Mechanistic study of electrocatalytic oxidation of formic acid at platinum in acidic solution by time-resolved surface-enhanced infrared absorption spectroscopy

Surface-enhanced infrared absorption spectroscopy (SEIRAS) combined with cyclic voltammetry or chronoamperometry has been utilized to examine kinetic and mechanistic aspects of the electrocatalytic oxidation of formic acid on a polycrystalline Pt surface at the molecular scale. Formate is adsorbed on the electrode in a bridge configuration in parallel to the adsorption of linear and bridge CO produced by dehydration of formic acid. A solution-exchange experiment using isotope-labeled formic acids (H(12)COOH and H(13)COOH) reveals that formic acid is oxidized to CO(2) via adsorbed formate and the decomposition (oxidation) of formate to CO(2) is the rate-determining step of the reaction. The adsorption/oxidation of CO and the oxidation/reduction of the electrode surface strongly affect the formic acid oxidation by blocking active sites for formate adsorption and also by retarding the decomposition of adsorbed formate. The interplay of the involved processes also affects the kinetics and complicates the cyclic voltammograms of formic acid oxidation. The complex voltammetric behavior is comprehensively explained at the molecular scale by taking all these effects into account.     

Potential oscillations in galvanostatic electrooxidation of formic acid on platinum: a mathematical modeling and simulation

We have modeled temporal potential oscillations during the electrooxidation of formic acid on platinum on the basis of the experimental results obtained by time-resolved surface-enhanced infrared absorption spectroscopy (J. Phys. Chem. B 2005, 109, 23509). The model was constructed within the framework of the so-called dual-path mechanism; a direct path via a reactive intermediate and an indirect path via strongly bonded CO formed by dehydration of formic acid. The model differs from earlier ones in the intermediate in the direct path. The reactive intermediate in this model is formate, and the oxidation of formate to CO2 is rate-determining. The reaction rate of the latter process is represented by a second-order rate equation. Simulations using this model well reproduce the experimentally observed oscillation patterns and the temporal changes in the coverages of the adsorbed formate and CO. Most properties of the voltammetric behavior of formic acid, including the potential dependence of adsorbate coverages and a negative differential resistance, are also reproduced.     

Formic acid electrooxidation on Pd in acidic solutions studied by surface-enhanced infrared absorption spectroscopy

A mechanistic study of electrocatalytic oxidation of formic acid on Pd in sulfuric and perchloric acids is reported. Surface-enhanced infrared absorption spectroscopy in the attenuated total reflection mode (ATR-SEIRAS) shows the adsorption of CO, bridge-bonded formate, bicarbonate, and supporting anions on the electrode surface. Poisoning of the Pd surface by CO, formed by dehydration of formic acid, is very slow and scarcely affects formic acid oxidation. The anions are adsorbed more strongly in the order of (bi)sulfate > bicarbonate > perchlorate, among which the most strongly adsorbed (bi)sulfate considerably suppresses formic acid oxidation in the double layer region. The oxidation is suppressed also at higher potentials in both acids by the oxidation of the Pd surface. Adsorbed formate is detected only when formic acid oxidation is suppressed. The results show that formate is a short-lived reactive intermediate in formic acid oxidation and is hence detected when its decomposition yielding CO(2) is suppressed. The high electrocatalytic activity of Pd can be ascribed to the high tolerance to CO contamination and also high catalytic activity toward formate decomposition.     

A HREELS study of the adsorption of formic acid on slightly oxidized Nb(110) surface

An investigation has been made on the adsorption and decomposition of formic acid on slightly oxidized Nb(110) surface (0/Nb atom ratio = 0.2) using high resolution electron energy loss spectroscopy (HREELS),and a corresponding surface reaction mode is given.At 140 K,formic acid of low exposure on such an Nb(110) surface decomposed to formate,which bonded on Nb in monodentate configuration,simultaneously some formate decomposed to CO,which adsorbed on the surface.Formic acid multilayers formed when the exposure was high.While the temperature was increased to above 190 K,multilayer formic acid desorbed,and the surface was covered with mon-odentate-bonded formate and CO.In the temperature range of 250-300 K,chemisorbed formate changed from monodentate configuration into bridging configuration and CO molecules disappeared.The decomposition of formate at higher temperatures led to the oxidation of Nb.The formate formed in the high exposure case was so stable that it did not decompose even the temperature wa     

Oxidation of formic acid and carbon monoxide on gold electrodes studied by surface-enhanced Raman spectroscopy and DFT.

The oxidation of formic acid and carbon monoxide was studied at a gold electrode by a combination of electrochemistry, in situ surface-enhanced Raman spectroscopy (SERS), differential electrochemical mass spectrometry, and first-principles DFT calculations. Comparison of the SERS results and the (field-dependent) DFT calculations strongly suggests that the relevant surface-bonded intermediate during oxidation of formic acid on gold is formate HCOO- ad*. Formate reacts to form carbon dioxide via two pathways: at low potentials, with a nearby water to produce carbon dioxide and a hydronium ion; at higher potentials, with surface-bonded hydroxyl (or oxide) to give carbon dioxide and water. In the former pathway, the rate-determining step is probably related to the reaction of surface-bonded formate with water, as measurements of the reaction order imply a surface almost completely saturated with adsorbate. The potential dependence of the rate of the low-potential pathway is presumably governed by the potential dependence of formate coverage. There is no evidence for CO formation on gold during oxidation of formic acid. The oxidation of carbon monoxide must involve the carboxyhydroxyl intermediate, but SERS measurements do not reveal this intermediate during CO oxidation, most likely because of its low surface coverage, as it is formed after the rate-determining step. Based on inconclusive spectroscopic evidence for the formation of surface-bonded OH at potentials substantially below the surface oxidation region, the question whether surface-bonded carbon monoxide reacts with surface hydroxyl or with water to form carboxyhydroxyl and carbon dioxide remains open. The SERS measurements show the existence of both atop and bridge-bonded CO on gold from two distinguishable low-frequency modes that agree very well with DFT calculations.     

Application of in-situ attenuated total reflection-Fourier transform infrared spectroscopy for the understanding of complex reaction mechanism and kinetics: formic acid oxidation on a Pt film electrode at elevated temperatures

The potential of in-situ Fourier transform infrared (FTIR) spectroscopy measurements in an attenuated total reflection configuration (ATR-FTIRS) for the evaluation of reaction pathways, elementary reaction steps, and their kinetics is demonstrated for formic acid electrooxidation on a Pt film electrode. Quantitative kinetic information on two elementary steps, formic acid dehydration and CO(ad) oxidation, and on the contributions of the related pathways in the dual path reaction mechanism are derived from IR spectroscopic signals in simultaneous electrochemical and ATR-FTIRS measurements over a wide temperature range (25-80 degrees C). Linearly and multiply bonded CO(ad) and bridge-bonded formate are the only formic acid related stable reaction intermediates detected. With increasing temperature, the steady-state IR signal of CO(ad) increases, while that of formate decreases. Reaction rates for CO(ad) formation via formic acid dehydration and for CO(ad) oxidation as well as the activation energies of these processes were determined at different temperatures, potentials, and surface conditions (with and without preadsorbed CO from formic acid dehydration) from the temporal evolution of the IR intensities of CO(ad) during adsorption/reaction transients, using an IR intensity-CO(ad) coverage calibration. At potentials up to 0.75 V and temperatures from 25 to 80 degrees C, the "indirect" CO pathway contributes less than 5% (at potentials < or =0.6 V significantly below 1%) to the total Faradaic reaction current, making the "direct" pathway by far the dominant one under the present reaction conditions. Much higher activation energies for CO(ad) formation and CO(ad) oxidation compared with the effective activation energy of the total reaction, derived from the Faradaic currents, support this conclusion.     

Carbon dioxide hydrogenation catalyzed by a ruthenium dihydride: a DFT and high-pressure spectroscopic investigation

Reaction pathways during CO(2) hydrogenation catalyzed by the Ru dihydride complex [Ru(dmpe)(2)H(2)] (dmpe=Me(2)PCH(2)CH(2)PMe(2)) have been studied by DFT calculations and by IR and NMR spectroscopy up to 120 bar in toluene at 300 K. CO(2) and formic acid readily inserted into or reacted with the complex to form formates. Two formate complexes, cis-[Ru(dmpe)(2)(OCHO)(2)] and trans-[Ru(dmpe)(2)H(OCHO)], were formed at low CO(2) pressure (<5 bar). The latter occurred exclusively when formic acid reacted with the complex. A RuHHOCHO dihydrogen-bonded complex of the trans form was identified at H(2) partial pressure higher than about 50 bar. The trans form of the complex is suggested to play a pivotal role in the reaction pathway. Potential-energy profiles along possible reaction paths have been investigated by static DFT calculations, and lower activation-energy profiles via the trans route were confirmed. The H(2) insertion has been identified as the rate-limiting step of the overall reaction. The high energy of the transition state for H(2) insertion is attributed to the elongated Ru--O bond. The H(2) insertion and the subsequent formation of formic acid proceed via Ru(eta(2)-H(2))-like complexes, in which apparently formate ion and Ru(+) or Ru(eta(2)-H(2))(+) interact. The bond properties of involved Ru complexes were characterized by natural bond orbital analysis, and the highly ionic characters of various complexes and transition states are shown. The stability of the formate ion near the Ru center likely plays a decisive role for catalytic activity. Removal of formic acid from the dihydrogen-bonded complex (RuHHOCHO) seems to be crucial for catalytic efficiency, since formic acid can easily react with the complex to regenerate the original formate complex. Important aspects for the design of highly active catalytic systems are discussed.     

A Revisit to the Role of Bridge-adsorbed Formate in the Electrocatalytic Oxidation of Formic Acid at Pt Electrodes (cited: 2)

The mechanism and kinetics of electrocatalytic oxidation of formic acid at Pt electrodes is discussed in detail based on previous electrochemical in-situ ATR-FTIRS data [Langmuir 22, 10399 (2006) and Angewa. Chem. Int. Ed. 50, 1159 (2011)]. A kinetic model withformic acid adsorption (and probably the simultaneous C-H bond activation) as the rate determining step, which contributes to the majority of reaction current for formic acid oxi-dation, was proposed for the direct pathway. The model simulates well the IR spectroscopic results obtained under conditions where the poisoning effect of carbon monoxide (CO) is negligible and formic acid concentration is below 0.1 mol/L. The kinetic simulation predicts that in the direct pathway formic acid oxidation probably only needs one Pt atom as active site, formate is the site blocking species instead of being the active intermediate. We review in detail the conclusion that formate pathway (with either 1st or 2nd order reaction kinetics) is the direct pathway, possible origins for the discrepancies are pointed out.     

In situ FTIR Study of the Adsorption of Formaldehyde, Formic Acid, and Methyl Formiate at the Surface of TiO2 (Anatase)

The catalytic properties of TiO₂ (anatase) in the reactions of formaldehyde oxidation and formic acid decomposition are examined. At 100–150°C, formaldehyde is converted into methyl formate with high selectivity regardless of the presence of oxygen in the reaction mixture. Formic acid is decomposed to CO and water. Surface compounds formed in the reactions of formaldehyde, formic acid, and methyl formate with TiO₂ (anatase) are identified by in situ FTIR spectroscopy. In a flow of a formaldehyde-containing mixture at 100°C, H-bonded HCHO, dioxymethylene species, bidentate formate, and coordinatively bonded HCHO are observed on the TiO₂ surface. In the adsorption of formic acid, H-bonded HCOOH and two types of formates (bidentate and unsymmetrical formates) are formed. In the adsorption of methyl formate, H-bonded HCOOCH₃, HCOOCH₃ coordinatively bonded via the carbonyl oxygen, and bidentate formate are identified.     

Bridge-bonded formate: active intermediate or spectator species in formic acid oxidation on a Pt film electrode?

We present and discuss the results of an in situ IR study on the mechanism and kinetics of formic acid oxidation on a Pt film/Si electrode, performed in an attenuated total reflection (ATR) flow cell configuration under controlled mass transport conditions, which specifically aimed at elucidating the role of the adsorbed bridge-bonded formates in this reaction. Potentiodynamic measurements show a complex interplay between formation and desorption/oxidation of COad and formate species and the total Faradaic current. The notably faster increase of the Faradaic current compared to the coverage of bridge-bonded formate in transient measurements at constant potential, but with different formic acid concentrations, reveals that adsorbed formate decomposition is not rate-limiting in the dominant reaction pathway. If being reactive intermediate at all, the contribution of formate adsorption/decomposition to the reaction current decreases with increasing formic acid concentration, accounting for at most 15% for 0.2 M DCOOH at 0.7 VRHE. The rapid build-up/removal of the formate adlayer and its similarity with acetate or (bi-)sulfate adsorption/desorption indicate that the formate adlayer coverage is dominated by a fast dynamic adsorption-desorption equilibrium with the electrolyte, and that formate desorption is much faster than its decomposition. The results corroborate the proposal of a triple pathway reaction mechanism including an indirect pathway, a formate pathway, and a dominant direct pathway, as presented previously (Chen, Y. X.; et al. Angew. Chem. Int. Ed. 2006, 45, 981), in which adsorbed formates act as a site-blocking spectator in the dominant pathway rather than as an active intermediate.     

Pathways for methanol steam reforming involving adsorbed formaldehyde and hydroxyl intermediates on Cu(111): density functional theory studies

Plane-wave density functional theory calculations have been carried out to explore possible pathways in methanol steam reforming (MSR) on Cu(111). We focus on reactions involving the adsorbed formaldehyde intermediate (CH(2)O) produced by methanol decomposition and the surface hydroxyl (OH) species generated by dissociative adsorption of H(2)O. Several possible pathways leading to the H(2) + CO(2) products have been identified. The two most likely pathways involve the formate (CHOO), rather than the carboxyl (COOH), intermediate, and they possess barriers lower than that of the rate-limiting step of MSR, namely the dehydrogenation of adsorbed methoxyl (CH(3)O) species.     

Computational study on kinetics and mechanisms of unimolecular decomposition of succinic acid and its anhydride

The mechanisms and kinetics of unimolecular decomposition of succinic acid and its anhydride have been studied at the G2M(CC2) and microcanonical RRKM levels of theory. It was shown that the ZsgsZ conformer of succinic acid, with the Z-acid form and the gauche conformation around the central C-C bond, is its most stable conformer, whereas the lowest energy conformer with the E-acid form, ECGsZ, is only 3.1 kcal/mol higher in energy than the ZsgsZ. Three primary decomposition channels of succinic acid producing H2O + succinic anhydride with a barrier of 51.0 kcal/mol, H2O + OCC2H3COOH with a barrier of 75.7 kcal/mol and CO2 + C2H5COOH with a barrier of 71.9 kcal/mol were predicted. The dehydration process starting from the ECGCZ-conformer is found to be dominant, whereas the decarboxylation reaction starting from the ZsgsZ-conformer is only slightly less favorable. It was shown that the decomposition of succinic anhydride occurs via a concerted fragmentation mechanism (with a 69.6 kcal/mol barrier), leading to formation of CO + CO2 + C2H4 products. On the basis of the calculated potential energy surfaces of these reactions, the rate constants for unimolecular decomposition of succinic acid and its anhydride were predicted. In addition, the predicted rate constants for the unimolecular decomposition of C2H5COOH by decarboxylation (giving C2H6 + CO2) and dehydration (giving H3CCHCO + H2O) are in good agreement with available experimental data.     

Role of Bridge-bonded Formate in Formic Acid Dehydration to CO at Pt Electrode: Electrochemial in-situ Infrared Spectroscopic Study

Formic acid (HCOOH) decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded formate (HCOOb) is the reactive intermediate for CO_ad for-mation from HCOOH molecules. When switching from HCOOH-free solution to HCOOH-containing solution at constant potential (E=0.4 V vs. RHE), we found that immediately upon solution switch CO_ad formation rate is the highest, while surface coverage of formate is zero, then after CO_ad formation rate decreases, while formate coverage reaches a steady state coverage quickly within ca. 1 s. Potential step experiment from E=0.75 V to 0.35 V, reveals that formate band intensity drops immediately right after the potential step, while the CO_ad signal develops slowly with time. Both facts indicate that formate is not the reactive intermediate for formic acid dehydration to CO.     

In situ FTIR studies on the effect of temperature on the electro-oxidation of small organic molecules at the Ru(0001) electrode

The adsorption and electro-oxidation of formaldehyde, formic acid and methanol at the Ru(0001) electrode in perchloric acid solution have been studied as a function of temperature, potential and time using in situ FTIR spectroscopy, and the results interpreted in terms of the surface chemistry of the Ru(000 1) electrode and compared to those obtained during our previous studies on the adsorption of CO under the same conditions. It was found that no dissociative adsorption or electro-oxidation of methanol takes place at Ru(0001) at potentials < 900 mV vs. Ag/AgCl, and at all three temperatures employed, 10, 25 and 50 degrees C. However, both formaldehyde and formic acid did undergo dissociative adsorption, even at -200 mV, to form linear (CO(L)) and 3-fold-hollow (COH) binding CO adsorbates. In contrast to the adsorption of CO, it was found that increasing the temperature to 50 degrees C markedly increased the amount of CO adsorbates formed on the Ru(0001) surface from the adsorption of both formaldehyde and formic acid. On increasing the potential, the electro-oxidation of the CO adsorbates to CO2 took place via reaction with the active (1 x 1)-O oxide. Formic acid was detected as a partial oxidation product during formaldehyde electro-oxidation. At all three temperatures employed, it was found that adsorbed CO species were formed from the adsorption of both formic acid and formaldehyde, and were oxidised to CO2 faster than was observed in the experiments involving CO adsorbed from CO(g), suggesting a higher mobility of the CO adsorbates formed from the adsorption of the HCOOH and HCHO. At potentials > 1000 mV, both the oxidation of formic acid to CO2 and the oxidation of formaldehyde to both CO2 and formic acid were significantly increased, and the oxidation of methanol to CO2 and methyl formate was observed, all of which were attributed to the formation of an active RuO2 phase on the Ru(0001) surface.     

Photodegradation of toluene over TiO(2-x)N(x) under visible light irradiation

We report the photooxidation of toluene over nitrogen doped TiO(2) (TiO(2-x)N(x)) under visible light irradiation. The photocatalytic oxidation of toluene in air over TiO(2-x)N(x) powders was studied using diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), gas chromatography (GC), ion chromatography (IC), and gas chromatography mass spectrometry (GC-MS), focusing on the photocatalytic decomposition processes of toluene. Results obtained indicate that toluene, weakly adsorbed on the catalyst surface, is initially photooxidized to benzaldehyde which adsorbs onto the TiO(2-x)N(x) surface more strongly, leading to the formation of ring-opening products such as carboxylic acids and aldehydes. No gaseous intermediates were detected during the photooxidation. Major intermediates adsorbed at the catalyst surface were oxalic acid, (COOH)(2), acetic acid, CH(3)COOH, formic acid, HCOOH, and pyruvic acid, CH(3)COCOOH, whereas more complicated carboxylic species, including propionic acid, CH(3)CH(2)COOH, isovaleric acid, (CH(3))(2)CHCH(2)COOH, and succinic acid, (CH(2)COOH)(2), were also found in the early stage of the photooxidation. These intermediate products were gradually photodegraded to CO(2) and H(2)O under visible light irradiation.     

The thermal decomposition of metal formates. II. Solid state thermal decomposition studies on magnesium formate dihydrate

Magnesium formate dihydrate has been synthesized by the action of formic acid on anhydrous magnesium oxide. This product analysed as Mg(COOH)₂ · 2H₂O. Its mode of thermal decomposition has been studied by thermal methods of analysis including simultaneous DTA/mass spectrometry. Nitrogen adsorption surface area of the solid products at various stages of its decomposition have been obtained. X-Ray diffraction and scanning electron micrographs have also been used to interpret the results. The decomposition of magnesium formate took place in three stages, which includes a phase change, at 265°C. The endotherm at 430°C changed to an exotherm in the presence of air; it corresponded to the decomposition of a new anhydrous phase of magnesium formate. The effect of the sample holder and changing atmospheres on the DSC analysis has been investigated. A scheme is presented for the thermal decomposition.     

Synthesis and thermolytic behavior of tin(IV) formates: in search of recyclable metal-hydride systems

The synthesis and characterization of the series of organotin formates together with their thermolytic behavior are described. The diformate Bu(n)(2)Sn{OC(O)H}(2) (1) was synthesized by the reaction of Bu(n)(2)SnH(2) with formic acid. The triorganotin monoformate compounds R(3)SnOC(O)H (R = Cy (cyclohexyl)) 3, Mes, (mesityl, 2,4,6-trimethylphenyl) 4, and Dmp (2,6-dimethylphenyl 5) were obtained by the reaction of R(3)SnOH with formic acid. Their X-ray crystal structures along with that of the previously reported formate (PhCH(2))(3)SnOC(O)H (2) were determined. The diformate 1 exhibits an extended two-dimensional polymeric structure in which six-coordinate tin centers are linked by formate bridges. The tribenzyltin formate (2) possesses a chain structure in which the five-coordinate Sn(CH(2)Ph)(3) units are bridged by formate ions. The cyclohexyl derivative 3 was observed to have a similar structure. In contrast, the Mes and Dmp derivatives 4 and 5 support monomeric structures in which the four-coordinate tin atom is bound to an oxygen of the formate ligand. Heating the compounds in various high boiling solvents produced no decomposition up to 120 °C in the case of 1 and refluxing a solution of 2 or 3 in mesitylene or diglyme left the starting material mostly unchanged, although 3 decomposed to an insoluble orange solid in refluxing decalin. In contrast, the heating of 4 and 5 in refluxing mesitylene led to elimination of CO to give the tin hydroxides. The results are in contrast to the known thermolytic behavior of R(3)SnOC(O)H (R = Pr(n) or Bu(n)) complexes, which eliminate CO(2) to generate R(3)SnH. Compounds 3-5 are rare examples of structurally characterized tin formates.     

Towards a rational design of ruthenium CO2 hydrogenation catalysts by Ab initio metadynamics

Complete reaction pathways relevant to CO2 hydrogenation by using a homogeneous ruthenium dihydride catalyst ([Ru(dmpe)2H2], dmpe=Me2PCH2CH2PMe2) have been investigated by ab initio metadynamics. This approach has allowed reaction intermediates to be identified and free-energy profiles to be calculated, which provide new insights into the experimentally observed reaction pathway. Our simulations indicate that CO2 insertion, which leads to the formation of formate complexes, proceeds by a concerted insertion mechanism. It is a rapid and direct process with a relatively low activation barrier, which is in agreement with experimental observations. Subsequent H2 insertion into the formate--Ru complex, which leads to the formation of formic acid, instead occurs via an intermediate [Ru(eta2-H2)] complex in which the molecular hydrogen coordinates to the ruthenium center and interacts weakly with the formate group. This step has been identified as the rate-limiting step. The reaction completes by hydrogen transfer from the [Ru(eta2-H2)] complex to the formate oxygen atom, which forms a dihydrogen-bonded Ru--HHO(CHO) complex. The activation energy for the H2 insertion step is lower for the trans isomer than for the cis isomer. A simple measure of the catalytic activity was proposed based on the structure of the transition state of the identified rate-limiting step. From this measure, the relationship between catalysts with different ligands and their experimental catalytic activities can be explained.     

Pt/TiO2光催化分解甲酸制氢反应的原位红外光谱研究

用原位红外光谱研究了无氧条件下Pt/TiO2光催化甲酸制氢反应机理.结果表明,物理吸附的甲酸物种在光催化反应过程中向甲酸根离子转化,而甲酸根离子则逐渐向碳酸盐物种转化.水蒸气的添加显著促进了甲酸在Pt/TiO2上光催化反应的进行,并提高了产氢效率.提出了该光催化反应的可能机理.     

Oxygen vacancy promoting catalytic dehydration of formic acid on TiO2(110) by in situ scanning tunneling microscopic observation

The catalytic dehydration reaction processes of formic acid on a TiO2(110) surface at 350 K have been studied to visualize reaction intermediates and their dynamic behaviors by scanning tunneling microscopy. Three types of configurations of adsorbed formates on the surface were identified by their shapes and positions in STM images. Successive STM observations revealed transformations among the three configurations, i.e., bridge formate on a 5-fold coordinated Ti4+ row, bridge formate on an oxygen vacancy site with an oxygen atom of formate and on a 5-fold coordinated Ti4+ ion and with the other formate oxygen atom, and a monodentate formate on an oxygen vacancy site with an oxygen atom of formate. The decomposition of the monodentate formate to carbon monoxide and hydroxyl was also imaged, which is a rate-determining step in the catalytic dehydration of formic acid. Combined with first-principle DFT calculations, the overall reaction processes of the catalytic dehydration of formic acid on the surface have been elucidated. Oxygen vacancies on the surface that can be produced by dehydration of two hydroxyls in situ under the catalytic reaction conditions are essential for the reaction.