

Photocyclodimerization of alpha-cyclodextrin (CD)-appended anthracene was studied in the presence of gamma-CD and cucurbit[8]uril (CB[8]) hosts to manipulate the stereodifferentiating photoreaction occurring inside the cavity by the bulky attachment located outside. The gamma-CD-mediated photodimerization afforded the head-to-tail photodimers in 98% combined yield, in particular, the syn-head-to-tail photodimer of 91% ee in 68% yield, which are much greater than 32% ee and 44% yield obtained with unmodified anthracene carboxylate. The use of CB[8] also led to a striking inversion of the head-to-tail/head-to-head selectivity, affording exclusively the head-to-head photodimers in 99% combined yield.     

Magnetic and Mössbauer Study of the Novel FeIn2S2Se2 Layered Compound

The magnetic properties of the new polymorphic FeIn₂S₂Se₂ compound are presented. The system crystallizes in the α-FeGa₂S₄ structure at low temperatures, and undergoes a transition to a MgAl₂S₄-type structure at T>850°C. For this high-temperature phase, low-field magnetization data show a peak at T₁=12.5(5) K, below which magnetic irreversibility is observed. High-temperature susceptibility fits indicate the presence of antiferromagnetic interactions with a high degree of frustration. The effective magnetic moment μ_eff=4.54(3) μ_B agrees with the expected 3d⁶ (S=2) configuration for Fe²⁺. Mössbauer spectroscopy showed that Fe²⁺ ions are distributed in tetrahedral (A) and octahedral (B) sites with a B:A≈1 ratio. The ac susceptibility data were analyzed according to conventional power law dynamics, giving a freezing temperature T_g=12.5(2) K and critical exponent zν=6.5±1, in agreement with Monte Carlo simulations for 3D short-range Ising spin-glass systems.     

Facile and reversible synthesis of an acidic water-soluble poly(amidoamine) fullerodendrimer

Water-soluble fullerodendrimer was obtained by the use of a Diels-Alder reaction of C₆₀ with a newly designed anthryl dendron under an extremely mild condition in 70% yield, which is more than five times as high as the yield described in our previous report.     

Pressure induced mechanical properties of boron based pnictides

The elastic and thermodynamical properties of the III–V semiconductors as BY (Y = N, P, As) are calculated in zincblende and NaCl phases by formulating an effective interionic interaction potential. This potential consists of the long-range Coulomb, the Hafemeister and Flygare type short-range overlap repulsion extended up to the second neighbour ions and the van der Waals (vdW) interaction. The variations of elastic constants with pressure follow a systematic trend identical to that observed in other compounds of ZnS type structure family and the Born relative stability criteria is valid in boron monopnictides. From the elastic constants the Poisson's ratio ν, the ratio R_S/B of S (Voigt averaged shear modulus) over B (bulk modulus), elastic wave velocity, average wave velocity and thermodynamical property Debye temperature are calculated. By analyzing the Poisson's ratio ν and the ratio R_S/B we conclude that at low pressures the boron monopnictides are brittle in nature in ZnS phase and ductile nature at high pressures in both ZnS and NaCl phases. To our knowledge this is the first quantitative theoretical prediction of the pressure dependence of ductile (brittle) nature of BY compounds.     

Ferroelectric perovskite-type barium copper niobate: BaCu1/3Nb2/3O3

A perovskite-type BaCu_1/3Nb_2/3O₃ was prepared by high temperature reaction using BaCO₃, CuO and Nb₂O₅. The X-ray powder diffraction pattern of this compound was indexed with the tetragonal cell with the lattice parameters of a=4.0464(4) and c=4.1807(4) Å (c/a=1.033). This compound had the tetragonal perovskite-type structure in which the B site was occupied statistically by Nb and Cu atoms. From high temperature X-ray powder diffraction patterns this compound had a phase transition from the tetragonal to cubic symmetry in the temperature range of 500-600 °C. The P-E and S-E hysteresis loops occurred at room temperature and the apparent maximum in the temperature dependence of the dielectric constant was observed at 520 °C. The temperature dependence of the inverse of magnetic susceptibility exhibited paramagnetic behavior.     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Enhancement of intramolecular excimer formation and photodimerization of anthrylmethyl α,ω-alkanedioates via hydrophobic interactions

The fluorescence spectra and photodimerization of anthrylmethyl a,w-alkanedioates (A-Mn-A) both in organic and in aqueous organic mixed solvents have been studied.In aqueous organic mixed solvents strong intramolecular excimer emission is detected and the quantum yield for the intramolecular photodimerization is significantly greater than those in organic solvents.These observations suggest that hydrophobic interactions force A-Mn-A molecule to self-coil.The ratio of the head-to-head to head-to-tail products in the intramolecular photodimers of A-Mn-A depends on the length of the linking chain.This work presents a successful example of application of hydrophobic interactions to enhancement of large-ring formation.     

Photodimers of cinnamic acid and related compounds. A stereochemical study by NMR

¹H NMR spectra of photodimers of cinnamic acid, chalcone and related compounds were analysed, and the spectral parameters and all the coupling constants were obtained. A clear differentiation among the head-to-head and head-to-tail stereoisomers can be obtained by considering the values of K, L, M and N parameters. The different types of hh and ht isomers can be immediately assigned by considering the relative values of the three-bond couplings. An authentic example of an A₂B₂ spin system is reported.     

Separation of 5-Lipoxygenase Metabolites Using Cyclodextrin-Modified Microemulsion Electrokinetic Chromatography and Head Column Field-Amplified Sample Stacking

A cyclodextrin-modified microemulsion electrokinetic chromatography method employing head column field-amplified sample stacking was developed for the analysis of arachidonic acid metabolites of the lipoxygenase pathways. The influence of the concentration of boric acid, the surfactant sodium dodecyl sulfate, the co-surfactant 1-butanol and the oil phase octane as well as the pH of the background electrolyte, the separation voltage and the separation temperature was studied. The optimized microemulsion consisting of 20 mM boric acid buffer, pH 9.0, 3.0 % (m/v) sodium dodecyl sulfate, 0.5 % (v/v) octane, 5.0 % (v/v) 1-butanol and 15 mM α-cyclodextrin enabled the separation of 20-hydroxy-leukotriene B₄, leukotriene B₄, 6-trans-leukotriene B₄, 6-trans-12-epi-leukotriene B₄, 5(S)-hydroxy-6-trans-8,11,14-cis-eicosatetraenoic acid, 12(S)-hydroxy-5,8,14-cis-10-trans-eicosatetraenoic acid, 15(S)-hydroxy-5,8,11-cis-13-trans-eicosatetraenoic acid as well as the internal standard prostaglandin B₁ in <10 min employing a separation voltage of 17.5 kV at a temperature of 23 °C. A matrix peak from solid-phase extraction sample workup co-migrated with 5(S)-hydroxy-6-trans-8,11,14-cis-eicosatetraenoic acid affecting peak integration. The addition of 5 % (v/v) 2-propanol to the microemulsion resulted in the separation of this eicosatetraenoic acid and the matrix components at the expense of analysis time and peak resolution between the diastereomers 6-trans-leukotriene B₄ and 6-trans-12-epi-leukotriene B₄. In summary, the MEEKC method appeared to be especially suitable for the more polar arachidonic acid metabolites.     

Heat Capacities and Thermodynamic Properties of a H2O + Li2B4O7 Solution in the Temperature Range from 80 to 356 K

The molar heat capacities of an aqueous Li₂B₄O₇ solution were measured with a precision automated adiabatic calorimeter in the temperature range from 80 to 356 K at a concentration of 0.3492 mol⋅kg⁻¹. The occurrence of a phase transition was determined based on the changes in the curve of the heat capacity with temperature. A phase transition was observed at 271.72 K corresponding to the solid-liquid phase transition; the enthalpy and entropy of the phase transition were evaluated to be Δ H _m = 4.110 kJ⋅mol⁻¹ and Δ S _m = 15.13 J⋅K⁻¹⋅mol⁻¹, respectively. Using polynomial equations and thermodynamic relationship, the thermodynamic functions [H _T −H _298.15] and [S _T −S _298.15] of the aqueous Li₂B₄O₇ solution relative to 298.15 K were calculated in temperature range 80 to 355 K at intervals of 5 K. Values of the relative apparent molar heat capacities of the aqueous Li₂B₄O₇ solution, C _p,φ, were calculated at every 5 K in temperature range from 80 to 355 K from the experimental heat capacities of the solution and the heat capacities of pure water.     

Ab initio study of phase transition and bulk modulus of NaH

The phase transition of NaH from NaCl- to CsCl-type structure is investigated by an ab initio plane-wave pseudopotential density functional theory method with the norm-conserving pseudopotential scheme in the frame of the generalized gradient approximation correction; the isothermal bulk modulus and its first and second pressure derivatives of the NaCl- and CsCl-type structures under high pressure and temperature are obtained through the quasi-harmonic Debye model. The phase transition obtained from the usual condition of equal enthalpies occurs at the pressure of 32 GPa, which is consistent with the experimental and other calculated values. Through the quasi-harmonic Debye model, in which the phononic effects are considered, the dependences of cell volume V and lattice constant a on temperature T at zero pressure, the isothermal bulk modulus B₀ and its pressure derivatives B₀′and B₀″ on pressure P along isotherms 0, 300, and 600 K, are also successfully obtained.     

Photoresponsive organogels: an amino acid-based dendron functionalized with p-nitrocinnamate

An amino acid-based dendron 1, synthesized and focally functionalized with p-nitrocinnamate, can self-assemble into fibrous network in common organic solvents at low concentration. The most remarkable character of the gel from 1 is photoresponse besides thermo-reversible response. Upon irradiation with UV light at 365 nm, gel to sol transition occurred resulting from the photodimerization of p-nitrocinnamate groups. On the other hand, when the obtained solution was further exposed to short wavelength of UV light at 254 nm, the gel re-formed because of the photocleavage reaction.     

Switched enantioselectivity by solvent components and temperature in photocyclodimerization of 2-anthracenecarboxylate with 6~A,6~X-diguanidio-γ-cyclodextrins

A series of 6A,6X-diguanidio-g-cyclodextrins (CDs) were synthesized as chiral hosts for mediating the enantiodifferentiating[4+4] photocyclodimerization of 2-anthracenecarboxylic acid (AC). Variation of the temperature and the ammonia contents led to greatly enhanced head-to-head photodimers 3 and 4, companying by inversion of product chirality.     

Electronic structure,spectra, and mechanism of photodimerization of pyrimidine bases

Various electronic indices calculated by the CNDO /s-CI method for uracil, 5-fluorouracil, thymine, and cytosine and the Woodward-Hoffmann rule applied to the photodimerization of these molecules lead us to the following conclusions: (i) decrease of the C₅? C₆ bond order consequent to excitation is generally correlated with the photodimerization reaction for all the biological pyrimidines; (ii) excited pyrimidine molecules may be nonplanar and the excitation would be delocalized over both the molecules which photodimerize; (iii) electrostatic interactions may play a significant role in the initial stages of the photodimerization reaction; (iv) singlet precursors to the stable triplet photodimers may exist; and (v) electron density does not, in general, increase in the C₅? C₆ bond in the excited state as compared to the ground state, contradicting the proposals of some earlier workers. Hybrid population densities and σ-bond orders have been calculated for the first time for the molecules. Fluorine in 5-fluorouracil perturbs the hybrid populations as compared to those of uracil mainly in its vicinity.     

Low-temperature heat capacity and thermodynamic properties of endo-Tricyclo[5.2.1.0]decane

Endo-Tricyclo[5.2.1.0^2,6]decane (CAS 6004-38-2) is an important intermediate compound for synthesizing diamantane. The lack of data on the thermodynamic properties of the compound limits its development and application. In this study, endo-Tricyclo[5.2.1.0^2,6]decane was synthesized and the low temperature heat capacities were measured with a high-precision adiabatic calorimeter in the temperature range from (80 to 360) K. Two phase transitions were observed: the solid-solid phase transition in the temperature range from (198.79 to 210.27) K, with peak temperature 204.33 K; the solid-liquid phase transition in the temperature range from 333.76 K to 350.97 K, with peak temperature 345.28 K. The molar enthalpy increments, ΔH_m, and entropy increments, ΔS_m, of these phase transitions are ΔH_m=2.57 kJ · mol⁻¹ and ΔS_m=12.57 J · K⁻¹ · mol⁻¹ for the solid-solid phase transition at 204.33 K, and, Δ_fusH_m=3.07 kJ · mol⁻¹ and Δ_fusS_m=8.89 J · K⁻¹ · mol⁻¹ for the solid-liquid phase transition at 345.28 K. The thermal stability of the compound was investigated by thermogravimetric analysis. TG result shows that endo-Tricyclo[5.2.1.0^2,6]decane starts to sublime at 300 K and completely changes into vapor when the temperature reaches 423 K, reaching the maximal rate of weight loss at 408 K.