Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

X-ray guided H NMR analysis of pinched cone calix[4]arenes

The analysis of structural parameters of azobenzene- and stilbene-bridged calix[4]arene obtained from AM1 calculation are in good agreement with those obtained from X-ray crystallography. The bridge longer than 9.0 Å such as p,p-trans-azobenzene and p,p-trans-stilbene cannot be constructed over the narrow rim of calix[4]arene through two ethylene oxide linkers. The m,m-stilbene bridge is the most promising photo switch because its shorter cis stereoisomer (5.85 Å) allows calix[4]arene to assume the perfect cone conformation, whilst its longer trans stereoisomer (8.00 Å) forces calix[4]arene to adapt a pinched cone conformation. The pinched cone conformation has longer distances between the neighbouring phenoxyl groups causing the weaker intramolecular hydrogen bonding and the upfield shifts of the phenolic proton signals to below 7.00 ppm. This upfield shift is useful for quick identification of pinched cone conformation of new calix[4]arene compounds.     

Dendritic octa-CMPO derivatives of calix[4]arenes

Calix[4]arenes substituted at the narrow or wide rim by eight carbamoylmethyl-phosphine oxide (CMPO) functions in a dendritic manner were synthesised and studied in extraction of Eu³⁺ and Am³⁺ from aqueous nitric acid into o-nitrophenylhexyl ether. ¹H NMR relaxivity titrations for a wide rim octa-CMPO reveal the clear formation of a solvent-free 1:2 ligand/metal complex, while the wide rim tetra-CMPO formed oligomeric complexes under similar conditions.     

Design and synthesis of new polyphosphorylated upper-rim modified calix[4]arenes as potential and selective chelating agents of uranyl ion

New upper-rim polyphosphorylated calix[4]arenes were designed for decorporation of uranium in case of nuclear contamination. A ligand system containing four preorganized 1-hydroxymethylene-1,1-bisphosphonic acid moieties anchored onto a calix[4]arene platform has been developed. Three calix[4]arene-bisphosphonates were efficiently prepared in multi-step syntheses with a variable carbon chain length between the bisphosphonate and the calix[4]arene. Affinity constants towards uranyl ion were determined and compared with those of bis(HEDP) and tris(HEDP) phosphonates, known as efficient ligands for uranyl.     

Synthesis of upper rim calix[4]arene divalent glycoclusters via amide bond conjugation

Synthetic routes for linking two sugar units at the upper rim of cone calix[4]arenes, through the formation of amide bonds, have been explored. Steric effects prevent the coupling of calix[4]arene dicarboxylic acid with simple aminoglycosides, whereas the corresponding reaction with carbohydrates bearing a two or three carbon atoms spacer, terminating with a primary amino group, allows the synthesis of several difunctionalized calix[4]arene neoglycoconjugates, attractive in chemical glycobiology and supramolecular chemistry.     

Efficient synthesis of water-soluble calix[4]arenes via thiol-ene “click” chemistry

Several water-soluble calix[4]arenes were synthesized via radical addition reaction between thiols and alkenes under UV lamp irradiation (λ= 365 nm) in good yields. The structures of these compounds synthesized herein were fully confirmed by 1H NMR, ESI-MS and elemental analysis.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Head-to-tail connected double calix[4]arenes

Summary New macrotricyclic compounds consisting of two calix[4]arene substructures connected by aliphatic chains of various length (three to five carbon atoms) between two oppositep-positions and two distal phenolic oxygens have been synthesized. Starting withp-tert-butyl-calix[4]arene, two O-protected phenolic units are attachedvia ether links in 1,3-position by reaction with the corresponding tosylates. After deprotection, the new calix[4]arene is formed by fragment condensation with 2,6-bisbromomethylated 4-alkylphenols. The structure of one example (8c) has been confirmed by single crystal X-ray analysis. Both calixarene parts assume the cone conformation, a molecule of acetonitrile being included in both cavities.

---

Doppelte Calix[4]arene in Kopf-Schwanz-Verknüpfung

Zusammenfassung Neue makrotricyclische Verbindungen, in denen zwei Calix[4]aren-Einheiten durch aliphatische Ketten unterschiedlicher Länge (drei bis fünf C-Atome) zwischen zwei gegenüberliegendenp-Positionen und zwei gegenüberliegenden Phenolsauerstoffen verknüpft sind, wurden hergestellt. Ausgehend vonp-tert-Butyl-calix[4]aren werden zunächst zwei O-geschützte Phenolbausteine in 1,3-Stellung durch Umsetzung mit den entsprechenden Tosylaten etherartig gebunden. Nach Abspaltung der Benzylether-Schutzgruppe wird durch Fragmentkondensation mit 2,6-bisbrommethylierten 4-Alkylphenolen das neue Calix[4]aren gebildet. Für8c wurde die Struktur durch Einkristallröntgenstrukturanalyse bestätigt. Beide Calixarenteile nehmen diecone-Konformation ein, wobei in die beiden Hohlräume je ein Molekül Acetonitril eingeschlossen wird.

     

Sorption of heavy metal ions by silica gel-immobilized, proton-ionizable calix[4]arenes

Silica gel-immobilized, di-ionizable calix[4]arenes are employed as stationary phases in ion-exchange chromatography for selected heavy metal ions. Sorption efficiencies for Pb²⁺ are dependent on the structure of the calix[4]arene ligand and the linker that joins the ligand to the silica gel, as well as the acidity of the sample solution. Although the resins exhibit only poor sorption of Cd²⁺, they are found to be scavengers for Hg²⁺. Competitive sorption studies are conducted with selected resins.     

杯[4]芳烃衍生物的合成和构象研究

以对取代酚亚甲基桥三聚体和２，６－二溴甲基对取代酚为原料，在ＴｉＣｌ４催化下环化得到６种新的含不同取代基［Ｃｌ，Ｂｒ，ＣＨ３，Ｃ（ＣＨ３）３］的杯［４］芳烃衍生物，核磁共振谱研究表明：它们在溶液中的优势构象为锥形构象。     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

逐步法合成杯[4]芳烃关环反应的改进

对位带有3种或4种不同取代基的杯「4］芳烃一般通过逐步合成法合成．50年代后期,wS和Hllfl比rI'·'a就用［1十1十1十工］的逐步法9步合成出了杯［4］芳烃,总产率相当低·1979年B6hmer等［'·'报道用对位取代酚的线型三聚体与2,6一双溪甲基对取代酚在乙酸中进行关环反应合成杯［4」芳烃,这种［3＋l」的逐步法只需3步连续反应就能合成带有3种不同取代基的杯卜」芳烃,但最后。步关环产率仍然很低（2％、15％）［"．后来＊dhmeTD'等将关环反应改进为在TICI。／二氧六环体系中进行,产率有所提高,这种逐步法曾用于不对称杯［4」芳烃的…     

Mercuration of calix[4]arenes immobilized in the 1,2- and 1,3-alternate conformations

Calix[4]arenes immobilized in the 1,2-alternate and 1,3-alternate conformations were directly mercurated using Hg(TFA)₂. The reaction regioselectivity was compared with the thermodynamic stability of the corresponding products obtained by theoretical calculations (wB97XD/def2tzvp method). Both experimental and theoretical data suggest that para substitution is slightly preferred over meta attack for the 1,2-alternate conformer, while in the case of the 1,3-alternate conformation the situation is reversed. The usefulness of the mercury intermediates was demonstrated by the synthesis of a rigid upper-rim-bridged calixarene in the 1,2-alternate conformation possessing a highly distorted cavity. A simple transformation of the organomercury compounds afforded the corresponding iodo derivatives, which are potentially applicable as building blocks for further synthesis. Moreover, many products are inherently chiral representing unique substitution patterns inaccessible by common “mercury-free” chemistry.     

The synthesis of metallocene calix[4]arenes

The condensation of 1,1-bis(chlorocarbonyl)metallocenes andp-tert-butylcalix[4]arene in toluene leads to novel metallocene calix[4]arenes in which the metallocene subunit bridges the opposite hydroxy groups of the parent calixarene.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

Efficient synthesis of amino-protected calix[4]arenes selectively functionalized with iron chelator ICL670 designed as platform for iron recognition

The development of selective electrochemical iron sensor is still a challenging task. One promising possibility is to use organically functionalized inorganic particles, for instance silica, as sensitive element. Herein, we report on the design and synthesis of calix[4]arene-based platforms modified with ICL670 iron chelator and alkylamino chain(s). These new molecular edifices could be easily grafted on silica particles. The strategy relies on selective calix[4]arenes functionalizations by alkylamino chains at the lower rim, in partial-cone or 1,3-alternate conformations. The different synthesis routes are presented and discussed.     

Functionalized thiacalix- and calix[4]arene-based Ag ionophores: synthesis and comparative NMR study

Thiacalix[4]arene ionophores comprised of cyclic or linear O,S,N ligating and/or π-coordinate groups on the lower rim were synthesized and their Ag⁺ binding was studied by ¹H NMR methods in comparison with the respective known and novel calix[4]arene counterparts. Calix[4](O,S,N)crowns were found stronger binders than the π-coordinate molecules and thiacalixarene ionophores were generally superior to calixarenes. This study helped to develop silver ion-selective electrodes working in the subnanomolar region.     

New preorganized calix[4]arenes. Part I. A doubly-crowned calix and a double-calixcrown derived from 4,6,10,12,16,18,22,24,25,26,27,28-Dodecamethyl-5,11,17,23-tetrahydroxycalix[4] arene

A doubly-crowned calix and a double-calixcrown derived from 4,6,10,12,16,18,22,24,25,26,27, 28-dodecamethyl-5,11,17, 23-tetrahydroxycalix[4]arene (1) have been prepared by reaction of appropriate oligoethylene glycol ditosylates with (1) in acetonitrile in the presence of potassium carbonate. A potassium template effect is observed during one of the double cyclizations.     

A new fluorescent double-cavity calix[4]arene: synthesis and complexation studies toward nitroanilines

A novel bicyclic calix[4]arene (4) molecular receptor has been synthesized, and its sensory abilities toward noxious aromatic nitroamines evaluated in apolar media. Molecular host–guest interactions examined through fluorescence and ¹H NMR spectroscopies showed the formation of 1:1 type endo-inclusion complexes with all the nitroaniline guests. The potential of 4 as a chemical sensor is established.     

A novel calix[4]arene-based neutral semicarbazone receptor for anion recognition

A series of novel calix[4]arene-based neutral semicarbazone and thiosemicarbazone receptors have been synthesized and characterized. The molecular receptor 4a recognizes in preference to other anions (Cl⁻, Br⁻, I⁻, , and ) through a 1:1 binding-stoichiometry.     

Studies on the syntheses and properties of boronoalkoxy calix [ 4 ] arenes

New boronoalkoxycalix[4]arenes were synthesized by allylation, alkylation, hydroboration and hydrolysis of 25,26,27,28-tetrahydroxycalix[4]arene, and identified by elemental analysis, IR, 1H NMR, 13C NMR, 11B NMR, MS and UV spectra. The data of UV and fluorescence spectra showed that tctrapropoxycalix-[4]arene triboronic acid could coordinate significantly with monosaccharides.