Studies on the reduction of the nitro group in 3-aryl-2-methylene-4-nitro-alkanoates afforded by the Baylis-Hillman adducts: synthesis of 4-aryl-3-methylene-2-pyrrolidinones and 3-(1-alkoxycarbonyl-vinyl)-1H-indole-2-carboxylates

The formation of substituted 2-pyrrolidinones and indoles by the reduction of the secondary nitro group in appropriate 3-aryl-2-methylene-4-nitroalkanoates afforded by Baylis-Hillman chemistry via different reducing agents is described. The 3-aryl-2-methylene-4-nitroalkanoate obtained from S_N2 nucleophilic reaction between the acetate of Baylis-Hillman adducts and ethyl nitroacetate upon reduction with indium-HCl furnishes a mixture of cis and trans substituted phenyl-3-methylene-2-pyrrolidinones. In contrast, similar reductions of analogous substrates derived from nitroethane stereoselectively furnished only the trans substituted phenyl-3-methylene-2-pyrrolidinones. On the other hand the SnCl₂·2H₂O-promoted reductions of substrates derived from nitro ethylacetate give oxime derivatives while the ones obtained from nitroethane yield a mixture of cis and trans 4-aryl-3-methylene-2-pyrrolidinones. Alternatively, the SnCl₂·2H₂O-promoted reduction of substituted 2-nitrophenyl-2-methylene-alkanoate furnished from ethyl nitroacetate yield 3-(1-alkoxycarbonyl-vinyl)-1H-indole-2-carboxylate while indium-promoted reaction of this substrate leads to a complex mixture. Analogous reactions with SnCl₂·2H₂O of substituted 2-nitrophenyl-2-methylene-alkanoate obtained from nitroethane yield 4-alkyl-3-methylene-2-quinolones in moderate yields.     

Synthesis of substituted 3-methylene-2-pyridones from Baylis-Hillman derivatives and its application for the generation of 2-pyridone substituted spiroisoxazolines

The synthesis of substituted 3-methylene-2-pyridones via S_N2 displacement reaction of nucleophiles bearing a keto group on the acetyl derivative of Baylis-Hillman adducts of acrylonitrile followed by TFA/H₂SO₄-mediated intramolecular cyclization is described. The utility of these pyridone derivatives for the synthesis of new spiroisoxazolines in highly regio- and stereo-selective fashion is also illustrated. The structure of the spiroisoxazolines has been secured via X-ray crystallographic analysis.     

Ring-opening of tertiary cyclopropanols derived from β-diketones

The ring-opening reaction of 1,2-disubstituted cyclopropanols, prepared from β-diketones, mediated by Cu(NO₃)₂, p-TsOH, and NaOH is reported. The Cu(II)-mediated ring-opening of cyclopropanols gave α-methylene-γ-diketones in good yields. The reaction took place at the less substituted carbon of the cyclopropanols, involving mild conditions and a simple procedure. The reaction induced by p-TsOH in CH₂Cl₂ afforded α-methyl-γ-diketones as the major product with minor amounts of δ-diketones. The 2,3,5-trisubstituted furans were obtained in high yields when the ring-opening reaction was mediated by p-TsOH in methanol under reflux conditions. In the presence of sodium hydroxide the reaction proceeded smoothly in preference to the formation of δ-diketones, particularly for substrates with an aromatic group on the cyclopropane.     

An efficient synthesis of quinolines under solvent-free conditions

An efficient synthesis of substituted quinolines has been achieved in a one-pot reaction from o-nitrobenzaldehyde and enolizable ketones using SnCl₂·2H₂O as the reductant under microwave irradiation without any solvent or catalyst     

Monoclinic zirconia nanoparticle-catalyzed regioselective synthesis of some novel substituted spirooxindoles through one-pot multicomponent reaction in a ball mill: A step toward green and sustainable chemistry

A highly efficient, green as well as atom economical protocol for the synthesis of substituted spirooxindoles from m-ZrO₂ NPs catalyzed multicomponent reaction of isatin derivatives with ethyl cyanoacetate and 1,3-dicarbonyl compounds in a ball mill has been established. Because of the simple and readily available starting materials, easy operation, and high bioactivity of substituted spirooxindoles, this strategy can be broadly applied to medicinal chemistry. The recyclability of the m-ZrO₂ Nps catalyst is another emphasis of proposed methodology.     

An efficient synthetic route to substituted tetrahydropyrimidines by Cu(OTf)2-mediated nucleophilic ring-opening followed by the [4+2] cycloaddition of N-tosylazetidines with nitriles

A highly efficient strategy for Cu(OTf)₂-mediated S_N2 type nucleophilic ring-opening followed by the [4+2] cycloaddition reactions of a number of 2-aryl-N-tosylazetidines with nitriles to afford a variety of substituted tetrahydropyrimidines in excellent yields is reported. The resulting tetrahydropyrimidines could easily be transformed into synthetically important 1,3-diamines by acid-catalyzed hydrolysis. The strategy has been extended to the synthesis of enantiomerically pure tetrahydropyrimidines from enantiopure disubstituted azetidines. The reaction proceeds through an S_N2 type mechanism as proposed by us earlier.     

Simple but efficient synthesis of novel substituted benzimidazoles over ZrO2-Al2O3

Solid-acid catalytic materials such as ZrO₂-Al₂O₃ containing 80?mol% of ZrO₂ were prepared by the solution combustion method (SCM) using different fuels such as urea, hexamethylene tetramine, glycine, and sucrose. All the prepared solid acid catalytic materials were characterized for their physico-chemical properties like crystalinity, acidity, functionality and morphology. These materials were evaluated for their catalytic activity in the synthesis of a series of novel substituted benzimidazoles. The reaction conditions were optimized by varying the solvents, reaction temperature, weight of solid acid catalyst, molar ratio of the reactants, and reaction time. The ZrO₂-Al₂O₃ solid acid catalytic material prepared by urea as a fuel was found to be highly active, recyclable, and reusable in the synthesis of benzimidazoles. A possible reaction mechanism for the synthesis of benzimidazoles is also proposed.     

A simple and efficient synthesis of 2-substituted benzothiazoles catalyzed by H_2O_2/HC1

A simple and efficient procedure for the synthesis of substituted benzothiazoles through condensation of 2-aminothiophenol with aromatic aldehydes in the presence of H₂O₂/HCl system in ethanol at room temperature is described. The target compounds have been characterized by ¹H NMR, ¹³C NMR, IR and MS. Short reaction time, easy and quick isolation of the products, and excellent yields are the main advantages of this procedure.     

Copper(II) triflate promoted cycloaddition of α-alkyl or aryl substituted N-tosylaziridines with nitriles: a highly efficient synthesis of substituted imidazolines

Cu(OTf)₂ or Zn(OTf)₂ mediated [3+2] cycloaddition reactions of various α-alkyl or aryl substituted N-tosylaziridines with nitriles is described for the syntheses of substituted imidazolines. A mechanism for the cycloaddition is proposed to rationalize the formation of a nonracemic imidazoline from optically pure aziridine.     

稻壳灰负载FeCl2·2H2O:一个温和高效的多相催化剂用于Friedlnder杂成环反应合成多取代喹啉（英文）

Rice husk ash was used as a new, green, and cheap adsorbent for FeCl3. Characterization of the obtained reagent showed that rice husk ash supported FeCl2·2H2O was formed. This reagent is efficient at catalyzing the synthesis of multisubstituted quinolines by the Friedl鋘der heteroannulation of o‐aminoaryl ketones with ketones or β‐diketones under mild reaction conditions. This methodology allows for the synthesis of a broad range of substituted quinolines in high yields and with excellent regioselectivity in the absence of a solvent.     

NaHSO4·H2O as a Heterogeneous Acidic Reagent for Mild and Convenient Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones and Their Sulfur Derivatives

One-pot cyclocondensation reaction of aromatic aldehydes, 1,3-dicarbonyl compounds and urea/thiourea in the presence of NaHSO₄·H₂O produced 4-aryl substituted 3,4-dihydropyrimidin-2(1H)-ones and their sulfur analogs in high to excellent yields. The reactions were carried out in refluxing n-hexane and were completed within 2.5–11 h.     

Theoretical study on H2 elimination pathways of silylenoid H2SiLiF with CH4, NH3, H2O, HF, SiH4, PH3, H2S, and HCl

Ab initio molecular orbital calculations have been performed to explore the reaction potential energy surfaces of silylenoid H₂SiLiF with XH _n hydrides, where XH _n = CH₄, NH₃, H₂O, HF, SiH₄, PH₃, H₂S, and HCl. We have identified a previously unreported reaction pathway on each reaction surface, H₂SiLiF + H-XH _{n − 1} → H _n XSiLiF + H₂, which involves H₂ elimination following the initial formation of an association complex via a four-membered ring transition state to form the substituted three-membered ring silylenoid H _n XSiLiF and a H₂ molecule. This theoretical calculations suggest that (i) for H₂ eliminations there is a very clear trend toward lower activation barriers and more exothermic interactions on going from left to right along a given row in periodic table, and (ii) for the second-row hydrides, the H₂ elimination reactions are less exothermic than for the first-row hydrides and the reaction barriers are lower for X–S and Cl. Compared to the insertions of H₂SiLiF into XH _n , the H₂ elimination pathways should be unfavorable with higher barrier and lower exothermic.     

Lewis acid mediated SN2-type nucleophilic ring opening followed by [4+2] cycloaddition of N-tosylazetidines with aldehydes and ketones: synthesis of chiral 1,3-oxazinanes and 1,3-amino alcohols

A highly efficient strategy for Cu(OTf)₂ mediated S_N2-type nucleophilic ring opening followed by [4+2] cycloaddition reactions of enantiopure 2-phenyl-N-tosylazetidines with various aldehydes and ketones afforded a variety of substituted 1,3-oxazinanes and 1,3-amino alcohols in excellent yields, excellent de and good to excellent ee. The proposed S_N2-type mechanism of the cycloaddition reaction is supported by experimental evidence.     

NHC catalyzed CO2 fixation with epoxides: Probable mechanisms reveal ter molecular pathway

Six different pathways for the NHC-mediated CO₂ transformation reaction of epoxide to cyclic carbonate are investigated with DFT method at MPWB1K/6-311++G(3df,2p) level which confirms that the most favorable pathway is ter molecular in nature and passes through a regioselective S_N2 anti-attack of NHC on the least substituted carbon of the epoxide-CO₂ complex.     

KAl(SO4)2 · 12H2O (alum) a reusable catalyst for the synthesis of some 4-substituted coumarins via Pechmann reaction under solvent-free conditions

A simple, efficient, and practical procedure for the Pechmann condensation using KAl(SO₄)₂ · 12H₂O (alum) as a non-toxic, reusable, inexpensive, and easily available catalyst is described under solvent-free condition at 65°C. These improved reaction conditions allow the preparation of a wide variety of some new substituted coumarins in high yields (86–96%) and purity under mild reaction conditions. Compared to the classical Pechmann condensation, this new method consistently has the advantage of high yields. Correspondence: Ali A. Mohammadi, Department of Chemistry, Shahid Beheshti University, P.O. Box 19839-4716, Tehran, Iran.     

One‐Pot Synthesis of Benzimidazoles from o‐Nitroanilines under Microwaves via a Reductive Cyclization

An efficient microwave irradiation synthesis of 2‐substituted benzimidazoles in one step via the Na₂S₂O₄ reduction of o‐nitroanilines in the presence of aldehydes is described. The method is simple and a good option to obtain the title compounds in a very short time.     

KF/Al2O3催化下取代水杨醛与达米酮的反应

取代水杨醛与5,5-二甲基-1,3-环己二酮(达米酮)在KF/Al₂O₃催化下反应生成一系列苯并吡喃的衍生物. 产物的结构通过红外光谱、核磁共振氢谱和元素分析进行表征, 并通过X单晶衍射分析进一步证实产物的结构.     

Ligand-free catalytic system for the synthesis of diarylethers over Cu2O/Cu-CNTs as heterogeneous reusable catalyst

Various substituted diarylether derivatives were prepared by using heterogeneous reusable Cu₂O- and Cu-coated carbon nanotubes (Cu₂O/Cu-CNTs) as catalyst under ligand-free conditions, which provided good to excellent yields. The catalyst was characterized by TEM, XRD, and AAS analysis. The effects of solvent, base, and amount of catalyst for the O-arylation were investigated. The catalyst could be recovered by simple filtration from the reaction mixture without further treatment and reused several times with consistent catalytic activity. In addition, CNTs could also be recovered from the used Cu₂O/Cu-CNTs by a simple acid treatment.     

Yb(OTf)3: an efficient catalyst for the synthesis of 3-arylbenzo [f]quinoline-1,2-dicarboxylate derivatives via imino-Diels-Alder reaction

A mild and facile method for the synthesis of 3-arylbenzo[f]quinoline-1,2-dicarboxylate derivatives is reported by an imino-Diels-Alder reaction in high yields (76-92%). This procedure includes a novel three-component reaction of aromatic aldehyde, naphthalen-2-amine, and but-2-ynedioate catalyzed by Yb(OTf)₃ in toluene. The results are obviously different from those of the simple substituted aniline-involved reactions catalyzed by ZnCl₂ or KOH in the literature.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.