Synthesis of bridgehead hydroxy bicyclo[2.2.2]octane derivatives

Two independent synthetic routes, starting from 1,3-cyclohexadione, toward the 4-hydroxy bicyclo[2.2.2]octane-2,6-dione derivative 3 are described.     

Synthesis of crownophane with the bicyclo[2.2.2]octane core

Russian Chemical Bulletin -     

Asymmetric sequential Michael reaction: Synthesis of optically active bicyclo[2.2.2]octane derivatives

The sequential Michael reaction of (S)-4,5-di-O-isopropylidenepent-2- enoate and with lithium enolate afforded diastereo- and enantioselectively bicyclo[2.2.2]octane and (or ), respectively. The adducts were efficiently converted into both enantiomeric keto aldehydes (−)- and (+)- .     

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings

Polyesters containing bicyclo[2.2.2]octane and bicyclo[3.2.2]nonane rings are prepared from 1,4-bis(carboethoxy)bicyclo[2.2.2]octane, 1,4-bis(hydroxymethyl)bicyclo[2.2.2]-octane and the 1,5-disubstituted bicyclo[3.2.2]nonane analogs. These polyesters are compared to the related polymers containing 1,4-phenylene and trans-1,4-cyclohexylene rings in terms of their melting point, thermal stabilities and oxidative stabilities. The lower symmetry of the bicyclo[3.2.2]nonane ring produces lower-melting polymers than the other ring systems. The remaining three rings are approximately equivalent in their effect on the melting point of a polymer provided that no more than one bicyclo[2.2.2]octane ring is present per polymer repeat unit. Two such rings produce a highermelting polymer than any other combination. Both the thermal and oxidative stabilities of the polyesters is improved by the presence of the bicyclo rings. This is attributed to the rings providing an approximation of a ladder polymer.     

Enantioselective synthesis of bridgehead hydroxyl bicyclo[2.2.2]octane derivatives via asymmetric allylindation

A recent new strategy for the transformation of mono-dioxolane protected 1,3-cyclohexadione into bridgehead hydroxyl bicyclo[2.2.2]octane derivatives, based on allylindation followed by ozonolysis and intramolecular aldol addition, was modified to include asymmetric allylindation. This enabled the first enantioselective synthesis of (1R,4R,6S)-endo-4-(tert-butyl-dimethyl-silyloxy)-6-hydroxy-bicyclo[2.2.2]octan-2-one and (1S,4S,6R)-endo-4-(tert-butyl-dimethyl-silyloxy)-6-hydroxy-bicyclo[2.2.2]octan-2-one in high enantiomeric excess. Issues concerning the non-reproducibility of the asymmetric allylindation were also addressed.     

The electronic structure of bicyclo [2.2.1] heptane and of bicyclo [2.2.2] octane

An ab initia SCF-LCAO-MO study of bicyclo [2.2.1] heptane(I) and of bicyclo [2.2.2] octane(II) has been performed. The electronic structure and the nature of the molecular orbitals and of the bonds have been analyzed. Interactions between fragment orbitals may be recognized. The bridgehead C-H bonds interact dominantly “through-space” in I and “through-bond” in II. Some relations between electronic structure and molecular properties are discussed.     

Synthesis of 1,4-diazabicyclo[2.2.2]octane

Double intramolecular cyclization of N,N-bis(2-chloroethyl)-N-N-bis(2-cyanoethyl)ethylenediamine leads to 1,4-bis(2-cyanoethyl)-1,4-diazoniabicyclo[2.2.2]octane dichloride, which undergoes decyanoethylation to 1,4-diazabicyclo[2.2.2]octane when it is heated. The structures of the compounds were confirmed by their IR and PMR spectra.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 548–550, April, 1978.     

Synthesis and characterization of poly(benzazoles) containing the bicyclo[2.2.2]octane moiety

Poly(benzobisoxazoles) (PBOs), poly(benzobisthiazoles) (PBTs) and copolymers thereof containing the 2,5-dihydroxybicyclo[2.2.2]octane moiety have been prepared and studied. The homopolymers were synthesized by the polycondensation of 2,5-dihydroxybicyclo[2.2.2]octane-1,4-dicarboxylic acid with 4,6-diamino-1,3-benzenediol dihydrochloride or 2,5-diamino-1,4-benzenedithiol dihydrochloride in poly(phosphoric acid). Random and block copolymers (PBO–PBT) were also prepared. The polymers were characterized by solubility, X-ray diffraction, spectroscopy (infrared and solid-state ¹³C nuclear magnetic resonance), and thermal analysis such as differential scanning calorimetry and thermogravimetric analysis. Thermogravimetric analysis showed thermal stability of the polymers above 375°C in air and under argon atmosphere. The polymers exhibited high resistance to organic and inorganic solvents. The polymers were converted to the more stable aromatic polymers via dehydration and retro Diels–Alder reactions of the 2,5-dihydroxybicyclo[2.2.2]octyl moiety by pyrolysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 277–281, 1998     

Thermal behaviour of some dibenzobicyclo[2.2.2]octane derivatives

A number of dibenzobicyclo[2.2.2]octane derivatives have been studied due to the interest of such compounds as ligands for coordination compounds with potential biological activity. Their thermal behaviour has been analyzed in order to find out more information about their fragmentation. A connection between the bridge substituents and the fragmentation process has been observed.     

Manifestations of the Alder-Rickert reaction in the structures of bicyclo[2.2.2]octadiene and bicyclo[2.2.2]octene derivatives

The Alder-Rickert ethylene extrusion reaction manifests in the ground state structures of compounds 9-12 which contain the bicyclo[2.2.2]octadiene moiety and compounds 13, 14, and 17-20 which contain the bicyclo[2.2.2]octene moiety. A significant decrease of the 13C-13C one-bond coupling constants for the C-C bonds, which break in this fragmentation reaction, suggests lengthening, and hence weakening of these bonds. In the unsymmetrical systems these effects are also shown to be associated with strengthening of the CH2-CH2 bond, which is ultimately lost from the molecule as ethylene. Low-temperature crystal structures of compounds 9-12 and 16 provide evidence for similar crystal packing requirements of the CH2-CH2 and CH=CH moieties.     

Carbon-13 chemical shifts of bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives

¹³C chemical shifts of more than fifty bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives (hydrocarbons, alcohols, ketones and esters) have been determined. The usefulness of ethyl derivatives for the assignment of close ¹³C chemical shifts in bicyclic methyl derivatives is shown both for the bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane series. Comparison of substituent effects on α-, β-, γ- and δ-carbons in both series of compounds shows remarkable differences in steric interactions. In contrast to the rigid bicyclo[2.2.1]heptane system, both chair and boat conformations can be predominant in the bicyclo[3.2.1]octane series with the conformationally flexible 6-membered ring.     

Unusual ring-chain tautomerism in bicyclo[4.2.0]octane derivatives

A new type of ring-chain tautomerism, which consists of the reversible conversion of bicyclo[4.2.0]octane derivatives into trisubstituted enamines was found and studied by ¹H NMR spectroscopy. The starting materials were prepared by the stereoselective reaction of (E)-3,3,3-trichloro-1-nitropropene with cyclohexanone enamines.     

Synthesis of 5,6-benzo-1,2-diazabicyclo [2.2.2]octane

5,6-Benzo-1,2-diazabicyclo[2.2.2]octane was synthesized by nitrosation of 1,2,3,4-tetrahydrocinchoninic acid, reduction of the 1-nitroso derivative to 1-amino-1,2,3,4-tetrahydrocinchoninic acid, cyclodehydration of it to 3-oxo-5,6-benzo-1,2-diazabycyclo[2.2.2]octane, and reduction of the oxo group to a methylene group with lithium aluminum hydride.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1369–1371, October, 1970.     

1-氮杂环[2.2.2]辛烷的高效合成

将4-（2-羟乙基）哌啶蒸汽在425 ℃下通过CNM-3型固体酸催化剂进行分子内脱水反应,一步合成了目的产物1-氮杂环[2.2.2]辛烷（奎宁环）,4 h内25 g 4-（2-羟乙基）哌啶蒸汽单程收率可达76.8%,最高收率84.3%。 该方法原料易得,适合于奎宁环的工业化制备。     

Synthesis and properties of novel oligothiophenes surrounded by bicyclo[2.2.2]octene frameworks

Novel oligothiophenes surrounded by bicyclo[2.2.2]octene (abbreviated as BCO) frameworks ranging from dimer to hexamer, 1(nT) (n = 2, 3, 4, 6), were prepared, and their structures and electronic properties were investigated. Dimer 1(2T) was synthesized by oxidative coupling of the 2-lithiated monomer generated from 4,5-BCO-annelated 2-bromothiophene 8 with CuCl2 in 76% yield. Trimer 1(3T) and tetramer 1(4T) were synthesized by Stille coupling of 2,5-dibromo-3,4-BCO-annelated thiophene 4 and of the 5,5'-dibromo derivative of bis(3,4-BCO-thiophen-2-yl) 10 with 2-stannylated 4,5-BCO-annelated thiophene 9 in 41% and 46% yield, respectively. Hexamer 1(6T) was synthesized by oxidative coupling of terthiophene 12, tris-annelated with BCO units, in 81% yield. X-ray crystallographic studies showed that the thiophene rings in 1(2T) and 1(3T) are rotated around the inter-ring C-C bond(s) with the C=C-C=C dihedral angles of -174.3(5) degrees for 1(2T) and -149.7(3) degrees and 34.4(3) degrees for 1(3T). In the crystal structures of 1(2T) and 1(3T), no pi-stacking was observed as expected from the steric effect of the BCO units. Theoretical calculations for 1(2T) and 1(3T) at the B3LYP/6-31G(d) level indicated that the annelation with BCO units either at the 2,3- or 3,4-positions of thiophene rings raises both the KS HOMO and LUMO levels. In the electronic absorption spectra of 1, the longest wavelength absorption band corresponding to the pi-pi transition is bathochromically shifted with the increase in absorption intensity as the number of thiophene rings increases, and the absorption of the polythiophene 1 with infinite length was predicted to be 419 nm. The cyclic voltammetry of 1 in CH2Cl2 at -78 degrees C (2T) or at room temperature (3T, 4T, 6T) showed two reversible oxidation waves, indicating that the radical cation and dication of 1 are stable under these conditions.