Trans --> cis isomerization of trans-[(dppm)2Ru(H)(L)][BF4] (L = P(OR)3) complexes: preparation of cis-[(dppm)2Ru(eta2-H2)(L)][BF4]2

A series of new dicationic dihydrogen complexes of ruthenium of the type cis-[(dppm)(2)Ru(eta(2)-H(2))(L)][BF(4)](2) (dppm = Ph(2)PCH(2)PPh(2); L = P(OMe)(3), P(OEt)(3), PF(O(i)Pr)(2)) have been prepared by protonating the precursor hydride complexes cis-[(dppm)(2)Ru(H)(L)][BF(4)] (L = P(OMe)(3), P(OEt)(3), P(O(i)Pr)(3)) using HBF(4).Et(2)O. The cis-[(dppm)(2)Ru(H)(L)][BF(4)] complexes were obtained from the trans hydrides via an isomerization reaction that is acid-accelerated. This isomerization reaction gives mixtures of cis and trans hydride complexes, the ratios of which depend on the cone angles of the phosphite ligands: the greater the cone angle, the greater is the amount of the cis isomer. The eta(2)-H(2) ligand in the dihydrogen complexes is labile, and the loss of H(2) was found to be reversible. The protonation reactions of the starting hydrides with trans PMe(3) or PMe(2)Ph yield mixtures of the cis and the trans hydride complexes; further addition of the acid, however, give trans-[(dppm)(2)Ru(BF(4))Cl]. The roles of the bite angles of the dppm ligand as well as the steric and the electronic properties of the monodentate phosphorus ligands in this series of complexes are discussed. X-ray crystal structures of trans-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], cis-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], and cis-[(dppm)(2)Ru(H)(P(O(i)Pr)(3))][BF(4)] complexes have been determined.     

Transition metal complexes of the chelating phosphine borane ligand Ph2PCH2Ph2P.BH3

Chromium and ruthenium complexes of the chelating phosphine borane H(3)B.dppm are reported. Addition of H(3)B.dppm to [Cr(CO)(4)(nbd)](nbd = norbornadiene) affords [Cr(CO)(4)(eta1-H(3)B.dppm)] in which the borane is linked to the metal through a single B-H-Cr interaction. Addition of H(3)B.dppm to [CpRu(PR(3))(NCMe)(2)](+)(Cp =eta5)-C(5)H(5)) results in [CpRu(PR(3))(eta1-H(3)B.dppm)][PF(6)](R = Me, OMe) which also show a single B-H-Ru interaction. Reaction with [CpRu(NCMe)(3)](+) only resulted in a mixture of products. In contrast, with [Cp*Ru(NCMe)(3)](+)(Cp*=eta5)-C(5)Me(5)) a single product is isolated in high yield: [Cp*Ru(eta2-H(3)B.dppm)][PF(6)]. This complex shows two B-H-Ru interactions. Reaction with L = PMe(3) or CO breaks one of these and the complexes [Cp*Ru(L)(eta1-H(3)B.dppm)][PF(6)] are formed in good yield. With L = MeCN an equilibrium is established between [Cp*Ru(eta2-H(3)B.dppm)][PF(6)] and the acetonitrile adduct. [Cp*Ru (eta2-H(3)B.dppm)][PF(6)] can be considered as being "operationally unsaturated", effectively acting as a source of 16-electron [Cp*Ru (eta1-H(3)B.dppm)][PF(6)]. All the new compounds (apart from the CO and MeCN adducts) have been characterised by X-ray crystallography. The solid-state structure of H(3)B.dppm is also reported.     

Thermal isomerization of ruthenium hydride compounds containing asymmetric bidentate pyrrole‐imine ligands

A series of ruthenium hydride compounds containing substituted bidentate pyrrole‐imine ligands were synthesized and characterized. Reacting RuHCl(CO)(PPh₃)₃ with one equivalent of [C₄H₃NH(2‐CH=NR)] in ethanol in the presence of KOH gave compounds {RuH(CO)(PPh₃)₂[C₄H₃N(2‐CH=NR)]} where trans‐Py‐Ru‐H 1, R = CH₂CH₂C₆H₉; cis‐Py‐Ru‐H 2, R = Ph‐2‐Me; and cis‐Py‐Ru‐H 3, R = C₆H₁₁. Heating trans‐Py‐Ru‐H 1 in toluene at 70°C for 12 hr resulted a thermal conversion of the trans‐Py‐Ru‐H 1 into its cis form, {RuH(CO)(PPh₃)₂[C₄H₃N(2‐CH=NCH₂CH₂C₆H₉)]} (cis‐Py‐Ru‐H 1) in very high yield. The ¹H NMR spectra of trans‐Py‐Ru‐H 1, cis‐Py‐Ru‐H 2, cis‐Py‐Ru‐H 3, and cis‐Py‐Ru‐H 1 all show a typical triplet at ca. δ–11 for the hydride. The trans and cis form indicate the relative positions of pyrrole ring and hydride. The geometries of trans‐Py‐Ru‐H 1, cis‐Py‐Ru‐H 1, and cis‐Py‐Ru‐H 3 are relatively similar showing typical octahedral geometries with two PPh₃ fragments arranged in trans positions.     

Spectral Properties of Ruthenium(II) Mixed-Ligands Complexes with 2,2'-Bipyridyl and Phosphines

Spectral-kinetic luminescence characteristics of the complexes cis-[Ru(bpy)(dppe)X2], cis- [Ru(bpy)2(PPh₃)X](BF₄) and cis-[Ru(bpy)₂X₂] [bpy = 2,2'-bipyridyl, dppe = 1,2-bis(diphenylphosphino)ethane, PPh₃ is triphenylphosphine, X = NO₂ ^- and CN^-] in the ethanol-methanol 4:1 mixtures and adsorbed on the oxide SiO₂ or porous polyacrylonitrile polymer surface were studied. Luminescence and luminescence exitation spectra were registered at 77 and 293 K in 230-750 nm range and the luminescence decay time was measured. Introduction of phosphine ligands to the ruthenium(II) bipyridyl complexes inner sphere leads to rise in singlet and triplet state energy at the charge transfer from Ru(II) to 2,2'-bipyridyl in the series [Ru(bpy)₂X₂] < Ru(bpy)₂(PPh₃)X](BF₄) < [Ru(bpy)(dppe)X₂]. The complex adsorption on SiO₂ or polyacrylonitrile surface affects noticeably the luminescence spectro-kinetic characteristics.     

Metal-metal charge transfer and solvatochromism in cyanomanganese carbonyl complexes of ruthenium and osmium

The complexes [(H3N)5Ru(II)(mu-NC)Mn(I)Lx]2+, prepared from [Ru(OH2)(NH3)5]2+ and [Mn(CN)L(x)] {L(x) = trans-(CO)2{P(OPh)3}(dppm); cis-(CO)2(PR3)(dppm), R = OEt or OPh; (PR3)(NO)(eta-C5H4Me), R = Ph or OPh}, undergo two sequential one-electron oxidations, the first at the ruthenium centre to give [(H3N)5Ru(III)(mu-NC)Mn(I)Lx]3+; the osmium(III) analogues [(H3N)5Os(III)(mu-NC)Mn(I)Lx]3+ were prepared directly from [Os(NH3)5(O3SCF3)]2+ and [Mn(CN)Lx]. Cyclic voltammetry and electronic spectroscopy show that the strong solvatochromism of the trications depends on the hydrogen-bond accepting properties of the solvent. Extensive hydrogen bonding is also observed in the crystal structures of [(H3N)5Ru(III)(mu-NC)Mn(I)(PPh3)(NO)(eta-C5H4Me)][PF6]3.2Me2CO.1.5Et2O, [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)(dppm)2-trans][PF6]3.5Me2CO and [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)2{P(OEt)3}(dppm)-trans][PF6]3.4Me2CO, between the amine groups (the H-bond donors) at the Ru(III) site and the oxygen atoms of solvent molecules or the fluorine atoms of the [PF6]- counterions (the H-bond acceptors).     

Six-membered cyclometallated derivatives of platinum(II) derived from 2-benzylpyridines. Crystal and molecular structure of [Pt(L)(Ph3P)Cl] (HL = 2-(1-methylbenzyl)pyridine)

The reaction of K₂[PtCl₄] with 2-(1-methylbenzyl)pyridine, HL, and 2-benzylpyridine, HL', affords the cyclometallated species [{Pt(L)Cl}₂] (1) and [{Pt(L')Cl}₂] (2), respectively. The chloride bridge in complex 1 can be split by neutral or anionic species to give the monomeric, [Pt(L)(Ph₃P)Cl], as two isomers, trans-P-Pt-C (3) and trans-P-Pt-N, (4), [Pt(L)(py)Cl] (5), [Pt(L)(CO)Cl] (6), [Pt(L)(CNCH₂SO₂C₆H₄CH₃-4)Cl] (7), [Pt(L)(acac)] (Hacac = 2,4-pentanedione) (8), [Pt(L)(dppm)][BF₄] (dppm = bis(diphenyl-phosphino)methane) (9), [Pt(L)(dppe)][BF₄] (dppe = bis(diphenylphosphino)ethane) (10) and [Pt(L)(dipy)][BF₄](dipy = 2,2'-dipyridine) (11). Similarly, compound 2, by reaction with Ph₃P, affords [Pt(L')(Ph₃P)Cl], as two isomers, trans-P-Pt-C (12) and trans-P-Pt-N (13). Reaction of compounds 1 or 4 with AgBF₄ in acetonitrile affords [Pt(L)(CH₃CN)₂IBF₄] (14) or [Pt(L)(Ph₃P)-(CH₃CN)][BF₄] (15). From these, [Pt(L)(Ph₃P)₂][BF₄] (16), [Pt(L)(Ph₃P)(CO)][BF₄] (17) and [Pt(L)(Ph₃P)(py)][BF₄] (18), can be obtained by displacement of the coordinated acetonitrile. The new complexes were characterized by IR, ¹H and ³¹P NMR and FAB-MS spectroscopic techniques. The NMR spectra at room temperature of most of the species derived from HL give evidence for the presence in solution of two diastereomers a and b. The structure of one diastereomer of complex 4 has been solved by single crystal X-ray diffraction, 4b. The platinum atom is in an almost square planar geometry with a P-Pt-N trans arrangement: Pt-N = 2.095(3), Pt-C = 1.998(4), Pt-P = 2.226(1) and Pt-Cl = 2.400(1) Å. The six-membered cyclometallated ring is in a boat conformation, with the CH₃ group in an equatorial position, i.e pointing away from the metal. Attempts to obtain [{Pt(L″)Cl}₂] (HL″ = 2-(dimethylbenzyl)pyridine), afforded an insoluble product heavily contaminated by platinum metal; treatment of this crude material with Ph₃P gave [Pt(L″)(Ph₃P)Cl] (19).     

Formation of Trinuclear Rhodium‐Hydride Complexes [{Rh(PP*)H}3‐ (μ2‐H)3(μ3‐H)][anion]2—During Asymmetric Hydrogenation?

Recently described and fully characterized trinuclear rhodium‐hydride complexes [{Rh(PP*)H}₃(μ₂‐H)₃(μ₃‐H)][anion]₂ have been investigated with respect to their formation and role under the conditions of asymmetric hydrogenation. Catalyst–substrate complexes with mac (methyl (Z)‐ N‐acetylaminocinnamate) ([Rh(tBu‐BisP*)(mac)]BF₄, [Rh(Tangphos)(mac)]BF₄, [Rh(Me‐BPE)(mac)]BF₄, [Rh(DCPE)(mac)]BF₄, [Rh(DCPB)(mac)]BF₄), as well as rhodium‐hydride species, both mono‐([Rh(Tangphos)‐ H₂(MeOH)₂]BF₄, [Rh(Me‐BPE)H₂(MeOH)₂]BF₄), and dinuclear ([{Rh(DCPE)H}₂(μ₂‐H)₃]BF₄, [{Rh(DCPB)H}₂(μ₂‐H)₃]BF₄), are described. A plausible reaction sequence for the formation of the trinuclear rhodium‐hydride complexes is discussed. Evidence is provided that the presence of multinuclear rhodium‐hydride complexes should be taken into account when discussing the mechanism of rhodium‐promoted asymmetric hydrogenation.     

Transition metal complexes with bidentate ligands spanning trans-positions. IV. Preparation and properties of some rhodium and iridium complexes of 2,11-bis(diphenylphosphinomethyl)benzo [c]phenanthrene

The bidentate phosphine 2,11-bis(diphenylphosphinomethyl)benzo [c]phenanthrene ( 1 ) has been used to prepare the mononuclear, square planar complexes trans-[MX(CO)( 1 )] and trans-[M(CO)(CH₃CN)( 1 )][BF₄] (M = Rh, Ir; X = Cl, Br, I, NCS). It is found that the tendency of these complexes to form adducts with CO, O₂ and SO₂ is significantly lower than that of the corresponding Ph₃P complexes. The oxidative-addition reactions of complexes trans-[IrX (CO) ( 1 )] with hydrogen halides give the six-coordinate species [IrHX₂(CO) ( 1 )]. The complexes [IrH₂I (CO) ( 1 )] and [IrH₂L (CO) ( 1 )] [BF₄] (L = CO and CH₃CN) have been obtained from hydrogen and the corresponding substrates. The model compounds trans-[MCl (CO) (Ph₂PCH₂Ph)₂] (M = Rh, Ir), trans-[Ir (CO) (CH₃CN) (Ph₂PCH₂Ph)₂] [BF₄], [IrHCl₂(CO)(Ph₂PCH₂Ph)₂] and [IrH₂(CO)₂(Ph₂PCH₂Ph)₂] [BF₄] have been prepared and their special parameters are compared with those of the corresponding complexes of ligand 1 . The influence of the static requirements of this ligand on the chemistry of its rhodium and iridium complexes is discussed.     

Utilization of CS2 as a source of C1 synthetic units for the preparation of bis(alkylthio)methanes and alkyl dithioformates

Double insertion of CS2 into two Ru-H bonds of [(dppm)2Ru(H)2] (dppm = Ph2PCH2PPh2) affords the methanedithiolate complex [(dppm)2Ru(eta2-S2CH2)]. The methanedithiolate moiety has been functionalized using 2 equiv of RX resulting in bis(alkylthio)methane derivatives [(dppm)2Ru(RSCH2SR)][X]2. The bis(alkylthio)methane complex loses the bis(alkylthio)methane moiety under very mild conditions and in turn affords the [(dppm)2RuX2] complex from which the starting dihydride [(dppm)2Ru(H)2] has been regenerated via reaction with KOH/EtOH. On the other hand, insertion of CS2 into one Ru-H bond of [(dppe)2Ru(H)2] (dppe = Ph2PCH2CH2PPh2) followed by functionalization using RX results in alkyl dithioformate complex trans-[(dppe)2Ru(H)(SC(SR)H)][X]. In this case also, the alkyl dithioformate moiety gets eliminated under very mild conditions to afford the [(dppe)2Ru(H)(X)] derivative from which the starting dihydride has been regenerated via reaction with NaBH4. The reactions presented here constitute utilization of CS2 as a C1 synthetic source for the generation of useful organic compounds.     

Synthesis,Structures, Ligand Substitution Reactions,and Electrochemistry of the Nitrile Complexes cis‐[Ru(dppm)2Cl(NCR)]+ PF6– (dppm = Bis(diphenylphosphino)methane,R = CH3, C2H5, tBu,Ph)

Isomerically pure nitrile complexes cis‐[Ru(dppm)₂Cl(NCR)]⁺ ( 2 a – d ) are formed upon chloride displacement from cis‐[Ru(dppm)₂Cl₂] ( 1 ) or, alternatively, by ligand substitution from the acetonitrile complex 2 a . This latter approach does also allow for the introduction of pyridine ( 3 a , b ), heptamethyldisilazane ( 4 ) or isonitrile ligands ( 5 ). All complexes are obtained as the configurationally stable cis‐isomers. Only cis‐[Ru(dppm)₂Cl(CN^tBu)]⁺ slowly isomerizes to the trans from. The solid state structures of the CH₃CN, C₂H₅CN and the trans‐^tBuNC complexes were established by X‐ray crystallography. Electrochemical investigations of the nitrile complexes 2 a – d show in addition to a chemically reversible one‐electron oxidation an irrversible reduction step. In CH₂Cl₂ solution, cis‐ and trans‐[Ru(dppm)₂Cl₂] have been identified as the final products of the electrochemically induced reaction sequence.     

Ru-Fe异金属化合物及其在Au表面上SAM的电化学研究

为使不对称Ru-Fe化合物能在表面上自组装形成单分子膜,对trans-RuCl(dppm)₂(C≡CFc)[Fc=C₅H₄FeC₅H₅,dppm=(C₆H₅)₂PCH₂P(C₆H₅)₂](1)进行修饰,得到Ru(dppm)₂(C≡CFc)(C≡CPhOCH₃)(2),[Ru(dppm)₂(C≡CFc)(N≡CCH₂CH₂NH₂)][PF₆](3)和[Ru(dppm)₂(C≡CFc)(N≡CCH₂CH₂NHC(O)·(CH₂)₁₀SH)][PF₆](4),并详细研究了该系列化合物的电化学性质.循环伏安结果显示出Ru周围配体得失电子能力的差别,直接影响了Ru中心的氧化-还原性,但这种影响并没有通过共轭的炔键传递到二茂铁中的Fe中心.化合物4可以在Au表面上自组装形成稳定、有序的单分子膜.还利用循环伏安法研究了单分子膜的形成过程及其表面覆盖率.     

Pincer and diamine Ru and Os diphosphane complexes as efficient catalysts for the dehydrogenation of alcohols to ketones

The ruthenium and osmium complexes [MCl₂(diphosphane)(L)] (M=Ru, Os; L=bidentate amino ligand) and [MCl(CNN)(dppb)] (CNN=pincer ligand; dppb=1,4‐bis‐ (diphenylphosphino)butane), containing the N–H moiety, have been found to catalyze the acceptorless dehydrogenation of alcohols in tBuOH and in the presence of KOtBu. The compounds trans‐[MCl₂(dppf)(en)] (M=Ru 7 , Os 13 ; dppf=1,1′‐bis(diphenylphosphino)ferrocene; en=ethylenediamine) display very high activity and different substrates, including cyclic and linear alcohols, are efficiently oxidized to ketones by using 0.8–0.04 mol % of catalyst. The effect of the base and the comparison of the catalytic activity of the Ru versus Os complexes are reported. The ruthenium complex 7 generally leads to a faster conversion into ketones with respect to the osmium complex 13 , which displays better activity in the dehydrogenation of 5‐en‐3β‐hydroxy steroids. The synthesis of new Ru and Os complexes [MCl₂(PP)(L)] (PP=dppb, dppf; L=(±)‐trans‐1,2‐diaminocyclohexane, 2‐(aminomethyl)pyridine, and 2‐aminoethanol) of trans and cis configuration is also reported.     

σ-Silane Platinum(II) Complexes as Intermediates in C−Si Bond-Coupling Processes

Platinum complexes [Pt(NHC′)(NHC)][BAr^F] (in which NHC′ denotes a cyclometalated N-heterocyclic carbene ligand, NHC) react with primary silanes RSiH₃ to afford the cyclometalated platinum(II) silyl complexes [Pt(NHC-SiHR′)(NHC)][BAr^F] through a process that involves the formation of C−Si and Pt−Si bonds with concomitant extrusion of H₂. Low-temperature NMR studies indicate that the process proceeds through initial formation of the σ-SiH complexes [Pt(NHC′)(NHC)(HSiH₂R)][BAr^F], which are stable at temperatures below −10 °C. At higher temperatures, activation of one Si−H bond followed by a C−Si coupling reaction generates an agostic SiH platinum hydride derivative [Pt(H)(NHC′-SiH₂R)(NHC)][BAr^F], which undergoes a second Si−H bond activation to afford the final products. Computational modeling of the reaction mechanism indicates that the stereochemistry of the silyl/hydride ligands after the first Si−H bond cleavage dictates the nature of the products, favoring the formation of a C−Si bond over a C−H bond, in contrast to previous results obtained for tertiary silanes. Furthermore, the process involves a trans-to-cis isomerization of the NHC ligand before the second Si−H bond cleavage.     

Synthesis and intramolecular and interionic structural characterization of half-sandwich (arene)ruthenium(II) derivatives of bis(pyrazolyl)alkanes

Arene ruthenium(II) complexes containing bis(pyrazolyl)methane ligands have been prepared by reacting the ligands L' (L' in general; specifically L(1) = H(2)C(pz)(2), L(2) = H(2)C(pz(Me2))(2), L(3) = H(2)C(pz(4Me))(2), L(4) = Me(2)C(pz)(2) and L(5) = Et(2)C(pz)(2) where pz = pyrazole) with [(arene)RuCl(mu-Cl)](2) dimers (arene = p-cymene or benzene). When the reaction was carried out in methanol solution, complexes of the type [(arene)Ru(L')Cl]Cl were obtained. When L(1), L(2), L(3), and L(5) ligands reacted with excess [(arene)RuCl(mu-Cl)](2), [(arene)Ru(L')Cl][(arene)RuCl(3)] species have been obtained, whereas by using the L(4) ligand under the same reaction conditions the unexpected [(p-cymene)Ru(pzH)(2)Cl]Cl complex was recovered. The reaction of 1 equiv of [(p-cymene)Ru(L')Cl]Cl and of [(p-cymene)Ru(pzH)(2)Cl]Cl with 1 equiv of AgX (X = O(3)SCF(3) or BF(4)) in methanol afforded the complexes [(p-cymene)Ru(L')Cl](O(3)SCF(3)) (L' = L(1) or L(2)) and [(p-cymene)Ru(pzH)(2)Cl]BF(4), respectively. [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) formed when [(p-cymene)Ru(L(1))Cl]Cl reacts with an excess of AgPF(6). The solid-state structures of the three complexes, [(p-cymene)Ru{H(2)C(pz)(2)}Cl]Cl, [(p-cymene)Ru{H(2)Cpz(4Me))(2)}Cl]Cl, and [(p-cymene)Ru{H(2)C(pz)(2)}Cl](O(3)SCF(3)), were determined by X-ray crystallographic studies. The interionic structure of [(p-cymene)Ru(L(1))Cl](O(3)SCF(3)) and [(p-cymene)Ru(L')Cl][(p-cymene)RuCl(3)] (L' = L(1) or L(2)) was investigated through an integrated experimental approach based on NOE and pulsed field gradient spin-echo (PGSE) NMR experiments in CD(2)Cl(2) as a function of the concentration. PGSE NMR measurements indicate the predominance of ion pairs in solution. NOE measurements suggest that (O(3)SCF(3))(-) approaches the cation orienting itself toward the CH(2) moiety of the L(1) (H(2)C(pz)(2)) ligand as found in the solid state. Selected Ru species have been preliminarily investigated as catalysts toward styrene oxidation by dihydrogen peroxide, [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) being the most active species.     

16-electron elongated dihydrogen complex stabilized by agostic interaction

A 16-electron dicationic dihydrogen complex [Ru(eta2-H...H)(PP)2][OTf]2 [4; PP = (C6H5CH2)2PCH2CH2P(CH2C6H5)2] has been prepared and characterized by protonating the precursor hydride complex [Ru(H)(PP)2)][OTf] (2) using HOTf. The hydride and dihydrogen complexes are stabilized via agostic interaction of the ortho C-H fragment of the phenyl ring on the benzyl group. The intact nature of the H-H bond in this derivative was established from the short spin-lattice relaxation time and the observation of a substantial J(H,D) of 22.0 Hz for the HD isotopomer. The H-H bond distance calculated from J(H,D) is 1.05 A, which falls under the category of elongated dihydrogen ligands.     

Kinetics and mechanism of ligand substitution reactions in [cis-M(CO)4(amine)(EPh3)] complexes (M = Mo,W; amine = pyridine,piperidine; E = As,Sb)

Group 6 metal carbonyls [cis-M(CO)₄(amine)(EPh₃)] (M = Mo, W; amine = piperidine (pip), pyridine (py); E = As, Sb) have been prepared and characterized. These complexes react thermally in chlorobenzene solutions with phosphine or phosphite ligands (= L) to give cis- and trans-M(CO)₄(L)(EPh₃) products. Kinetics of amine substitution by L in these complexes, under pseudo-first-order conditions, indicate that these reactions proceed by a rate law that is first-order in concentration of the metal complex. Rate constants and activation parameters for these reactions have been determined and are discussed. Competition studies for the [M(CO)₄(EPh₃)] intermediates show that these intermediates are highly reactive and react almost indiscriminately with various incoming nucleophiles with slight preference for more basic ones.     

Mobility of the dppm ligand in dinuclear RuRh complexes: formation of trinuclear RuRh2 and RuRhCu derivatives,and X-ray structure of a new heterobimetallic hydrido-bridged complex

Protonation of RuRhH₂Cl(COD)(dppm)₂ (1) (COD = 1,5 cyclooctadiene, dppm = bisdiphenylphosphinomethane) with HBF₄ · Et₂O gives [RuRhHCl(COD)-(dppm)₂]BF₄ (2), which has been shown to contain two chelating dppm ligands on ruthenium and a bridging hydride (RuH 2.08(7) Å; RhH 1.64(8) Å). Complex 2 reacts with CO to give [RuRhHCl(CO)₃(dppm)₂]BF₄ (3) containing two bridging dppm groups. Reaction of 1 with 0.5 molar equivalents of [RhCl(COD)]₂ at 80°C affords the trinuclear RuRh₂H₂Cl(PhPCH₂PPh₂)(COD)₂(dppm) (4) in low yield (25%), and that with CuCl at room temperature gives RuRhCuH₂Cl₂ (COD)(dppm)₂ (5) in high yield. Complex 5 is not very stable in solution and is converted into RuCuH₂Cl(dppm)₂ (6), a typical adduct between a Lewis acid and a hydride complex, which can be more easily obtained from RuH₂(dppm)₂ and CuCl in toluene at 80°C.     

Multimetallic assemblies using piperazine-based dithiocarbamate building blocks

Treatment of cis-[RuCl2(dppm)2] (dppm = bis(diphenylphosphino)methane) with dithiocarbamates, NaS2CNR2 (R = Me, Et) and [H2NC5H10][S2CNC5H10], yields cations [Ru(S2CNR2)2(dppm)2](+) and [Ru(S2CNC5H10)2(dppm)2](+), respectively. The zwitterions S2CNC4H8NHR (R = Me, Et) react with the same metal complex in the presence of base to yield [Ru(S2CNC4H8NR)(dppm)2](+). Piperazine or 2,6-dimethylpiperazine reacts with carbon disulfide to give the zwitterionic dithiocarbamate salts H2NC4H6(R2-3,5)NCS2 (R = H; R = Me), which form the complexes [Ru(S2CNC4H6(R2-3,5)NH2)(dppm)2](2+) on reaction with cis-[RuCl2(dppm)2]. Sequential treatment of [Ru(S2CNC4H8NH2)(dppm)2](2+) with triethylamine and carbon disulfide forms the versatile metalla-dithiocarbamate complex [Ru(S2CNC4H8NCS2)(dppm)2] which reacts readily with cis-[RuCl2(dppm)2] to yield [{Ru(dppm)2}2(S2CNC4H8NCS2)]. Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with [Os(CH=CHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] (BTD = 2,1,3-benzothiadiazole), [Pd(C6H4CH2NMe2)Cl]2, [PtCl2(PEt3)2], and [NiCl2(dppp)] (dppp = 1,3-bis(diphenylphosphino)propane) results in the heterobimetallic complexes [(dppm)2Ru(S2CNC4H8NCS2)ML(n))](m+) (ML(n) = Os(CH=CHC6H4Me-4)(CO)(PPh3)2](+), m = 1; ML(n) = Pd(C,N-C6H4CH2NMe2), m = 1; ML(n) = Pt(PEt3)2, m = 2; ML(n) = Ni(dppp), m = 2). Reaction of [NiCl2(dppp)] with H2NC4H8NCS2 yields the structurally characterized compound, [Ni(S2CNC4H8NH2)(dppp)](2+), which reacts with base, CS2, and cis-[RuCl2(dppm)2] to provide an alternative route to [(dppm)2Ru(S2CNC4H8NCS2)Ni(dppp)](+). A further metalla-dithiocarbamate based on cobalt, [CpCo(S2CNC4H8NH2)(PPh3)](2+), is formed by treatment of CpCoI2(CO) with S2CNC4H8NH2 followed by PPh3. Further reaction with NEt3, CS2, and cis-[RuCl2(dppm)2] yields [(Ph3P)CpCo(S2CNC4H8NCS2)Ru(dppm)2](2+). Heterotrimetallic species of the form [{(dppm)2Ru(S2CNC4H8NCS2)}2M](2+) result from the reaction of [Ru(S2CNC4H8NCS2)(dppm)2] and M(OAc)2 (where M = Ni, Cu, Zn). Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with Co(acac)3 and LaCl3 results in the formation of the compounds [{(dppm)2Ru(S2CNC4H8NCS2)}3Co](3+) and [{(dppm)2Ru(S2CNC4H8NCS2)}3La](3+), respectively. The electrochemical behavior of selected examples is also reported.     

Hydridocyanoalkyl complexes of platinum(II). Insertion of olefins into the PtH bond

The preparation and spectroscopic properties are described of some platinum(II) complexes having a hydride ligand cis or trans to an sp³ carbon, viz. trans-PtH(YCN)(PPh₃)₂ and cis-PtH(YCN)(LL) with YCN = C₂H₄CN, n-C₃H₆CN, o-CH₂C₆H₄CN and LL = bis(diphenylphosphino)-ethene or -ethane. The complexes trans-PtH(YCN)(PPh₃)₂ can add a fifth ligand in solution; the resulting five-coordinate complex was observed by ³¹P NMR in the case of PtH(C₃H₆CN)(PPh₃)₃. Insertion of olefin (ethen, 1-cyanoethene, norbornadiene, allen) into the PtH bond of the trans-hydrido complexes occurs to give cis-dialkyl complexes, but the cis-hydrido complexes are unreactive. The mechanism of insertion is discussed in terms of the kinetics and the geometries of reactants and products.