Investigation on isobaric vapor liquid equilibrium for acetic acid + water + (n-propyl acetate or iso-butyl acetate)

Isobaric vapor-liquid equilibrium (VLE) data for acetic acid + water, acetic acid + n-propyl acetate, acetic acid + iso-butyl acetate, acetic acid + water + n-propyl acetate, acetic acid + water + iso-butyl acetate are measured at 101.33 kPa with a modified Rose still. The nonideal behavior in vapor phase caused by the association of acetic acid are corrected by the chemical theory and Hayden-O’Connell method, and analyzed by calculating the second virial coefficients and apparent fugacity coefficients. The VLE data for acetic acid + water, acetic acid + n-propyl acetate, and acetic acid + iso-butyl acetate are correlated through the NRTL and UNIQUAC models using the nonlinear least square method. The obtained NRTL model parameters are used to predict the ternary VLE data. The ternary predicted values obtained in this way agree well with the experimental values.     

Palladium(II) metallomesogens of crown ether derivatized imines, and their sodium adducts

A series of imines HL_n (1) (n stands for the alkoxy chain length: 4, 6, 8, 10, and 12) has been synthesized by condensation of 4-aminobenzo-15-crown-5 and p-alkoxybenzaldehyde. Orthopalladation afforded the dinuclear derivatives [Pd(μ-OAc)L_n]₂ (2) which, by substitution reactions, led to dinuclear and mononuclear derivatives [Pd(μ-Cl)L_n]₂ (3) and [Pd(β-diket)L_n] (4) (β-diket = H₂₅C₁₂OH₄C₆-C(O)-CH-C(O)-C₆H₄OC₁₂H₂₅). The imine ligands and the acetato bridged complexes are non-mesogenic whilst the chloro-bridged and the diketonato complexes are enantiotropic liquid crystals. They display smectic A mesophases. Complexation with sodium perchlorate afforded the corresponding derivatives [(O₂ClO₂)NaCrown] (Crown = crown derivatives 1-4 for n = 4). None of the sodium adducts is mesogenic. The acetato bridged complexes consist of a mixture of syn and anti isomers and a dramatic increase in the syn:anti ratio is produced upon complexation of NaClO₄ (syn:anti = 4:96 for complexes 2 versus 54:46 for the corresponding [(O₂ClO₂)NaCrown2]). The crown ether derivatives extract sodium picrate from aqueous solutions and the presence of the palladium centers improves clearly the extraction, [Pd(μ-Cl)L_n]₂ being the best and the fastest extractor. A model for the extraction and transport process in these complexes is proposed.     

Norbornene polymerization using multinuclear nickel catalysts based on a polypropyleneimine dendrimer scaffold

Four multinuclear nickel complexes derived from generation 1 (G1) and generation 2 (G2) dendrimeric salicylaldimine ligands based poly(propyleneimine) dendrimer scaffolds of the type, DAB-(NH₂)_n (n = 4 or 8, DAB = diaminobutane) were evaluated as catalysts precursors in the polymerization of norbornene, using methylaluminoxane as co-catalyst. All four catalyst evaluated were found to be active for norbornene polymerization giving polymers with moderate to high molecular weights and low polydispersity indices. The polymerization results indicate that there is some sort of dendritic effect, in that the catalyst activity appears to be influenced by the dendrimer generation.     

Unsaturation in trinuclear cobalt carbonyl compounds of the type ECo3(CO)n (E = CH,CF, P,As; n = 9, 8, 7, 6) with Co3E tetrahedrane structures

Theoretical studies on the known trinuclear cobalt carbonyl derivatives ECo₃(CO)₉ (E = CH, CF, P, As) predict structures with carbonyl groups bridging each edge of the Co₃ triangle in contrast with experiment where structures with all terminal carbonyl groups are found in all cases. However, the energy differences are predicted to be rather small ranging from 4 ± 2 kcal/mol for FCCo₃(CO)₉ to 10 ± 3 kcal/mol for AsCo₃(CO)₉. The global minima for the unsaturated ECo₃(CO)_n (n = 8, 7, 6) derivatives generally have two (for n = 8) or three (for n = 7 and 6) carbonyl groups bridging the edges of the Co₃ triangle. However, structures with all terminal carbonyl groups are also found in all cases as well as higher energy structures in which one of the carbonyl groups bridges all three cobalt atoms. The fluoromethinyl derivatives FCCo₃(CO)_n (n = 9, 8, 7) are anomalous since their unbridged structures or structures with a carbonyl group bridging all three cobalt atoms are closer in energy to the doubly or triply bridged global minima than is the case for the other ECo₃(CO)_n derivatives.     

Dissolution behavior of tetrafluoroethylene-based fluoropolymers for 157-nm resist materials

We have synthesized various main-chain fluorinated polymers and studied base-resin properties, such as transparency at 157 nm, solubility in a standard alkaline developer, and lithographic performance. Main-chain-fluorinated polymers were synthesized by copolymerization of tetrafluoroethylene (TFE) with cyclic monomers, especially newly synthesized norbornene derivatives. We studied the correlation between pK_a(OH) and the solubility of the copolymers of TFE and functional (fluoroalkyl alcohol group) norbornenes. Their solubility depends on the pK_a value of the fluoroalkyl alcohol groups.We studied the impact of the polymerization initiators on base-resin properties. High transparency was obtained by using the fluorocarbon initiator. It was also confirmed that the monocyclic component improves dry-etch resistance and that fluorination at the terminal groups improves alkaline solubility.In addition, we found that the development characteristics of TFE/norbornene copolymers were significantly improved by the stereoselective (endo versus exo) partial protection of the hydroxyl groups in the fluoroalkyl alcohol moiety attached to norbornene unit. The polymer protected only in the exo position of the norbornene unit in the copolymer had a higher R_max and a higher contrast. Positive-working resists based on these fluoropolymers were developed and 55 nm dense lines could be delineated by exposure at 157 nm wavelength with an alternating phase shift mask on a 0.9 NA 157 nm exposure tool.     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

Palladium-catalyzed sequential alkylation-alkenylation reactions: application towards the synthesis of polyfunctionalized fused aromatic rings

The synthesis of polyfunctionalized fused aromatic carbo- and heterocycles from aryl iodides and bromoenoates via a tandem palladium-catalyzed aromatic substitution intramolecular Heck sequence is reported. Using Pd(OAc)₂ and tri-2-furylphosphine (TFP) in the presence of norbornene and Cs₂CO₃ in CH₃CN at 85 °C gave a variety of functionalized bi- and tricyclic fused aromatic rings in good yield.     

Synthesis of novel lipophilic and/or fluorophilic ethers of perfluoro-tert-butyl alcohol, perfluoropinacol and hexafluoroacetone hydrate via a Mitsunobu reaction: Typical cases of ideal product separation

Fluorophilic ethers having the structure RC(CF₃)₂O(CH₂)₃C_nF_2n + 1 are obtained in high yields, when F-tert-butyl alcohol (R = CF₃), F-acetone hydrate (R = O(CH₂)₃C_nF_2n + 1), F-pinacol (R = C(CF₃)₂O(CH₂)₃C_nF_2n + 1) are reacted with 3-perfluoroalkyl-1-propanols (C_nF_2n + 1(CH₂)₃OH, n = 4, 6, 8, 10) in a Mitsunobu reaction (Ph₃P/DIAD [i-PrO₂CN = NCO₂Pr-i]/ether). The parent lipophilic ethers with the structure of (CF₃)₃CO(CH₂)₃C_nH_2n + 1 were prepared analogously using the corresponding fatty alcohols and F-tert-butyl alcohol. To achieve ideal separations, products were transferred to orthogonal phases relative to the other reaction components using fluorous extraction, fluorous solid-organic liquid filtration, or steam-distillation. Selected physical properties including melting and boiling point, together with fluorous partition coefficients of these ethers were determined and the figures obtained were qualitatively analyzed using relevant thermodynamic theories. Some of these ethers are liquids with rather low freezing points and are miscible with fluorocarbon solvents.     

N-Alkylation of carbamates and amides with alcohols catalyzed by a CpIr complex

New atom-economical catalytic systems consisting of [Cp^∗IrCl₂]₂/NaOAc (Cp^∗=pentamethylcyclopentadienyl) for the N-alkylation of carbamates and amides using alcohols as alkylating agents under solvent-free conditions have been developed. For example, the reaction of n-butyl carbamate with benzyl alcohol in the presence of [Cp^∗IrCl₂]₂ (5.0 mol % Ir) and NaOAc (5.0 mol %) at 130 °C under the absence of solvent gives n-butyl N-benzylcarbamate in the yield of 94%. The present catalytic system is applicable to not only carbamates but also amides, and only harmless water is produced as co-product.     

Hetero-metallic frameworks of [Pd(CN)4] and Cu(II) with triamines: A rare example of a tetracyanometallate bridged 2D coordination polymer

Four cyano bridged Cu(II)–Pd(II) heterometallic complexes, [Cu(dpt)Pd(CN)₄]_n (1), {[Cu₂(medpt)₂Pd(CN)₄](ClO₄)₂ · 3H₂O}_n (2), {[Cu₂(dien)₂Pd(CN)₄](ClO₄)₂ · 2CH₃OH}_n (3) and {[Cu₂(iPrdien)₂Pd(CN)₄](ClO₄)₂ · 2H₂O}_n (4) [dpt = 3,3′-iminobispropylamine; medpt = 3,3′-diamino-N-methyldipropylamine; dien = diethylenetriamine and iprdien = N′-isopropyldiethylenetriamine] have been synthesized and characterized by single crystal X-ray diffraction analysis, magnetic measurement and thermal study. Complexes 1, 2 and 3 are 1D coordination polymers, while 4 presents a 2D network. In 1, the cis-directed cyanide ligands of [Pd(CN)₄]²⁻ anions link two Cu(dpt) units to form a neutral coordination polymer, whereas in 2, 3 and 4, all the cyanide groups of [Pd(CN)₄]²⁻ take part in bonding with four adjacent Cu(II) ions, resulting in cationic coordination polymers counterbalanced by perchlorate anions. The structures are compared with those of analogous [Ni(CN)₄]²⁻ derivatives. The magnetic behavior shows antiferromagnetic interactions in all the complexes.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

α-Diimines as nitrogen ligands for ruthenium-catalyzed allylation reactions and related (pentamethylcyclopentadienyl) ruthenium complexes

The new Cp*Ru(II) (Cp*: pentamethylcyclopentadienyl) complexes Cp*(dab-R)RuCl, [Cp*(dab-R)(MeCN)Ru][PF₆] (dab-R: RNCH-CHNR; R: iso-propyl, mesityl), and [Cp*(cod)(MeCN)Ru][PF₆], are synthesized in high yields by reacting the corresponding α-diimine or 1,5-cyclooctadiene with [Cp*RuCl]₄ and [Cp*(MeCN)₃Ru][PF₆], respectively. The α-diimine ligands are strongly bonded to the ruthenium centre as shown by the subsequent formation of the alkynyl derivatives Cp*(dab-R)RuCCR′ (R′ = tert-butyl or phenyl) and of the cationic derivatives [Cp*(dab-R)(L)Ru][PF₆] (L = CO, PMe₃). The neutral and cationic α-diimine or 1,5-cyclooctadiene ruthenium complexes are compared as catalyst precursors for the ruthenium-catalyzed allylation of diethyl-sodiomalonate and diethylamine with cinnamyl acetate or ethyl cinnamyl carbonate.     

Synthesis of diarylamines in the benzo[b]thiophene series bearing electron donating or withdrawing groups by Buchwald-Hartwig C-N coupling

Diarylamines in the benzo[b]thiophene series bearing electron donating or withdrawing groups, were prepared by Buchwald-Hartwig C-N coupling in moderate to high yields. The conditions used were Pd(OAc)₂ (3 mol%), BINAP as ligand (4 mol%) and Cs₂CO₃ as base (1.4 equiv.), in toluene at 100°C, being 6-bromo or amino benzo[b]thiophenes coupled, respectively, with substituted anilines or phenylbromides. The 6-aminobenzo[b]thiophene derivatives were also prepared by palladium catalyzed C-N coupling of the corresponding 6-bromo compounds with benzophenone imine, followed by acidic hydrolysis of the imino derivatives. When 4-nitrobromobenzene and 4-bromobenzonitrile were used as coupling components, triarylamines were also isolated in small amounts. The presence of a fluorine atom on the phenylbromide highly increases the diarylamine yields.     

Synthesis and characterization of water-soluble palladium(II)-functionalized diphosphine complexes

Water-soluble functionalized bis(phosphine) ligands L (a–h) of the general formula CH₂(CH₂PR₂)₂, where for a: R = (CH₂)₆OH; b–g: R = (CH₂)_nP(O)(OEt)₂, n = 2–6 and n = 8; h: R = (CH₂)₃NH₂ ( Scheme 1), have been prepared photochemically by hydrophosphination of the corresponding 1-alkenes with H₂P(CH₂)₃PH₂. Water-soluble palladium complexes cis-[Pd(L)(OAc)₂] (1–8) were obtained by the reaction of Pd(OAc)₂ with the ligands a–h in a 1:1 mixture of dichloromethane:acetonitrile. The water-soluble phosphine ligands and their palladium complexes were characterized by IR, ¹H and ³¹P NMR. A crystallographic study of complex 1 shows that the Pd(II) ion has a square planar coordination sphere in which the acetate ligands and the diphosphine ligand deviate by less than 0.12 Å from ideal planar.     

The effect of substituents and operating conditions on the electrochemical fluorination of alkyl phenylacetates in Et3N·4HF medium

Selective electrochemical fluorination of alkyl phenylacetates (Ph-CH₂-COOR, where R is methyl, ethyl, n-propyl, n-butyl, i-propyl and sec-butyl) under galvanostatic conditions were reported in Et₃N·4HF medium. Preparative electrolysis experiments were carried out both in pre-electrolysed dry Et₃N·4HF and the same electrolyte medium without pre-electrolysis. Very little hydrolysed fluorinated products were obtained in pre-electrolysed medium where as significant quantities of hydrolysed products leading to fluorinated phenylacetic acid were obtained from Et₃N·4HF without pre-electrolysis. Under optimum experimental conditions up to 87% selectivity of monofluoro ester could be achieved. Difluoro alkyl phenylacetate, monofluoro and difluoro phenylacetic acids were the other predominant side products obtained. The hydrolysis appears to be initiated by tautomeric transformation of proton after the initial electro oxidative formation of the cation radical. ¹⁹F as well as ¹H NMR spectroscopy have been employed to identify the minor constituents formed during the electro oxidative process.     

Tailored interfaces for biosensors and cell-surface interaction studies via activation and derivatization of polystyrene-block-poly(tert-butyl acrylate) thin films

Thin spin-coated films of polystyrene-block-poly(tert-butyl acrylate) (PS₆₉₀-b-PtBA₁₂₁₀) on various substrates are introduced as versatile, robust reactive platform for the immobilization of (bio)molecules for the fabrication of tailored biointerfaces. The films are characterized by high stability and (bio)reactivity due to the presence of a glassy PS and a reactive PtBA block, respectively. The selective deprotection of the tert-butyl-ester groups in the PtBA skin layer by hydrolysis under acidic conditions, the activation with N-hydroxysuccinimide and the subsequent derivatization with amino functionalized (bio)molecules were investigated. Based on contact angle, FTIR spectroscopy and XPS, fluorescence microscopy and AFM data, it was shown that the (bio)molecules were coupled covalently to the polymer films and that high molecular coverages up to ∼2.4 poly(ethylene glycol) (PEG) molecules per nm² (M_n = 500 g/mol) were obtained. Organic dyes, polyamidoamine dendrimers, polypeptides, proteins and amino end-functionalized DNA were efficiently and homogeneously immobilized on the PS-PtBA platforms. Grafting of ω-amino functionalized PEG afforded surfaces with substantially reduced non-specific adsorption of proteins and DNA. Owing to the glassy nature of PS and the covalent amide linkages, the derivatized films showed excellent stability under a broad range of processing conditions. Finally, the viability of PS₆₉₀-b-PtBA₁₂₁₀ platforms as versatile biointerfaces was demonstrated in DNA hybridization experiments, as well as cell-surface interaction studies using pancreatic cancer and K562 cells.     

Cu(II) and Pd(II) complexes of N-(2-hydroxybenzyl)aminopyridines

N-(2-Hydroxybenzyl)aminopyridines (Lⁱ) react with Cu(II) and Pd(II) ions to form complexes in the compositions Cu(Lⁱ)₂(CH₃COO)₂ · nH₂O (n = 0, 2, 4), Pd(Lⁱ)₂Cl₂ · nC₂H₅OH (n = 0, 2) and Pd(L²)₂Cl₂ · 2H₂O. In the complexes, the ligands are neutral and monodentate which coordinate through pyridinic nitrogen. Crystal data of the complexes obtained from 2-amino pyridine derivative have pointed such a coordinating route and comparison of the spectral data suggests the validity of similar complexation modes of other analog ligands. Cu(II) complex of N-(2-hydroxybenzyl)-2-aminopyridine (L¹), [Cu(L¹)₂(CH₃COO)₂] has slightly distorted square planar cis-mononuclear structure which is built by two oxygen atoms of two monodentate carboxylic groups disposed in cis-position and two nitrogen atoms of two pyridine rings. The remaining two oxygen atoms of two carboxylic groups form two Cu and H bridges containing cycles which joint at same four coordinated copper(II) ion. IR and electronic spectral data and the magnetic moments as well as the thermogravimetric analyses also specify on mononuclear octahedric structure of complexes [Cu(L²)₂(CH₃COO)₂ · 2H₂O] and [Cu(L³)₂(CH₃COO)₂ · 4H₂O] where L² and L³ are N-(2-hydroxybenzyl)-2- or 3-aminopyridines, respectively.     

Electrochemical and bioelectrocatalytical properties of novel block-copolymers containing interacting ferrocenyl units

The electrochemical characterization of three different polystyrene-b-polybutadiene block-copolymers, functionalized with diferrocenylsilane units, is reported. The PB-blocks have been functionalized with different fractions of electronically communicated, PS_m-PB_n−p (HSiMeFc₂)_p units, where m = 615, n = 53, p = 39 (1), m = 375, n = 92, p = 76 (2) and m = 455, n = 204, p = 170 (3). Electrochemical characterization has been carried out both in solution and after electrochemical deposition onto platinum electrodes. The bioelectrocatalytical properties of electrodes modified with the polymers in the nicotinamide dinucleotide (NADH) and glucose oxidase (GOx) oxidations have been investigated as a function of the constitution and structure of the polymers. The analytical properties of electrodes modified with these polymers as sensors of NADH and GOx are described. In addition, an amperometric biosensor for glucose, prepared by electrostatic immobilization of glucose oxidase onto a platinum electrode modified with one of the ferrocenyl block-copolymers as an example, has been developed.     

Cationic iridium-BINAP complex-catalyzed addition of aryl ketones to alkynes and alkenes via directed C-H bond cleavage

Cationic Ir complex ([Ir(cod)₂]BF₄ + BINAP) catalyzed the addition of ortho-C-H bonds in aryl ketones to alkynes, which gave alkenylated products in good to high yield. Styrene derivatives were good substrates, and the enantioselective addition to norbornene was also described.     

Synthesis of ABABA pentablock copolymers via copper mediated living radical polymerisation

In this work, the syntheses of poly(butyl methacrylate-b-methyl methacrylate-b-butyl methacrylate) triblock copolymer and poly(methyl methacrylate-b-butyl methacrylate-b-methyl methacrylate-b-butyl methacrylate-b-methyl methacrylate) pentablock copolymers using copper mediated living radical polymerisation are reported. Living radical polymerisations were performed using the system Cu^IBr/N-(n-propyl)-2-pyridylmethanimine as catalyst in conjunction with a difunctional initiator, the 1,4-(2^′-bromo-2^′-methylpropionoto)benzene (1). The syntheses of poly(MMA), poly(BMA-b-MMA-b-BMA) and poly(MMA-b-BMA-b-MMA-b-BMA-b-MMA) are described in detail using ¹H NMR spectroscopy and size exclusion chromatography. The living behaviour and the blocking efficiency of these polymerisations were investigated in each case. Difunctional initiator, 1, based on hydroquinone was synthesised and fully characterised and subsequently used to give difunctional poly(methyl methacrylate) macroinitiators with molecular weights up to 54,000 g mol⁻¹ and polydispersity between 1.07 and 1.32; molecular weights were close to the theoretical values. The difunctional macroinitiators were used to reinitiate butyl methacrylate to give triblock copolymers of M_n between 17,500 and 45,700 g mol⁻¹. Polydispersities remained narrow below 25,000 g mol⁻¹ but broadened at higher masses. The difunctional triblock macroinitiators were subsequently used to reinitiate methyl methacrylate to give ABABA pentablock copolymers with M_n up to 37,000 g mol⁻¹ with polydispersity=1.13. Under certain conditions radical-radical reaction led to a broadening of polydispersity index.