Aminolysis of p-tert-butyltetrathiacalix[4]arene tetraethylacetates in cone, partial cone and 1,3-alternate conformation: synthesis of amide based receptors for oxyanions

Cone, partial cone and 1,3-alternate conformers of tetrathiacalix[4]arene tetraethylacetate were synthesized and subjected to aminolysis with alkyl amines [CH₃(CH₂)_nNH₂; n=2, 3, 5] to yield mono-, di-, tri- or tetrasubstituted p-tert-butyltetrathiacalix[4]arene amides which were characterized by detailed analysis of their NMR spectral and single crystal X-ray crystallography. It has been observed that while the 1,3-alternate and cone conformers of the tetrathiacalix[4]arene tetraethylacetate gave corresponding tetrathiacalix[4]arene tetraamides under different experimental conditions, the corresponding partial cone conformer undergoes a cascade of regioselective reactions with the same amines. Variable temperature ¹H NMR experiments allowed the determination of relative stability of different conformers within the temperature range of 298-333 K. The synthesized derivatives were evaluated as molecular extractants for cations and anions and were determined to facilitate extraction of oxyanions (CrO₄²⁻ and Cr₂O₇²⁻) from aqueous to the organic phase. The studies have a significance in the design of tetrathiacalix[n]arene based molecular receptors for innovative applications.     

New bifunctional compounds obtained by selective hydrolysis of tetrathiacalix[4]arene tetraethyl esters with Cs2CO3

A new strategy for the synthesis of bifunctional compounds, based on 1,3-alternate tetrathiacalix[4]arene precursors functionalized by pairs of carboxylic acid and ester groups located on opposite sides of the macrocycle platform is described. These building blocks were prepared by the Cs₂CO₃ induced selective hydrolysis of tetrathiacalix[4]arene tetraester derivatives. A mechanism for the selective hydrolysis is suggested. The structures of the compounds are elucidated by NMR spectroscopic analysis and X-ray single crystal diffraction.     

Synthesis of hydrazones containing sterically hindered phenol groups and tetrathiacalix[4]arene fragment

1,3-Alternate and cone stereoisomers of tetrathiacalix[4]arene and 4-tert-butyltetrathiacalix[4]arene functionalized by carbohydrazide groups reacted with 3,5-di-tert-butyl-4-hydroxybenzaldehyde to give the corresponding hydrazones having sterically hindered phenol fragments.     

Mercury(II) and silver(I) receptors based on tetrathiacalix[4]arene hydrazones

The extraction ability of phenyl hydrazone derivatives of cone- and 1,3-alternate tetrathiacalix[4]arenes towards to some alkali, alkaline earth, transition and heavy metal ions has been investigated by picrate extraction method. The synthesized cone-tetrathiacalix[4]arene hydrazones show a high efficiency coupled with an excellent selectivity towards for Ag⁺ and Hg²⁺ ions. The stoichiometry of complexes and the extraction constants have been determined. The influence of calix[4]arene platform’s structure and the electron donor substituents in phenyl fragments on the extraction efficiency has been discussed.     

Molecular Recognition Properties of Biphen[4]arene

Biphen[n]arenes (n=3, 4) are a new family of macrocyclic hosts. Here, we describe the molecular recognition behavior of hydroxylated biphen[4]arene (OHBP4) for the first time. A series of cationic guests with different sizes and shapes, including quaternary ammonium salts ( 1? PF₆ and 2? PF₆), pyridinium‐based guests ( 3? 2 PF₆– 6? 2 PF₆), and cobaltocenium hexafluorophosphate ( 7? PF₆), were chosen as model guest molecules. OHBP4 exhibits good selectivity towards the 2,7‐dibutyldiazapyrenium bis(hexafluorophosphate) ( 4? 2 PF₆) axle to form a [2]pseudorotaxane‐type complex. In contrast, hydroxylated biphen[3]arene (OHBP3) cannot bind with this big guest. In addition, OHBP4 strongly interacts with adamantane derivative 2? PF₆ and cobaltocenium 7? PF₆, which have tridimensional shape and relatively large size. The association constant of the 7 ⁺?OHBP4 complex in 1:1 (v/v) [D₆]acetone/CD₂Cl₂ solution is up to 3100±300 m ^?1.     

Quantum chemical study of the self-assembly of tetrathiacalix[4]arenes and their oxygen analogs functionalized by hydrazide groups

The self-assembly of tetrathiacalix[4]arene and tetraoxacalix[4]arene molecules functionalized by hydrazide groups was studied by DFT calculations at B3LYP/6-31G(d,p) level. The calculations were performed for the cone and 1,3-alternate conformations. The associates of calix[4]arenes in the cone conformation are stabilized by multiple hydrogen bonds with inclusion of all hydrazide groups in the formation of the globule, which suppresses the formation of extended structures.     

Synthesis of new hydrazones based on tetrathiacalix[4]arene in the 1,3-<Emphasis Type="Italic">alternate</Emphasis> conformation

Reactions of 1,3-alternate stereoisomers of tetrathiacalix[4]arene and 4-tert-butyltetrathiacalix[4]-arene, functionalized by hydrazide groups, with benzaldehyde and pyridin-2-carbaldehyde gave new tetrathiacalix[ 4]arene tetrahydrazone derivatives as promising receptors for transition and toxic heavy metal ions.     

Improvement of selective d-cation binding by tetrathiacalix[4]arene hydrazides: synthesis and extraction properties

New de-tert-butyltetrathiacalix[4]arenes with acetylhydrazide substituents in cone and 1,3-alternate conformations have been synthesised with good yield by the hydrazinolysis of calix[4]arene ester derivatives. The recognition ability of synthesised macrocycles towards transition and alkali metals has been investigated by the picrate extraction method. The stoichiometry of complexes and the extraction constants have been determined. It has been found that tetrahydrazides do not extract alkali metal ions, but show an excellent affinity towards transition and heavy metal cations. The 1,3-alternate conformer of de-tert-butyltetrathiacalix[4]arene has revealed a remarkable selectivity for Ni²⁺ and Ag⁺ in the row of d-elements and for Cd²⁺ ion among the toxic heavy metals. The experimental data show that the removal of tert-butyl groups from tetrathiacalix[4]arene framework leads to the drastic improvement of extraction efficiency and selectivity of new tetrahydrazides.     

(1+1) or (2+2) Coupling for bis(tosyloxyethoxy)benzenes with calix[4]arene and thiacalix[4]arene

As bifunctional reagents, bis(tosyloxyethoxy)benzenes can react with p-tert-butylcalix[4]arene or p-tert-butylthiacalix[4]arene to afford intramolecularly bridged (1+1) or intermolecularly bridged (2+2) products. It was found that the bridging pattern strongly depended on the structure of bis(tosyloxyethoxy)benzene and the kind of calixarene. For the ortho-isomer of bis(tosyloxyethoxy)benzene, intramolecularly bridged calix[4]arene and thiacalix[4]arene were the main products. For the para-isomer, the bridging reaction was in a (2+2) fashion. As for the meta-isomer, double thiacalix[4]arene and intramolecularly bridged calix[4]crown were synthesized.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Regioselective Synthesis and Inclusion Properties of distal-Bis[(2-pyridylmethyl) oxy]tetrathiacalix[4]arenes

Regioselective synthesis of bis[(2-pyridylmethyl)oxy]tetrathiacalix[4]arenes was accomplished by a protection–deprotection method using benzyl groups as a protecting group. The conformational studies of distal-bis[(2-pyridylmethyl)oxy]thiacalix[4]arenes in solution and solid state are described. The two-phase solvent extraction data indicated that bis[(2-pyridylmethyl)oxy]tetrathiacalix[4]arenes show strong Ag⁺ (E%, 97%) affinity. In contrast, no significant E% is observed for K⁺. A good Job plots proves 1:1 coordination of 1,3-alternate -3 with Ag⁺ cation. ¹H-NMR Titration of 1,3-alternate- 3 with AgSO₃CF₃ also clearly demonstrates that a 1:1 complex is formed with retention of the original symmetry. The conformational changes of pyridine moiety from the original outward orientation of the ring nitrogen to the inside orientation toward the thiacalixarene cavity were observed in the process of Ag⁺ complexation. The down-field shifts of the benzene protons of the benzyl group were also observed and attributed to the conformational deviation from the original face to face overlapping.     

Synthesis of calix[4]arene(amido)monocrowns and their photoresponsive derivatives

A series of new calix[4]arene(amido)mono-crown compounds have been synthesized through aminolysis of calix[4]arene esters and intramolecular cyclization of the intermediates. The title compounds were converted into their nitro and azo substituted derivatives to provide novel photoresponsive molecular receptors for transition metal ions. Single crystal X-ray analysis of calix[4]arene(ethyleneamido)mono-crown (2a) revealed that the compound is present in a cone conformation with an amido loop that caps the lower rim of calix[4]arene cavity to result in stacking along axis a and axis c to provide supramolecular aggregates in the solid state. Evaluation of synthesized macrocycles in the solution phase for recognition of transition metal cations (Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Pb²⁺, Hg⁺, Hg²⁺, Pd²⁺, and Pt²⁺) by UV-visible spectroscopy revealed that p-tert-butyl-calix[4]arene mono-(amidocrown) 1c selectively shows a blue shift at 38 nm on interaction with Hg⁺ ions.     

The enhancement of luminescent properties of Tb3+ complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold

This is the first report on the synthesis and characterization of tetra-1,3-diketone derivatives of tetrthia- and calix[4]arenes substituted by acetylacetonyl or dipivaloylmethanyl moieties at the upper rim and bearing hydroxyl groups at the lower rim as ligands for Tb³⁺ complexes. The spatial structure and tautomeric content for the synthesized ligands have been determined by means of X-ray, IR and NMR spectroscopy. Comparison of the sensitizing properties of tetrathiacalix[4]arenes and their calix[4]arene analogues on the Tb³⁺-centered luminescence in DMF solutions has been performed. A substantial enhancement of the luminescent properties of Tb³⁺- complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold was established.     

Asymmetric calix[4]-thiacalix[4]arene tubes: Synthesis and ionophore properties

Asymmetric p-tert-butylcalix[4]-p-R-thiacalix[4]arene tubes (R = tert-Bu, H, 1-adamantyl) were prepared for the first time by reaction of tosyloxyethoxy derivative of p-tert-butylcalix-[4]arene and the corresponding p-R-thiacalix[4]arenas in acetonitrile in the presence of K₂CO₃. Complex formation of compounds obtained with sodium, potassium, and rubidium iodides in CDCl₃-CD₃OD, 4:1, was studied by means of ¹H NMR. The ionophore properties of the molecule were governed by the character of substituents on the upper rim of the thiacalixarene fragment, and only the molecular tube containing a fragment of the p-(1-adamantyl)-thiacalix[4]arene quantitatively bound potassium ions (quickly) and rubidium ions (slowly).     

Synthesis and Structure of a 1,3-alternate-Thiacalix[4]arene diamide Derivative

A novel receptor possessing two complexation sites and bearing 1,3-alternate conformation based on thiacalix[4]arene, confirmed by single crystal X-ray analysis, was prepared. The tetrathiacalix[4]arene diamide shows strong intramolecular hydrogen bonding. The binding behavior towards K⁺ and halides has been examined by ¹H NMR titration experiments.     

Synthesis of Schiff Base Calix [4] arene Crowns

This letter reports the synthesis of Schiff base calix [4] arene crowns containing m-xylylene phenol subunit, in which calix [4] arene Schiff base crowns 2a,2b and 2c were formed by 1:1 condensation of calix [4] arene diamine 1 with dialdehydes (2,6-diformyl-4-chlorophenol 3a,2,6-diformyl-4-methylphenol 3b,2,6-diformyl-4-tert-butylphenol 3c)under high dilute condition in refluxing anhydrous ethanol in 65-70% yield.     

The conformation and dynamic behaviour of tetrathiacalix[4]arenes functionalized by hydrazide and hydrazone groups

The ¹H, ¹³C and ¹⁵N NMR data, conformation and dynamic behaviour of the new tetrathiacalix[4]arenes functionalized by hydrazide and hydrazone groups are reported and compared with the result of earlier investigations of 4-tert-butylphenoxyacetylhydrazones. The unusual fact of formation of N,N′-diacetylhydrazine bridge and factors leading to its formation in the cone conformer of calixarene has been discussed. The barriers of rotation of hydrazone fragments of tetrathiacalix[4]arenes were determined by NMR-measurements at various temperatures. The structure of 1,3-alternate conformer of 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis[hydrazinocarbonylmethyl]-2,8,14,20-tetrathiacalix[4]arene in solution is compared with crystal structure obtained by the X-ray analysis.     

Synthesis, structure, and conformation of ortho-linked oxacalix[n]arene[n]hetarenes

ortho-Linked oxacalix[n]arene[n]hetarenes (n=2, 3) were prepared by one-step cyclooligomerization of catechol and meta-dichlorinated nitrogen containing heterocycles or via a two-step reaction process. Solid state structure of the ortho-linked oxacalix[n]arene[n]hetarenes (n=2, 3) has been determined by X-ray crystallography. 1,3-Alternate and 1,3,5-alternate conformations were found for ortho-linked oxacalix[2]arene[2]pyrazine (1) and oxacalix[3]arene[3]pyrazine (2), respectively. However, a core conformation with C₃ symmetry was found for ortho-linked oxacalix[3]arene[3]pyrimidine (4), which is completely different from that of its isomer, compound 2.     

In situ synthesis of Ag nanoparticles in aminocalix[4]arene multilayers

The layer-by-layer (LbL) assembled thin films containing tetraamino-thiacalix[4]arenes (1) and tetraamino-calix[4]arenes (2) were used as nanoreactor to synthesize in situ Ag nanoparticles (Ag NPs). UV–vis spectra and AFM images demonstrate that Ag NPs are included in the (1/Ag NPs)_n and (2/Ag NPs)_n multilayer films. The silver ions are absorbed through cation–π interaction and calix[4]arene-metal ion coordination interaction and are reduced into Ag NPs by calix[4]arenes. TEM images indicated that Ag NPs within aminocalix[4]arene multilayers were highly dispersed and uniform. Moreover, the mean size of Ag NPs is smaller than 10 nm.     

Selective extraction of Cs(I) using 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene in ionic liquid solvents and its application to the treatment of high-level liquid waste

To separate heat-generating Cs from high-level liquid waste (HLLW), the extraction of Cs(I) using 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene (calix[4]arene-R14) in combination with 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) ionic liquids ([C _n mim][NTf₂], where n?=?2, 4, and 6) was investigated. Under moderately acidic conditions, the calix[4]arene-R14/[C _n mim][NTf₂] system showed a higher extraction efficiency (E_Cs) than that exhibited by the conventional calix[4]arene-R14/dichloromethane system. All extraction processes reached equilibrium within 5 min. Slope analysis revealed that the Cs:calix[4]arene-R14 inclusion complex has a 1:1 stoichiometry. The extraction was found to be exothermic and influenced by the presence of Na(I). These extraction systems exhibited high efficiency and selectivity for Cs(I) in simulated HLLW.