Capping the upper and lower rims of calix[4]arenes by aryl dinitrile oxide reactions

1,3-Dipolar cycloadditions of upper- and lower-rim diallylcalix[4]arenes (1 and 3) with aryl dinitrile oxides provide a unique and efficient way of capping the calix[4]arenes. When dinitrile oxides reacted with 5-allylcalix[4]arene 7, they underwent a 1,3-dipolar cycloaddition on one side and an electrophilic substitution on the other side, which led to a novel type of asymmetric calix[4]arenes (9 and 12).     

The first synthesis and characterisation of elusive cone 1,2-diformyl tetralkoxycalix[4]arenes and their derivatives

The synthesis and isolation of elusive tetralkoxycalix[4]arenes 2 in the cone conformation and bearing two formyl groups in proximal (1,2) positions at the upper rim are described for the first time. They were obtained as a mixture with the distal (1,3) regioisomers 3 by optimizing the Gross formylation reaction on the tetralkoxycalix[4]arenes 1. After reduction to the corresponding alcohols, compounds 4 could be isolated and oxidized to 1,2-diformyl (2) and 1,2-diacid (6) tetralkoxycalix[4]arenes. These 1,2-difunctionalized derivatives are useful intermediates for the synthesis of calixarene-based molecular receptors having proximal binding groups.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.     

Bis- and tetracalix[4]arenes in the partial cone conformation: synthesis, structure and RCM reactions

The synthesis, structure and ring-closing metathesis (RCM) reactions of polyether bridged biscalix[4]arenes 6 in the partial cone conformation with upper rim allyl substituents are reported. The RCM reaction modes depend on the length of polyether chain. Diethylene glycolic chain produced the dimer 7a and linear oligomer 7a′ with multi-cavities, whereas triethylene and tetraethylene glycolic chains allowed direct cyclization through intramolecular head-to-tail pattern to yield novel bridged biscalix[4]arenes 7b-c.     

Multiple catenanes based on tetraloop derivatives of calix[4]arenes

Four novel tetraarylurea calix[4]arenes (4a-d) have been synthesized, substituted by ω-alkenyloxy residues in 3,5-positions of the arylurea residues. The eight alkenyl groups were pairwise connected by olefin metathesis and subsequent hydrogenation. The ring-closure reaction was carried out with heterodimers exclusively formed by 4 with a tetratosylurea calix[4]arene 1, which serves as a template in this reaction step. The potential trans-cavity bridging is entirely suppressed in this way. Bis- and tetraloop calix[4]arenes cannot form dimers due to overlapping loops. However, they readily form heterodimers with open-chain tetraureas, as long as their urea residues can pass through the loops. Thus, five heterodimeric capsules 8a-e with bis[3]catenane structure were synthesized using again the olefin metathesis followed by hydrogenation. Two different strategies were compared for this reaction sequence, starting with heterodimers formed either by tetraloop derivatives 5 with tetraalkenyl tetraureas 6 (pathway A) or by bisloop derivatives 7 with octaalkenyl tetraureas 4 (pathway B). A distinct advantage of one of these pathways was not observed; the bis[3]catenanes were obtained with yields of 20-60%. Heterodimers formed by tetraloop derivatives 5b-d and octaalkenyl ureas 4b-d were converted analogous to three novel cyclic [8]catenanes 9a-c in 30-42% yield. The structure of the novel catenanes was unambiguously proved by ¹H NMR and ESI MS, and for 8a and 9a additionally by single crystal X-ray analysis.     

Synthesis of the first examples of p-bromodienone and transannular spirodienone calixarene derivatives

The first examples of p-bromodienone calixarene derivatives (6-7 and 9-10) have been obtained by treatment of 1,5-dihydroxy-hexaalkoxycalix[8]arenes 5 or tripropoxycalix[4]arene 8 with trimethylphenylammonium tribromide and a saturated solution of NaHCO₃. The first transannular spirodienone derivative 11 was only obtained in the presence of NaOH or using the KOH/I₂/PEG-200 oxidizing system.     

Synthesis and X-ray structures of iodothiacalix[4]arenes

Mono-, di-, and tetraiodothiacalix[4]arenes 13-16 have been successfully synthesized for the first time by the Griess reaction of diazonium salts of the corresponding aminothiacalix[4]arenes 4-7. X-ray crystallography reveals that monoiodinated compound 13 adopts a distorted pinched cone conformation, in which the three hydroxy groups and the iodine atom form a pseudo-cyclic hydrogen bonding. On the other hand, tetraiodinated compound 16 adopts a 1,3-alternate conformation presumably due to the steric hindrance and dipole repulsion between the iodine atoms.     

Calix[8]arene-based glycoconjugates as multivalent carbohydrate-presenting systems

An efficient approach for the introduction of eight mono- or disaccharide sugar moieties (d-glucose, N-acetyl-d-glucosamine, d-galactose, l-fucose, d-maltose and d-cellobiose) at the upper rim of calix[8]arene 1, using thioureido linkers, is reported. The obtained water-soluble, nanosized glycocalix[8]arenes 5b-10b may act as biomimetic carbohydrate systems and as hosts for highly polar organic molecules. Preliminary ¹H NMR complexation experiments of octaglycosyl derivative 7b and 10b with ionic guests are also reported.     

Aramidocalix[4]arenes as new anion receptors

Calix[4]arenes bearing aromatic amide (aramid) moieties at the upper rim display interesting recognition properties toward anions and in particular versus planar trigonal nitrate and Y-shaped benzoate. Molecular modeling and DFT calculations indicate that the high affinity displayed by aramidocalix[4]arenes 3 and 4 for nitrate anion is likely due to the planar arrangement of the NH groups, which form an unusual six-hydrogen-bond scheme with nitrate anion.     

Formation of water-soluble sulfonated azacalix[4]arenes from cyanuric chloride

Addition of cyanuric chloride 2 (2,4,6-trichlorotriazine) to 4,6-diaminobenzene-1,3-disulfonic acid 1 gives a bis-triazine 3 which may be cyclised with diaminoarenes to yield water-soluble azacalix[4]arenes 5a-d. Alternatively, double substitution of chloride from the bis-triazine 3 yields new bis-triazine derivatives which may likewise be cyclised to functionalised azacalixarenes bearing functionalised side chains.     

Novel nucleotide-calixarene conjugates via phosphoester linkage

Calix[4]arenes bearing thymine, adenine, cytosine, guanine 2′-deoxynucleotide residues have been synthesized following the phosphoramidite chemistry. Hybrid compounds 2a-d and 3a-d represent the first example of nucleotides linked to the calixarene lower rim by a phosphoester bond. Preliminary studies about their assembling in apolar solvent and host properties toward biologically interesting guests are also reported.     

A specific and ratiometric chemosensor for Hg based on triazole coupled ortho-methoxyphenylazocalix[4]arene

Calix[4]arene 3, which contains two distal triazole groups on the lower rim and two distal o-methoxyphenylazo groups on the upper rim, was synthesized and found to be a specific and ratiometric sensor for Hg²⁺ in a polar protic solvent. A series of o-methoxyphenylazo derivatives (3, 4, 5, 7, and 9) were synthesized, which proved that the lower-rim triazoles and the hydroxyl azophenol(s) were the major ligands for metal ion binding. Though analogues 4 and 10 showed some sensitivity for Hg²⁺, compound 3 was the only ratiometric chemosensor for Hg²⁺ among the series of azocalix[4]arenes synthesized in this work. The formation of 3·Hg²⁺ complex was supported by UV/vis and NMR titration studies and Mass spectrometry. Based on the symmetrical features of NMR spectra of 3·Hg²⁺, the complex is believed to be symmetrical with respect to the calix[4]arene cavity. Furthermore, the complex was determined to be 1:1 binding stoichiometry by Job’s plot, and the association constant was determined to be 4.02×10³ M⁻¹ using Benesi-Hildebrand plot.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Synthesis of redox-active biscalix[4]quinones and their electrochemical properties

Biscalix[4]arenes, 7 and 8, have been synthesized by a one-pot coupling method and a stepwise approach, respectively. One-pot reaction in a pressurized vessel resulted in the symmetric biscalix[4]arene 7 in high yield. Oxidation of compounds 7 and 8 by Tl(CO₂CF₃)₃ in CF₃COOH yielded biscalix[4]quinones, 9 and 10, respectively. Preliminary electrochemical studies by cyclic voltammetry of 9 and 10 show significant changes of their voltammograms upon addition of Na⁺.     

Synthesis of mono-, di-, and trinitro tricarboxymethyl calix[6]arenes for the complexation of uranium(VI)

Mono-, di-, and trinitro tricarboxymethyl calix[6]arenes 3(a-c) have been synthesised and their acid-base behaviour determined by potentiometric investigations. It was shown that the nitro groups do not play a major role on the acid-base properties. Preliminary complexation of uranyl is presented.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Ullmann coupling reaction of 1,3-bistriflate esters of calix[4]arenes: facile syntheses of monoaminocalix[4]arenes and 4,4′:6,6′-diepithiobis(phenoxathiine)

Treatment of 1,3-bistriflate esters of thiacalix- (6a) and calix[4]arenes 6b with benzylamine in the presence of CuI and K₃PO₄ results in the displacement of a TfO moiety with a benzylamino group, which provides an easy access to monoaminothiacalix[4]arene 4a and its methylene-bridged counterpart 4b. On the other hand, the reaction of 6a in the absence of benzylamine leads to intramolecular dietherification, giving 4,4′:6,6′-diepithiobis(phenoxathiine) 7a.     

Convenient synthesis of [3]catenane by olefin metathesis dimerizations

[3]Catenane 5a and 5b were synthesized conveniently by olefin metathesis dimerization of pseudorotaxanes 3a and 3b. The yields of 5a and 5b were influenced by concentrations of 3a and 3b, and a ring size of a center wheel of [3]catenane.