Solvent effects on two-photon absorption of dialkylamino substituted distyrylbenzene chromophore

Solvent effects on the two-photon absorption of a symmetrical diamino substituted distyrylbenzene chromophore have been studied using the density functional response theory in combination with the polarizable continuum model. It is shown that the dielectric medium has a rather small effect both on the bond length alternation and on the one-photon absorption spectrum, but it affects significantly the two-photon absorption cross section. It is found that both one- and two-photon absorptions are extremely sensitive to the planarity of the molecule, and the absorption intensity can be dramatically reduced by the conformation distortion. It has led to the conclusion that the experimentally observed anomalous solvent effect on the two-photon absorption of dialkylamino substituted distyrylbenzene chromophores cannot be attributed to the intrinsic properties of a single molecule and its interaction with solvents.     

Self-organized fluorescent nanosensors for ratiometric Pb2+ detection

Silica nanoparticles (60 nm diameter) doped with fluorescent dyes and functionalized on the surface with thiol groups have been proved to be efficient fluorescent chemosensors for Pb2+ ions. The particles can detect a 1 microM metal ion concentration with a good selectivity, suffering only interference from Cu2+ ions. Analyte binding sites are provided by the simple grafting of the thiol groups on the nanoparticles. Once bound to the particles surface, the Pb2+ ions quench the emission of the reporting dyes embedded. Sensor performances can be improved by taking advantage of the ease of production of multishell silica particles. On one hand, signaling units can be concentrated in the external shells, allowing a closer interaction with the surface-bound analyte. On the other, a second dye can be buried in the particle core, far enough from the surface to be unaffected by the Pb2+ ions, thus producing a reference signal. In this way, a ratiometric system is easily prepared by simple self-organization of the particle components.     

New structural motifs, unusual quenching of the emission, and second harmonic generation of copper(I) iodide polymeric or oligomeric adducts with para-substituted pyridines or trans-stilbazoles

The structural, emissive, and nonlinear optical properties of new CuI adducts with para-substituted trans-stilbazolic and pyridinic ligands are reported. Single-crystal X-ray diffraction results indicate that the para-substituent on the organic ligand greatly influences the structural motif by its steric (tert-butyl), electronic/steric (dimethylamino), or bridging-donor (cyano) properties so that two absolutely new structural motifs, polymeric and oligomeric, are found when trans-stilbazole and pyridine carry a dimethylamino group in the para-position. In addition, a surprising photoemission behavior is observed, being the solid-state emission of [CuI(trans-4-stilbazole)]n, [CuI(trans-4'-(dimethylamino)-4-stilbazole)]n, and [CuI(4'-tert-butyl-4-stilbazole)]n totally quenched. In the case of the noncentrosymmetric CuI adduct of trans-4'-(dimethylamino)stilbazole a discrete second harmonic generation (SHG) occurs.     

Aggregation‐Induced Photon Upconversion through Control of the Triplet Energy Landscapes of the Solution and Solid States

Aggregation‐induced photon upconversion (iPUC) based on control of the triplet energy landscape is demonstrated for the first time. When a triplet state of a cyano‐substituted 1,4‐distyrylbenzene derivative is sensitized in solution, no upconverted emission based on triplet–triplet annihilation (TTA) was observed. In stark contrast, crystalline solids obtained by drying the solution revealed clear upconverted emission. Theoretical studies unveiled an underlying switching mechanism: the excited triplets in solution immediately decay back to the ground state through conformational twisting around a C?C bond and photoisomerization, whereas this deactivation path is effectively inhibited in the solid state. The finding of iPUC phenomena highlights the importance of controlling excited energy landscapes in condensed molecular systems.     

Preparation of yttrium oxysulfide phosphor nanoparticles with infrared-to-green and -blue upconversion emission using an emulsion liquid membrane system

Yttrium oxysulfide upconverting phosphor nanoparticles, doped with Yb as a sensitizer and Er (or Ho, Tm) as an activator, have been prepared via a solid-gas reaction using precursor oxalate particles obtained in an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system. The resulting Y(2)O(2)S:Yb,Er particles, mainly smaller than 50 nm in diameter, demonstrated green upconversion emission under infrared excitation (lambdaex = 980 nm) via a two-photon process. Distinct green and blue upconversion emission were also demonstrated under the same infrared excitation from Y(2)O(2)S:Yb,Ho and Y(2)O(2)S:Yb,Tm nanoparticles, respectively. These upconverting phosphor nanoparticles, together with Y(2)O(3):Yb,Er infrared-to-red upconverting phosphor particles, with different emission under the same infrared excitation may be applied to the luminescent reporter materials for the detection of the targeted analyte in multiplexed assays.     

嘧啶基双光子荧光染料的设计合成与生物成像

生理条件下光学性质稳定的双光子荧光染料在生物成像领域具有广阔的应用前景。我们使用2,4-二甲基-6-羟基嘧啶与4-(N,N-二甲氨基)苯甲醛进行缩合反应,设计合成了具有双光子荧光性质的化合物2-[(1E)-2-[4-(二甲氨基)苯基]乙烯基]-6-甲基-4(3H)-嘧啶(NHP)。通过质谱(MS)、核磁共振波谱(NMR)、紫外可见吸收光谱和荧光发射光谱等技术手段表征了其结构,研究了其光物理性质,以及外部环境改变对其发射光谱的影响。结果表明,化合物NHP的最佳吸收峰位于400 nm,最佳发射峰位于540 nm左右,且荧光发射不受金属离子、氨基酸和pH等环境因素的影响。生物实验结果表明,化合物NHP细胞毒性较小,且具有很好的活细胞和果蝇脑组织成像效果,是一种较为理想的双光子荧光生物成像染料。     

Photophysical and electrochemical properties of 1,3-bis(2-pyridylimino)isoindolate platinum(II) derivatives

A series of twelve platinum(II) complexes of the form (N^N^N)PtX have been synthesized and characterized where N^N^N is 1,3-bis(2-pyridylimino)isoindolate ligands (BPI) or BPI ligands whose aryl moieties are substituted with tert-butyl, nitro, alkoxy, iodo or chloro groups, and X is a chloride, fluoride, cyano, acetate, phenyl or 4-(dimethylamino)phenyl ligand. All complexes display at least one irreversible oxidation and two reversible reduction waves at potentials dependent on the position and the electron donating or withdrawing nature of both X and the substituted N^N^N ligand. Broad room temperature phosphorescence ranging in energy from 594 to 680 nm was observed from the complexes, with quantum efficiencies ranging from 0.01 to 0.05. The efficiency of emission is dictated largely by nonradiative processes since the rate constants for nonradiative deactivation [(1.1-100) × 10(5) s(-1)] show greater variation than those for radiative decay [(0.57-4.0) × 0(4) s(-1)]. Nonradiative deactivation for compounds with X = Cl follow the energy gap law, i.e. the nonradiative rate constants increase exponentially with decreasing emission energy. Deactivation of the excited state appears to be strongly influenced by a non-planar distortion of the BPI ligand.     

Benzothiadiazole-Substituted Aza-BODIPY Dyes: Two-Photon Absorption Enhancement for Improved Optical Limiting Performances in the Short-Wave IR Range

Aza-boron dipyrromethenes (aza-BODIPYs) presenting a benzothiadiazole substitution on upper positions are described. The strong electron-withdrawing effect of the benzothiadiazole moiety permits enhancement of the accepting strength and improves the delocalization of the aza-BODIPY core to attain a significant degree of electronic communication between the lower donating groups and the upper accepting groups. The nature of the intramolecular charge transfer is studied both experimentally and theoretically. Linear spectroscopy highlighted the strongly redshifted absorption and emission of the synthesized molecules with recorded fluorescence spectra over 1000 nm. Nonlinear optical properties were also investigated. Strong enhancement of the two-photon absorption of the substituted dyes compared with the unsubstituted one (up to 4520 GM at 1300 nm) results in an approximately 15–20 % improvement of the optical power limiting performances. These dyes are therefore a good starting point for further improvement of optical power limiting in the short-wave IR range.     

Two-photon absorption in quadrupolar pi-conjugated molecules: influence of the nature of the conjugated bridge and the donor-acceptor separation

Quadrupolar-type substitution of pi-conjugated chromophores with donor and acceptor groups has been shown to increase their two-photon absorption (TPA) response by up to two orders of magnitude. Here, we apply highly correlated quantum-chemical calculations to evaluate the impact of the nature of conjugated bridge and the charge-transfer distance on that enhancement. We compare chromophores with phenylenevinylene-, thienylenevinylene-, polyene-, and indenofluorene-type backbones substituted by dimethylamino and cyano groups. In all compounds, we find a strongly TPA-active A(g) state (either 2A(g) or 3A(g)) in the low-energy region, as well as a higher lying TPA-active state (mA(g)) at close to twice the energy of the lowest lying one-photon allowed state; the smaller energy detuning in the mA(g) states results in very large TPA cross sections delta. We also investigate the influence of the degree of ground-state polarization on TPA. Independent of the nature of the backbone and the donor-acceptor separation, delta displays the same qualitative evolution with a maximum before the cyanine-like limit; the highest TPA cross sections are calculated for distirylbenzene- and polyene-based systems.     

Conformationally restricted dipyrromethene boron difluoride (BODIPY) dyes: highly fluorescent, multicolored probes for cellular imaging

Novel fluorescent, conformationally restricted dipyrromethene boron difluoride (BODIPY) dyes have been prepared by introducing a naphthalenyl group at the meso position of the BODIPY core. These BODIPY dyes exhibit increased fluorescence quantum yields compared with dyes that have a meso-position phenyl group with internal rotation. The absorption and emission wavelengths of such conformationally restricted BODIPY dyes can be easily tuned to the near-IR range by derivatization through a condensation reaction with benzaldehyde derivatives. The two-photon absorption properties of these BODIPY dyes were also investigated and the results show that they exhibit increased two-photon excited fluorescence compared to analogue dyes that contain a phenyl group. The one- and two-photon fluorescence imaging of living cells by using selected BODIPY dyes has been successfully demonstrated.     

Synthesis and Characterization of Diketopyrrolopyrrole-Based Aggregation-Induced Emission Nanoparticles for Bioimaging

Conventional fluorescent dyes have the property of decreasing fluorescence due to aggregation-caused quenching effects at high concentrations, whereas aggregation-induced emission dyes have the property of increasing fluorescence as they aggregate with each other. In this study, diketopyrrolopyrrole-based long-wavelength aggregation-induced emission dyes were used to prepare biocompatible nanoparticles suitable for bioimaging. Aggregation-induced emission nanoparticles with the best morphology and photoluminescence intensity were obtained through a fast, simple preparation method using an ultrasonicator. The optimally prepared nanoparticles from 3,6-bis(4-((E)-4-(bis(40-(1,2,2-triphenylvinyl)-[1,10-biphenyl]-4-yl)amino)styryl)phenyl)-2,5-dihexyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione (DP-R2) with two functional groups having aggregation-induced emission properties and additional donating groups at the end of the triphenylamine groups were considered to have the greatest potential as a fluorescent probe for bioimaging. Furthermore, it was found that the tendency for aggregation-induced emission, which was apparent for the dye itself, became much more marked after the dyes were incorporated within nanoparticles. While the photoluminescence intensities of the dyes were observed to decrease rapidly over time, the prepared nanoparticles encapsulated within the biocompatible polymers maintained their initial optical properties very well. Lastly, when the cell viability test was conducted, excellent biocompatibility was demonstrated for each of the prepared nanoparticles.     

Synthesis and spectral properties of non-symmetrical red and near IR emitter dibenzoBODIPYs

New symmetrical and non-symmetrical benzoBODIPYs have been synthesized from diketones. For the two series the 3 and 5 positions have been substituted by different aromatic rings and onto benzo sub-units different groups have been introduced. The methodology of diketones self-condensation provides symmetrical dyes. By cross-condensation reaction, these positions can be differentiated and specific functions connected to the desired positions. These molecules have been fully characterized and their optical properties analyzed by both experimental and theoretical means. They are red to NIR emitters with a range of emission from 679 to 780?nm in CH₂Cl₂. They show maxima of absorption between 651?nm and 732?nm, strong ε of around 100,000?M^?1?cm^?1 and quite good quantum yields from 16% to 75%. The thienyl moiety on α-positions of the nitrogens generates the highest red shifts. Meanwhile dimethylamino groups in the same positions bring, besides chemical properties, proton sensitive dyes. The bromine atom onto the dibenzo sub-units exhibits good reactivity through Sonogashira coupling reactions. This approach provides multifunctional red to NIR dyes with endless possibilities of combination of chemical properties.     

Facile Suzuki Coupling Strategy toward New Nile Red Derivatives with Improved Two-Photon Brightness

Chemical fine-tuning of fluorophores is a pivotal step towards development of next generation fluorescent dyes for microscopy. With the advent of high-resolution two-photon excitation fluorescence imaging, there is a growing demand for very sensitive laser dyes that can be efficiently excited using commercial Ti:sapphire laser sources in the first near-infrared window (NIR-I, 780–1020 nm). Using the fluorescent dye Nile Red as the lead structure, we report a robust and concise Suzuki coupling approach for the synthesis of 14 new Nile Red analogues that feature extended π ring systems and diverse functionalities. For this set, we gauged their two-photon excitation efficiency in NIR-I as well as evaluated their general fluorescent properties (emission wavelength, Stokes shift, quantum yield and solvatochromism). Several of the new fluorophores were found to display very favorable characteristics. In particular, the derivative featuring a 4-aminophenyl group in the 2-position of Nile Red exhibited extreme solvent sensitivity, and the thien-2-yl substituted Nile Red derivative showed significantly redshifted emission, large Stokes shift and high two-photon brightness.     

The Effects of Methylene Blue on the Optical Properties of Nanometer-sized CdS Organosol

The inverse micelle system of nanometer-sized CdS doped with Methylene Blue(MB) was synthesized and characterized by using absorption and fluorescence spectra. The results show that MB molecules were absorbed onto the surface of CdS nanoparticles and interacted with surfactants when its concentration was lower than 4×10^-6 mol/L. From the comparison of their spectra, MB molecules by adsorption have a strong quenched fluorescence emission of CdS nanoparticles with surface defect states. All responses and main mechanism are ascribed to the charge transfer between the CdS organosol and Methylene Blue molecules.     

Near‐Infrared Croconaine Rotaxanes and Doped Nanoparticles for Enhanced Aqueous Photothermal Heating

The photothermal effect is the generation of heat by molecules or particles upon high‐energy laser irradiation, and near‐infrared absorbers such as gold nanoparticles and organic dyes have a range of potential photothermal applications. The favourable photothermal properties of thiophene‐functionalised croconaine dyes were recently discovered. The synthesis and properties of novel croconaine rotaxane and pseudorotaxane architectures capable of efficient photothermal performance in both organic and aqueous environments are reported. The versatility of this dye‐encapsulation strategy was demonstrated by the preparation of two organic croconaine rotaxanes using different synthetic methods: the formation of an aqueous pseudorotaxane association complex, and the synthesis of water‐soluble, croconaine‐doped silicated micelle nanoparticles. All of these near‐infrared‐absorbing systems exhibit excellent photothermal behaviour, with pseudorotaxane and rotaxane formation vital for effective aqueous heat generation. Dye encapsulation provides steric protection to enhance the stability of a water‐sensitive croconaine dye, while rotaxane‐doped nanoparticles avoid detrimental band broadening caused by chromophore coupling.     

均二苯乙烯类双光子荧光探针的合成及对金属离子的识别

合成了以均二苯乙烯为荧光母体, 一端以N,N-二甲基, 一端以7-苯基-1-氧杂-4,10-二硫杂-7-氮杂环十二烷(NS2O)为受体的荧光探针(DMNS2O), 并用1H NMR等技术对其进行了结构鉴定. 通过X射线单晶衍射分析发现均二苯乙烯的3个苯环非共平面, 二面角分别为24.6°和37.5°; 在加入金属离子Ag+和Zn2+之后, 探针在600 nm处的荧光峰消失, 420 nm处产生新的荧光峰, 其它金属离子的干扰较小.双光子荧光激发研究结果表明, 当激发波长为750 nm时, 双光子荧光发射最强.     

Coumarin-based two-photon AIE fluorophores: Photophysical properties and biological application

Based on the coumarin skeleton, we deliberately designed two groups of fluorophores, termed as Coum-R and Naph-Coum-R, using the diphenylamino group as the electron donor, which displayed long-wavelength emissions (red spectral region), large Stokes shift (up to 204 nm), superior AIE performance, and large two-photon absorbance cross-sections (as high as 365 GM). The electron-withdrawing substituents at the 3-position of these dyes could induce a significant red-shift in their emission spectra. Preliminary imaging experiments demonstrated the capability of these dyes as two-photon fluorophores for specifically staining lipid droplets in living cells.     

Photophysical properties of blue - emitting silicon nanoparticles

Silicon nanoparticles with strong blue photoluminescence were synthesized by electrochemical etching of silicon wafers and ultrasonically removed under N(2) atmosphere in organic solvents to produce colloids. Thermal treatment leads to the formation of colloidal Si particles of 3 ± 1 nm diameter, which upon excitation with 340 - 380 nm light exhibited room temperature luminescence in the range from 400 to 500 nm. The emission and the one- and two-photon excitation spectra of the particles are not sensitive to surface functionalization with methyl 2-methylprop-2-enoate. However, the derivatized particles show higher emission quantum yields in air-saturated suspensions (44%) than the underivatized particles (27%), as well as higher stability of its dispersions.FTIR and XPS spectra indicate a significant surface oxidation of the particles. The Si:O:C ratio at the surface of the derivatized particles estimated from XPS is Si(3)O(6)(C(5)O(2)H(y))(1), with y = 7 - 8. Vibronic spacing is observed in both the emission and excitation spectra. The information obtained from one-photon excitation experiments (emission and excitation spectra, photoluminescence quantum yields, luminescence decay lifetimes and anisotropy correlation lifetimes), as well as from two-photon excitation fluorescence correlation spectroscopy (brightness and diffusion coefficients) and TEM indicate that the blue-emitting particles are monodisperse and ball-shaped. Particle size clearly determines the emission and excitation spectral region, as expected from quantum confinement, but the presence and extent of Si-O species on the silicon networks seem crucial for determining the spectrum features and intensity of emission. The nanoparticles could hold great potential as quantum dots for applications as luminescence sensors in biology and environmental science.     

Thermally-Polymerized Rylene Nanoparticles

Rylene dyes functionalized with varying numbers of phenyl trifluorovinylether (TFVE) moieties were subjected to a thermal emulsion polymerization to yield shape-persistent, water-soluble chromophore nanoparticles. Perylene and terrylene diimide derivatives containing either two or four phenyl TFVE functional groups were synthesized and subjected to thermal emulsion polymerization in tetraglyme. Dynamic light scattering measurements indicated that particles with sizes ranging from 70 - 100 nm were obtained in tetraglyme, depending on monomer concentration. The photophysical properties of individual monomers were preserved in the nanoemulsions and emission colors could be tuned between yellow, orange, red, and deep red. The nanoparticles were found to retain their shape upon dissolution into water and the resulting water suspensions displayed moderate to high fluorescence quantum yield.     

Photoluminescence and electroluminescence of methoxy and carboethoxy derivatives of 1,3-diphenyl-1H-pyrazolo[3,4-b]quinoline

A series of methoxy (MO) and carboethoxy (CE) derivatives of 1,3-diphenyl-1H-pyrazolo[3,4-b]quinoline ([DPPQ]) are characterized by spectroscopic methods. All dyes show the photoluminescent spectra which are highly solvatochromic. In the case of 6MO[DPPQ] and 6CE[DPPQ] the emission bands are broad and shifted to the red with increasing of solvent polarity whereas the dyes 6MO1pMO[DPPQ] and 6MO13pMO[DPPQ] exhibit a reverse solvatochromism. The large difference between the excited- and state-dipole moments indicates a strong electron transfer effects in all dyes. The EL spectra are obtained for the fabricated OLEDs with a general structure of EL device ITO/PVK:6X[DPPQ]/Ca/Al. The blue emission originating from PVK host matrix appears to be quenched in EL spectra of doped PVK matrix giving rise to emission in blue, blue-green or green spectral regions. The obtained results demonstrate that a series of newly synthesized methoxy and carboethoxy [DPPQ]-derivatives may be considered as promising materials for electroluminescent applications.