OH radical reactions with ethanolamines: formation of reducing as well as oxidizing radicals

OH radical reactions with ethanolamine, diethanolamine and triethanolamine were studied at pH values below and above the pK_a values of these compounds. The rate constants were found to be lower for the protonated amines than those for their neutral forms. The OH radical reaction led to the formation of both oxidizing, as well as reducing species, as observed by their reactions with methyl viologen and ascorbic acid. The oxidizing species formed by OH radical reaction at the amine site was not found to react with the parent molecules and thereby no secondary yield of reducing species was obtained, as in the case of glycine (except in the case of triethanolamine at pH 9.2).     

Calculations of Two and Three-Body Correlation Entropies at the Freezing Points of Soft-Core Fluids: Effect of the Softness on the Correlation Entropy

Two and three-body correlation entropies of model fluids, in which particles interact each other through the 4th, 6th, 9th and 12th-inverse-power potentials, were calculated from their atomic configurations obtained by molecular dynamics simulations at their freezing points. Besides the soft-core fluid model with the inverse-power potentials, hard-sphere and classical one-component plasma models were employed to provide a comparison with the entropies of the soft-core model. The correlation entropies were plotted as a function of the softness of the potential. These values were also compared with the excess entropies of the hard-sphere and the one-component plasma models at their freezing points.     

Carrier-mediated blends of Chitosan with polyvinyl chloride for different applications

The current work aims at blending of PVC with Chitosan through simultaneous casting of their separate solutions in different proportions of PVC and Chitosan in suitable solvents. After dissolution, both solutions were added to each other while stirring at room temperature. The obtained mixture was left at room temperature to form the blend after evaporation of the solvent. Similar blends have been prepared similarly in presence of the organic ligand, dithizone, as a carrier-mediating material for different metal ions. PVC/Chitosan blends were characterized by thermal (TGA) and FT-IR Spectroscopic analyses as well as scanning electron microscopy (SEM). The obtained blends were found to have reasonable extent of compatibility between their components. Such compatibility depends mainly on the way with which the components have been blended with each other. The polymer-supported dithizone was investigated toward its ability to be used for removal of some metal ions from their aqueous solutions. Concentration of metal ions was determined by ICP-AES analysis.     

DCC/DMAP mediated esterification of hydroxy and non-hydroxy olefinic fatty acids with β-sitosterol:In vitro antimicrobial activity

<正>A new series of fatty alkenoates were synthesized using an appropriate synthetic route involving DCC and DMAP as catalysts. Compounds were characterized by their spectral data.All the synthesized compounds were evaluated for their in vitro antimicrobial activity.The minimum inhibitory concentration(MIC),minimum bacterial concentration(MBC) and minimum fungicidal concentration(MFC) were determined for test compounds as well as for reference standards.Among the compounds tested, compounds having hydroxy group at the fatty acid chain showed the most potent antibacterial as well as antifungal activities.     

Photocatalytic Au–Bi2S3 Heteronanostructures

Au–Bi₂S₃ heteronanostructure photocatalysts were designed in which the coupling of a metal plasmon and a semiconductor exciton aids the absorption of solar light, enhances charge separation, and results in improved catalytic activity. Furthermore, these nanostructures show a unique pattern of structural combination, with Au nanoparticles positioned at the center of Bi₂S₃ nanorods. The chemistry of formation of these nanostructures, their epitaxy at the junction, and their photoconductance were studied, as well as their photoresponse properties.     

Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.     

THE PHOTOPHYSICAL PROPERTIES OF PORPHYCENES: POTENTIAL PHOTODYNAMIC THERAPY AGENTS*

Porphycene and a tetra-n-propyl derivative remained unaltered on irradiation in toluene at room temperature. Quantum yields of fluorescence, S T intersystem crossing, and singlet molecular oxygen sensitization, as well as lifetimes of the singlet and triplet excited states were measured. In view of their structural relationship to porphyrin, their high absorption above 620 nm, their stability towards photooxidation, and their high quantum yields of fluorescence and singlet oxygen sensitization, these compounds qualify as potential agents for tumor marking and photodynamic therapy.     

Asymmetric Synthesis of Pochonin E and F,Revision of Their Proposed Structure,and Their Conversion to Potent Hsp90 Inhibitors

A concise and modular synthesis of pochonin E and F, and their epimers at C‐6 established the correct stereochemistry of these two natural products. Several members of the pochonin family have been shown to bind the heat shock protein 90 (Hsp90), which has been the focus of intense drug discovery efforts. Pochonin E and F as well as their epimers were derivatized into the corresponding pochoximes and further modified at the C‐6 position. Molecular dynamics simulations, docking studies, and Hsp90 affinity measurements were performed to evaluate the impact of these modifications.     

Layered Group(IV) Metal Phosphates as Catalysts for MTBE Synthesis

Layered group(IV) metal phosphates and their phenylsulfonic acid derivatives were used as catalysts for the synthesis of methyl tert-butyl ether (MTBE) from methanol and isobutene. Because zirconium and titanium phosphates have only moderate acidic strength, relatively high temperatures are required to activate their Brønsted acidic sites. The optimal activity was obtained at ca. 443 K. Their phenylsulfonic acid derivatives, however, demonstrated higher acidic strength by giving much higher activity toward MTBE formation at relatively low temperaures. The catalysts were characterized in terms of their structure, thermal stability, surface area and acidic strength.     

Synthesis and characterization of zinc oxide nanoparticles

The research is aimed at synthesis and characterization of nanoscaled zinc oxide particles and their application on linen fibrous supports, for thermal properties. To impart thermal activity to the fibrous nanocomposites, nanoparticles as well as fibrous nanocomposites were produced in different hydrothermal conditions of temperature (90 °C). To characterize the nanoparticles composition, their shape, size, and crystallinity, investigations technique, such as Fourier transformed infrared spectroscopy, scanning electron microscopy, and X-ray powder diffractometry were used. Differential scanning calorimetry analysis profiles were also revealed. The thermal treatment of linen fabrics with nanosized ZnO does not modify significantly their thermal stability.     

Tritium and carbon-14 concentrations around an incinerator for radioactive liquid scintillator waste

Activity measurements of 3H and 14C in several environmental samples around the incinerator for radioactive liquid scintillator waste at the Radioisotope Center, Kyushu University were carried out to estimate their levels. It was indicated that 3H and 14C concentrations in the atmosphere at 1 m from the outlet were about 0.2% of those estimated at the outlet, respectively. At 6 m away from the outlet, 3H concentration decreased to about one twentieth of that at 1 m and 14C concentration to background level. For soils and plants, 14C concentrations showed negligibly low values. The existence of these nuclides in particle form was not confirmed. It is considered that the result of the higher 3H concentrations as compared to 14C concentrations reflects not only the difference of the waste amounts of their nuclides, but also the discharge of 3H as moisture as well as water vapor.     

Apparent Molar Volume and Apparent Molar Expansibility of Lithium,Sodium, Potassium,and Tetramethylammonium Cyclohexylsulfamate in Aqueous Solution

Summary. The apparent molar volume of lithium, sodium, potassium, and tetramethylammonium cyclohexylsulfamate was determined from the density data of their aqueous solutions at 293.15, 298.15, 303.15, 313.15, and 323.15 K. The apparent molar expansibility was calculated from the apparent molar volume at various temperatures. The limiting apparent molar volume and apparent molar expansibility were evaluated and divided into their ionic components. The partial molar ionic expansibilities were discussed in terms of the hydration of the ion in solution, as well as in terms of the hydration effects on the solute as a whole. From the partial molar expansibility of the solute at infinite dilution the partial molar expansibility of the hydration shell was deduced. The coefficients of thermal expansion of the investigated solutions at 298.15 K were calculated and are presented graphically. The density of the investigated solutions can be adequately represented by an equation derived by Root.     

A simple synthesis of novel 2-pyridones from chalcones

Several novel 2-pyridones were synthesized in good yields from a simple one-pot reaction by the condensation of different substituted chalcones and malonamide using sodium ethoxide in ethanol at room temperature. The structures of these 2-pyridones were elucidated from their ¹H, ¹³C and infrared spectral data as well as their elemental analysis. Different 2-pyridones tautomers were obtained as the solvent of crystallization changes.     

Compressive mechanical properties and biodegradability of porous poly(caprolactone)/chitosan scaffolds

Porous polycaprolactone(PCL)/chitosan(CH) scaffolds with large pore sizes and high porosities were fabricated via a particle-leaching technique using hexafluoro-2-propanol as a shared solvent and salt (sodium chloride) particles as porogen. By optimizing processing conditions, numerous PCL/CH scaffolds with CH proportion lower than 50 wt% and similar pore parameters were built. These scaffolds were further evaluated for their compressive mechanical properties and biodegradation behaviors. It was found that their compressive modulus and stress at 10% strain were basically maintained in their dry state in contrast to their individual components, and these scaffolds still showed well-defined compressive characteristics and dimension stability even in their hydrated state compared with pure chitosan scaffolds. After being exposed to PBS or enzymatic degradation systems in vitro for various periods up to 10 weeks, it was observed that degradation of the PCL component could be accelerated at various rates depending on the compositions of the scaffolds and the media, and the chiosan component could effectively buffer the acidic degradation products of the PCL component.     

新型锍鎓盐类光生酸剂的合成及产酸性能研究

成功合成了两种新型锍鎓盐类光生酸剂,其结构经¹1HNMR和MS分析确认,并对其基本物性及在405、365nm光下乙腈溶液中的分解及产酸性能进行了研究,通过计算得出了分解及产酸量子产率.结果表明,两种化合物有较高的热分解温度和在常用有机溶剂中有较好的溶解性;在405nm光源下,4-(9′-苯基蒽基)苯基三氟甲磺酸锍鎓盐(PAGS1)和4-(4′-N,N-二乙基-1′-苯乙烯基)苯基三氟甲磺酸锍鎓盐(PAGS2)的分解量子产率分别为10%和15%,产酸量子产率为8.1%和13%;但在365nm光源下,分解及产酸量子产率均很低,说明两种光生酸剂对于405nm波长的光较敏感,适宜作为405nm光源下的光生酸剂.     

Asymmetric synthesis of pochonin E and F, revision of their proposed structure, and their conversion to potent Hsp90 inhibitors

A concise and modular synthesis of pochonin?E and F, and their epimers at C-6 established the correct stereochemistry of these two natural products. Several members of the pochonin family have been shown to bind the heat shock protein?90 (Hsp90), which has been the focus of intense drug discovery efforts. Pochonin?E and F as well as their epimers were derivatized into the corresponding pochoximes and further modified at the C-6 position. Molecular dynamics simulations, docking studies, and Hsp90 affinity measurements were performed to evaluate the impact of these modifications.     

Supramolecular complex formation of β-cyclodextrin polymer with substituted salicylic acid or 3-hydroxy-2-naphthoic acid and their electrorheological behaviors

According to the chemical design, electrorheological properties of supramolecular complex from β-cyclodextrin polymer (β -CDP) were discussed. Six supramolecular complexes of β-cyclodextrin polymer with substituted salicylic acid and 3-hydroxy-2-naphthoic acid were synthesized by the solid-phase self-assembly method, and their component and structure were characterized by NMR, FT-IR, UV-vis and the fluorescence analysis. Then the electrorheological properties of their suspensions in silicone oil were investigated under DC electric fields. It was found that the yield stresses of these supramolecular complex ER fluids were 7.3–9.8 kPa at 4 kV/mm in DC electric field, which were enhanced by 34%–72% compared with that of pure β-CDP. Among them, that of β-CDP/3-hydroxy-2-naphthoic acid ER fluid was the highest. It was also found that the ER effect of supramolecular complexes can be controlled by changing different guests. When the substituted group is at phenyl ring, ER behavior can be slightly adjusted by the different substituted groups, their number as well as their position at phenyl ring. This can be proved by the measurement of dielectric properties.     

Efficient halogen-lithium exchange reactions to functionalize poly(alkyl aryl ether) dendrimers

Poly(alkyl aryl ether) dendrimers were functionalized with bromophenyl groups at their peripheries, so as to have 3, 6, 12, and 24 groups in the zero, first, second, and third generation dendrimers, respectively. The new bromophenyl functionalized dendrimers were assessed for their reactivities in C-heteroatom and C-C bond forming reactions. For this purpose, the bromophenyl functionalized dendrimers were converted quantitatively to their polylithiated derivatives, using n-BuLi in benzene. The polylithiated dendrimers were reacted either with D₂O or with CO₂, so as to afford the corresponding deuterated and carboxylic acid functionalized dendrimers, respectively. The carboxylic acid functionalized dendrimers were modified further to the methyl esters during their characterization.     

Apparent Molar Volume and Apparent Molar Expansibility of Lithium, Sodium, Potassium, and Tetramethylammonium Cyclohexylsulfamate in Aqueous Solution

The apparent molar volume of lithium, sodium, potassium, and tetramethylammonium cyclohexylsulfamate was determined from the density data of their aqueous solutions at 293.15, 298.15, 303.15, 313.15, and 323.15 K. The apparent molar expansibility was calculated from the apparent molar volume at various temperatures. The limiting apparent molar volume and apparent molar expansibility were evaluated and divided into their ionic components. The partial molar ionic expansibilities were discussed in terms of the hydration of the ion in solution, as well as in terms of the hydration effects on the solute as a whole. From the partial molar expansibility of the solute at infinite dilution the partial molar expansibility of the hydration shell was deduced. The coefficients of thermal expansion of the investigated solutions at 298.15 K were calculated and are presented graphically. The density of the investigated solutions can be adequately represented by an equation derived by Root.     

Synthesis of poly(propyl ether imine) dendrimers and evaluation of their cytotoxic properties

In this paper, we report the synthesis of several poly(propyl ether imine) dendrons and dendrimers. These dendrons and dendrimers were constructed by involving an ether as the linker component and an imine as the branching component. The divergent syntheses of dendrons and dendrimers were established with the aid of two alternate Michael addition reactions and two alternate reduction reactions in a four-step iterative synthetic sequence. Dendrons up to three generations were synthesized and some of the dendrons were attached to a benzenoid core so as to obtain dendrimers up to two generations containing 12 carboxylic acids at the periphery. Divergent synthesis involving ether as the core was found to be more facile, and dendrimers up to three generations having 16 carboxylic acids at the periphery were achieved in good to excellent yields in each individual step. The adopted synthetic sequence allows us to install either alcohol, an amine, or a carboxylic acid at their peripheries. The carboxylic acid-terminated dendrons and dendrimers were evaluated as to their cytotoxic properties, and while most dendrons and dendrimers did not exhibit any measurable cytotoxicity, even up to 100 microg/mL, the second-generation dendrimer with the benzenoid core exhibited a mild toxicity at concentrations above 30 microg/mL.