Shape-persistent nanosize organometallic complexes: synthesis and application in a nanofiltration membrane reactor

Shape-persistent multi(NCN-palladium and/or -platinum) complexes having one- (5 and 6), two- (1 and 2), and three-dimensional (3 and 4) geometries were prepared in moderate to good yields. Two different approaches were used to construct the multimetallic materials: (i) the construction of the multisite ligands followed by the permetalation step and (ii) selective and mild one-pot coupling of monometallic buiding blocks to a multifunctional shape-persistent organic core molecule. The first approach was used to prepare the palladated and/or platinated tris- (2) and bis(NCN-pincer) (5) complexes, while the second approach afforded the palladated and platinated octakis- (3) and dodecakis(NCN-pincer) (4) complexes. Complexes 1-6 were subjected to nanofiltration (NF) experiments in order to investigate the influence of rigidity and geometry on the retention of these molecules by NF membranes. For this purpose, the corresponding (NCN-Pt-X)(n)() complexes (1c-4c, 5, and 6) were used since exposing these complexes to sulfur dioxide in solution resulted in the formation of bright orange complexes, allowing the use of UV/vis spectroscopy to accurately determine the concentrations of 1-6 in both retentate and permeate. Using the MPF-60 (MWCO = 400) NF-membrane, retention rates of 82.4 (6), 93.9 (1c), 98.7 (2c), 99.5 (3c), 99.6 (5), and >99.9% (4c) were found, while 2c and 4c in combination with the MPF-50 (MWCO = 700) NF-membrane were retained in 97.6 and 99.9%, respectively. A clear relationship is observed between the dimensions calculated by molecular modeling and the retention rates of 1-6. The one-dimensional bis(pincer-platinum) complex 5, however, shows an unexpectedly high retention rate (99.6%) that can be due to precipitation of the complex in the membrane (clogging of the membrane) and/or to the formation of larger aggregates near the membrane. In addition, comparison of 2 and 4 with flexible nickelated G0- and G1-dendrimers with similar dimensions proved that a high degree of rigidity in the backbone of macromolecular complexes indeed leads to more efficient retentions of these multimetallic materials by NF-membranes.     

Continuous synthesis and purification by direct coupling of a flow reactor with simulated moving-bed chromatography

Continuous synthesis meets continuous purification to produce pure products from crude reaction mixtures. In the nucleophilic aromatic substitution of 2,4-difluoronitrobenzene with morpholine the desired monosubstituted product can be continuously separated from the byproducts in a purity of over 99 % by coupling a flow reactor to a simulated moving bed (SMB) chromatography module.     

Efficient nucleophilic substitution of halopyridines using ethanol as solvent with microwave heating: synthesis of 2-aminoethylsulfanylpyridines

Abstract

Aminoethylsulfanylpyridine derivatives are important ligands used in medicinal chemistry, sensing devices, catalysis, and separation science. This paper reports the important finding that very high isolated yields of 2-aminoethyl-sulfanylpyridine isomers and substituted derivatives can be achieved by carrying out the synthesis with halopyridines using ethanol as both a solvent and reagent with microwave heating for short reaction times. Compared to the previous approaches employed for the synthesis of 2-aminoethylsulfanylpyridine derivatives, where yields can be very variable depending on the nature and position of the substituents in the halopyridine ring, the described procedures are more versatile and should be more broadly applicable to the nucleophilic substitution of halopyridines in general.     

Polyfunctional molecules in processes of aromatic nucleophilic substitution 3. Pentaf luoropyridines as scaffolds for synthesis of liquid-phase combinatorial libraries based on S N Ar processes

A possibility of using polyfluorinated pyridines as multiply modified molecules, i.e., scaffolds, in processes of aromatic nucleophilic substitution (S _N Ar) for the synthesis of liquid-phase combinatorial libraries was studied. The real and “virtual” combinatorial libraries of diaryl ethers were synthesized by the reactions of pentafluoropyridine with phenol and its derivatives. Some criteria for the estimation of the quality of the libraries were formulated. A rational methodology for the preparation of representative combinatorial mixtures on the basis of processes of the S _N Ar type in polyfluorinated arenes was proposed. The libraries can be used in highly efficient biological screening of low-molecular-weight regulators of transferase functioning. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 945–950, May, 2007.     

Reinvestigation of the noncatalyzed coupling of aryllithium with haloarene: a novel aromatic nucleophilic substitution pathway

Noncatalyzed coupling reactions of aryllithiums and haloarenes proceed not only through the well-known aryne route but also, in some cases, through a novel addition-elimination pathway. Indeed, ortho-chloro- and ortho-bromomethoxyarenes lead selectively to the corresponding ortho-biaryls through a chelation-driven aromatic nucleophilic substitution pathway. Contrary to common belief, such noncatalyzed coupling reactions often proceed with high regioselectivity and high yield. These results underline the potency of such simple reactions and open up a straightforward access to a wide range of biaryl structures; this also appears particularly useful for large-scale and biaryl building-block syntheses, as only cheap and readily available substrates are involved.     

Preparation,characterization and application of a novel thermal stable composite nanofiltration membrane

A thermal stable composite membrane was prepared by interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on poly(phthalazinone ether amide) (PPEA) ultrafiltration membrane. The effect of reaction parameters on the performance of composite membranes was studied and optimized. The surface morphologies of the composite membrane and the substrate were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The rejection of optimized composite membrane for dyes Congo red (CGR) and Acid chrome blue K (ACBK), the molecular weight (MW) of which is over 400, was over 99.2%, with a flux at about 180 L m⁻² h⁻¹. While the rejection for NaCl was only 18.2% with a flux over 270 L m⁻² h⁻¹, when tested at 1.0 MPa 60 °C. The composite membrane was applied in the desalination-purification experiment of dye ACBK and NaCl mixed solution. The flux of the membrane increased obviously as the operation pressure and/or temperature increased, while the rejection for dye was constant and kept over 99.3%. The purification experiments were accomplished effectively at 1.0 MPa, 80 °C. Only after five rounds of desalination-concentration experiment, about 160 min, the salt mixed in dye solution was fully removed. The initial flux of the eighth cycle was about 254 L m⁻² h⁻¹, which was only 20 L m⁻² h⁻¹ lower than that of the first round. The rejection of the membrane was constant and kept over 99.3% through out the eight cycles of purification experiment.     

Perfluoropyridine: Discovery,Chemistry, and Applications in Polymers and Material Science

Perfluoropyridine (PFPy) is an organofluorine compound that has been employed for a variety of applications, from straightforward chemical synthesis to more advanced functions, such as fluorinated networks and polymers. This can be directly attributed to the highly reactive nature of PFPy, especially towards nucleophilic aromatic substitution (SNAr). The aim of this review is to highlight the discovery and synthesis of PFPy, discuss its reactive nature towards SNAr, and to summarize known reports of the utilization and thermal analysis of PFPy containing fluoropolymers and fluorinated network materials.     

Acid-catalyzed nucleophilic aromatic substitution: experimental and theoretical exploration of a multistep mechanism

The mechanism for the acid-mediated substitution of a phenolic hydroxyl group with a sulfur nucleophile has been investigated by a combination of experimental and theoretical methods. We conclude that the mechanism is distinctively different in nonpolar solvents (i.e., toluene) compared with polar solvents. The cationic mechanism, proposed for the reaction in polar solvents, is not feasible and the reaction instead proceeds through a multistep mechanism in which the acid (pTsOH) mediates the proton shuffling. From DFT calculations, we found a rate-determining transition state with protonation of the hydroxyl group to generate free water and a tight ion pair between a cationic protonated naphthalene species and a tosylate anion. Kinetic experiments support this mechanism and show that, at moderate concentrations, the reaction is first order with respect to 2-naphthol, n-propanethiol, and p-toluenesulfonic acid (pTsOH). Experimentally determined activation parameters are similar to the calculated values (Delta H exp not equal =105+/-9, Delta H calcd not equal =118 kJ mol(-1); Delta G exp not equal =112+/-18, Delta G calcd not equal =142 kJ mol(-1)).     

An application of arene–iron chemistry in the synthesis of a novel liquid crystalline polymer

Arene–iron chemistry was applied in the synthesis of a novel liquid crystalline polymer. The chemistry, which is based on iron cyclopentadienyl (FeCp) arene complexes, allows sequential nucleophilic substitution of the chlorides from 1,3-dichlorobenzene–FeCp complex and photolytic decomplexation of the products to afford asymmetrical aryl ethers. This methodology provides easy access to novel polyether-esters, and is potentially useful in the synthesis of various functional polyarylates. © 1997 John Wiley & Sons, Inc.     

Phthalide as an activating group for the synthesis of poly(aryl ether phthalide)s by nucleophilic aromatic substitution

The phthalide ring was examined as an activating group for nucleophilic aromatic substitution. The proposed mechanism by which activation occurs is through a ring opening of the phthalide ring to form a Meisenheimer‐like σ complex. 3,3‐Bis(4‐fluorophenyl)phthalide was synthesized and examined under different reaction conditions to determine its suitability for polymer formation. Semiempirical calculations at the PM3 level suggested that 3,3‐bis(4‐fluorophenyl)phthalide is only moderately activated, whereas ¹H, ¹³C, and ¹⁹F NMR spectroscopy suggested that the monomer was not sufficiently activated for nucleophilic aromatic substitution. However, low‐molecular‐weight polymers (number‐average molecular weight < 7000 g/mol) were produced from bisphenol A, hydroquinone, and phenolphthalein. The polymers were characterized by gel permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, NMR spectroscopy, and differential scanning calorimetry. The polymers displayed relatively high glass‐transition temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3046–3054, 2002     

[Bmim]PF6 and BF4 ionic liquids as novel and recyclable reaction media for aromatic amination

Activated aryl halides undergo smooth nucleophilic substitution reactions with secondary amines in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquids (ILs) at room temperature to afford the corresponding arylamines in excellent yields under mild and neutral conditions.     

N-Substituted trifluoroacetimidoyl halides: synthesis and properties

N-Substituted trifluoroacetimidoyl halides in ionic-type transformations readily undergo nucleophilic substitution and dehydrofluorination rather than 1,3-dehydrohalogenation to give nitrile ylides.     

New-generation biomedical materials:Peptide dendrimers and their application in biomedicine

Peptide dendrimers are attractive synthetic polymers and have been widely used as a new generation of biomaterials in recent years.Peptide dendrimers,as well as general dendrimers,may be synthesized to reach nano sizes,and display well-defined architectures,highly-branched structures,high density of functional terminal groups,and controllable molecular weights.On the other hand,peptide dendrimers have properties similar to proteins and some special characteristics,such as good biocompatibility,water solubil...     

新型生物医用材料: 肽类树枝状大分子及其生物医学应用

肽类树枝状大分子是近年来发展起来的一类新型生物医用高分子材料, 它在具有普通树枝状大分子的特征如规整性、高度支化、表面呈现高密度功能团、尺度为纳米级、通过可控制备可得到单一分子量等之外, 同时还具有类似蛋白一样的球状结构、好的生物相容性、水溶性、耐蛋白酶水解、生物降解等独特的性能. 肽类树枝状大分子的上述特点, 使其在生物医学应用中显示出诱人的前景. 本综述从肽类树枝状大分子的制备出发、详尽介绍了肽类树枝状大分子的功能化及其在疾病诊断和治疗中的应用等方面的研究进展, 籍此推动肽类树枝状大分子在生物医学领域的研究与开发.     

p-Iodinations in hydrocarbon media: continuous flow reactor application

Regiospecific iodination of aryl amines, that is, aryl compounds possessing strong electron donating groups (EDG’s) in the p-position, is described. This procedure features not only the unique use of hydrocarbon media for such substitutions but also the absence of any oxidants aside from iodine itself. Further potential of this hydrocarbon media based electrophilic aromatic substitution is demonstrated by the coupling of the iodination with an in situ halogen/lithium exchange and product forming nucleophilic addition in a batch process. The protocol was ultimately scaled to a continuous flow reactor using an isolated p-iodoarylamine. Constituted as described, these procedures possess enhanced atom-economical, green and safety aspects compared to existing literature protocols.     

Reactions of 5-dialkylamino-1,2,3-thiadiazole-4-carbaldehydes with amines as a method for the synthesis of 1,2,3-triazole-4-carbothioamides

A method for the synthesis of previously inaccessible 5-dialkylamino-substituted 1,2,3-thiadiazole-4-carbaldehydes was developed. Ring transformation in these compounds induced by primary aliphatic and aromatic amines, hydroxylamines, and N-substituted hydrazines resulted in the synthesis of a broad range of 1,2,3-triazole-4-carbothioamide.     

Multicomponent reaction of amine,carbon disulfide,and fluoronitrobenzene via nucleophilic attack on the fluorinated carbon for the synthesis of nitrophenyl methylcarbamodithioates

In this paper, multicomponent reaction of amine, carbon disulfide and fluoronitrobenzene is reported for the synthesis of nitrophenyl methylcarbamodithioate derivatives. The method is based on the nucleophilic attack of the activated methylcarbamodithioate salt to fluoronitrobenzene. Several starting materials are tested and successfully produced the corresponding nitrophenyl methylcarbamodithioate. A possible mechanism for the reaction is suggested.     

Silicon-phthalocyanine-cored fullerene dendrimers: synthesis and prolonged charge-separated states with dendrimer generations

Silicon-phthalocyanine-cored fullerodendrimers with up to eight fullerene substituents (SiPc-n C(60); n=2, 4, and 8) have been synthesized. Photophysical properties of newly synthesized SiPc-n C(60) have been investigated by time-resolved fluorescence and transient absorption analysis with pulsed laser light. Laser photolysis measurements suggest the occurrence of a charge-separation process from (1)SiPc* to the C(60) subunits. The nanosecond transient absorption spectra in the near-IR region indicate that the lifetimes of the formed radical ion pairs are prolonged on the order of SiPc-8 C(60)>SiPc-4 C(60)>SiPc-2 C(60), which may be related to the electron migration among the C(60) subunits. The usefulness of SiPc-n C(60) as light-harvesting systems, evaluated as a ratio of the rates of charge recombination to those of charge separation, increases markedly with the dendrimer generation.