Baeyer-Villiger oxidation of ketones with hydrogen peroxide catalyzed by Sn-aniline complex

Sn-aniline complex was prepared by a simple procedure.Cyclic and acyclic ketones were oxidized into lactones or esters with very high selectivity and yield with 30% hydrogen peroxide in the presence of Sn-aniline complex.     

Baeyer-Villiger oxidation of ketones with hydrogen peroxide catalyzed by Sn-palygorskite

Palygorskite-supported Sn complexes were prepared by a simple procedure. Cyclic ketones and acyclic ketones were oxidized by hydrogen peroxide in a reaction catalyzed by palygorskite-supported Sn complexes, affording corresponding lactones or esters with selectivity for the product of 90-100%. The catalysts can be recycled for several times without significant decline in catalytic activity.     

Metal hydroxides as catalysts for the Baeyer-Villiger oxidation of cyclohexanone with hydrogen peroxide

This paper reports the results obtained in the Baeyer-Villiger oxidation of cyclohexanone with a hydrogen peroxide/benzonitrile mixture as oxidant in the presence of synthetic metal hydroxides or their calcined products as catalysts. The metal hydroxides were obtained by coprecipitation. The best ε-caprolactone conversion results were provided by magnesium hydroxide.     

Clean and selective Baeyer-Villiger oxidation of ketones with hydrogen peroxide catalyzed by Sn-palygorskite

An environmentally benign and selective Baeyer-Villiger oxidation system is introduced. Palygorskite-supported Sn complexes were prepared by a simple procedure. Cyclic ketones and acyclic ketones were oxidized by hydrogen peroxide in a reaction catalyzed by palygorskite-supported Sn complexes, affording corresponding lactones or esters with selectivity for the product of 90-99%. The influence of the solvents, reaction temperature, the amount of catalyst used and the reaction time on the catalytic activity and product selectivity were investigated in detail. The catalyst is cheap, easy to be prepared in large scale and can be recycled.     

Heterogeneous Baeyer-Villiger oxidation of ketones with H2O2/nitrile, using Mg/Al hydrotalcite as catalyst

We synthesized a magnesium-aluminium hydrotalcite and used it as a catalyst in the Baeyer-Villiger (BV) oxidation of cyclohexanone with a mixture of 30% aqueous hydrogen peroxide and benzonitrile as oxidant. The hydrotalcite proved an excellent catalyst for the process. The influence of experimental variables was examined in depth in order to bring the working conditions as close as possible to those usable on an industrial scale. We optimized the cyclohexanone/hydrogen peroxide/benzonitrile proportion and used various nitriles, solvents and amounts of catalyst, benzonitrile and methanol proving the most effective nitrile and solvent, respectively, for the intended purpose. The reaction was found to occur to an acceptable extent with other carbonyl compounds as substrates; by exception, α,β-unsaturated carbonyl compounds provided poor results by effect of their undergoing competitive epoxidation of their double bonds.     

Synthesis of novel organoselenium as catalyst for Baeyer-Villiger oxidation with 30% H2O2

A novel diselenide was synthesized in good yield via only four steps from phenol, and was employed as the catalyst for the Baeyer-Villiger oxidation with 30% H₂O₂ to obtain lactones in good yields.     

Baeyer-Villiger oxidation of cyclic ketones over iron-containing mesoporous MCM-48 silica materials

Fe-MCM-48 mesoporous material was found to be a highly active catalyst for the Baeyer-Villiger oxidation of several cyclic ketones. The catalyst could be reused several times without any loss of activity.     

Selective oxidation of naphthalene derivatives with ruthenium catalysts using hydrogen peroxide as terminal oxidant

The selective oxidation of naphthalene and its derivatives to give naphthoquinones has been investigated in detail. The reaction can be carried out effectively in the presence of a catalytic amount of Ru complexes (0.2 mol%) and phase transfer catalysts (PTC) using H₂O₂ as the terminal oxidant and water as the solvent. The effect of different ruthenium complexes, phase transfer catalysts, and the concentration of hydrogen peroxide were studied. Compared to previous procedures for this type of reactions, acidic solvents and high concentration of hydrogen peroxide are not necessary, which makes the reaction more environmentally friendly.     

Tin(IV) bis(perfluoroalkanesulfonyl)amide complex as a highly selective Lewis acid catalyst for Baeyer-Villiger oxidation using hydrogen peroxide in a fluorous recyclable phase

Sn[N(SO₂C₈F₁₇)₂]₄ catalyst was shown to give an excellent yield and selectivity in a fluorous biphasic catalytic system for Baeyer-Villiger oxidation of cyclic ketones by 35% aqueous hydrogen peroxide, a green, safe and cheap oxidant. Furthermore, the catalyst was completely recovered and reused in the fluorous immobilized phase without loss of activity.     

Un-catalyzed oxidation of cyclic ketones by alkaline hexacyanoferrate(III) - Kinetic evidence for the formation of hydrates

Hydrate formation by cyclic ketones confirmed by kinetic and spectral studies shows reduction of hexacyanoferrate(III) after the slow step. Orders and rate constants were confirmed by various methods.     

The Baeyer-Villiger oxidation of ketones with Oxone in the presence of ionic liquids as solvents

Cyclic and linear ketones were readily oxidised with Oxone^® at 40 °C in ionic liquids as solvents and short times (2.5-20 h), affording their corresponding lactones and esters in high yields (65-95%). Both, aprotic and protic ionic liquids were used. The best conversion of ketones and the highest yields of products were obtained with 1-buty-3-methylimidazolium tetrafluoroborate and 1-methylimidazolium acetate as solvents. These ionic liquids were also efficiently recycled in the Baeyer-Villiger reaction without significant loss of activity. Several factors, such as the partial solubility of KHSO₅ in the ionic liquid, its viscosity and the presence of a proton in protic ionic liquids, have an influence on the course of the reaction.     

Enhanced shape selective catalysis of mixed cyclic ketones in aerobic Baeyer-Villiger oxidation with magnetic Cu-Fe3O4 supported mesoporous silica microspheres

Various strategies have been developed to improve the conversion for the Baeyer-Villiger oxidation. However, the catalytic effects of the Baeyer-Villiger oxidation for the mixed ketones are rarely reported, though it is also important for the natural and industrial separation processes. In this report, magnetite Cu modified Fe₃O₄ supported mesoporous silica microspheres (Cu-Fe₃O₄@mSiO₂) have been successfully synthesized by two step direct hydrothermal method (DHT). Over 99% of cyclohexanone conversion was obtained with mild air oxidation and benzaldehyde as sacrificing agent over Cu-Fe₃O₄@mSiO₂. The catalytic system also shows higher conversion rates for small molecular ketones in the mixed ketone reactants, which was attributed to the enhanced mass transfer effect and Fe-Cu composite active sites in the magnetite mesoporous silica microspheres. The catalyst could be recycled for four times with similar catalytic performance, which shows enhanced shape selectivity in aerobic Baeyer-Villiger oxidations for mixed cyclic ketones.     

A new finding in selective Baeyer-Villiger oxidation of α-fluorinated ketones; a new and practical route for the synthesis of α-fluorinated esters

α-Fluorinated esters were effectively prepared by the Baeyer-Villiger oxidation of α-fluorinated ketones with m-chloroperbenzoic acid (m-CPBA) under mild conditions. The yield of the esters was influenced by the choice of solvent, base, and substituent on the aryl group of the ketones. 4-Methoxyphenyl substituted fluoroketones were oxidized almost quantitatively with m-CPBA within 10 min to 12 h at room temperature using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a cosolvent with CH₂Cl₂ (1:1, v/v) and aqueous buffer (KH₂PO₄-NaOH, pH 7.6) as an additive base. The oxidation reaction rates of α-fluorinated ketones were higher than those of the corresponding non-fluorinated ketones. The fluorine atom at α-position of fluoromethyl aryl ketones enhanced the reactivity in the Baeyer-Villiger oxidation.     

Alcohols oxidation with hydrogen peroxide promoted by TPAP-doped ormosils

Organically modified silica gels doped with TPAP (tetra-n-propylammonium perruthenate) are effective catalysts for the oxidation of alcohols by hydrogen peroxide at room temperature, provided that the oxidant H₂O₂ solution is added slowly. The effect of the surface catalyst polarity is the opposite of that found in aerobic alcohols oxidation and is consistent with the polar nature of the primary oxidant.     

Biomimetic oxidation of metribuzin with hydrogen peroxide catalyzed by 5,10,15,20-tetraarylporphyrinatoiron(III) chlorides

The biomimetic oxidation of metribuzin, a pre- and post-emergence herbicide with hydrogen peroxide catalyzed by 5,10,15,20-tetraarylporphyrinatoiron(III) chlorides [TAPFe(III)Cl], has been studied yielding 6-t-butyl-3-methylthio-1,2,4-triazine-5(4H)-one, 4-amino-6-t-butyl-3,5(2H,4H)-dione and 6-t-butyl-1,2,4-triazin-3,5(2H,4H)-dione under various reaction conditions.     

Cobalt(II)-catalyzed oxidation of alcohols into carboxylic acids and ketones with hydrogen peroxide

The oxidation of aliphatic and aromatic alcohols into the corresponding carboxylic acid analogues and ketones has been carried out using 30% H₂O₂ and cobalt(II) complex 1 in good to high yields. The reaction is safe, clean and functions in the absence of additives.     

Effects of microstructure of carbon nanofibers for amperometric detection of hydrogen peroxide

Carbon nanofibers (CNFs) with three microstructures, including platelet-carbon nanofibers (PCNFs), fish-bone-carbon nanofibers (FCNFs), and tube-carbon nanofibers (TCNFs), were synthesized, characterized, and evaluated for electrochemical sensing of hydrogen peroxide. The CNFs studied here show microstructures with various stacked morphologies. The sizes and graphite-layer ordering of the CNFs can be well controlled. Glassy carbon (GC) electrodes modified by CNFs were fabricated and compared for amperometric detection of hydrogen peroxide. Sensors based on PCNFs/GC, FCNFs/GC, and TCNFs/GC were used in the amperometric detection of H₂O₂ in solution by applying a potential of +0.65 V versus Ag/AgCl at the working electrode. The highest electrocatalytic performance was observed for PCNFs/GC among the three types of hydrogen peroxide sensors. The amperometric response of PCNFs/GC retained over 90% of the initial current of the first day up to 21 days. The linear range is from 1.80 × 10⁻⁴ to 2.62 × 10⁻³ M with a correlation coefficient larger than 0.999 and with a detection limit of 4.0 μM H₂O₂ (S/N = 3). The relative standard deviation for detecting 1.80 × 10⁻⁴ M H₂O₂ (N = 8) is 2.1% with an average response of 0.64 μA. The significant diversity of electrocatalytic activity of the CNFs toward the oxidation of hydrogen peroxide may result from the difference of morphologies, textural properties, and crystalline structures.     

Thallimetric photochemical oxidation in titrimetric and spectrophotometric methods for the analysis of mixtures of oxalate and hydrogen peroxide

Thallium(III) in the presence of bromide photochemically oxidizes oxalate and hydrogen peroxide, whereas in the presence of a large excess of chloride, only oxalate is oxidized. Two procedures are based on these observations. In the titrimetric method (applied to mmol amounts of analytes) the thallium(I) formed is determined with bromate. In the spectrophotometric procedure (μmol amounts of analytes) unreduced thallium(III) is determined at 260 nm. In each case measurements are made after reaction under both conditions, so that both analytes can be determined.